Age | Commit message (Collapse) | Author | Files | Lines |
|
Current list of out-of-tree patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Alexander Soldatov (1):
hwmon (occ): Add temp sensor value check
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Andrew Peng (1):
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
Benjamin Fair (1):
net: npcm: use bitmap functions on link mode params
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (10):
ARM: dts: witherspoon: Enable vhub
media: platform: Aspeed: Remove use of reset line
media: platform: Aspeed: Make reserved memory optional
media: dt-bindings: aspeed-video: Add missing memory-region property
clk: Aspeed: Setup video engine clocking
ARM: dts: aspeed-g5: Add video engine
ARM: dts: witherspoon: Enable video engine
ARM: dts: romulus: Enable video engine
hwmon (occ): Store error condition for rate-limited polls
hwmon (occ): Prevent sysfs error attribute from returning error
Edward A. James (1):
ARM: dts: Aspeed: Witherspoon: Update BMC partitioning
Jae Hyun Yoo (19):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
media: platform: aspeed: fix a kernel warning on clk control
media: platform: aspeed: refine clock control logic
media: platform: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
Joel Stanley (20):
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
ARM: config: aspeed-g5: Add video engine driver
ARM: dts: npcm: Remove use of skeleton.dtsi
dt-bindings: gpu: Add ASPEED GFX bindings document
drm: Add ASPEED GFX driver
drm: aspeed: Clean up Kconfig options
dt-bindings: rtc: Add on-chip ASPEED RTC documentation
rtc: Add ASPEED RTC driver
ARM: config: aspeed: Add P2A and EDAC drivers
ARM: config: aspeed-g5: Remove unused gadget drivers
ARM: config: aspeed-g5: Add ISL68137 and IR38064
Lei YU (2):
ARM: dts: palmetto: Fix flash_memory region
hwmon (occ): Fix extended status bits
Maxim Sloyko (3):
hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller
Patrick Venture (7):
ARM: dts: aspeed: zaius: Fix intersil compatibles
dt-bindings: misc: aspeed-p2a-ctrl: add support
drivers/misc: Add Aspeed P2A control driver
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
dt-bindings: Add ir38064 as a trivial device
dt-bindings: Add isl68137 as a trivial device
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
Tomer Maimon (18):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: dts: npcm7xx: Add PECI description
ARM: config: npcm7xx: Enable PECI driver
Vijay Khemka (1):
misc: aspeed-lpc-ctrl: make parameter optional
krzysztof.adamski@nokia.com (1):
pmbus: support for custom sysfs attributes
(From meta-nuvoton rev: 407bea06b4b689ca21f42640a204561fde503a1e)
Change-Id: Ia2af0bfd86c95f9c2c081ee1f8427a031e8a927a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from 5.0.8 up to the 5.0.13 stable
release.
(From meta-nuvoton rev: c6f9b32263629d735f0a3cfea38222bb8c409d2e)
Change-Id: I4aa9cd2fc68c3d9e5aee1b47f32e140477a510e2
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tomer Maimon (4):
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: dts: npcm7xx: Add PECI description
ARM: config: npcm7xx: Enable PECI driver
(From meta-nuvoton rev: d562aa85335cac84486f600ef0d38c2a13a021fd)
Change-Id: I9ae2bf07a50d489b6d329700f4cbdccef9825c69
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.7 stable release.
(From meta-nuvoton rev: ea7f9228b0d9a74dc28fb2fd3994b7164f82c7da)
Change-Id: I70ed7d3222efcb3840e5a3230f6629ed82d0c77d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
[Commit message from original kernel bump. We've since moved to 5.0.6
which contains more patches, and importantly a build fix]
Out of tree patches include 96 files changed, 18067 insertions and 144
deletions (most lines coming from Nuvoton patches, with the Nuvoton
device trees dominating).
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (7):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
Eddie James (1):
hwmon: occ: Fix power sensor indexing
Jae Hyun Yoo (12):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Joel Stanley (16):
iio: Add driver for Infineon DPS310
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
rtc: Add ASPEED RTC driver
dt-bindings: rtc: Add ASPEED description
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
Lei YU (1):
ARM: dts: palmetto: Fix flash_memory region
Mark Walton (1):
ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers
Tomer Maimon (16):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (3):
ARM: dts: aspeed: Add KCS support for LPC BMC
ARM: dts: aspeed: tiogapass: Enable KCS
ARM: dts: aspeed: tiogapass: Add sensors
(From meta-nuvoton rev: bfb9690ed2b6d15035ee904cb9c5f40b1ac32d16)
Change-Id: If20de6b8595a8e2426718030d63ddf209f0504cd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
oe-core branched in preparation for the upcoming 2.7 Yocto release and
as of 13e45ff requires core layer compatibility to "warrior" instead of
"thud". We'll retain compatibility for both until we do our own branch
or stop testing thud.
(From meta-nuvoton rev: 31c2543b6b367baa8984e07e4497827603ae704e)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I658fff16c88f8ed1b5f3ad7eacc2ff6b51dbb1d4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This addresses some assumptions made by systemd about having multiple
routing table support in the kernel. systemd-networkd will try and
provision mutliple routing tables + policies and will silently break
neighbor advertisement responses due to policy configurations on a
single table.
It also adds support for SLAAC based router settings and faster
duplicate address detection.
Size impact: 4k increase
(From meta-nuvoton rev: 31d724a134e2172643e1ab535372764913fbbacc)
Change-Id: Id8b532099505cf88ae39625f541ae3630ec9a284
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Avi Fishman (5):
bootm ${uimage_flash_addr} without other arguments
HowToBuild-npcm7xx.txt modified
emmc: npcm: sdhc: remove clock configuration
npcm: SWC_DEFS: version change (no effect on code)
Merge pull request #1 from warp5tw/npcm7xx
Denis Pynkin (1):
net: Use packed structures for networking
Tali Perry (6):
mach: npcm750: chagne mach number
uart: npcm750: switch to uart0 with support to old linux as well
Merge branch 'npcm7xx' of https://github.com/Nuvoton-Israel/u-boot into npcm7xx
env: NPCM750: change default environment parameters, so that it will boot from flash automatically. Change environemt location to 80100000 and size 64KB max
env: npcm7xx: change default environment to support latested openbmc changes
env: npcm7xx: bootargs: bug fix- use common bootargs
kfting (1):
meta-evb-npcm750: fix the build break due to gcc upgrade in openbmc 2.6
(From meta-nuvoton rev: 40c31d6e0eb48e7dd3413156feebe4a48a214268)
Change-Id: Ic2ace1c1d6b882cf6dd1d36c6ee88cf9424360c9
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Move the common variables from u-boot-nuvoton and
u-boot-fw-utils-nuvoton into a shared include file. This matches
Aspeed's U-Boot and makes it easier to update the SRCREV.
(From meta-nuvoton rev: f2ffed2c9345f79f11aab0b78f03f8350bce0476)
Change-Id: I44407ff06d25f6ad6ae00f97b53c7db4fd60064c
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The version number was bumped but the SRCREV variable was not.
(From meta-nuvoton rev: 128c655c921ce90e375d6073576bc3cd34a7fe9f)
Change-Id: If94d741f16aac5e3e125dae4e3241d8ba4dd50e8
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.15 and 4.19.16 stable
releases.
(From meta-nuvoton rev: b9e8eaeb472943ef02cfe51a219948cfd32f5dee)
Change-Id: I2560b8d7b59a3d94548eb55a410c4bcc1440a0cc
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update the Nuvoton kernel to a 4.19 based kernel, using the OpenBMC
kernel tree. This includes stable tree updates up to 4.19.14.
In addition i2c, mtd flash, adc, ethernet, post code, pci mailbox, spi,
pinctrl and device tree changes from work in progress patches are
included.
The defconfig is updated with the one from the kernel tree.
(From meta-nuvoton rev: 799316d1f01f68d3c195b7bd960ac93541c59004)
Change-Id: I95fbbbf3ca4cae220c32ec3bf6087caca3daaa60
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set compatibility to thud.
(From meta-nuvoton rev: 2c1b028da5da00dab71763b0ad1d3863af5ef67a)
Change-Id: I492f4e877e686bc6f07334bc9505c6cb7ee87a0b
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Whitespace fixes.
The LICENSE file referred to a mix of licenses but only listed MIT.
Add an Apache fallback for anything that isn't explicitly stated.
(From meta-nuvoton rev: f0403cadf1a796fe04b0ba21b224ff66be591e9e)
Change-Id: I2cd59cc2a968ecc4d381967e626978b1fa58edfa
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This rebases the OpenBMC kernel tree on a 4.18 base. This includes
patches backported from 4.19-rc1 and out of tree patches.
Avi Fishman (2):
USB host: Add USB ehci support for nuvoton npcm7xx platform
dt-bindings: usb: new ehci-npcm7xx dt
Dan Carpenter (1):
USB: host: ehci-npcm7xx: Fix some error codes in probe
Tomer Maimon (4):
dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
hwmon: Add NPCM7xx PWM and Fan driver
dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation
pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver
(From meta-nuvoton rev: a9a500c790336b9c63e99aa47a0f258affb40ffa)
Change-Id: Iadb2e5bf8740780437b9b68d6ea699b48f48290a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the kernel to the latest 4.17 stable release.
(From meta-nuvoton rev: 8730f2ecb7acdc3bf27c20a4d9b6c70fad9eab11)
Change-Id: If07d6ce0942671cd112fa05713850d42cf55317e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The new subtree paradigm has moved the meta-bsp layers to the top level
Change-Id: Ic4f64c39465be699bed3649e125e027d17daf938
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|