summaryrefslogtreecommitdiff
path: root/meta-nuvoton
AgeCommit message (Collapse)AuthorFilesLines
2019-06-10linux-nuvoton: 5.1.7 stable update, NPCM EDAC driverJoel Stanley2-2/+6
Enable EDAC in the kernel configuration. George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver (From meta-nuvoton rev: 382bd93faee564833cce0670ec458d76db6dbde5) Change-Id: I1627b91fa4464063f15b7a49b54829809594b3d4 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10linux-nuvoton: 5.1.6 stable updates, Qanta GSJJoel Stanley1-2/+2
This adds the Quanta GSJ NPCM730-based BMC and updates to the latest 5.1 stable tree. Fran Hsu (4): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree. ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree Tomer Maimon (1): dts: npcm750: modify SPI partition label names (From meta-nuvoton rev: c1e7672e39ca3f347da7c50a3a2d277594b6e7a6) Change-Id: I91e0f19c36d6edda4717bd4346bee3f233712d5e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-nuvoton: generate full flash image.Oshri Alkoby (NTIL)6-0/+555
Nuvoton's full flash image includes also a bootloader called Bootblock, and headers for it and for the u-boot. Generating headers and merging the Bootblock and the u-boot are being done by Nuvoton's binary generator tool (Bingo), which uses external paramteres from XML files for that. (From meta-nuvoton rev: 07a65b5a1cd4576367697ae5400482517e53d2d7) Change-Id: Iad274d6e0b42b96d5500bdb709e450c0c978338a Signed-off-by: Oshri Alkoby (NTIL) <oshri.alkoby@nuvoton.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-05-15linux-nuvoton: Move to v5.1Joel Stanley1-3/+3
Current list of out-of-tree patches: Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Alexander Soldatov (1): hwmon (occ): Add temp sensor value check Andrew Jeffery (8): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers Andrew Peng (1): ARM: dts: aspeed: Adding Lenovo Hr630 BMC Benjamin Fair (1): net: npcm: use bitmap functions on link mode params Benjamin Herrenschmidt (1): ARM: dts: aspeed: Add Power9 and Power9 CFAM description Christopher Bostic (1): iio: dps310: Temperature measurement errata Cyril Bur (1): misc: Add ASPEED mbox driver Cédric Le Goater (11): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency /dev/mem: add a devmem kernel parameter to activate the device ARM: dts: aspeed: Add "spi-max-frequency" property mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes Eddie James (10): ARM: dts: witherspoon: Enable vhub media: platform: Aspeed: Remove use of reset line media: platform: Aspeed: Make reserved memory optional media: dt-bindings: aspeed-video: Add missing memory-region property clk: Aspeed: Setup video engine clocking ARM: dts: aspeed-g5: Add video engine ARM: dts: witherspoon: Enable video engine ARM: dts: romulus: Enable video engine hwmon (occ): Store error condition for rate-limited polls hwmon (occ): Prevent sysfs error attribute from returning error Edward A. James (1): ARM: dts: Aspeed: Witherspoon: Update BMC partitioning Jae Hyun Yoo (19): dt-bindings: Add a document of PECI subsystem Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx dt-bindings: mfd: Add a document for PECI client MFD mfd: intel-peci-client: Add PECI client MFD driver Documentation: hwmon: Add documents for PECI hwmon client drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Add maintainers for the PECI subsystem ARM: dts: aspeed: peci: Add PECI node media: platform: aspeed: fix a kernel warning on clk control media: platform: aspeed: refine clock control logic media: platform: aspeed: change irq to threaded irq media: aspeed: remove IRQF_SHARED flag media: aspeed: reduce noisy log printing outs media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE media: aspeed: refine interrupt handling logic Joel Stanley (20): iio: Add driver for Infineon DPS310 ARM: dts: aspeed-ast2500: Update flash layout ARM: dts: aspeed: Add LPC mailbox node ARM: dts: aspeed: Enable mbox ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: Rename flash-controller nodes ARM: config: aspeed: Update defconfigs ARM: config: aspeed-g5: Add video engine driver ARM: dts: npcm: Remove use of skeleton.dtsi dt-bindings: gpu: Add ASPEED GFX bindings document drm: Add ASPEED GFX driver drm: aspeed: Clean up Kconfig options dt-bindings: rtc: Add on-chip ASPEED RTC documentation rtc: Add ASPEED RTC driver ARM: config: aspeed: Add P2A and EDAC drivers ARM: config: aspeed-g5: Remove unused gadget drivers ARM: config: aspeed-g5: Add ISL68137 and IR38064 Lei YU (2): ARM: dts: palmetto: Fix flash_memory region hwmon (occ): Fix extended status bits Maxim Sloyko (3): hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator ARM: dts: aspeed: zaius: add Infineon and Intersil regulators hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller Patrick Venture (7): ARM: dts: aspeed: zaius: Fix intersil compatibles dt-bindings: misc: aspeed-p2a-ctrl: add support drivers/misc: Add Aspeed P2A control driver ARM: dts: aspeed: Add aspeed-p2a-ctrl node ARM: dts: aspeed: quanta-q71: Enable p2a node dt-bindings: Add ir38064 as a trivial device dt-bindings: Add isl68137 as a trivial device Robert Lippert (2): ARM: dts: aspeed: zaius: update 12V brick I2C address ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots Tomer Maimon (18): dts: npcm7xx: Modify NPCM7xx device tree clk: nuvoton: add npcm750 clock function prototype initialization dt-binding: mtd: add NPCM FIU controller mtd: spi-nor: add NPCM FIU controller driver dt-bindings: i2c: npcm7xx: add binding for i2c controller i2c: npcm: driver for Poleg i2c controller dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree dt-binding: peci: add NPCM PECI documentation peci: npcm: add NPCM PECI driver ARM: dts: npcm7xx: Add PECI description ARM: config: npcm7xx: Enable PECI driver Vijay Khemka (1): misc: aspeed-lpc-ctrl: make parameter optional krzysztof.adamski@nokia.com (1): pmbus: support for custom sysfs attributes (From meta-nuvoton rev: 407bea06b4b689ca21f42640a204561fde503a1e) Change-Id: Ia2af0bfd86c95f9c2c081ee1f8427a031e8a927a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-05-07linux-nuvoton: Move to 5.0.13Joel Stanley1-2/+2
This includes security and bug fixes from 5.0.8 up to the 5.0.13 stable release. (From meta-nuvoton rev: c6f9b32263629d735f0a3cfea38222bb8c409d2e) Change-Id: I4aa9cd2fc68c3d9e5aee1b47f32e140477a510e2 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-04-12linux-nuvoton: PECI driverJoel Stanley1-1/+1
Tomer Maimon (4): dt-binding: peci: add NPCM PECI documentation peci: npcm: add NPCM PECI driver ARM: dts: npcm7xx: Add PECI description ARM: config: npcm7xx: Enable PECI driver (From meta-nuvoton rev: d562aa85335cac84486f600ef0d38c2a13a021fd) Change-Id: I9ae2bf07a50d489b6d329700f4cbdccef9825c69 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-04-12linux-nuvoton: Move to 5.0.7Joel Stanley1-2/+2
This includes security and bug fixes from the 5.0.7 stable release. (From meta-nuvoton rev: ea7f9228b0d9a74dc28fb2fd3994b7164f82c7da) Change-Id: I70ed7d3222efcb3840e5a3230f6629ed82d0c77d Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-04-08linux-nuvoton: Move to Linux 5.0Joel Stanley1-3/+3
[Commit message from original kernel bump. We've since moved to 5.0.6 which contains more patches, and importantly a build fix] Out of tree patches include 96 files changed, 18067 insertions and 144 deletions (most lines coming from Nuvoton patches, with the Nuvoton device trees dominating). Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Jeffery (8): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers Benjamin Herrenschmidt (1): ARM: dts: aspeed: Add Power9 and Power9 CFAM description Christopher Bostic (1): iio: dps310: Temperature measurement errata Cyril Bur (1): misc: Add ASPEED mbox driver Cédric Le Goater (7): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency /dev/mem: add a devmem kernel parameter to activate the device ARM: dts: aspeed: Add "spi-max-frequency" property Eddie James (1): hwmon: occ: Fix power sensor indexing Jae Hyun Yoo (12): dt-bindings: Add a document of PECI subsystem Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx dt-bindings: mfd: Add a document for PECI client MFD mfd: intel-peci-client: Add PECI client MFD driver Documentation: hwmon: Add documents for PECI hwmon client drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Add maintainers for the PECI subsystem ARM: dts: aspeed: peci: Add PECI node Joel Stanley (16): iio: Add driver for Infineon DPS310 drm: Add ASPEED GFX driver drm: aspeed: Debugfs interface for GFX registers dt-bindings: gpu: Add ASPEED GFX bindings document rtc: Add ASPEED RTC driver dt-bindings: rtc: Add ASPEED description ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node ARM: dts: aspeed-ast2500: Update flash layout ARM: dts: aspeed: Add LPC mailbox node ARM: dts: aspeed: Enable mbox ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: Rename flash-controller nodes ARM: config: aspeed: Update defconfigs Lei YU (1): ARM: dts: palmetto: Fix flash_memory region Mark Walton (1): ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers Tomer Maimon (16): dts: npcm7xx: Modify NPCM7xx device tree clk: nuvoton: add npcm750 clock function prototype initialization dt-binding: mtd: add NPCM FIU controller mtd: spi-nor: add NPCM FIU controller driver dt-bindings: i2c: npcm7xx: add binding for i2c controller i2c: npcm: driver for Poleg i2c controller dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller dt-binding: iio: add NPCM ADC documentation iio: adc: add NPCM ADC driver ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree Vijay Khemka (3): ARM: dts: aspeed: Add KCS support for LPC BMC ARM: dts: aspeed: tiogapass: Enable KCS ARM: dts: aspeed: tiogapass: Add sensors (From meta-nuvoton rev: bfb9690ed2b6d15035ee904cb9c5f40b1ac32d16) Change-Id: If20de6b8595a8e2426718030d63ddf209f0504cd Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-04-06meta-nuvoton: layer.conf: Add warrior compatibilityPatrick Venture1-1/+1
oe-core branched in preparation for the upcoming 2.7 Yocto release and as of 13e45ff requires core layer compatibility to "warrior" instead of "thud". We'll retain compatibility for both until we do our own branch or stop testing thud. (From meta-nuvoton rev: 31c2543b6b367baa8984e07e4497827603ae704e) Signed-off-by: Patrick Venture <venture@google.com> Change-Id: I658fff16c88f8ed1b5f3ad7eacc2ff6b51dbb1d4 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-02-14linux: net/ipv{4,6}: Enable commonly used functionalityWilliam A. Kennington III1-0/+8
This addresses some assumptions made by systemd about having multiple routing table support in the kernel. systemd-networkd will try and provision mutliple routing tables + policies and will silently break neighbor advertisement responses due to policy configurations on a single table. It also adds support for SLAAC based router settings and faster duplicate address detection. Size impact: 4k increase (From meta-nuvoton rev: 31d724a134e2172643e1ab535372764913fbbacc) Change-Id: Id8b532099505cf88ae39625f541ae3630ec9a284 Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-23u-boot-nuvoton: srcrev bump 196461383f7..5d036755c2eBenjamin Fair1-1/+1
Avi Fishman (5): bootm ${uimage_flash_addr} without other arguments HowToBuild-npcm7xx.txt modified emmc: npcm: sdhc: remove clock configuration npcm: SWC_DEFS: version change (no effect on code) Merge pull request #1 from warp5tw/npcm7xx Denis Pynkin (1): net: Use packed structures for networking Tali Perry (6): mach: npcm750: chagne mach number uart: npcm750: switch to uart0 with support to old linux as well Merge branch 'npcm7xx' of https://github.com/Nuvoton-Israel/u-boot into npcm7xx env: NPCM750: change default environment parameters, so that it will boot from flash automatically. Change environemt location to 80100000 and size 64KB max env: npcm7xx: change default environment to support latested openbmc changes env: npcm7xx: bootargs: bug fix- use common bootargs kfting (1): meta-evb-npcm750: fix the build break due to gcc upgrade in openbmc 2.6 (From meta-nuvoton rev: 40c31d6e0eb48e7dd3413156feebe4a48a214268) Change-Id: Ic2ace1c1d6b882cf6dd1d36c6ee88cf9424360c9 Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-23u-boot-nuvoton: split common vars into an include fileBenjamin Fair3-23/+17
Move the common variables from u-boot-nuvoton and u-boot-fw-utils-nuvoton into a shared include file. This matches Aspeed's U-Boot and makes it easier to update the SRCREV. (From meta-nuvoton rev: f2ffed2c9345f79f11aab0b78f03f8350bce0476) Change-Id: I44407ff06d25f6ad6ae00f97b53c7db4fd60064c Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-23linux-nuvoton: bump srcrev for 4.19.16Benjamin Fair1-1/+1
The version number was bumped but the SRCREV variable was not. (From meta-nuvoton rev: 128c655c921ce90e375d6073576bc3cd34a7fe9f) Change-Id: If94d741f16aac5e3e125dae4e3241d8ba4dd50e8 Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-18linux-nuvoton: Move to 4.19.16Joel Stanley1-1/+1
This includes security and bug fixes from the 4.19.15 and 4.19.16 stable releases. (From meta-nuvoton rev: b9e8eaeb472943ef02cfe51a219948cfd32f5dee) Change-Id: I2560b8d7b59a3d94548eb55a410c4bcc1440a0cc Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-18linux-nuvoton: Move to 4.19Joel Stanley2-20/+28
Update the Nuvoton kernel to a 4.19 based kernel, using the OpenBMC kernel tree. This includes stable tree updates up to 4.19.14. In addition i2c, mtd flash, adc, ethernet, post code, pci mailbox, spi, pinctrl and device tree changes from work in progress patches are included. The defconfig is updated with the one from the kernel tree. (From meta-nuvoton rev: 799316d1f01f68d3c195b7bd960ac93541c59004) Change-Id: I95fbbbf3ca4cae220c32ec3bf6087caca3daaa60 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-01-12meta-nuvoton: prepare for yocto 2.6Patrick Venture1-1/+1
Set compatibility to thud. (From meta-nuvoton rev: 2c1b028da5da00dab71763b0ad1d3863af5ef67a) Change-Id: I492f4e877e686bc6f07334bc9505c6cb7ee87a0b Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-24meta-nuvoton: License wording cleanupBrad Bishop3-14/+193
Whitespace fixes. The LICENSE file referred to a mix of licenses but only listed MIT. Add an Apache fallback for anything that isn't explicitly stated. (From meta-nuvoton rev: f0403cadf1a796fe04b0ba21b224ff66be591e9e) Change-Id: I2cd59cc2a968ecc4d381967e626978b1fa58edfa Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-18linux: Move to 4.18 based treeJoel Stanley1-3/+3
This rebases the OpenBMC kernel tree on a 4.18 base. This includes patches backported from 4.19-rc1 and out of tree patches. Avi Fishman (2): USB host: Add USB ehci support for nuvoton npcm7xx platform dt-bindings: usb: new ehci-npcm7xx dt Dan Carpenter (1): USB: host: ehci-npcm7xx: Fix some error codes in probe Tomer Maimon (4): dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation hwmon: Add NPCM7xx PWM and Fan driver dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver (From meta-nuvoton rev: a9a500c790336b9c63e99aa47a0f258affb40ffa) Change-Id: Iadb2e5bf8740780437b9b68d6ea699b48f48290a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28linux: Move to 4.17.18 stable releaseJoel Stanley1-2/+2
This updates the kernel to the latest 4.17 stable release. (From meta-nuvoton rev: 8730f2ecb7acdc3bf27c20a4d9b6c70fad9eab11) Change-Id: If07d6ce0942671cd112fa05713850d42cf55317e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-23[Subtree] Move board support packages to top levelDave Cobbley14-0/+306
The new subtree paradigm has moved the meta-bsp layers to the top level Change-Id: Ic4f64c39465be699bed3649e125e027d17daf938 Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>