| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This updates the kernel to include the ASPEED DRM driver.
Note that the defconfig update has no affect on the I2C support; it
drops out only due to being selected by other dependencies.
Joel Stanley (6):
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: ast2500-evb: Enable the GFX IP
ARM: dts: witherspoon: Enable the GFX IP
ARM: dts: aspeed-g5: Add DAC MUX userspace control
Change-Id: I084c4df8b7d4bcc183a865c9eabb0154570e0342
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Move the MTD partition rules to their own recipe under
udev rather than appending u-boot-fw-utils. Additionally
the rules are an artifact of the aspeed u-boot-fw-utils
configuration, so place the new recipe in the aspeed layer.
Tested: Built a witherspoon image
Change-Id: I1fec995dd75543b2630db29d78bfb29a1a5949d5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The convention seems to be that udev rule generating recipes go in
recipes-core/udev.
Tested: No functional change
Change-Id: I947a5f060e33b696cfa5528c09e164d047f78cae
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Without this kernel is unable to mount loop device, and cause the init
script failing to copy rofs into ram in legacy code update.
Resolves openbmc/openbmc#3064.
Tested: Successfully run legacy code update on Romulus.
Change-Id: I22cdff51ac24a8ca00e1ed2b5d1d06d827b9eb74
Signed-off-by: Lei YU <mine260309@gmail.com>
|
|
This seems to be the upstream convention. Update to match.
Change-Id: I51557baebee8890d983d878779a5dd76ffa309be
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This seems to be the upstream convention. Update to match.
Change-Id: Ie56cfd4cce1d1d49a3edeaf734fcfbbc665a55c8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
virtual/kernel was specified twice in the common Aspeed configuration.
Change-Id: I808d5359fbfb8986c6b194dc5c0a8dc1e5268999
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
We have 236 commits, 127 files changed, 17766 insertions(+), 2128
deletions(-). Some of these are backports from upstream. This list
does not include patches from the 4.13 stable releases, but we do
include those in the dev-4.13 branch.
1 Alexey Khoroshilov
34 Andrew Jeffery
1 Arnd Bergmann
1 Benjamin Herrenschmidt
1 Bhumika Goyal
1 Brad Bishop
1 Brendan Higgins
11 Christopher Bostic
1 Cyril Bur
14 Cédric Le Goater
49 Edward A. James
3 Gavin Shan
1 Guenter Roeck
8 Ivan Mikhaylov
1 Jacek Anaszewski
1 James Feist
7 Jeremy Kerr
72 Joel Stanley
2 Julia Lawall
1 Ken Chen
6 Lei YU
3 Milton Miller
1 Mykola Kostenok
1 Patrick Venture
2 Philipp Zabel
1 Rick Altherr
11 Samuel Mendoza-Jonas
2 Wei Yongjun
1 Xo Wang
1 Yong Li
Note that the 4.13 branch is EOL'd by the Linux community, and as such
should not be used for any products beyond development.
React to removal of occ hwmon instances from device trees with a
new startup/shutdown mechanism for phosphor-hwmon.
To fix this, a helper script will be used to start the service that
will pass the service the device tree name if it is present, or the
udev device path if it isn't. This script will still run from the
udev rule as before, but it will stop and start the service itself
without using the SYSTEMD_WANTS attribute.
As the path to the hwmon environment file matches the service
template argument, the paths for the OCC .conf files need to change
to match the device path instead of the previous device tree path.
Note that the pure device path would have the hwmon instance number
in it, but since that can't be known ahead of time it is stripped
off by the script that starts the service.
In addition, the pure device path for the OCCs contain several
':'s, meaning the associated environment files would also need to.
However, Yocto/Bitbake cannot handle a ':' in a file path, so they
are converted to '--'s by the script that starts the service and
phosphor-hwmon will convert them back internally when it starts.
The service file also needed some changes now that the service
lifetime is no longer controlled by systemd via SYSTEMD_WANTS.
This script will be called by a udev rule to start and
stop phosphor-hwmon when the hwmon device driver is started
and stopped.
It is passed both the device path and the OF_FULLNAME device
tree attribute. If OF_FULLNAME is present, it will start the
service with that as its template argument, otherwise it will
use the device path. This is to handle devices that aren't in
the device tree so they won't have OF_FULLNAME.
If a '/hwmon/hwmonN' is in the path it is removed, as this path
is also used as a path to an environment file and so must be
known ahead of time, which the hwmon instance N is not.
If there is a ':' in the path name, it is converted to a '--'.
Yocto/Bitbake cannot handle a ':' in file paths.
Resolves openbmc/openbmc#2953
Change-Id: I815be4d6d9e1cbea8428bb1bb8c332776ee71ece
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Move OpenBMC to Yocto 2.3(pyro).
Tested: Built and verified Witherspoon and Palmetto images
Change-Id: I50744030e771f4850afc2a93a10d3507e76d36bc
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Resolves: openbmc/openbmc#2461
|
|
This u-boot bump contains one patch:
Brad Bishop (1):
aspeed: Drop bootcmd support for legacy images
Rebase out of tree Witherspoon patches.
Change-Id: Ie8f4453a9d88823d7a97b9cd172089ead045024d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Move the u-boot recipes out of the Phosphor layer to the Aspeed layer.
When a SOC requires a specific u-boot tree, convention dictates the
BSP layer supporting the SOC includes recipes for that tree.
Tested: Built image and verified in witherspoon qemu
Change-Id: I4d5bade05566ae4cbcf5a2c637a1ed275c63ab36
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Create a common Aspeed layer configuration file to host pointers to
things like u-boot and kernel trees that support SOCs from Aspeed.
Tested: Built image and verified in witherspoon qemu
Change-Id: I9ad2720d8b4dff191e43be0b2c1514d25d7bf3ef
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
* add fsp2 meta
* add sunray2 evaluation board
* create zobmc ppc kernel for fsp2 based boards
* remove phosphor gpio keys
* only -k core-image-minimal working fine for now due to
problems with workbook and ipmi dependencies
Change-Id: Id84614a78bc875206ccc0450885261258e4adb26
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
|
|
The current uuid generation method just export the machine-id,
it does not match the systemd description
(https://www.freedesktop.org/software/systemd/man/machine-id.html):
This ID uniquely identifies the host. It should be considered
"confidential", and must not be exposed in untrusted environments,
in particular on the network. If a stable unique identifier that is
tied to the machine is needed for some application, the machine ID
or any part of it must not be used directly.
Backport the new sd_id128_get_machine_app_specific from systemd 233,
to replace the old uuid generation method.
Change-Id: I44e7b32ca951a9fa591761c3a3e4f27da04d2b6f
Signed-off-by: Yong Li <yong.b.li@linux.intel.com>
|
|
Include tune-arm1176jz-s.inc in the ast2500 SoC include file and set its
default tune to the core-specific variable. This enables Thumb package
builds and adds a compiler tune for the ARM1176 core.
AST2500 BMC developers won't likely observed any differences other than
seeing in the build log:
TUNE_FEATURES = "arm armv6 thumb arm1176jzs"
Tested: Inspected some packages with the bb utility that
TUNE_PKGARCH="armv6" and verified booting Zaius BMC.
Signed-off-by: Xo Wang <xow@google.com>
Change-Id: I70beab3d4e930b22dd4dd7b42e56971448396a7b
|
|
Add a tune file for the ARM1176JZ-S without the VFP FPU.
The Raspberry Pi machine layer contains a tune file for ARM1176JZF-S
which has a VFP FPU.
In addition to adding a core-specific compiler tuning option, this tune
enables packages to be compiled to emit Thumb instructions if
ARM_INSTRUCTION_SET = "thumb"
which will generate slower but more compact code.
Note that packages default to ARM-only code and even if enabled, the
compiler may choose not to emit Thumb code. Packages built with Thumb
support will have this reflected in the naming (armv6t instead of
armv6) but the architecture name will remain armv6.
Tested: Included the file into the build and verified it has no effect.
Signed-off-by: Xo Wang <xow@google.com>
Change-Id: Icad4be206b384e9b5157423b6c7880f0bd1dd3a3
|
|
Set SOC_FAMILY to aspeed-g4 and aspeed-g5 in ast2400 and ast2500 SoC
include files, respectively.
Include soc-family.inc so that the family is added to MACHINEOVERRIDES.
This is just minor cleanup that helps set the scene for creating Aspeed
model-specific include files (though I don't plan to do this).
Tested: Inspected OVERRIDES with the bb utility. MACHINEOVERRIDES for
witherspoon is now "openbmc:armv6:aspeed-g5:witherspoon:ast2500".
Signed-off-by: Xo Wang <xow@google.com>
Change-Id: I4175915b750b04f36e7b3bd354a55b6a4f7f51fb
|
|
This enables the userspace 'perf' tool and the corresponding kernel
configuration.
PERF_EVENTS is enabled on ast2500. It was already enabled on ast2400.
TIMER_STATS is enabled. This has low runtime impact when not enabled. It
defaults to off.
Change-Id: Iac1761aec999679b611e9bf9b51d0fe585d7ac5c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Change-Id: I0f8a18e9dece67f122b059b73f6bc1147255f5d5
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Change-Id: I6d6d21aea6e96408b3458afd5ea971fcc968e7e1
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Change-Id: I0ad9cd55f4320b63ff08417a1e546ca9517810d1
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Change-Id: I6d52d12e5409ffdf825234cf9f92ac36c39f0c62
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Allows fw_setenv/fw_printenv tools to access alternate bmc image.
Change-Id: I7f634fd1201f5df1af01f4407d9d8791557242ae
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Update fw_env config with two sections.
Update init script to handle redundant envs.
Patch u-boot. Can be removed when openbmc/u-boot is updated and recipe
bumped.
Resolves openbmc/openbmc#1937
Change-Id: I15137f55d960381a0b3fbb58c53090bbd5b86482
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Early in the dev-4.4 kernel lifetime a workaround was developed when the
fw_setenv command was failing. That issue does not appear with the
current kernel and the workaround can be removed.
Change-Id: I2a0f01f274b7ce76fbd1e80fe901cc86087ee5d8
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Edward A. James (8):
hwmon: (pmbus): Switch status registers to 16 bit
hwmon: (pmbus): Access word data for STATUS_WORD
hwmon: (pmbus): Add generic alarm bit for iin and pin
hwmon: (pmbus): Add debugfs for status registers
dt-bindings: i2c: Document the IBM CCF power supply version 1
hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver
Documentation: hwmon: Document the IBM CFF power supply
ARM: dts: aspeed: Witherspoon: Add power supplies to i2c bus
Jaghathiswari Rankappagounder Natarajan (1):
Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach control
Joel Stanley (2):
ARM: configs: aspeed: Add VLAN options
ARM: configs: aspeed: Enable IBM CFF Power Supply driver
Mykola Kostenok (2):
Documentation: dt-bindings: aspeed-pwm-tacho cooling device.
hwmon: (aspeed-pwm-tacho) cooling device support.
Change-Id: I78081bba5af67a1b1987fe256dd1f2ff3182472d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Change-Id: Iceafce789eb56f54494b6b9f7c3c2939e5b2087d
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Update defconfigs with new VUART kconfig symbol. The MAX31785 symbol
moves as it is now sorted with the PMBUS drivers.
Andrew Jeffery (4):
ARM: aspeed: Request WDTRST1 pinctrl function
dt-bindings: watchdog: aspeed: External reset signal properties
watchdog: aspeed: Support configuration of external signal properties
ARM: dts: aspeed: Witherspoon WDT1 external signal is push-pull
Brendan Higgins (1):
i2c: aspeed: fixed potential null pointer dereference
Cédric Le Goater (1):
leds: pca955x: fix typo
Jeremy Kerr (1):
drivers/serial: Add driver for Aspeed virtual UART
Joel Stanley (4):
Revert "drivers/serial: Add driver for Aspeed virtual UART"
serial: 8250: Add flag so drivers can avoid THRE probe
ARM: dts: aspeed: Update vuart compatible
ARM: configs: aspeed: Regenerate defconfigs
Change-Id: I151016c7ea98fc6552ce8ab54661dd1353834deb
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Requested by openpower partners doing bringup.
Change-Id: I86632bbdeb416a3fc268c1446727f0e6b799c050
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Upstream yocto is organized such that there is only bblayer for all
builds and overrides are used to customize recipes for any specific
platform.
It's possible for a group to use openbmc/openbmc as part of their
distro and run into issues with recipes that are comingled.
Change-Id: I5dc6e8c1448d95da1b5ee64b220e2955466cdf4e
Signed-off-by: Patrick Venture <venture@google.com>
|
|
Disable the 4KB erase block size from the spi nor to be able to
use UBIFS, since UBIFS requires the erase size to be at least 15KB.
Change-Id: I94de7daa82c4f925ad55c97f104dd0cb1d2d3dcb
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Andrew Jeffery (2):
hwmon: occ: Fix uninitialised variable warning
hwmon: max31785: Enable dual rotor if functionality is detected
Benjamin Herrenschmidt (2):
aspeed: Don't blast SCU04 at boot time
spi-nor: Add Winbond w25m512jv
Christopher Bostic (1):
drivers/hwmon: max31785 Set fan fault response based on dev tree
Joel Stanley (3):
iio: Add driver for Infineon DPS310
ARM: configs: aspeed_g5: Add DPS310 driver
ARM: dts: aspeed: Enable WDT2 for all platforms
Patrick Venture (1):
ARM: dts: aspeed: quanta-q71l: i2c-mux compat fix
Change-Id: I2a71977b959227762d62f803a3593c8fc16cc2c2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Andrew Jeffery (2):
hwmon: max31785: Clean up uninitialised values
hwmon: max31785: Use standard sysfs ABI for fast rotor inputs
Cédric Le Goater (5):
leds: pca955x: add device tree support
leds: pca955x: use devm_led_classdev_register
leds: pca955x: add GPIO support
dt-bindings leds: add pca955x
ARM: dts: aspeed: witherspoon: Add pca9552 device
Edward A. James (7):
fsi: occ: Fix 1 byte response and rc for O_NONBLOCK
hwmon: occ: Add new sensor versions and non-hwmon attributes
hwmon: occ: Add P8 OCC access
occ: hwmon and fsi probing fix
ARM: aspeed: Power9 dts and defconfigs for OCC
drivers: fsi: sbefifo: Fix buffer initialization
drivers: hwmon: occ: Add "master" attribute and remove status files
Joel Stanley (1):
ARM: configs: aspeed: Add pca9552 driver
Rick Altherr (1):
ARM: dts: aspeed: quanta-q71l: Add i2c and LED devices
Change-Id: I9d1307cd3d8e0eaa86197a2da858dd0d83174d6c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Move to 4.10.17. This incorporates all of the 4.10 stable fixes. 4.10 is
now end of lifed and does not receive further fixes.
New drivers:
- LPC snoop
- OCC SBE
- SBE FIFO
- Infineon IR35221
- Maxim MAX31785
- of_serial reset support
- Aspeed PWM and fan tach driver
- UCHI driver
- FSI device tree match support
New platforms:
- Mellanox MSN BMC
Config and device tree changes:
- Enable VMSPLIT_2G for ast2400. This is allows us to map all of the
mtd flash
- Fix device trees for ast2400 mtd support
Resolves openbmc/openbmc#1686
- Add CFAM layout to device tree
Resolves openbmc/openbmc#1697
- Enable new drivers
[the content below is for the changes made in c13af44db76bd1 and are
included so that the details are in openbmc history]
This is OpenBMC's third major kernel change. We now move to a 4.10 base,
where a larger amount of our driver support has been upstreamed.
- NCSI stack
- IRQ driver
- Watchdog driver
- Clocksource driver
- GPIO driver
- Pinmux driver
- ftgmac100 ast2500 support
- IPMI BT driver
- adm1275 driver fix
In addition, this contains backports of a significant amount of work
that was done post-4.10.
- LPC bindings
- Pinctrl enhancements
- Flash controller (spi-nor) basic support
- ast2500 GPIO support
- LPC host interface controller driver
- Aspeed ADC
- GPIO debounce support
- Pinconf (biasing and drive strength) driver
Finally, there is the work-in-progress that has been temporarly staged
in the dev tree while we get it reviewed and upstreamed.
- New I2C driver
- OCC driver
- LPC mailbox driver
- FSI core
- VUART driver
Defconfig updates
- Optmise options for network performance
- Update for upstreamed drivers (MTD driver was renamed, etc)
- Enable drivers that are in use
Legacy Yocto layer changes
- Remove palmetto GPIO hog patch. It is in the kenrel tree
Change-Id: I4b48b843572c8f8d547763f0d3cb5a6742bbf0e3
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Set IR35221 sensor config option to 'y'
Change-Id: I15f6c0489432489e0491ee0423e5de5d5676b15b
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
|
|
This enables the following for images built against the
meta-ast2400:
- aspeed-pwm-tacho
Change-Id: I89b3e56e98dd525104441946909c43b71ecd1366
Signed-off-by: Patrick Venture <venture@google.com>
|
|
Tested on witherspoon.
Change-Id: Ib74dd9b3acaf3528d029591645ca30add67de71e
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Change-Id: I2dfcbcdb27fe4aa2cb148de9d9ce2c0b5c5429d1
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
Change-Id: I8b608fb7e3f075b03516870ffbdb509b7c8afb83
Signed-off-by: Edward A. James <eajames@us.ibm.com>
|
|
This introduces hub master support for the FSI driver, enabling it to initialise
and talk to the FSI address space on the second socket of P9 machines.
UBI and UBIFS support is enabled in the kernel in preparation for using them in
OpenBMC.
The P9 device trees have been brought in sync with each other, with all now
describing the mailbox and lpc drivers necessary for using mboxd for host boot
firmware communication.
Adriana Kobylak (1):
arm: configs: aspeed: Add UBI support
Christopher Bostic (4):
drivers/fsi: Add hub master support
drivers/fsi: Move common read/write code into shared utility
drivers/fsi: Cleanup and retry op on error
drivers/fsi: Initialize slave link field
Edward A. James (3):
drivers: fsi: scom: Zero out user buffer first
drivers: fsi: Fix FSI core size checking user interfaces
drivers: fsi: i2c: Fixup probe to allow multiple engines
Joel Stanley (2):
ARM: dts: aspeed: Fix RAM size in Romulus and Witherspoon
ARM: dts: aspeed: Reserve RAM on P9 machines
Lei YU (1):
ARM: dts: aspeed: Enable Romulus mailbox and LPC control nodes
Change-Id: I26855d0fcce0ba435892cc1f031a0e1b10121f5c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Set a one-second timeout observed by the kernel after panicking. The
system will reset after the timeout is up.
The default timeout is 0, which means to wait indefinitely after panic.
Fixes openbmc/openbmc#1114
Signed-off-by: Xo Wang <xow@google.com>
Change-Id: I2eec2113fd7598f84dd91412b212ecc2a6949214
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This bumps the kernel to include a port of the FSI I2C driver from the
FSP. It drives the I2C master in the CFAM logic of the host processor
over FSI. This driver is being rewritten to be a proper i2c bus driver,
and as such will be removed once that driver is functionally equivalent.
There is also a fix for the Zaius UART.
A device tree for the Qanta Q71L, a non-openpower BMC, was added.
Christopher Bostic (3):
drivers/fsi: Add slave interrupt polling
drivers/fsi: Add Client IRQ Enable / Disable
drivers/fsi: Add sysfs file to adjust i-poll period
Edward A. James (5):
drivers: fsi: Add i2c client driver
drivers: fsi: i2c: Add engine access wrappers
drivers: fsi: i2c: probe fsi device for i2c client
drivers: fsi: i2c: add driver file operations and bus locking
drivers: fsi: i2c: boe engine
Joel Stanley (2):
drivers: fsi: Fix compilation warnings
aspeed: defconfig: add FSI_I2C driver
Rick Altherr via openbmc (2):
dts: Minimal device tree for Quanta Q71L BMC
arm: aspeed: zaius: Disable LPC reset for UART1
Change-Id: I4fd4e4e347cfe3dead1d84de8b79dc2121346b02
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Mailbox and LPC drivers:
drivers/mailbox: Add Aspeed mailbox driver
drivers/misc: Add Aspeed LPC control driver
dt-bindings: Add Aspeed LPC Control bindings
dt-bindings: Add Aspeed mailbox bindings
Enable the devices for Zaius and Witherspoon:
ARM: dts: aspeed-bmc-opp-witherspoon: Enable mailbox and LPC control
ARM: dts: aspeed-bmc-opp-zaius: Enable mailbox and LPC control node
ARM: dts: aspeed-g5: Add mailbox and LPC control node
Change-Id: I8030404c5c2f6d90935bbd6b26de7143f564f06d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
High res timers are useful in general, particularly for userspace apps
that call usleep().
Change-Id: I15be1b20141423650ed7f049a4b9ea53160260e3
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
U-Boot in Aspeed's SDK had a hack to manually relocate the ramdisk into
RAM because of a bug that caused the normal ramdisk relocation not to
happen if ATAGS was being used. Now that the ATAGS ramdisk relocation
bug is fixed, the load address and entrypoint of a ramdisk image are
ignored. The ramdisk is relocated to an address chosen by U-Boot and
the address is passed to the kernel.
Remove the override of oe_mkimage() in obmc-phosphor-image_types_uboot
as the default implementation is sufficient. This also removes the only
reference to a fixed ramdisk location in RAM.
Change-Id: Id92c8dc9ebeb905401e3056fcf841d982abbd3d1
Signed-off-by: Rick Altherr <raltherr@google.com>
|
|
- FSI changes
* Merge v1 of the FSI patchset as sent to lkml
* Merge Jeremy's raw driver for slave address-space access
* Define pins in Palmetto DTS
* Build the FSI SCOM driver for both ast2400 and ast2500 systems. The
driver has not been enabled in the device tree so it will not affect
any sytems at this stage. We will enable systems as the userspace
changes are made to support the kernel driver.
- Zaius
* Enable LPC to AHB mapping for flash access
- Update the ast2400 systems with the correct amount of RAM
* They systems have 512MB, minus the 16MB framebuffer, but our device
tree restricted them to 256MB.
* We now set them to 512MB with a 16MB no-map reservation at the top
for RAM for the PCI framebuffer
Change-Id: I7377e0f3bd075b78d923ff7295b133a75158e5d9
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The kernel driver for the iBT interface has landed upstream. In the
review process, the location of the device node was changed, as was the
naming of the ioctls and the kconfig symbol.
This change moves to the new version of btbridge, which brings in
autotools support from Matt Barth and a port to the new kernel driver
from Cédric Le Goater. The .bb file is modified to support the autotools
dependencies.
Convert build process to autotools
replace bt_host by bt_bmc
add a --device option
Corrected resulting errors from -Wall & -Werror.
We update the ast2400 and ast2500 defconfigs with the new config symbol,
and bump the kernel to the latest version. The kernel changes clean up
the old driver, and add the new one, including device tree changes.
ARM: dts: aspeed: Enable BT IPMI BMC device
ARM: aspeed: Add defconfigs for CONFIG_ASPEED_BT_IPMI_BMC
ipmi: add an Aspeed BT IPMI BMC driver
ARM: dts: aspeed: remove previous iBT definitions
ARM: aspeed: remove previous definitions in default config
Revert "misc: Add Aspeed BT IPMI host driver"
Change-Id: I8fcc43deaf5db71d587e34c4e4ed2111e7f3e182
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The rule was not creating the /dev/ttyVUART0 rule.
```
root@palmetto:~# udevadm info -q all /dev/ttyS0
P: /devices/platform/ahb/ahb:apb/1e787000.vuart/tty/ttyS0
N: ttyS0
E: DEVNAME=/dev/ttyS0
E: DEVPATH=/devices/platform/ahb/ahb:apb/1e787000.vuart/tty/ttyS0
E: MAJOR=4
E: MINOR=64
E: SUBSYSTEM=tty
E: TAGS=:systemd:
E: USEC_INITIALIZED=22674274
```
```
root@palmetto:~# systemctl status dev-ttyVUART0.device --no-pager
● dev-ttyVUART0.device
Loaded: loaded
Active: inactive (dead)
Nov 07 05:43:37 palmetto systemd[1]: dev-ttyVUART0.device: Job dev-ttyVUART0.device/start timed out.
Nov 07 05:43:37 palmetto systemd[1]: Timed out waiting for device dev-ttyVUART0.device.
Nov 07 05:43:37 palmetto systemd[1]: dev-ttyVUART0.device: Job dev-ttyVUART0.device/start failed with result 'timeout'.
```
This just sits there without returning:
```
root@palmetto:~# systemctl start dev-ttyVUART0.device
```
This is the reason udev does not trigger due to the lpc address on this system
being set to 0x417 when the rule expects 0x3f8:
```
root@palmetto:~# cat /sys/devices/platform/ahb/ahb\:apb/1e787000.vuart/lpc_address
0x417
```
- `obmc-console-server` is launched when `/dev/ttyVUART0` is created.
- `/dev/ttyVUART0` is created when a device with `lpc_address` of `0x3f8` is created
- `lpc_address` is configured by obmc-console-server.
- GOTO 10;
A fix would be to match the udev rule on the address of the peripheral. This is
what Cedric's original patch did:
```
SUBSYSTEM=="tty", ATTR{iomem_base}=="0x1E787000", SYMLINK+="tty-host"
```
Use the iomem_base in place of the lpc_address condition. The rule was
not matching with the driver==aspeed_vuart condition, so that was removed
as well.
Fixes: openbmc/openbmc#749
Fixes: openbmc/openbmc#718
Fixes: openbmc/openbmc#706
Change-Id: Ia55f47a84d657ab9572a8b0495420b1f56e16c02
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Minimaise the differences between the ast2400 and ast2500 defconifgs.
ast2500 changes:
- Enable IPv6
- Disable unused compression algorithms
- Enable SYN cookies
* resolves https://github.com/openbmc/openbmc/issues/504
- Enable kenrel hardening features
- Disable unused USB support
- Enable earlyprintk
- Disable support for ancient libc
ast2400 changes:
- Remove unused configfs support
- Disable IPv6 IPSec support
Change-Id: Id1e388723160541de80b26c378b87a1a2da8091e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Modified SERIAL_CONSOLES variable in the hardware
systems so that we can get rid of the hacks file.
The hacks file was used to manually stop the issue
but now that is taken out and the issue is handled
in the include files so the process doesn't start
in the first place. This fixes issue number 586.
Resolves openbmc/openbmc#586
Change-Id: I1eb54dae6cbec661f4b8865875e0fe5bd734c70c
Signed-off-by: Josh King <jdking@us.ibm.com>
|
