Age | Commit message (Collapse) | Author | Files | Lines |
|
meta-openpower: mmc: add reference to new bios reset service
Isaac Kurth (2):
item_updater_mmc: Add service calls to bios reset
openpower: mmc: physical reset triggers bios reset
Change-Id: I98a64189e3ce2da59f858e8f37bdb1363e50f6de
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Isaac Kurth <blisaac91@gmail.com>
|
|
openpower-pnor-code-mgmt: srcrev bump 9c2ef681e3..6fc7fcd6b1
Adriana Kobylak (2):
Add a new pldm feature option
Add support for the host PLDM transport that takes place of hiomap
(mboxd). Add this new feature to p10bmc.
Tested: Verified that tacoma (that doesn't support pldm) and p10bmc
(supports pldm) reached runtime.
Change-Id: I31e8beba5ff8a413b7b7fa7476f5f2403d3781dd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
Change-Id: I5ca16c6fa7bc616bfa9bc41c4f86d32fd92b0287
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Adriana Kobylak (6):
meson: Enable unit tests from x86
meson: Remove autotools support and update READMEs
functions: Catch sdbusplus exception
mmc: Move process host firmware to own service
mmc: Add update-bios-attr-table subcommand
functions: Set bios attribute property
Add two new service files for the mmc layout option that handle the
hostfw image files for hostboot to consume.
Change-Id: I908b649f5e56d119a8b590a843d8086fc89315e2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The changes converted the virtual pnor script from sh to bash, so need
to add bash as an RDEPENDS.
Adriana Kobylak (7):
generate-tar: fix shellcheck warnings
generate-ubi: fix shellcheck warnings
mmc/obmc-flash-bios: fix shellcheck warnings
ubi/obmc-flash-bios: fix shellcheck warnings
vpnor/obmc-vpnor-util: fix shellcheck warnings
Enable shellcheck
meson.build: switch to C++20 and meson >=0.57.0
Change-Id: Ic4c376cca3a028abcbc4e9df5dbf561173e1a1bf
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Add support for the mmc configuration option based on the
phosphor-mmc distro feature.
(From meta-openpower rev: dc65d339226402e55a1c04f2092268fff88f0686)
Change-Id: I344a357516ce4233fc4a3098a98670e80c78d139
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Adriana Kobylak (1):
vpnor: Move clearvolatile services to vpnor
Andrew Geissler (2):
ensure volatile clear waits on dependency
ensure volatile clear occurs after reset check
Also added to this commit is the movement of the service files from
ubi to vpnor (required with the above commits)
(From meta-openpower rev: 8b70bb894a3c16d10bf5d11fd26bbc9ea6c3bae1)
Change-Id: Ie464de2d4f7abad6e0a3ae2edc1df1b7c740e559
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
When using istep to boot a openpower based system, the flow is to issue
a "obmcutil chassison" and then boot the system using the istep tool.
istep does not use the host-start targets so therefore the host volatile
data is not cleared.
To ensure the data is always cleared, add the services to the
chassis-poweron target. The services need to remain within the host
start targets to handle warm reboot scenarios.
A normal "obmcutil poweron" will run both the host and chassis targets
but due to them being started at the same time (and letting systemd
figure out the ordering), the volatiles services will each only be run
once so there is no extra execution due to this commit. If a user were
to just issue a "obmcutil chassison" and then follow that with a
"obmcutil poweron" then the services would be run a second time. This
scenario is a debug only type situation and the extra second to re-run
the services would have very minimal impact.
There is a desire to move services from requires to wants relationships.
That was not done here because of the undefined behavior seen by the
host when this data is not cleared. The required behaviors is to fail
the power on or host start if these services fail.
Tested:
- Verified services were in obmc-chassis-poweron@0.target.requires
- Verified services were run as expected issuing a chassison
- Verified boot of system worked as expected and services were only
executed once during "obmcutil poweron"
(From meta-openpower rev: 9a967ec383a6f0d0a7e3d7a61d48b35c8aaf8f1c)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I5ea6ef27cd29d488fa3b7b3bf93a73f1112d1120
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Create a new virtual pnor bbclass to hold the updatesymlinks systemd
service file. This service file was moved because it doesn't depend
on the filesystem layout. Enable it if the virtual-pnor distro feature
is selected.
Tested: Verified the service file was still present on witherspoon
since the virtual pnor distro feature is part of ubi.
(From meta-openpower rev: 86c282465aa3d601fcc949233049558ee6851d30)
Change-Id: Id2d91e5bbcce93ed6d8c6750a0fa54fcf5a9615b
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use the script and systemd service files provided by openpower-software-manager.
Remove the op-pnor-msl.service from the ubi bbclass since it's already being
included from the main recipe.
Tested: Verified the service files were present on the image and PNOR updates
were successful.
(From meta-openpower rev: b3d3c717140ed02d116174d6496a7cb291369b78)
Change-Id: I4f77c9bb5869a2380247b7b6a1c772ab98cddf10
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OpenBMC executables should be installed in bin, reference:
https://github.com/openbmc/docs/blob/master/anti-patterns.md#placement-of-applications-in-sbin-or-usrsbin
The systemd service files for the openpower updater still run:
"ExecStart=/usr/bin/env obmc-flash-bios" so this change does
not affect them. A subsequent commit will change them to point
to bin.
Tested: Verified obmc-flash-bios was in /usr/bin/ in the BMC and
that a PNOR code update was successful.
(From meta-openpower rev: 200786912b557fdb9c254474d6732deea00979ab)
Change-Id: I00dd1f210aad03be1010b7c27b4a9cc898352e00
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Move ubi and static specific configures into bbclass, and inherit the
bbclass in openpower-software-manager recipe.
Tested: Verify Romulus build uses the static bbclass, and Witherspoon
uses the ubi bbclass.
(From meta-openpower rev: 2c2604d36e9415396baf1936b07a6a974b376cd9)
Change-Id: I23f68486ab95802785f7c5c22232a9f2b76d0341
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The new subtree model brings the subtrees up from the openbmc-machines
layer.
Change-Id: I58a03ae1be374bc79ae1438e65e888375d12d0c0
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|