Age | Commit message (Collapse) | Author | Files | Lines |
|
Since the VR may report negative current to BMC with
light loading, fine tune p12v_fan input/output current
lower threshold to -1
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I90c133d8ca5b9e399337fbe82472e5ed78e457a6
|
|
Lower CRITLO parameter to 1500.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I34383068cf1a3469a4f946bac862a60398634f62
|
|
Change to work-round for the kernel dts, so revert back
the following commit:
https://gerrit.openbmc-project.xyz/c/openbmc/meta-quanta/+/38877
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I21af8da577f2554b55886fc0133f94be77bc3520
|
|
Change to set CRITILO fan speed to 1800 RPM for fan failsafe
consideration according to the thermal team suggestion
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I2fef191d53b095bce6518583dea072700ff9a0e7
|
|
Set CRITILO fan speed to 600 RPM for host tool fan pwm calculation
(From meta-quanta rev: 3bee1ba439c56ccb37ee1465a7d4209f757db015)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ica5a0e030f32425f74c30ad5c2dd80b875227b87
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Do i2cool temperature calibration by phosphor-virtual-sensor
Also, as the phosphor-virtual-sensor generate the same D-Bus path,
chage the sensor name in hwmon to avoid the duplicate D-Bus path
(From meta-quanta rev: e1562d81de2b88bfee04cd2440133caa334b726f)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I31f000c8ab3cdcef100e95a2fd4de5ecb19ad14a
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Adjust the IOUT/POUT GAIN for ADM1272 since main source
changed for DVT/PVT HW
(From meta-quanta rev: 1c42eb58913bf5d2af803a774e623ebcc64ec252)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iae21f6ff4b840019b1b3e6dbf470212d71ff2514
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Since their pwm/tach are inverted physically, so work-round to
exchange the pwm/tach for fb_fan1 and fb_fan2
(From meta-quanta rev: b673c1f821cf041b4cb178ea09cd0fdb5095d421)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If148239ed199000b20d1782579f344a3e3bd72ee
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. adjust VR/Hotswap sensors threshold:
hotswap_iout current
vddcr_cpu_out voltage
vddcr_cpu_in current
vddcr_soc_out voltage
vddio_abcd/efgh_out voltage
2. adjust M value in sensors.yaml:
hotswap_iout current
vddcr_cpu_in current
(From meta-quanta rev: 2297095f43ad8bdff5bdfc2031acfa878ae4250b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I46310ec035c8294ee7147bc2d6f4b8e3b14e2828
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. Fan LCT = 3330 RPM
2. Minimum fan duty = 15%
3. NVMe Kp=1250,Ki=12
(From meta-quanta rev: b6ba0ea2d0007b1db640ea9d15d171ab7d79938e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I541dce79aab0b6dc48964cfb0657c19f13f9520f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Set threshold to filter out the negative noise value reported
from the VR sometimes
(From meta-quanta rev: 6a7ec660d02d63631a71b0bb1a13f00a55e93603)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id9f88bae0af56c99ab9528f7dd7d69cb4baa4a44
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. update fine tuned PID parameters
2. update sensors threshold
(From meta-quanta rev: 52b5953cf0c8c16d34bb8fa7b676316335dbf06e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icf6f74543552cf511d64fb6bb35bec279f7d0846
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
max34451:
adjust pwrgd_pvpp/pwrgd_pvddio/pwrgd_cpuvr GAIN/threshold
to show normal value
p3v_bat_adc:
adjust GAIN to meet the deviation requirement
(From meta-quanta rev: 47decce839819001140663ed8eed71ffb31efa2b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ia30c6abe2f95490d52d01052289ed86178b7cdce
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
VR temperature sensor names:
vddcr_cpu
vddcr_soc
vddio_abcd
vddio_efgh
p12v_mobo
p12v_fan
adm1272 temperature sensor name:
hotswap
Note:
Since adm1272 PMON_CONFIG didn't enable temperature monitoring by
default, add the driver patch to support it
(From meta-quanta rev: c680ebe0310ff72dd0811616830d22f5d5bfa108)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icb39c0827fe66faaa91d24b3fc93e15f53d21782
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. update max31725 temperature threshold
2. add adm1272 power GAIN
3. update vddcr_cpu_in/out current threshold
4. update pwrgd_pvpp/pwrgd_pvddio/pwrgd_cpuvr voltage threshold
5. update p12v_fan_in/out current threshold
6. add p12v_mobo_in/p12v_fan_in current GAIN
7. update p1v8_stby voltage m value
8. update vddcr_cpu_in current m value
9. update hotswap_iout current m value
10.nvme pwr_dis/en sensor type 0x00 -> 0xC0
(From meta-quanta rev: 444a37116b4902b0efffc1c013fc5f6ebf60aa69)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iac993f356a7b3fa8647973479477e5a5ce82655f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Change VR and NVMe presence sensors name to make them more
readable
VR:
vddq_abcd_in => vddio_abcd_in
vddq_abcd_out => vddio_abcd_out
vddq_efgh_in => vddio_efgh_in
vddq_efgh_out => vddio_efgh_out
p12v_1_in => p12v_mobo_in
p12v_1_out => p12v_mobo_out
p12v_2_in => p12v_fan_in
p12v_2_out => p12v_fan_out
(From meta-quanta rev: dfef06ba145eb60e59de7d74310489a6c467a75a)
Signed-off-by: George Hung <george.hung@quantatw.com>
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ie40b6eda8eb72b29a015884ec7bfe4fdd5734979
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. fix p12v_1/2 input/output voltages GAIN to get the correct value
2. fix p12v_1 output current threshold
(From meta-quanta rev: 58c91e5e8ad4e3c916bebbe76c958eafe0254e9e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I3394a2d33e22068509818e36b9dfd89e553703c5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Change the sensor name of fans:
fan2 -> fb_fan0
fan3 -> fb_fan1
fan4 -> fb_fan2
(From meta-quanta rev: 43bbb292c0d151841db415802849df965f6151ce)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If81cf92c50da512986344b31ba20d93af6dcf061
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Define the configuration files of the related sensors
and test pass
0001-lev-add-poweron-monitor-feature.patch
In-Review: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/28181
0002-lev-add-sensors-slow-readings.patch
In-Review: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/24337
(From meta-quanta rev: a66f2b941cede5fc15fe0d6d56ca2ac9352fdf77)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If7f767cbd952cde593e03d30c45572a21cc7c960
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|