Age | Commit message (Collapse) | Author | Files | Lines |
|
remove patch:
- Add power on monitor mechanism patch
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I932828d69948c3e0daa8fd428d620a75325e0ac9
|
|
- Add always restart to the service file
ref: https://gerrit.openbmc-project.xyz/42451
- Add retry 10 times when the service failed
- remove unused script
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ia3b027077d8cc9fae65013d38bf1ea730dbbbe42
|
|
The patch added an implicit boost dependency
Change-Id: Ic990f59d46101684d4576bfbba89ea0f4c9015e1
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Since the VR may report negative current to BMC with
light loading, fine tune p12v_fan input/output current
lower threshold to -1
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I90c133d8ca5b9e399337fbe82472e5ed78e457a6
|
|
Lower CRITLO parameter to 1500.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I34383068cf1a3469a4f946bac862a60398634f62
|
|
The 0001-sensor-Implement-sensor-ASYNC_READ_TIMEOUT.patch was merged:
https://gerrit.openbmc-project.xyz/24337
And SRCREV bumped here:
https://gerrit.openbmc-project.xyz/43005
Remove the patch to fix build failures.
Change-Id: I38dcaa56a2d184ed9c65a8a653a4d34a80d8f83b
Signed-off-by: Brandon Kim <brandonkim@google.com>
|
|
ref: https://gerrit.openbmc-project.xyz/24337
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id02a797a515363f74fcff27fc6ce9fc88a4bd9cc
|
|
Add Max/Min value setting in json config, so sel-logger
could show correct sensor value
ref: https://gerrit.openbmc-project.xyz/42073
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ieebb60fec73a83a17babd4a918645dd1a387d8b4
|
|
Using mapper wait to ExecStartPre would quit immdiately
while the D-Bus path is not active yet, so change to
add to "After=" to make sure it would wait until the
D-Bus path work
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I86029f4eba6b34b5c313ec9cc1578ef173d5c2aa
|
|
1. Remake the patch to fix includes error:
- Implement sensor "ASYNC_READ_TIMEOUT"
https://gerrit.openbmc-project.xyz/24337
- Add power on monitor mechanism
https://gerrit.openbmc-project.xyz/28181
2. Set negative-errno-on-fail flag as false
explicitly, otherwise it would be true
conflicts with update-functional-on-fail
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id550bc5261e6fa7218e2ff2731e1af51487ee376
|
|
The repository supports it, so switch it over in bitbake.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I8d96c79b395ee2614ddd869091569f245426c5c7
|
|
Change to work-round for the kernel dts, so revert back
the following commit:
https://gerrit.openbmc-project.xyz/c/openbmc/meta-quanta/+/38877
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I21af8da577f2554b55886fc0133f94be77bc3520
|
|
Set the Max/Min value to i2cool sensors to avoid the
abnormal current/thershold values in the SEL logs
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ie46e07a9a41f65b820258675f0e213e5434583cc
|
|
Change to set CRITILO fan speed to 1800 RPM for fan failsafe
consideration according to the thermal team suggestion
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I2fef191d53b095bce6518583dea072700ff9a0e7
|
|
Set CRITILO fan speed to 600 RPM for host tool fan pwm calculation
(From meta-quanta rev: 3bee1ba439c56ccb37ee1465a7d4209f757db015)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ica5a0e030f32425f74c30ad5c2dd80b875227b87
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Do i2cool temperature calibration by phosphor-virtual-sensor
Also, as the phosphor-virtual-sensor generate the same D-Bus path,
chage the sensor name in hwmon to avoid the duplicate D-Bus path
(From meta-quanta rev: e1562d81de2b88bfee04cd2440133caa334b726f)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I31f000c8ab3cdcef100e95a2fd4de5ecb19ad14a
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Adjust the IOUT/POUT GAIN for ADM1272 since main source
changed for DVT/PVT HW
(From meta-quanta rev: 1c42eb58913bf5d2af803a774e623ebcc64ec252)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iae21f6ff4b840019b1b3e6dbf470212d71ff2514
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Since their pwm/tach are inverted physically, so work-round to
exchange the pwm/tach for fb_fan1 and fb_fan2
(From meta-quanta rev: b673c1f821cf041b4cb178ea09cd0fdb5095d421)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If148239ed199000b20d1782579f344a3e3bd72ee
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. adjust VR/Hotswap sensors threshold:
hotswap_iout current
vddcr_cpu_out voltage
vddcr_cpu_in current
vddcr_soc_out voltage
vddio_abcd/efgh_out voltage
2. adjust M value in sensors.yaml:
hotswap_iout current
vddcr_cpu_in current
(From meta-quanta rev: 2297095f43ad8bdff5bdfc2031acfa878ae4250b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I46310ec035c8294ee7147bc2d6f4b8e3b14e2828
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. Fan LCT = 3330 RPM
2. Minimum fan duty = 15%
3. NVMe Kp=1250,Ki=12
(From meta-quanta rev: b6ba0ea2d0007b1db640ea9d15d171ab7d79938e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I541dce79aab0b6dc48964cfb0657c19f13f9520f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Set threshold to filter out the negative noise value reported
from the VR sometimes
(From meta-quanta rev: 6a7ec660d02d63631a71b0bb1a13f00a55e93603)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id9f88bae0af56c99ab9528f7dd7d69cb4baa4a44
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. update fine tuned PID parameters
2. update sensors threshold
(From meta-quanta rev: 52b5953cf0c8c16d34bb8fa7b676316335dbf06e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icf6f74543552cf511d64fb6bb35bec279f7d0846
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
max34451:
adjust pwrgd_pvpp/pwrgd_pvddio/pwrgd_cpuvr GAIN/threshold
to show normal value
p3v_bat_adc:
adjust GAIN to meet the deviation requirement
(From meta-quanta rev: 47decce839819001140663ed8eed71ffb31efa2b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ia30c6abe2f95490d52d01052289ed86178b7cdce
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
VR temperature sensor names:
vddcr_cpu
vddcr_soc
vddio_abcd
vddio_efgh
p12v_mobo
p12v_fan
adm1272 temperature sensor name:
hotswap
Note:
Since adm1272 PMON_CONFIG didn't enable temperature monitoring by
default, add the driver patch to support it
(From meta-quanta rev: c680ebe0310ff72dd0811616830d22f5d5bfa108)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icb39c0827fe66faaa91d24b3fc93e15f53d21782
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. update max31725 temperature threshold
2. add adm1272 power GAIN
3. update vddcr_cpu_in/out current threshold
4. update pwrgd_pvpp/pwrgd_pvddio/pwrgd_cpuvr voltage threshold
5. update p12v_fan_in/out current threshold
6. add p12v_mobo_in/p12v_fan_in current GAIN
7. update p1v8_stby voltage m value
8. update vddcr_cpu_in current m value
9. update hotswap_iout current m value
10.nvme pwr_dis/en sensor type 0x00 -> 0xC0
(From meta-quanta rev: 444a37116b4902b0efffc1c013fc5f6ebf60aa69)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iac993f356a7b3fa8647973479477e5a5ce82655f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Update Present/Pwrgood GPIOs number to nvme json config and
export them before running phosphor-nvme daemon
(From meta-quanta rev: 30cafdc73528c95d7658feb060f2552b65afb16a)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I3662fa44b65883ec46d61e693ed4b8804059f927
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Change VR and NVMe presence sensors name to make them more
readable
VR:
vddq_abcd_in => vddio_abcd_in
vddq_abcd_out => vddio_abcd_out
vddq_efgh_in => vddio_efgh_in
vddq_efgh_out => vddio_efgh_out
p12v_1_in => p12v_mobo_in
p12v_1_out => p12v_mobo_out
p12v_2_in => p12v_fan_in
p12v_2_out => p12v_fan_out
(From meta-quanta rev: dfef06ba145eb60e59de7d74310489a6c467a75a)
Signed-off-by: George Hung <george.hung@quantatw.com>
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ie40b6eda8eb72b29a015884ec7bfe4fdd5734979
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. fix p12v_1/2 input/output voltages GAIN to get the correct value
2. fix p12v_1 output current threshold
(From meta-quanta rev: 58c91e5e8ad4e3c916bebbe76c958eafe0254e9e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I3394a2d33e22068509818e36b9dfd89e553703c5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Since the sensor value type had been changed to double, we have to
modify the sensor value type to double and remove the scale in sensor
YAML config and also update the patch for hwmon fix for this changing
Change sensor type to double:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-dbus-interfaces/+/11739
hwmon fixes for the sensor type changing:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/34481
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/34983
(From meta-quanta rev: a661c1683e19abf70429fd263dde8f63f1b188b0)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ifdfe45c1119e0cc5d0e0fb180a91aada87631405
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Change the sensor name of fans:
fan2 -> fb_fan0
fan3 -> fb_fan1
fan4 -> fb_fan2
(From meta-quanta rev: 43bbb292c0d151841db415802849df965f6151ce)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If81cf92c50da512986344b31ba20d93af6dcf061
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Define the configuration files of the related sensors
and test pass
0001-lev-add-poweron-monitor-feature.patch
In-Review: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/28181
0002-lev-add-sensors-slow-readings.patch
In-Review: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-hwmon/+/24337
(From meta-quanta rev: a66f2b941cede5fc15fe0d6d56ca2ac9352fdf77)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If7f767cbd952cde593e03d30c45572a21cc7c960
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|