Age | Commit message (Collapse) | Author | Files | Lines |
|
This variable determines which XML image configuration files will be
used from npcm7xx-igps.
(From meta-quanta rev: c14953708446f32cc95f5b9a33bef6a0683b522d)
Change-Id: I86390644d88156c5afd91ecaccc8c43b2b0bd88b
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
When any SSD was not plugged, the bash script only sets RST_BMC_U2
and POWER_U2 GPIOs low for SSD0. Instead set the corresponding GPIOs
low for all unplugged SSDs.
(From meta-quanta rev: 4ac9d5f6173debda19b9b0d5da6075a48407b390)
Change-Id: I914d74634f93506d7911fdd3e1b75b73073ccdcc
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit is to fix rescaling issue by ignoring Dbus min/max.
(From meta-quanta rev: a21cf339050e234df0060e67f3aa713010d4fe47)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I7f736537784f9ab2e380ff8b4a4deb0f38c3df1b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify gsj-ipmid-whitelist.conf for the gsj project.
- Enable whitelist by default.
(From meta-quanta rev: 7f62bc2c5a71b9275b8b636dd6daad000288b2f4)
Change-Id: I52363809de53fabb0c6609e0bc564bdcd69c2e75
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set gain value to tune current and power value of hotswap and
test on gsj board pass.
(From meta-quanta rev: 1217b67bfd1f908a61602132014254bdc5a3c943)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: Ifde1dfe5f239ab9df0460cd8d2e557a0d6049c6e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ensure that the IPMI daemon has come up before configuring the USB
network interface so that clients won't see failing requests before IPMI
is ready.
(From meta-quanta rev: 33a9371a5da1a2dcf14c7d5e30dc4acd043afd4b)
Change-Id: I3c936a6c128cace80ab08f513f362a3cfd02fdac
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OE-core master will be dropping warrior soon; zeus is the next release.
(From meta-quanta rev: bee6771b647c0da99af4d06a3f60b7445d8427aa)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I7c5f88138fffd3ef7649270bc2e44354450018a8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
QUANTABASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-quanta rev: 170929b6044497d12e65a6a2c5e7025262c9d783)
Change-Id: I12defd008e095db3227e5cd39261f942abd1406c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit changes fan read path so as not to trigger fan-fail utility
in phosphor-pid-control but dual-rotor-fail service.
(From meta-quanta rev: ccd4657416374d12b1b8bd1bf545cf9ba8527419)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: Ifbc868d751b0a6194c2768bcfdaa8a9e231819c3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Remove gbmc-psu-hardreset.target from google-ipmi-sys to get
DelayHardReset to return the expected unspecified error.
(From meta-quanta rev: c95abb8caea6e56de78f009338ed656518928566)
Signed-off-by: P.K. Lee <p.k.lee@quantatw.com>
Change-Id: I910d976c0b37b88523e3351ad83ce60124cd28df
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The fan speed is lowered to 90 duty for thermal issue.
(From meta-quanta rev: 39041e2fa1e5b816c09925411081acc30010f782)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I5a14320a3687326e710976f8bab9bfa65f3b2865
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add _append_gsj to the environment files variable in gsj's
phosphor-hwmon bbappend in order to avoid affecting platforms.
Tested: Built for gsj and conf files were installed
(From meta-quanta rev: 79cabcb4faac7fe6a2f927ea5b9158ac432d8b58)
Change-Id: I49ea81f98a4aadbbec47aa251cf4ffe4a44b243f
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit is to assign MAC address to eth1, usb0_dev, usb0_host and
eth0 ports. The address of eth1 is read from EEPROM, while others are
obtained by adding one, two and three to eth1 respectively. We will
randomly generate address of eth1 once an error occurs.
The randomly-generated MAC address is of the form "00:1B:24:XX:XX:XX".
(From meta-quanta rev: b1c33ab8eb04ccf7ac77df58dca661a964cce293)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I000f818058989af2fe1f9457e22b4568ce47a8d5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Modify fan threshold according to quanta thermal team
data and test on gsj board pass.
(From meta-quanta rev: faedc464d99c795be1805d280564709ee5c002f2)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I7e93a25fe8ee79ab1f3fba879249ecf9043e5c97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Install phosphor-pid-control and detect-fan-fail into the final image in
order to enable fan control on the gsj platform.
(From meta-quanta rev: f2b76d699c94976d38108141c8c6ebc7923a85da)
Change-Id: Ibaadcce5f4330428cdfc5db3f31ae9e9b7b6dcb1
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
While rpm of dual rotor are lower than critical threshold
of fan, the script would stop phosphor-pid-control.service
and set other rotors pwm to 255 until fail rotor recover,
which test on gsj board pass.
(From meta-quanta rev: 94311c532fef9231cd71f9da0a2817f6d6575e7a)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I1ed670a48b2de28dda6da2fdee2ea0ba2bc1802a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This change adds fan control function with following features.
1) Fans will be at full speed while rebooting or a sensor is not ready.
2) Detect different skus automatically.
(From meta-quanta rev: bf5dffe65b849f9548f75b3a18d05ef7e899c4a3)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I9667e832109d6a06b6e4f6410de0df97481fd3fb
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update quanata-nvme-powerctrl process and
delete two duplication function and variable
init_once.sh:
1. Dump input pin information because of confirming HW signal.
2. HW POWER_U2 default is output high. If detect SSD is plugged, don't
need to initialize POWER_U2 again.
3. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then st
RST_BMC_U2 high.
nvme_powermanager.sh:
1. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then set
RST_BMC_U2 high.
2. Independent package for power control delete nvme_main DBus property
trigger and tranfer led trigger to nvem_main package.
(From meta-quanta rev: e689ff4990c9d76bb54c89f37831d23ff31993d2)
Change-Id: Idb1faff9f30785c5cc168adfe18173ea93e7a146
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add shared nvme_powerctrl_library script for mantain function
It could be easy review steps with specification.
(From meta-quanta rev: a9607d7703020f46598b28a4d1cea7be6997b47a)
Change-Id: I7d7471005d253a3a0cca6bbcc083d0bfcf7efbc6
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
in gsj.
- Set default TimeOwner to "Host"
- Set default TimeSyncMethod to "Manual"
(From meta-quanta rev: 5b11c82db0edf49711a8e81af12efb579b2c64fd)
Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Change-Id: Id9ed58fd24d064f798d8e01b2239dfdc516c4d00
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add sensor ucd90160 to hwmon, modify exists sensor
threshold and test on gsj board pass.
(From meta-quanta rev: eb4958ddd1081f856c7876cac8a21b166fee28a7)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I4a06978e081653ac27097342bc5cd2dd10816c7e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update design, process, test, todo subject included:
1. The new design follow PCI Express Card Electromechanical
Specification. It could review refer to specification section.
2. The new design and specification don't mention about SSD and LED
property so delete update led property and nvme_main property steps.
3. Update PCI clock function has been implemented so remove
TODO subject.
4. Improve initail power-up and service execute sequence.
5. Fix some grammer sentenses.
(From meta-quanta rev: 4d42bc87aa4aa61533572e2f9c4645cfe5a58745)
Change-Id: I622b7a054afc64f3fee5c37b29b99d856bb56558
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Change fru id test on gsj board pass.
(From meta-quanta rev: 13a9b58e3709db4fa9f449931934d5d457e0b079)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: Iccdc73fa39cdd22167ab82351c91887b340f6f24
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify M value of fan
- Change label P12V_BRIC_Current to P12V_BRIC_Curr
- Add led fault sensors
(From meta-quanta rev: d8ab351499b60975da4057f8c53dbaa2c9457461)
Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Change-Id: I68f42c48a0c19b935b0d281d3dce017315354068
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For mateched new design, the package will be independent.
1. This package will not depends on nvme.manager.service
and the log messages directly store on syslog.
2. The nvme_powermanager.service must wait for nvme_gpio.service
initial complete all GPIO setting.
(From meta-quanta rev: 5a161f129ac473c98b5fd07b4a152e697e02eef7)
Change-Id: I878a3de62dd0009d011122d1b0d3478931eaa852
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Remove the product info area fields as these aren't used in the new FRU
format.
Tested: Read HSBP FRU over ipmitool and the contents were as expected
(From meta-quanta rev: 55ef60d4021d3c76ebca8fc000542efc2685d89f)
Change-Id: I389df7d422e738827689415d7dcc0c714a96c045
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-quanta rev: 029742e6738abb943ebe74681435df99f31f4e72)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia0c21a2353f7d8e60b5981691c18ededa43dc6e1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Commit GSJ project configurations.
1. Add configuration for u-boot-evn.
2. Update kernel configuration.
3. Add gsj suffix to some properties.
Tested: Build Quanta GSJ image and load on the GSJ BMC module.
Ensure that BMC boots to console successfully.
(From meta-quanta rev: fc91a4374e2576e940f9c70f34cfe5af9d0aa727)
Change-Id: I2de3b60db65f744bdc1a573efd063b999aa2536e
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
1) Locate LEDs of SSD can be controlled by using IPMI.
Usage:
Read the state of locate LED (e.g. the sensor number is 0x40):
$ ipmitool -H <bmc_ip> -U root -P <password> -I lanplus raw 0x04 0x2D 0x40
Assert the specific locate LED (e.g. the sensor number is 0x40):
$ ipmitool -H <bmc_ip> -U root -P <password> -I lanplus raw 0x04 0x30 0x40 0x00 0x00 0x02
Deassert the specific locate LED (e.g. the sensor number is 0x40):
$ ipmitool -H <bmc_ip> -U root -P <password> -I lanplus raw 0x04 0x30 0x40 0x00 0x00 0x00 0x00 0x02
2) Add sensor information of ucd90160 in sensor map
3) Correct paths of nvme and BmcECC
(From meta-quanta rev: ca52cc570fdfb9b7ca85159103393724cfcec3dd)
Change-Id: I06d0ba957b4659da2eb59af04200b937ce89da79
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Modify action of group LOCATE LED:
- Add fault LED when assert group LOCATE for LED group manager.
- Change Period from 1000 to 250
(From meta-quanta rev: b167f05433580dba7a466fc6f1581bca0a939e79)
Signed-off-by: tony lee <tony.lee@quantatw.com>
Change-Id: I179b7f68fc50e79b1a39ff8a61c77ec54da86801
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This application isn't used on gsj. Remove from the rootfs.
(From meta-quanta rev: 73117dbc6ab80e6174f38b41919fb7297e37296a)
Change-Id: Iccaed80d19b20dc0916d00282443f5b0b537f394
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This change disables ipv4 link local auto-configuration.
(From meta-quanta rev: 0b6836f812f2ea864acc9ee9ede9e700ff504217)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: If2921b733f6fe314f35cf925d8a9f79a9480e11a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a sensor for each fan PWM channel to the IPMI sensor map.
(From meta-quanta rev: 9daae7df1f77542bce03096cd523febe97555402)
Change-Id: I1e142ad3a1596a378e749aa326e6082b4cb84c21
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a PWM_TARGET variable for each fan that describes which PWM channel
controls that fan.
(From meta-quanta rev: 55f0bad12ec1a677e155db82e9f23678488a9aa0)
Change-Id: Ib4c94ba599017b24b475fcd680e642ad47f36007
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify path of nvme to base 0
- Correct assert paths of BmcECC
(From meta-quanta rev: d944c1a2c7ea86802171bae2f6312c910311a6e1)
Signed-off-by: tony lee <tony.lee@quantatw.com>
Change-Id: Ib701c577cf85ba22dc5eae9be313585771cd2f88
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The names of the i2c bus nodes in the device tree changed from
i2c-bus@xxxx to just i2c@xxx. Update the phosphor-hwmon sensor
configuration paths to match.
(From meta-quanta rev: 50c57e091989c4d3078147bfb42146ea22d273c5)
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: I8bded436fc9707c063d15794f182bb9024f98889
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add gsj machine suffix to phosphor-ipmi-host recipe append such that it
won't impact non-gsj machines built in a mixed-machine environment.
(From meta-quanta rev: 6cf4e7ea3a777256232f62212bce040c13423135)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I36c8e8753c4b5048870044d419f40af79718c0fe
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use the multi-user target instead of the openbmc-custom obmc-standby
target for services.
(From meta-quanta rev: c886d1d4b761ee20c7f54a201ce5f74e5537b5fb)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ie49f53850ed65bf4a71c959fe30bb1e36c41b725
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The usb-network and quanta-nvme-powerctrl recipes aren't part of
phosphor, so move them to the machine-spceific recipes-gsj folder
instead.
(From meta-quanta rev: a5787aa49f88aac01eed521e1b3e8f85b73f5c54)
Change-Id: I22b68e1e83dbd0ee3f98288052ffb302b7ef1ff5
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Move the phosphor-ipmi-host modifications under the ipmi folder to
mirror the meta-phosphor layout.
(From meta-quanta rev: f10e2e0bd89eb10638afd92bde04dc4fca216f9c)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I13826bdf82c0a05d8a6b22de098bc9dabf724bed
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Modify action of LOCATE LED from 'On' to 'Blink'
for LED group manager
(From meta-quanta rev: db4d64ca8ce82e334b2dcfae871511de4ed1273d)
Signed-off-by: tony lee <tony.lee@quantatw.com>
Change-Id: I5a0fdacd608ad2d8f9bbbb7cb34ffd56257a67a2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add the led configuration for meta-gsj
- Enabled the LED group manager
(From meta-quanta rev: 8fafb59db0a032b581c8465392577403717ac011)
Change-Id: I027ee78275a3a274462918c7c630cd6a02ab25ee
Signed-off-by: tony lee <tony.lee@quantatw.com>
Signed-off-by: Tien-hung Huang <buddy.huang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add quanta-nvme-powerctrl which included three features:
1. When BMC bootup, initial nvme ssd powoer output.
2. monitor ssd present update ssd power output.
3. Add bucstl commands to set Present property to d-bus
nvme manager and set fault led if needed.
(From meta-quanta rev: abda561c2bc846d42808c4c752a42c936e871b2f)
Change-Id: Ib52b7505e4c6292bb08e1e2ef43c6a9459ef46b5
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: tony lee <tony.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
A number of corequisites exist so squashing these all into one patch.
meta-ingrasys - refresh master bc513127f4..67bcaf389f
meta-hxt - refresh master 86a4df514f..8fe0d38bbb
meta-phosphor - refresh master 06c09d7cce..df6ddae3d2
meta-quanta - refresh master 4f126361a1..53f3025271
Change-Id: I3daeef2a0467d8ea4f1fd1c617e526f8b11258af
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
oe-core branched in preparation for the upcoming 2.7 Yocto release and
as of 13e45ff requires core layer compatibility to "warrior" instead of
"thud". We'll retain compatibility for both until we do our own branch
or stop testing thud.
(From meta-quanta rev: 4f126361a17e37cfc96d5f9ccd5e3b81fa8b5ae2)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I0a6cc767e787cef3d31d75b987b9369e44a7afc9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Define configuration files of sensors and fans for hwmon
in project gsj and test pass.
(From meta-quanta rev: b1247010c2e67d3050dc81cd46d3c2218fc1870d)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I3db8d8d3b70cd949eb3f0a8774615f9fa8b59df0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-quanta rev: e9052dd85acd787fe13f8176f8d45b98d05d6d72)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I451d88113074bdd17b734e55d9f3cf3b8ca1d983
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set the machine suffix "gsj" on the linux-nuvoton recipe such that it
will only apply to this machine.
(From meta-quanta rev: 84f2057e7e1067c3cc485d872f4581db0ffb1441)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I3d8631b25b4a542f529f7e55c28e90159dfcddb7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The modified whitelist by the admin will replace the default whitelist.
Tested: Build Quanta GSJ board image and load on the EVB.
Ensure that BMC boots to console, and the whitelist is working.
(From meta-quanta rev: bccdfbe91fb21e7c16c3204a88133f43f01a002c)
Change-Id: I8a3713a30b982ed59b1d45c90123155288bc7994
Signed-off-by: PKLee-Quanta <p.k.lee@quantatw.com>
Signed-off-by: Tien-hung Huang <buddy.huang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop the ipmi channel config. It is unused by phosphor-host-ipmid.
Now, a platform can override phosphor-ipmi-config with a channel
configuration file to enable this.
(From meta-quanta rev: ea17a157dbf31a8869e3d406306888f1f09e9ec4)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I8036c1939dcf936b3a0ea5948830c4104ee04dd7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|