Age | Commit message (Collapse) | Author | Files | Lines |
|
Google-Bug-Id: 186163211
Change-Id: I0e7a43b93cb441ee382b5b94e6f5aac24aaddc7d
Signed-off-by: Willy Tu <wltu@google.com>
|
|
The repository supports it, so switch it over in bitbake.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I8d96c79b395ee2614ddd869091569f245426c5c7
|
|
- change back to x86-power-control upstream
- enable chassis-system reset for hard power cycle
by Redfish
Usage by Redfish:
curl -k -u ${username}:${password}
https://${bmcip}/redfish/v1/Chassis/chassis/Actions/Chassis.Reset
-d '{"ResetType": "PowerCycle"}'
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icff87d590c911289cb15bdc34dafce69e55c9e2a
|
|
The backup WCTemp was being set to 72000 * 1000, clean up the logic.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ic752b188cb06f9755fcfa6f21f530dcb979ac813
|
|
Add 3 x 1 second retries for WCTemp and default to a sane WCTemp if 0 is
read.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ia87e704d2e5e0990a0727cd37290084f8eda2df6
|
|
Adds the compatible layers for this machine configuration.
Tested: With a companion uboot configuration change patch was able to
build image.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia517c46647249279a3cadd75e04eb1d8ff5df209
|
|
- add fans e-fuse PG GPIO config file
- add fans e-fuse PG GPIO as the sensor
- monitor fans e-fuse PG GPIO and when it assert low,
record the SEL log
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I32298097b1e79036b67edea65b84ef4d78cbacfc
|
|
Fix the uboot config to always apply because the palmetto machine
override is no longer set.
Tested: With companion layers patch was able to build.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ifc16e06a0906d5530a8ccfbe2a15dcc8d9fa9296
|
|
Add the @nvmeList@ template and dynamically detect for which
drives we should have and populated the JSON accordingly
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id0f6cefe80ae72dc8d3601d0a03dd1039341175c
|
|
Latest upstream yocto has moved on to the 3.3 hardknott release
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ieae36798d66d21c2c642931f06407d3bb2acf163
|
|
Since it needs to read WCTEMP from the nvme SSD to overwirte
read-margin-temp json config, add the dependency to make
sure the pid control service start after the nvme service
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id11ee5eb9e4cb994c700849d58996d7c25c4618e
|
|
- Add the ability to dynamically set the failSafe percent
https://gerrit.openbmc-project.xyz/38112
Note:
It's already submitted to Gerrit and under review
Also, it will be removed until it's merged
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I0df3c413f46df880aa585af2c8cbc0fa8a5140a6
|
|
update the fan hwmon variables to be wrapped in @@ to
avoid any mis-replacement
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I6ecfb868fe1b58b2918bdb2760462250f0c4ae3a
|
|
1. add acpi-power-state daemon to check the ACPI power
states from BIOS
2. set failsafe fan speed at different states
- S0_G0_D0: 90%
- S5_G2: 40%
Note:
this item depends on the commit and will
add as the patches first in another PR
https://gerrit.openbmc-project.xyz/38112
3. add gbs-check-host-state.sh to monitor the power state
D-Bus and then trigger to set fan failsafe speed
4. remove gbs-detect-fan-fail service and unused scripts
from phosphor-pid-control
5. update read-margin-temp srcrev to avoid nvme temperature
sensor failed due to nvme SSD not-present
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I496dd7bc59076a2b3690e367877d49533855c9fe
|
|
Josh Lehan (2):
Update README
Modified return value from min to NaN when NVMe present is false
Signed-off-by: Harvey Wu <Harvey.Wu@quantatw.com>
Change-Id: Iecb067d10507c0a60ad585b47ee5d0184705325d
|
|
Change to work-round for the kernel dts, so revert back
the following commit:
https://gerrit.openbmc-project.xyz/c/openbmc/meta-quanta/+/38877
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I21af8da577f2554b55886fc0133f94be77bc3520
|
|
mapper wait call should not be called every loop
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I7763f8dfbd78fdacbdbf21076cbc56cde8b7bc17
|
|
The D-bus type for the sensor value change to use double
and the read-margin-temp already update for that, so replace
millidegree by degree for the unit
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ib2725e7834ea2bd0021807ee5395f45c07b08c49
|
|
Read WCTEMP reading and overwrite to config-margin.json
and update the WCTEMP variables to be wrapped in @@ to
avoid any mis-replacement
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I2f6eae64acc1db089c1a3ca48288ae360d555dac
|
|
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: If3358964f776d0f9ae55f4eee5ea05d6d95b050a
|
|
Josh Lehan (2):
Massively refactored to fix bugs and use double
Add single point of failure mode and error detect
quadpixels (1):
Reuse DBus connections and reduce redundant DBus messages
Harvey Wu (8):
use struct to save zones objects
comment some print log in util.cpp
comment some print log in dbus.hpp
fix function input parameter
fit the coding standard
Add option and function according issue #11
Add "debug", "ignore" option
Add NVMe Present Option
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I8cfa8d127c4ff2f9d8ba02bea73bcca6d2c62f9e
|
|
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ia161322f75a9c967dab489cdb93776e8abbc828a
|
|
Recipe name as updated to gbs-inventory-cleanup. DEPENDS also need to be
updated to ensure compilation.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Icc43de8501e3eea2da437074ece62d3a02746b88
|
|
Set the Max/Min value to i2cool sensors to avoid the
abnormal current/thershold values in the SEL logs
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ie46e07a9a41f65b820258675f0e213e5434583cc
|
|
This layer provides libseccomp.
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
|
|
Sometimes LED manager service will get sdbus "the name
is not activatable" error for the first start, so add
retry 10 times to make sure the service start successfully
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ic9e429bca70cae3272547de6f8c8f96df0d02a9c
|
|
Use a unique name for this recipe so it won't conflict
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ie2d5d71a73288ad7b6d1d35812cb8bfc7a11e5ae
|
|
Specify the Restart as on-failure to fix the config error
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I39e9e4d79e36f1222a3e54c12702b9b8b0ee56fa
|
|
It's already added in meta-google layer, so remove the
nftables kernel configs from here
https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/41161
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ib9a0201987da19e94a225b3487f506af388c536f
|
|
1. add gbmc distro override
2. add GBMC_NCSI_IF_NAME to enable gbmc-ncsi-config
3. enable kernel netfilter configurations to be compatible
with gbmc network config rules
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I5b36f79d4a6dcb31753deb860d2e0c7f3349efbd
|
|
1. Change CPU margin from 13C to 15C
2. NVMe SSD margin = WCTemp - 7
(WCTemp = Warning Composite Temperature Threshold)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Id9af01305764132fa537afada073826f3d37125e
|
|
These are needed to monitor the NVMe drives.
Change-Id: I298871dac5195fed4d30fe9722370d98c68da942
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Willy Tu <wltu@google.com>
|
|
Add the fleeting2 sensor for the hda temperature
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I5dd3ebfcedc07df15677bacdf0f029e009213adf
|
|
Change to set CRITILO fan speed to 1800 RPM for fan failsafe
consideration according to the thermal team suggestion
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I2fef191d53b095bce6518583dea072700ff9a0e7
|
|
Set CRITILO fan speed to 600 RPM for host tool fan pwm calculation
(From meta-quanta rev: 3bee1ba439c56ccb37ee1465a7d4209f757db015)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ica5a0e030f32425f74c30ad5c2dd80b875227b87
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Do i2cool temperature calibration by phosphor-virtual-sensor
Also, as the phosphor-virtual-sensor generate the same D-Bus path,
chage the sensor name in hwmon to avoid the duplicate D-Bus path
(From meta-quanta rev: e1562d81de2b88bfee04cd2440133caa334b726f)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I31f000c8ab3cdcef100e95a2fd4de5ecb19ad14a
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Enable enhanced mode to improve the memory training
(From meta-quanta rev: caf2eedb93f5b0f7e0764d1bfdfdb0a758ea1477)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I46f745d8450aa330b76f815cbf7bccbb15b84674
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Since the fan hwmon sysfs path may change, if the hwmon path of config
json is already replaced by fan-table-init.sh, it would never change
in rw partition. Add config-sku.json to make sure the correct fan hwmon
sysfs path is replaced
(From meta-quanta rev: fb6723490cc9cbc8fd806cdd6d795e7feca4173b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ic4ae24f3311a1ced845b60bddf247cef6b3c1e1e
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Work-round to correct the SlimSAS cable sensor names/GPIO associations
for the silkscreen
(From meta-quanta rev: 60e4870a9a3949b941d5e054cafca0aae1891671)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I36aa91674bfe5bb565142675ebe2209fd5fdd1b8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Adjust the IOUT/POUT GAIN for ADM1272 since main source
changed for DVT/PVT HW
(From meta-quanta rev: 1c42eb58913bf5d2af803a774e623ebcc64ec252)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iae21f6ff4b840019b1b3e6dbf470212d71ff2514
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379
for details about why this is necessary.
(From meta-quanta rev: eee12a63ac4fc9a86dab5ed191fde913f39911c3)
Signed-off-by: Ed Tanous <ed@tanous.net>
Change-Id: I47dd053673f32749075703ad2a098516430e7144
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This reverts commit a310726a27974a471386d4e5f6d4b79f3bc6906e.
Reason for revert:
- Remove Feature:
1. The feature that only enable mTLS authentication will be moved
to bmcweb, which can be controlled by the meson options of bmcweb
2. phosphor-monitor-hostname will move into bmcweb
- The remaining features are moved to meta-google
1. default-users
2. default-ca
(From meta-quanta rev: 535e6926336f229686e71f7617bd4e0ac28b61dc)
Signed-off-by: Alan Kuo <Alan_Kuo@quantatw.com>
Change-Id: I5213668928db866b54206732cab8747510e63607
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Stop phosphor-hwmon before performing a tray power cycle to
avoid ADM1272 doing an abnormal I2C transaction and causing
ADM1272 driver probe to fail due to wrong Manufacturer ID.
(From meta-quanta rev: 2143eac88d3643e4a8d461eec2ed9a2d2e6a32f3)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ibd69cb956d76dbe08f0bb6e6bce115d5bab469df
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Since their pwm/tach are inverted physically, so work-round to
exchange the pwm/tach for fb_fan1 and fb_fan2
(From meta-quanta rev: b673c1f821cf041b4cb178ea09cd0fdb5095d421)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If148239ed199000b20d1782579f344a3e3bd72ee
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. adjust VR/Hotswap sensors threshold:
hotswap_iout current
vddcr_cpu_out voltage
vddcr_cpu_in current
vddcr_soc_out voltage
vddio_abcd/efgh_out voltage
2. adjust M value in sensors.yaml:
hotswap_iout current
vddcr_cpu_in current
(From meta-quanta rev: 2297095f43ad8bdff5bdfc2031acfa878ae4250b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I46310ec035c8294ee7147bc2d6f4b8e3b14e2828
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. Fan LCT = 3330 RPM
2. Minimum fan duty = 15%
3. NVMe Kp=1250,Ki=12
(From meta-quanta rev: b6ba0ea2d0007b1db640ea9d15d171ab7d79938e)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I541dce79aab0b6dc48964cfb0657c19f13f9520f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The next release of Yocto is soon and most of the upstream
layers have switched support strings for it. Support layer
compat for gatesgarth (current) and dunfell (previous).
(From meta-quanta rev: 34f30a0dca7ab63d93d56132f93e96244b02aeff)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I388aa5bf43235718668da109ebdb800e27b856d0
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Add mapper wait for the GPIO present dbus to make sure we get
the SATA/PE GPIO Present status successfully
(From meta-quanta rev: ac35d89c6a02f67ae2b7a40aa014570f279f5426)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I67cfd417b6d4e7ee04dd0ef2b01a82fca63b5b92
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Support for the Scale property on the sensor Value interface was dropped
in the phosphor-hwmon commit ecac0ae208cfc437 ("Fixes for when sensor value
is a double").
(From meta-quanta rev: 8158024f02f58e04bae6677a5703d4e69d990877)
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Change-Id: Ic21f54a1f21529d4e36d5111fb4562f2581b4c82
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dbus sensor interface 'xyz.openbmc_project.Sensor.Value' migrated
from int to double. Therefore all old 'int64_t' types in
"*-ipmi-sensor*.yaml" files for this interface should be changed to
'double'.
(From meta-quanta rev: e48a99450e7c33ddca74cf9aeab4258e38ed1cab)
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Change-Id: I42da4df4e06d22fdd68dae4ab1ab9213908feac8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|