From 4d93f92dd734a1d8edfdae0e555739199c53ef63 Mon Sep 17 00:00:00 2001 From: Adriana Kobylak Date: Wed, 11 Aug 2021 15:46:10 +0000 Subject: meta-ibm: Update local.conf.sample Update with the latest version from upstream. Change-Id: I1a7da37b0457dab873afaf6445aca360d54b47ca Signed-off-by: Adriana Kobylak --- meta-ibm/meta-romulus/conf/local.conf.sample | 90 ++++++++++++++++++++-------- 1 file changed, 65 insertions(+), 25 deletions(-) (limited to 'meta-ibm/meta-romulus') diff --git a/meta-ibm/meta-romulus/conf/local.conf.sample b/meta-ibm/meta-romulus/conf/local.conf.sample index c5e363b95..e600acace 100644 --- a/meta-ibm/meta-romulus/conf/local.conf.sample +++ b/meta-ibm/meta-romulus/conf/local.conf.sample @@ -2,7 +2,9 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling @@ -85,12 +87,12 @@ DISTRO ?= "openbmc-openpower" PACKAGE_CLASSES ?= "package_rpm" # -# SDK/ADT target architecture +# SDK target architecture # -# This variable specifies the architecture to build SDK/ADT items for and means +# This variable specifies the architecture to build SDK items for and means # you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). -# Supported values are i686 and x86_64 +# Supported values are i686, x86_64, aarch64 #SDKMACHINE ?= "i686" SANITY_TESTED_DISTROS:append ?= " *" @@ -103,6 +105,8 @@ SANITY_TESTED_DISTROS:append ?= " *" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -110,14 +114,14 @@ SANITY_TESTED_DISTROS:append ?= " *" # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) # "tools-debug" - add debugging tools (gdb, strace) # "eclipse-debug" - add Eclipse remote debugging support -# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) # "debug-tweaks" - make an image suitable for development # e.g. ssh root access has a blank password # There are other application targets that can be used here too, see # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. # We default to enabling the debugging tweaks. -EXTRA_IMAGE_FEATURES = "debug-tweaks" +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # # Additional image features @@ -126,20 +130,18 @@ EXTRA_IMAGE_FEATURES = "debug-tweaks" # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics -# - 'image-prelink' in order to prelink the filesystem image -# - 'image-swab' to perform host system intrusion detection -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-prelink" +USER_CLASSES ?= "buildstats" # # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -164,12 +166,12 @@ PATCHRESOLVE = "noop" # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# shutdown the build. If there is less than 100MB or 1K inodes, perform a hard abort # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. # It's necessary to monitor /tmp, if there is no space left the build will fail # with very exotic errors. -BB_DISKMON_DIRS = "\ +BB_DISKMON_DIRS ??= "\ STOPTASKS,${TMPDIR},1G,100K \ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ @@ -182,7 +184,7 @@ BB_DISKMON_DIRS = "\ # # Shared-state files from other locations # -# As mentioned above, shared state files are prebuilt cache data objects which can +# As mentioned above, shared state files are prebuilt cache data objects which can be # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # @@ -197,19 +199,57 @@ BB_DISKMON_DIRS = "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # -# By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. This assumes there is a -# libsdl library available on your build system. -#PACKAGECONFIG:append:pn-qemu-native = " sdl" -#PACKAGECONFIG:append:pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +# By default native qemu will build with a builtin VNC server where graphical output can be +# seen. The line below enables the SDL UI frontend too. +#PACKAGECONFIG:append:pn-qemu-system-native = " sdl" +# By default libsdl2-native will be built, if you want to use your host's libSDL instead of +# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +#ASSUME_PROVIDED += "libsdl2-native" +# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds +# a handy set of menus for controlling the emulator. +#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+" + +# +# Hash Equivalence +# +# Enable support for automatically running a local hash equivalence server and +# instruct bitbake to use a hash equivalence aware signature generator. Hash +# equivalence improves reuse of sstate by detecting when a given sstate +# artifact can be reused as equivalent, even if the current task hash doesn't +# match the one that generated the artifact. +# +# A shared hash equivalent server can be set with ":" format +# +#BB_HASHSERVE = "auto" +#BB_SIGNATURE_HANDLER = "OEEquivHash" + +# +# Memory Resident Bitbake +# +# Bitbake's server component can stay in memory after the UI for the current command +# has completed. This means subsequent commands can run faster since there is no need +# for bitbake to reload cache files and so on. Number is in seconds, after which the +# server will shut down. +# +#BB_SERVER_TIMEOUT = "60" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. -CONF_VERSION = "1" +CONF_VERSION = "2" -- cgit v1.2.3