From be4501335c8fb44d2dedf57d7e1d3dcc73d92925 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 2 Sep 2021 17:15:09 +0930 Subject: linux-openbmc: Move to Linux v5.14 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This moves the OpeNBMC kernel to a v5.14 base. There are 78 patches in the tree, plus a the MCTP core and device tree changes that were merged in v5.15 which have been backported. Andrew Jeffery (11): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding ARM: dts: aspeed: p10bmc: Enable KCS channel 2 ARM: dts: tacoma: Clean up KCS nodes B. J. Wyman (2): ARM: dts: aspeed: Rainier remove PSU gpio-keys hwmon: (pmbus/ibm-cffps) Fix write bits for LED control Brad Bishop (3): ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string eeprom: at25: Split reads into chunks and cap write size Cédric Le Goater (19): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training /dev/mem: add a devmem kernel parameter to activate the device Eddie James (11): dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl dt-bindings: input: Add documentation for IBM Operation Panel input: misc: Add IBM Operation Panel driver ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO spi: fsi: Reduce max transfer size to 8 bytes dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible fsi: occ: Force sequence numbering per OCC hwmon: (occ) Remove sequence numbering and checksum calculation Fran Hsu (2): ARM: dts: nuvoton: npcm730: Add UDC device ARM: dts: nuvoton: gsj: Add non-mainline nodes George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Isaac Kurth (1): ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6 Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (4): net: ftgmac100: Ensure tx descriptor updates are visible ARM: dts: ast2600evb: Enable EHCI controller ARM: dts: aspeed: rainier: Enable earlycon ARM: configs: aspeed: Add openbmc kernel options Tomer Maimon (21): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: dts: npcm7xx: Add out of tree nodes ARM: dts: olympus: Add non-mainline nodes ARM: dts: npcm750: Add fuse regmap support node ARM: dts: npcm7xx: Link fuse syscon to adc and wdt clk: npcm7xx: add read only flag to divider clocks iio: adc: Add calibration support to npcm ADC watchdog: npcm: Add DT restart priority and reset type support pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver pinctrl: pinconf: add pin persist configuration pinctrl: npcm7xx: Add pin persist configuration support spi: npcm-pspi: Add full duplex support dt-binding: bmc: add NPCM7XX JTAG master documentation misc: Add NPCM7xx JTAG master driver watchdog: npcm: Modify get reset status function ARM: configs: add defconfig for Nuvoton NPCM7xx BMC William A. Kennington III (1): net: npcm: Support for fixed PHYs Change-Id: I315000ab63c3f6a34d99cf25e366fa0781c85d46 Signed-off-by: Joel Stanley --- meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'meta-nuvoton') diff --git a/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb b/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb index efaabff37..a9c8a32b9 100644 --- a/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb +++ b/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb @@ -1,6 +1,6 @@ -KBRANCH ?= "dev-5.10" -LINUX_VERSION ?= "5.10.30" +KBRANCH ?= "dev-5.14" +LINUX_VERSION ?= "5.14" -SRCREV="4c64c5ceebe8210bb838e74500077a0e944ca825" +SRCREV="e2413239f9a751a2a7491569d27dce76773f2777" require linux-nuvoton.inc -- cgit v1.2.3