From 1110521700bbfe9ffd32338fed19492114e8bbd4 Mon Sep 17 00:00:00 2001 From: Andrew Geissler Date: Fri, 12 Feb 2021 15:30:38 -0600 Subject: meta-raspberrypi: subtree update:a7cc636d4e..f5fe02c30c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Aaron Shaw (5): overlays: reorder in alphabetical order overlays: add justboom overlays overlays: add overlay to allow 64 bit usage with CM3 overlays: add overlays for pi 400 and cm4 overlays: add missing device overlays Aurelian Zanoschi (2): rpi-config: Add support for CM4 host USB [documentation]Add USB host support in documentation Bartłomiej Burdukiewicz (1): rpi-cmdline: remove unnecessary spaces from cmdline.txt Christopher Clark (1): machine: use weak default for kernel and KERNEL_DEVICETREE settings Jonas Vautherin (1): linux-raspberrypi: Superfluous 'inherit kernel' Martin Jansa (6): rpi-config: fix do_deploy rpi-config: use CONFIG shell variable linux-raspberrypi: add recipe for 5.10 version linux-raspberrypi: update LIC_FILES_CHKSUM in .inc file and drop from 5.10 and dev recipe rpi-default-versions: Switch default kernel to 5.10 raspberrypi-firmware.inc: upgrade to latest for 5.10.13 kernel Matt Spencer (1): linux-raspberrypi: Enable use of 'RPI_EXTRA_CONFIG += ...' in local.conf Ovidiu Panait (1): linux-raspberrypi: pass dtc flags via KERNEL_DTC_FLAGS Paul Barker (5): conf: Use unified u-boot config for 64-bit targets raspberrypi4-64: No need to force arm_64bit=1 linux-raspberrypi: Uprev to v5.4.83 linux-raspberrypi: Uprev yocto-kernel-cache kas-poky-rpi.yml: Make git ignore layers cloned by kas SCVready (1): rpi-config: Relocated "start_x=1" in config.txt Signed-off-by: Andrew Geissler Change-Id: Ie1a8cd049694b5f3158b63cedc30c9df24f82120 --- meta-raspberrypi/.gitignore | 1 + meta-raspberrypi/conf/machine/include/rpi-base.inc | 24 ++-- .../conf/machine/include/rpi-default-providers.inc | 2 +- .../conf/machine/include/rpi-default-versions.inc | 2 +- meta-raspberrypi/conf/machine/raspberrypi3-64.conf | 3 +- meta-raspberrypi/conf/machine/raspberrypi4-64.conf | 6 +- meta-raspberrypi/docs/extra-build-config.md | 9 ++ meta-raspberrypi/kas-poky-rpi.yml | 3 + .../recipes-bsp/bootfiles/rpi-cmdline.bb | 2 +- .../recipes-bsp/bootfiles/rpi-config_git.bb | 158 +++++++++++---------- .../recipes-bsp/common/raspberrypi-firmware.inc | 6 +- .../recipes-kernel/linux/linux-raspberrypi-dev.bb | 4 +- .../recipes-kernel/linux/linux-raspberrypi.inc | 4 +- .../recipes-kernel/linux/linux-raspberrypi_5.10.bb | 18 +++ .../recipes-kernel/linux/linux-raspberrypi_5.4.bb | 8 +- 15 files changed, 149 insertions(+), 101 deletions(-) create mode 100644 meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.10.bb (limited to 'meta-raspberrypi') diff --git a/meta-raspberrypi/.gitignore b/meta-raspberrypi/.gitignore index 706144a55..073cf0615 100644 --- a/meta-raspberrypi/.gitignore +++ b/meta-raspberrypi/.gitignore @@ -5,3 +5,4 @@ build* *.rej *.log docs/_build +/layers diff --git a/meta-raspberrypi/conf/machine/include/rpi-base.inc b/meta-raspberrypi/conf/machine/include/rpi-base.inc index 18368c621..ac945f6a2 100644 --- a/meta-raspberrypi/conf/machine/include/rpi-base.inc +++ b/meta-raspberrypi/conf/machine/include/rpi-base.inc @@ -18,46 +18,54 @@ RPI_KERNEL_DEVICETREE_OVERLAYS ?= " \ overlays/at86rf233.dtbo \ overlays/disable-bt.dtbo \ overlays/dwc2.dtbo \ + overlays/gpio-ir.dtbo \ + overlays/gpio-ir-tx.dtbo \ overlays/gpio-key.dtbo \ overlays/hifiberry-amp.dtbo \ overlays/hifiberry-dac.dtbo \ overlays/hifiberry-dacplus.dtbo \ overlays/hifiberry-digi.dtbo \ + overlays/justboom-both.dtbo \ + overlays/justboom-dac.dtbo \ + overlays/justboom-digi.dtbo \ overlays/i2c-rtc.dtbo \ + overlays/imx219.dtbo \ overlays/iqaudio-dac.dtbo \ overlays/iqaudio-dacplus.dtbo \ - overlays/miniuart-bt.dtbo \ overlays/mcp2515-can0.dtbo \ overlays/mcp2515-can1.dtbo \ + overlays/miniuart-bt.dtbo \ overlays/pitft22.dtbo \ - overlays/pitft28-resistive.dtbo \ overlays/pitft28-capacitive.dtbo \ + overlays/pitft28-resistive.dtbo \ overlays/pitft35-resistive.dtbo \ overlays/pps-gpio.dtbo \ overlays/rpi-ft5406.dtbo \ overlays/rpi-poe.dtbo \ - overlays/vc4-kms-v3d.dtbo \ overlays/vc4-fkms-v3d.dtbo \ - overlays/w1-gpio-pullup.dtbo \ + overlays/vc4-kms-v3d.dtbo \ overlays/w1-gpio.dtbo \ - overlays/gpio-ir.dtbo \ - overlays/gpio-ir-tx.dtbo \ - overlays/imx219.dtbo \ + overlays/w1-gpio-pullup.dtbo \ " RPI_KERNEL_DEVICETREE ?= " \ + bcm2708-rpi-zero.dtb \ bcm2708-rpi-zero-w.dtb \ bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-rev1.dtb \ bcm2708-rpi-b-plus.dtb \ bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-2-b.dtb \ bcm2710-rpi-3-b.dtb \ bcm2710-rpi-3-b-plus.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-400.dtb \ bcm2708-rpi-cm.dtb \ bcm2710-rpi-cm3.dtb \ + bcm2711-rpi-cm4.dtb \ " -KERNEL_DEVICETREE ?= " \ +KERNEL_DEVICETREE ??= " \ ${RPI_KERNEL_DEVICETREE} \ ${RPI_KERNEL_DEVICETREE_OVERLAYS} \ " diff --git a/meta-raspberrypi/conf/machine/include/rpi-default-providers.inc b/meta-raspberrypi/conf/machine/include/rpi-default-providers.inc index 181b9364b..c02d24879 100644 --- a/meta-raspberrypi/conf/machine/include/rpi-default-providers.inc +++ b/meta-raspberrypi/conf/machine/include/rpi-default-providers.inc @@ -1,6 +1,6 @@ # RaspberryPi BSP default providers -PREFERRED_PROVIDER_virtual/kernel ?= "linux-raspberrypi" +PREFERRED_PROVIDER_virtual/kernel ??= "linux-raspberrypi" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" PREFERRED_PROVIDER_virtual/egl ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "userland", d)}" PREFERRED_PROVIDER_virtual/libgles2 ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "userland", d)}" diff --git a/meta-raspberrypi/conf/machine/include/rpi-default-versions.inc b/meta-raspberrypi/conf/machine/include/rpi-default-versions.inc index e57c702b3..17d5bd6d5 100644 --- a/meta-raspberrypi/conf/machine/include/rpi-default-versions.inc +++ b/meta-raspberrypi/conf/machine/include/rpi-default-versions.inc @@ -1,3 +1,3 @@ # RaspberryPi BSP default versions -PREFERRED_VERSION_linux-raspberrypi ??= "5.4.%" +PREFERRED_VERSION_linux-raspberrypi ??= "5.10.%" diff --git a/meta-raspberrypi/conf/machine/raspberrypi3-64.conf b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf index 65e3302c3..539413219 100644 --- a/meta-raspberrypi/conf/machine/raspberrypi3-64.conf +++ b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf @@ -18,11 +18,12 @@ RPI_KERNEL_DEVICETREE = " \ broadcom/bcm2710-rpi-3-b.dtb \ broadcom/bcm2710-rpi-3-b-plus.dtb \ broadcom/bcm2837-rpi-3-b.dtb \ + broadcom/bcm2710-rpi-cm3.dtb \ " SERIAL_CONSOLES ?= "115200;ttyS0" -UBOOT_MACHINE = "rpi_3_config" +UBOOT_MACHINE = "rpi_arm64_config" # When u-boot is enabled we need to use the "Image" format and the "booti" # command to load the kernel diff --git a/meta-raspberrypi/conf/machine/raspberrypi4-64.conf b/meta-raspberrypi/conf/machine/raspberrypi4-64.conf index 633d18801..12c8954d9 100644 --- a/meta-raspberrypi/conf/machine/raspberrypi4-64.conf +++ b/meta-raspberrypi/conf/machine/raspberrypi4-64.conf @@ -15,12 +15,14 @@ include conf/machine/include/rpi-base.inc RPI_KERNEL_DEVICETREE = " \ broadcom/bcm2711-rpi-4-b.dtb \ + broadcom/bcm2711-rpi-400.dtb \ + broadcom/bcm2711-rpi-cm4.dtb \ " SDIMG_KERNELIMAGE ?= "kernel8.img" SERIAL_CONSOLES ?= "115200;ttyS0" -UBOOT_MACHINE = "rpi_4_config" +UBOOT_MACHINE = "rpi_arm64_config" VC4DTBO ?= "vc4-fkms-v3d" @@ -31,6 +33,4 @@ KERNEL_IMAGETYPE_UBOOT ?= "Image" KERNEL_IMAGETYPE_DIRECT ?= "Image" KERNEL_BOOTCMD ?= "booti" -RPI_EXTRA_CONFIG ?= "\n# Force arm in 64bit mode. See: https://github.com/raspberrypi/firmware/issues/1193.\narm_64bit=1" - ARMSTUB ?= "armstub8-gic.bin" diff --git a/meta-raspberrypi/docs/extra-build-config.md b/meta-raspberrypi/docs/extra-build-config.md index 921dcc599..1caf904fd 100644 --- a/meta-raspberrypi/docs/extra-build-config.md +++ b/meta-raspberrypi/docs/extra-build-config.md @@ -269,6 +269,15 @@ local.conf: ENABLE_DWC2_PERIPHERAL = "1" +## Enable USB host support + +By default in case of the Compute Module 4 IO Board the standard USB driver +that usually supports host mode operations is disabled for power saving reasons. +Users who want to use the 2 USB built-in ports or the other ports provided via +the header extension should set the following in local.conf: + + ENABLE_DWC2_HOST = "1" + ## Enable Openlabs 802.15.4 radio module When using device tree kernels, set this variable to enable the 802.15.4 hat: diff --git a/meta-raspberrypi/kas-poky-rpi.yml b/meta-raspberrypi/kas-poky-rpi.yml index 2d80a57ed..d629e817f 100644 --- a/meta-raspberrypi/kas-poky-rpi.yml +++ b/meta-raspberrypi/kas-poky-rpi.yml @@ -11,6 +11,7 @@ repos: poky: url: https://git.yoctoproject.org/git/poky + path: layers/poky refspec: master layers: meta: @@ -19,6 +20,7 @@ repos: meta-openembedded: url: http://git.openembedded.org/meta-openembedded + path: layers/meta-openembedded refspec: master layers: meta-oe: @@ -28,6 +30,7 @@ repos: meta-qt5: url: https://github.com/meta-qt5/meta-qt5/ + path: layers/meta-qt5 refspec: master bblayers_conf_header: diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb index 97db4e36f..40a9949a1 100644 --- a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb +++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-cmdline.bb @@ -37,7 +37,7 @@ CMDLINE = " \ " do_compile() { - echo "${CMDLINE}" > "${WORKDIR}/cmdline.txt" + echo "${@' '.join('${CMDLINE}'.split())}" > "${WORKDIR}/cmdline.txt" } do_deploy() { diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb index e1c330db1..de43c4b36 100644 --- a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb +++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb @@ -34,210 +34,220 @@ inherit deploy nopackages do_deploy() { install -d ${DEPLOYDIR}/${BOOTFILES_DIR_NAME} + CONFIG=${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - cp ${S}/config.txt ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/ + cp ${S}/config.txt $CONFIG if [ -n "${KEY_DECODE_MPG2}" ]; then - sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' $CONFIG fi if [ -n "${KEY_DECODE_WVC1}" ]; then - sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' $CONFIG fi if [ -n "${DISABLE_OVERSCAN}" ]; then - sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' $CONFIG fi if [ "${DISABLE_SPLASH}" = "1" ]; then - sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' $CONFIG fi # Set overclocking options if [ -n "${ARM_FREQ}" ]; then - sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' $CONFIG fi if [ -n "${GPU_FREQ}" ]; then - sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' $CONFIG fi if [ -n "${CORE_FREQ}" ]; then - sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' $CONFIG fi if [ -n "${SDRAM_FREQ}" ]; then - sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' $CONFIG fi if [ -n "${OVER_VOLTAGE}" ]; then - sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' $CONFIG fi # GPU memory if [ -n "${GPU_MEM}" ]; then - sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' $CONFIG fi if [ -n "${GPU_MEM_256}" ]; then - sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' $CONFIG fi if [ -n "${GPU_MEM_512}" ]; then - sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' $CONFIG fi if [ -n "${GPU_MEM_1024}" ]; then - sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' $CONFIG fi # Set boot delay if [ -n "${BOOT_DELAY}" ]; then - sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' $CONFIG fi if [ -n "${BOOT_DELAY_MS}" ]; then - sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' $CONFIG fi # Set HDMI and composite video options if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then - sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' $CONFIG fi if [ -n "${HDMI_DRIVE}" ]; then - sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' $CONFIG fi if [ -n "${HDMI_GROUP}" ]; then - sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' $CONFIG fi if [ -n "${HDMI_MODE}" ]; then - sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' $CONFIG fi if [ -n "${CONFIG_HDMI_BOOST}" ]; then - sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' $CONFIG fi if [ -n "${SDTV_MODE}" ]; then - sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' $CONFIG fi if [ -n "${SDTV_ASPECT}" ]; then - sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' $CONFIG fi if [ -n "${DISPLAY_ROTATE}" ]; then - sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' $CONFIG fi # Video camera support if [ "${VIDEO_CAMERA}" = "1" ]; then - echo "# Enable video camera" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "start_x=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + # TODO: It has been observed that Raspberry Pi 4B 4GB may fail to enable the camera if "start_x=1" is at the end + # of the file. The underlying cause is unknown, but it can be related with a file size limitation affecting + # this variable. Therefore, "start_x=1" has been set to replace the original occurrence in config.txt, + # which is at the middle of the file. + sed -i '/#start_x=/ c\start_x=1' $CONFIG fi # Offline compositing support if [ "${DISPMANX_OFFLINE}" = "1" ]; then - echo "# Enable offline compositing" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dispmanx_offline=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable offline compositing" >>$CONFIG + echo "dispmanx_offline=1" >>$CONFIG fi # SPI bus support if [ "${ENABLE_SPI_BUS}" = "1" ] || [ "${PITFT}" = "1" ]; then - echo "# Enable SPI bus" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtparam=spi=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable SPI bus" >>$CONFIG + echo "dtparam=spi=on" >>$CONFIG fi # I2C support if [ "${ENABLE_I2C}" = "1" ] || [ "${PITFT}" = "1" ]; then - echo "# Enable I2C" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtparam=i2c1=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable I2C" >>$CONFIG + echo "dtparam=i2c1=on" >>$CONFIG + echo "dtparam=i2c_arm=on" >>$CONFIG fi # PiTFT22 display support if [ "${PITFT22}" = "1" ]; then - echo "# Enable PITFT22 display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable PITFT22 display" >>$CONFIG + echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>$CONFIG fi if [ "${PITFT28r}" = "1" ]; then - echo "# Enable PITFT28r display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable PITFT28r display" >>$CONFIG + echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>$CONFIG fi if [ "${PITFT28c}" = "1" ]; then - echo "# Enable PITFT28c display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=pitft28-capacitive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=pitft28-capacitive,touch-swapxy,touch-invx" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable PITFT28c display" >>$CONFIG + echo "dtoverlay=pitft28-capacitive,rotate=90,speed=32000000,txbuflen=32768" >>$CONFIG + echo "dtoverlay=pitft28-capacitive,touch-swapxy,touch-invx" >>$CONFIG fi if [ "${PITFT35r}" = "1" ]; then - echo "# Enable PITFT35r display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable PITFT35r display" >>$CONFIG + echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>$CONFIG fi # UART support if [ "${ENABLE_UART}" = "1" ]; then - echo "# Enable UART" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "enable_uart=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable UART" >>$CONFIG + echo "enable_uart=1" >>$CONFIG fi # Infrared support if [ "${ENABLE_IR}" = "1" ]; then - echo "# Enable infrared" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=gpio-ir,gpio_pin=${GPIO_IR}" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=gpio-ir-tx,gpio_pin=${GPIO_IR_TX}" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable infrared" >>$CONFIG + echo "dtoverlay=gpio-ir,gpio_pin=${GPIO_IR}" >>$CONFIG + echo "dtoverlay=gpio-ir-tx,gpio_pin=${GPIO_IR_TX}" >>$CONFIG fi # VC4 Graphics support if [ "${VC4GRAPHICS}" = "1" ]; then - echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=${VC4DTBO}" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable VC4 Graphics" >> $CONFIG + echo "dtoverlay=${VC4DTBO}" >> $CONFIG fi # Choose Camera Sensor to be used, default imx219 sensor if [ "${RASPBERRYPI_CAMERA_V2}" = "1" ]; then - echo "# Enable Sony RaspberryPi Camera" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=imx219" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable Sony RaspberryPi Camera" >> $CONFIG + echo "dtoverlay=imx219" >> $CONFIG fi # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm) if [ "${WAVESHARE_1024X600_C_2_1}" = "1" ]; then - echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "max_usb_current=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "hdmi_group=2" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "hdmi_mode=87" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "hdmi_drive=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> $CONFIG + echo "max_usb_current=1" >> $CONFIG + echo "hdmi_group=2" >> $CONFIG + echo "hdmi_mode=87" >> $CONFIG + echo "hdmi_cvt 1024 600 60 6 0 0 0" >> $CONFIG + echo "hdmi_drive=1" >> $CONFIG fi # DWC2 USB peripheral support if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then - echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable USB peripheral mode" >> $CONFIG + echo "dtoverlay=dwc2,dr_mode=peripheral" >> $CONFIG + fi + + # DWC2 USB host mode support + if [ "${ENABLE_DWC2_HOST}" = "1" ]; then + echo "# Enable USB host mode" >> $CONFIG + echo "dtoverlay=dwc2,dr_mode=host" >> $CONFIG fi # AT86RF23X support if [ "${ENABLE_AT86RF}" = "1" ]; then - echo "# Enable AT86RF23X" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable AT86RF23X" >>$CONFIG + echo "dtoverlay=at86rf233,speed=3000000" >>$CONFIG fi # ENABLE DUAL CAN if [ "${ENABLE_DUAL_CAN}" = "1" ]; then - echo "# Enable DUAL CAN" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=mcp2515-can1,oscillator=${CAN_OSCILLATOR},interrupt=24" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable DUAL CAN" >>$CONFIG + echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>$CONFIG + echo "dtoverlay=mcp2515-can1,oscillator=${CAN_OSCILLATOR},interrupt=24" >>$CONFIG # ENABLE CAN elif [ "${ENABLE_CAN}" = "1" ]; then - echo "# Enable CAN" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable CAN" >>$CONFIG + echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>$CONFIG fi # Append extra config if the user has provided any - printf "${RPI_EXTRA_CONFIG}\n" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + printf "${RPI_EXTRA_CONFIG}\n" >> $CONFIG # Handle setup with armstub file if [ "${@bb.utils.contains("MACHINE_FEATURES", "armstub", "1", "0", d)}" = "1" ]; then - echo "\n# ARM stub configuration" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "armstub=${ARMSTUB}" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "\n# ARM stub configuration" >> $CONFIG + echo "armstub=${ARMSTUB}" >> $CONFIG case "${ARMSTUB}" in *-gic.bin) - echo "enable_gic=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "enable_gic=1" >> $CONFIG ;; esac fi } do_deploy_append_raspberrypi3-64() { - echo "# have a properly sized image" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "disable_overscan=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# have a properly sized image" >> $CONFIG + echo "disable_overscan=1" >> $CONFIG - echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt - echo "dtparam=audio=on" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt + echo "# Enable audio (loads snd_bcm2835)" >> $CONFIG + echo "dtparam=audio=on" >> $CONFIG } addtask deploy before do_build after do_install diff --git a/meta-raspberrypi/recipes-bsp/common/raspberrypi-firmware.inc b/meta-raspberrypi/recipes-bsp/common/raspberrypi-firmware.inc index 649c7ea97..591c6157f 100644 --- a/meta-raspberrypi/recipes-bsp/common/raspberrypi-firmware.inc +++ b/meta-raspberrypi/recipes-bsp/common/raspberrypi-firmware.inc @@ -1,9 +1,9 @@ -RPIFW_DATE ?= "20201123" -SRCREV ?= "8f13114b9ea29bd004151d4a8afa500b2df721be" +RPIFW_DATE ?= "20210205" +SRCREV ?= "7d91570f20378afc9414107dccdad70705a8a342" RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/${SRCREV}.tar.gz;downloadfilename=raspberrypi-firmware-${SRCREV}.tar.gz" RPIFW_S ?= "${WORKDIR}/firmware-${SRCREV}" SRC_URI = "${RPIFW_SRC_URI}" -SRC_URI[sha256sum] = "f9be0cc177aae7dddaa0a2967d090ea33a95be9dd519d2eee3bc740af8ffb19e" +SRC_URI[sha256sum] = "2cc9bf2cbcab8283db2eb53ed2a49372b70fe76538994c32f6d261e2da3e9ff4" PV = "${RPIFW_DATE}" diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb index 9b2b6f322..ff8ce7993 100644 --- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb +++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb @@ -22,9 +22,7 @@ SRC_URI = " \ require linux-raspberrypi.inc -LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" - -KERNEL_EXTRA_ARGS += "DTC_FLAGS='-@ -H epapr'" +KERNEL_DTC_FLAGS += "-@ -H epapr" # Disable version check so that we don't have to edit this recipe every time # upstream bumps the version diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc index db1dbdb85..5ad9b781b 100644 --- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc +++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc @@ -1,14 +1,14 @@ DESCRIPTION = "Linux Kernel for Raspberry Pi" SECTION = "kernel" LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" COMPATIBLE_MACHINE = "^rpi$" PE = "1" PV = "${LINUX_VERSION}+git${SRCPV}" -inherit kernel siteinfo +inherit siteinfo require recipes-kernel/linux/linux-yocto.inc SRC_URI += " \ diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.10.bb b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.10.bb new file mode 100644 index 000000000..6af434e07 --- /dev/null +++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.10.bb @@ -0,0 +1,18 @@ +LINUX_VERSION ?= "5.10.13" +LINUX_RPI_BRANCH ?= "rpi-5.10.y" + +SRCREV_machine = "34263dc81a12862c66e2593bb26c09d5fd20f46d" +SRCREV_meta = "5833ca701711d487c9094bd1efc671e8ef7d001e" + +KMETA = "kernel-meta" + +SRC_URI = " \ + git://github.com/raspberrypi/linux.git;name=machine;branch=${LINUX_RPI_BRANCH} \ + git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.10;destsuffix=${KMETA} \ + file://powersave.cfg \ + file://android-drivers.cfg \ + " + +require linux-raspberrypi.inc + +KERNEL_DTC_FLAGS += "-@ -H epapr" diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb index 1d04c2fa7..ba97ed56e 100644 --- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb +++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb @@ -1,8 +1,8 @@ -LINUX_VERSION ?= "5.4.79" +LINUX_VERSION ?= "5.4.83" LINUX_RPI_BRANCH ?= "rpi-5.4.y" -SRCREV_machine = "9797f1a4938c20139b00a25de93cc99efb5c291b" -SRCREV_meta = "5d52d9eea95fa09d404053360c2351b2b91b323b" +SRCREV_machine = "08ae2dd9e7dc89c20bff823a3ef045de09bfd090" +SRCREV_meta = "d676bf5ff7b7071e14f44498d2482c0a596f14cd" KMETA = "kernel-meta" @@ -19,4 +19,4 @@ require linux-raspberrypi.inc LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814" -KERNEL_EXTRA_ARGS += "DTC_FLAGS='-@ -H epapr'" +KERNEL_DTC_FLAGS += "-@ -H epapr" -- cgit v1.2.3