From b6d590af3f28f1737ff681ed0ed94d812878962c Mon Sep 17 00:00:00 2001 From: Patrick Williams Date: Tue, 26 Oct 2021 06:47:53 -0500 Subject: meta-xilinx: remove subtree The meta-xilinx layer was used for a now-deleted EVB. Neither the EVB nor the meta-xilinx layer have been updated for the Yocto override syntax change and the meta-xilinx still doesn't have a hardknott or honister branch (or corresponding support). I've asked the Xilinx maintainer back in May on when a hardknott version would be supported and I was told "about a month from now". I followed up in August and was told "work is in progress". As of today there are still zero commits in meta-xilinx since January 2021. As such, I do not believe this layer is well-maintained and we have no specific use for it anymore. Remove it until someone finds a good reason to include it and the upstream shows signs of life. Signed-off-by: Patrick Williams Change-Id: Id14ea55db2ac2779edf42e63cb57ad7d25172ad5 --- .../meta-xilinx-bsp/conf/machine/zc702-zynq7.conf | 58 ---------------------- 1 file changed, 58 deletions(-) delete mode 100644 meta-xilinx/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf (limited to 'meta-xilinx/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf') diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf deleted file mode 100644 index edd3cb2d4..000000000 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zc702-zynq7.conf +++ /dev/null @@ -1,58 +0,0 @@ -#@TYPE: Machine -#@NAME: zc702-zynq7 -#@DESCRIPTION: Machine support for ZC702 Evaluation Board. -# -# For details on the Evaluation board: -# http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm -# For documentation and design files for the ZC702: -# http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/zynq-7000_soc_boards_and_kits/zynq-7000_soc_zc702_evaluation_kit.html -# For the FSBL 'zynq_fsbl_0.elf' refer to UG873 and the associated design files. -# - -require conf/machine/include/soc-zynq.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -# u-boot configuration -UBOOT_MACHINE = "xilinx_zynq_virt_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - virtual/boot-bin \ - virtual/bootloader \ - u-boot-zynq-scr \ - " - -SERIAL_CONSOLES ?= "115200;ttyPS0" - -KERNEL_DEVICETREE = "zynq-zc702.dtb" - -IMAGE_BOOT_FILES += " \ - boot.bin \ - uEnv.txt \ - boot.scr \ - " - -QB_MEM = "-m 1024" -QB_NETWORK_DEVICE = "-net nic,netdev=eth0 -netdev user,id=eth0,tftp=/tftpboot -net nic" -QB_DEFAULT_KERNEL_qemuboot-xilinx = "zImage" - -QB_SYSTEM_NAME ?= "${@qemu_target_binary(d)}" -QB_DEFAULT_FSTYPE = "cpio.gz.u-boot" -QB_DTB = "system.dtb" -QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" - -# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) -QB_OPT_APPEND = " \ - -nographic -serial null -serial mon:stdio \ - -initrd ${DEPLOY_DIR_IMAGE}/petalinux-image-minimal-zc702-zynq7.cpio.gz.u-boot \ - -gdb tcp::9000 \ - -device loader,addr=0xf8000008,data=0xDF0D,data-len=4 \ - -device loader,addr=0xf8000140,data=0x00500801,data-len=4 \ - -device loader,addr=0xf800012c,data=0x1ed044d,data-len=4 \ - -device loader,addr=0xf8000108,data=0x0001e008,data-len=4 \ - -device loader,addr=0xF8000910,data=0xF,data-len=0x4 \ - " -- cgit v1.2.3