FILESEXTRAPATHS_append_wolfpass:= "${THISDIR}/files:" # the meta-phosphor layer adds this patch, which conflicts # with the intel layout for environment SRC_URI_remove_wolfpass = " file://0001-configs-ast-Add-redundnant-env.patch" SRC_URI_append_wolfpass = " \ file://0001-flash-use-readX-writeX-not-udelay.patch \ file://0002-intel-layout-environment-addr.patch \ file://0004-Make-sure-debug-uart-is-using-24MHz-clock-source.patch \ file://0005-enable-passthrough-in-uboot.patch \ file://0006-Add-Aspeed-g5-interrupt-support.patch \ file://0007-Add-espi-support.patch \ file://0008-add-sgio-support-for-port80-snoop-post-LEDs.patch \ file://0009-Add-basic-GPIO-support.patch \ file://0010-Update-Force-Firmware-Update-Jumper-to-use-new-gpio.patch \ file://0011-Add-basic-timer-support-for-Aspeed-g5-in-U-Boot.patch \ file://0012-Add-status-and-ID-LED-support.patch \ file://0013-aspeed-Add-Pwm-Driver.patch \ file://0014-Keep-interrupts-enabled-until-last-second.patch \ file://0015-Rewrite-memmove-to-optimize-on-word-transfers.patch \ file://0016-Add-support-for-128MB-Macronix-spi-flash-MX66L1G45G.patch \ file://0017-Enable-Macronix-and-Micron-SPI-support.patch \ file://0018-Add-support-for-Macronix-and-Micron-1Gbits-SPI-flash.patch \ file://0019-u-boot-full-platform-reset-espi-oob-ready.patch \ file://0020-Enable-PCIe-L1-support.patch \ file://0020-Add-system-reset-status-support.patch \ file://0021-Config-host-uart-clock-source-using-environment-vari.patch \ file://0022-KCS-driver-support-in-uBoot.patch \ file://0023-Add-TPM-enable-pulse-triggering.patch \ file://0024-IPMI-command-handler-implementation-in-uboot.patch \ file://0025-Manufacturing-mode-physical-presence-detection.patch \ file://0026-Aspeed-I2C-support-in-U-Boot.patch \ file://0027-CPLD-u-boot-commands-support-for-PFR.patch \ file://0028-Enabling-uart1-uart2-in-u-boot-for-BIOS-messages.patch \ " SRC_URI_append_wolfpass += "${@bb.utils.contains('IMAGE_TYPE', 'pfr', 'file://0022-u-boot-env-change-for-PFR-image.patch', '', d)}"