FILESEXTRAPATHS_append_intel-ast2500:= "${THISDIR}/files:" # the meta-phosphor layer adds this patch, which conflicts # with the intel layout for environment SRC_URI_remove_intel-ast2500 = " file://0001-configs-ast-Add-redundnant-env.patch" SRC_URI_append_intel-ast2500 = " \ file://0001-flash-use-readX-writeX-not-udelay.patch \ file://0002-intel-layout-environment-addr.patch \ file://0004-Make-sure-debug-uart-is-using-24MHz-clock-source.patch \ file://0005-enable-passthrough-in-uboot.patch \ file://0006-Add-Aspeed-g5-interrupt-support.patch \ file://0007-Add-espi-support.patch \ file://0008-add-sgio-support-for-port80-snoop-post-LEDs.patch \ file://0009-Add-basic-GPIO-support.patch \ file://0010-Update-Force-Firmware-Update-Jumper-to-use-new-gpio.patch \ file://0011-Add-basic-timer-support-for-Aspeed-g5-in-U-Boot.patch \ file://0012-Add-status-and-ID-LED-support.patch \ file://0013-aspeed-Add-Pwm-Driver.patch \ file://0014-Keep-interrupts-enabled-until-last-second.patch \ file://0015-Rewrite-memmove-to-optimize-on-word-transfers.patch \ file://0019-u-boot-full-platform-reset-espi-oob-ready.patch \ file://0020-Enable-PCIe-L1-support.patch \ file://0020-Add-system-reset-status-support.patch \ file://0021-Config-host-uart-clock-source-using-environment-vari.patch \ file://0022-KCS-driver-support-in-uBoot.patch \ file://0023-Add-TPM-enable-pulse-triggering.patch \ file://0024-IPMI-command-handler-implementation-in-uboot.patch \ file://0025-Manufacturing-mode-physical-presence-detection.patch \ file://0026-Aspeed-I2C-support-in-U-Boot.patch \ file://0027-CPLD-u-boot-commands-support-for-PFR.patch \ file://0028-Enabling-uart1-uart2-in-u-boot-for-BIOS-messages.patch \ file://0029-FFUJ-FW-IPMI-commands-and-flash-support-in-u-boot.patch \ file://0030-Support-Get-Set-Security-mode-command.patch \ file://0031-Make-it-so-TFTP-port-can-be-modified.patch \ file://0033-Reboot-into-UBOOT-on-Watchdog-Failures.patch \ file://0034-Disable-uart-debug-interface.patch \ file://0036-Re-Enable-KCS.patch \ file://0037-aspeed-ast-scu.c-fix-MAC1LINK-and-MAC2LINK-pin-pads-.patch \ " PFR_SRC_URI = " \ file://0022-u-boot-env-change-for-PFR-image.patch \ file://0032-PFR-FW-update-and-checkpoint-support-in-u-boot.patch \ file://0035-PFR-platform-EXTRST-reset-mask-selection.patch \ " SRC_URI_append_intel-ast2500 += "${@bb.utils.contains('IMAGE_FSTYPES', 'intel-pfr', PFR_SRC_URI, '', d)}" require recipes-core/os-release/version-vars.inc python do_version () { with open(d.expand('${S}/board/aspeed/ast-g5/intel-version.h'), 'w') as f: f.write(d.expand('#define VER_MAJOR ${IPMI_MAJOR}\n')) f.write(d.expand('#define VER_MINOR ${IPMI_MINOR}\n')) f.write(d.expand('#define VER_AUX13 ${IPMI_AUX13}\n')) f.write(d.expand('#define VER_AUX14 ${IPMI_AUX14}\n')) f.write(d.expand('#define VER_AUX15 ${IPMI_AUX15}\n')) f.write(d.expand('#define VER_AUX16 ${IPMI_AUX16}\n')) } do_version[vardepsexclude] = "IPMI_MAJOR IPMI_MINOR IPMI_AUX13 IPMI_AUX14 IPMI_AUX15 IPMI_AUX16 PRODUCT_GENERATION VERSION VERSION_ID BUILD_ID" addtask do_version after do_configure before do_compile