From 0bc5efede7c99da41fc0cbadfb1644b428ead9d3 Mon Sep 17 00:00:00 2001 From: Jae Hyun Yoo Date: Tue, 11 Jun 2019 15:07:08 -0700 Subject: [PATCH] i2c: aspeed: add buffer mode transfer support Byte mode currently this driver uses makes lots of interrupt call which isn't good for performance and it makes the driver very timing sensitive. To improve performance of the driver, this commit adds buffer mode transfer support which uses I2C SRAM buffer instead of using a single byte buffer. AST2400: It has 2 KBytes (256 Bytes x 8 pages) of I2C SRAM buffer pool from 0x1e78a800 to 0x1e78afff that can be used for all busses with buffer pool manipulation. To simplify implementation for supporting both AST2400 and AST2500, it assigns each 128 Bytes per bus without using buffer pool manipulation so total 1792 Bytes of I2C SRAM buffer will be used. AST2500: It has 16 Bytes of individual I2C SRAM buffer per each bus and its range is from 0x1e78a200 to 0x1e78a2df, so it doesn't have 'buffer page selection' bit field in the Function control register, and neither 'base address pointer' bit field in the Pool buffer control register it has. To simplify implementation for supporting both AST2400 and AST2500, it writes zeros on those register bit fields but it's okay because it does nothing in AST2500. It provides buffer based master and slave data transfer. Signed-off-by: Jae Hyun Yoo --- .../devicetree/bindings/i2c/i2c-aspeed.txt | 40 ++- arch/arm/boot/dts/aspeed-g4.dtsi | 47 ++-- arch/arm/boot/dts/aspeed-g5.dtsi | 47 ++-- arch/arm/boot/dts/aspeed-g6.dtsi | 34 +-- drivers/i2c/busses/i2c-aspeed.c | 294 ++++++++++++++++++--- 5 files changed, 366 insertions(+), 96 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index 7da7e813b2b0..0ff3539cee95 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -3,7 +3,10 @@ Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs. Required Properties: - #address-cells : should be 1 - #size-cells : should be 0 -- reg : address offset and range of bus +- reg : Address offset and range of bus registers. + An additional SRAM buffer address offset and range is + optional in case of enabling I2C dedicated SRAM for + buffer mode transfer support. - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB @@ -28,12 +31,21 @@ i2c { #size-cells = <1>; ranges = <0 0x1e78a000 0x1000>; - i2c_ic: interrupt-controller@0 { - #interrupt-cells = <1>; - compatible = "aspeed,ast2400-i2c-ic"; + i2c_gr: i2c-global-regs@0 { + compatible = "aspeed,ast2500-i2c-gr", "syscon"; reg = <0x0 0x40>; - interrupts = <12>; - interrupt-controller; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40>; + + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-i2c-ic"; + reg = <0x0 0x4>; + interrupts = <12>; + interrupt-controller; + }; }; i2c0: i2c-bus@40 { @@ -41,11 +53,25 @@ i2c { #size-cells = <0>; #interrupt-cells = <1>; reg = <0x40 0x40>; - compatible = "aspeed,ast2400-i2c-bus"; + compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; }; + + /* buffer mode transfer enabled */ + i2c1: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x40>, <0x210 0x10>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; + bus-frequency = <100000>; + interrupts = <1>; + interrupt-parent = <&i2c_ic>; + }; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 14e5dc260a3b..68f40a89c91f 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -519,12 +519,21 @@ }; &i2c { - i2c_ic: interrupt-controller@0 { - #interrupt-cells = <1>; - compatible = "aspeed,ast2400-i2c-ic"; + i2c_gr: i2c-global-regs@0 { + compatible = "aspeed,ast2400-i2c-gr", "syscon"; reg = <0x0 0x40>; - interrupts = <12>; - interrupt-controller; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40>; + + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x4>; + interrupts = <12>; + interrupt-controller; + }; }; i2c0: i2c-bus@40 { @@ -532,7 +541,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x40 0x40>; + reg = <0x40 0x40>, <0x800 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -548,7 +557,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x80 0x40>; + reg = <0x80 0x40>, <0x880 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -564,7 +573,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0xc0 0x40>; + reg = <0xc0 0x40>, <0x900 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -581,7 +590,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x100 0x40>; + reg = <0x100 0x40>, <0x980 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -598,7 +607,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x140 0x40>; + reg = <0x140 0x40>, <0xa00 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -615,7 +624,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x180 0x40>; + reg = <0x180 0x40>, <0xa80 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -632,7 +641,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x1c0 0x40>; + reg = <0x1c0 0x40>, <0xb00 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -649,7 +658,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x300 0x40>; + reg = <0x300 0x40>, <0xb80 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -666,7 +675,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x340 0x40>; + reg = <0x340 0x40>, <0xc00 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -683,7 +692,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x380 0x40>; + reg = <0x380 0x40>, <0xc80 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -700,7 +709,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x3c0 0x40>; + reg = <0x3c0 0x40>, <0xd00 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -717,7 +726,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x400 0x40>; + reg = <0x400 0x40>, <0xd80 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -734,7 +743,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x440 0x40>; + reg = <0x440 0x40>, <0xe00 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -751,7 +760,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x480 0x40>; + reg = <0x480 0x40>, <0xe80 0x80>; compatible = "aspeed,ast2400-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 3d615708a0cd..fdc669ebfb84 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -616,12 +616,21 @@ }; &i2c { - i2c_ic: interrupt-controller@0 { - #interrupt-cells = <1>; - compatible = "aspeed,ast2500-i2c-ic"; + i2c_gr: i2c-global-regs@0 { + compatible = "aspeed,ast2500-i2c-gr", "syscon"; reg = <0x0 0x40>; - interrupts = <12>; - interrupt-controller; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40>; + + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-i2c-ic"; + reg = <0x0 0x4>; + interrupts = <12>; + interrupt-controller; + }; }; i2c0: i2c-bus@40 { @@ -629,7 +638,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x40 0x40>; + reg = <0x40 0x40>, <0x200 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -645,7 +654,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x80 0x40>; + reg = <0x80 0x40>, <0x210 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -661,7 +670,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0xc0 0x40>; + reg = <0xc0 0x40>, <0x220 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -678,7 +687,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x100 0x40>; + reg = <0x100 0x40>, <0x230 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -695,7 +704,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x140 0x40>; + reg = <0x140 0x40>, <0x240 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -712,7 +721,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x180 0x40>; + reg = <0x180 0x40>, <0x250 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -729,7 +738,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x1c0 0x40>; + reg = <0x1c0 0x40>, <0x260 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -746,7 +755,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x300 0x40>; + reg = <0x300 0x40>, <0x270 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -763,7 +772,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x340 0x40>; + reg = <0x340 0x40>, <0x280 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -780,7 +789,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x380 0x40>; + reg = <0x380 0x40>, <0x290 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -797,7 +806,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x3c0 0x40>; + reg = <0x3c0 0x40>, <0x2a0 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -814,7 +823,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x400 0x40>; + reg = <0x400 0x40>, <0x2b0 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -831,7 +840,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x440 0x40>; + reg = <0x440 0x40>, <0x2c0 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; @@ -848,7 +857,7 @@ #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x480 0x40>; + reg = <0x480 0x40>, <0x2d0 0x10>; compatible = "aspeed,ast2500-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB>; resets = <&syscon ASPEED_RESET_I2C>; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 2ad90a906266..2dd89efee37c 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -530,11 +530,11 @@ #include "aspeed-g6-pinctrl.dtsi" &i2c { - i2c0: i2c-bus@40 { + i2c0: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x80 0x80>; + reg = <0x80 0x80>, <0xc00 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -549,7 +549,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x100 0x80>; + reg = <0x100 0x80>, <0xc20 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -564,7 +564,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x180 0x80>; + reg = <0x180 0x80>, <0xc40 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -579,7 +579,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x200 0x80>; + reg = <0x200 0x80>, <0xc60 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -594,7 +594,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x280 0x80>; + reg = <0x280 0x80>, <0xc80 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -609,7 +609,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x300 0x80>; + reg = <0x300 0x80>, <0xca0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -624,7 +624,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x380 0x80>; + reg = <0x380 0x80>, <0xcc0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -639,7 +639,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x400 0x80>; + reg = <0x400 0x80>, <0xce0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -654,7 +654,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x480 0x80>; + reg = <0x480 0x80>, <0xd00 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -669,7 +669,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x500 0x80>; + reg = <0x500 0x80>, <0xd20 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -684,7 +684,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x580 0x80>; + reg = <0x580 0x80>, <0xd40 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -699,7 +699,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x600 0x80>; + reg = <0x600 0x80>, <0xd60 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -714,7 +714,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x680 0x80>; + reg = <0x680 0x80>, <0xd80 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -729,7 +729,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x700 0x80>; + reg = <0x700 0x80>, <0xda0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -744,7 +744,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x780 0x80>; + reg = <0x780 0x80>, <0xdc0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; @@ -759,7 +759,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; - reg = <0x800 0x80>; + reg = <0x800 0x80>, <0xde0 0x20>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB1>; resets = <&syscon ASPEED_RESET_I2C>; diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index b9f425739940..3831466912b4 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -7,6 +7,7 @@ * Copyright 2017 Google, Inc. */ +#include #include #include #include @@ -19,15 +20,24 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include -/* I2C Register */ +/* I2C Global Registers */ +/* 0x00 : I2CG Interrupt Status Register */ +/* 0x08 : I2CG Interrupt Target Assignment */ +/* 0x0c : I2CG Global Control Register (AST2500) */ +#define ASPEED_I2CG_GLOBAL_CTRL_REG 0x0c +#define ASPEED_I2CG_SRAM_BUFFER_EN BIT(0) + +/* I2C Bus Registers */ #define ASPEED_I2C_FUN_CTRL_REG 0x00 #define ASPEED_I2C_AC_TIMING_REG1 0x04 #define ASPEED_I2C_AC_TIMING_REG2 0x08 @@ -35,14 +45,12 @@ #define ASPEED_I2C_INTR_STS_REG 0x10 #define ASPEED_I2C_CMD_REG 0x14 #define ASPEED_I2C_DEV_ADDR_REG 0x18 +#define ASPEED_I2C_BUF_CTRL_REG 0x1c #define ASPEED_I2C_BYTE_BUF_REG 0x20 -/* Global Register Definition */ -/* 0x00 : I2C Interrupt Status Register */ -/* 0x08 : I2C Interrupt Target Assignment */ - /* Device Register Definition */ /* 0x00 : I2CD Function Control Register */ +#define ASPEED_I2CD_BUFFER_PAGE_SEL_MASK GENMASK(22, 20) #define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) #define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) @@ -102,6 +110,8 @@ #define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) /* Command Bit */ +#define ASPEED_I2CD_RX_BUFF_ENABLE BIT(7) +#define ASPEED_I2CD_TX_BUFF_ENABLE BIT(6) #define ASPEED_I2CD_M_STOP_CMD BIT(5) #define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) #define ASPEED_I2CD_M_RX_CMD BIT(3) @@ -112,6 +122,13 @@ /* 0x18 : I2CD Slave Device Address Register */ #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) +/* 0x1c : I2CD Buffer Control Register */ +/* Use 8-bits or 6-bits wide bit fileds to support both AST2400 and AST2500 */ +#define ASPEED_I2CD_BUF_RX_COUNT_MASK GENMASK(31, 24) +#define ASPEED_I2CD_BUF_RX_SIZE_MASK GENMASK(23, 16) +#define ASPEED_I2CD_BUF_TX_COUNT_MASK GENMASK(15, 8) +#define ASPEED_I2CD_BUF_OFFSET_MASK GENMASK(5, 0) + enum aspeed_i2c_master_state { ASPEED_I2C_MASTER_INACTIVE, ASPEED_I2C_MASTER_PENDING, @@ -157,6 +174,11 @@ struct aspeed_i2c_bus { int master_xfer_result; /* Multi-master */ bool multi_master; + /* Buffer mode */ + void __iomem *buf_base; + size_t buf_size; + u8 buf_offset; + u8 buf_page; #if IS_ENABLED(CONFIG_I2C_SLAVE) struct i2c_client *slave; enum aspeed_i2c_slave_state slave_state; @@ -253,6 +275,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) { u32 command, irq_handled = 0; struct i2c_client *slave = bus->slave; + int i, len; u8 value; if (!slave) @@ -275,7 +298,12 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) /* Slave was sent something. */ if (irq_status & ASPEED_I2CD_INTR_RX_DONE) { - value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; + if (bus->buf_base && + bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED && + !(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP)) + value = readb(bus->buf_base); + else + value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; /* Handle address frame. */ if (bus->slave_state == ASPEED_I2C_SLAVE_START) { if (value & 0x1) @@ -290,6 +318,20 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) /* Slave was asked to stop. */ if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) { + if (bus->slave_state == ASPEED_I2C_SLAVE_WRITE_RECEIVED && + irq_status & ASPEED_I2CD_INTR_RX_DONE) { + if (bus->buf_base) { + len = FIELD_GET(ASPEED_I2CD_BUF_RX_COUNT_MASK, + readl(bus->base + + ASPEED_I2C_BUF_CTRL_REG)); + for (i = 0; i < len; i++) { + value = readb(bus->buf_base + i); + i2c_slave_event(slave, + I2C_SLAVE_WRITE_RECEIVED, + &value); + } + } + } irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; bus->slave_state = ASPEED_I2C_SLAVE_STOP; } @@ -322,9 +364,36 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) case ASPEED_I2C_SLAVE_WRITE_REQUESTED: bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED; i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); + if (bus->buf_base) { + writel(FIELD_PREP(ASPEED_I2CD_BUF_RX_SIZE_MASK, + bus->buf_size - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + writel(ASPEED_I2CD_RX_BUFF_ENABLE, + bus->base + ASPEED_I2C_CMD_REG); + } break; case ASPEED_I2C_SLAVE_WRITE_RECEIVED: i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value); + if (bus->buf_base) { + len = FIELD_GET(ASPEED_I2CD_BUF_RX_COUNT_MASK, + readl(bus->base + + ASPEED_I2C_BUF_CTRL_REG)); + for (i = 1; i < len; i++) { + value = readb(bus->buf_base + i); + i2c_slave_event(slave, + I2C_SLAVE_WRITE_RECEIVED, + &value); + } + writel(FIELD_PREP(ASPEED_I2CD_BUF_RX_SIZE_MASK, + bus->buf_size - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + writel(ASPEED_I2CD_RX_BUFF_ENABLE, + bus->base + ASPEED_I2C_CMD_REG); + } break; case ASPEED_I2C_SLAVE_STOP: i2c_slave_event(slave, I2C_SLAVE_STOP, &value); @@ -350,6 +419,8 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; u8 slave_addr = i2c_8bit_addr_from_msg(msg); + u8 wbuf[4]; + int len; #if IS_ENABLED(CONFIG_I2C_SLAVE) /* @@ -368,12 +439,66 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) if (msg->flags & I2C_M_RD) { command |= ASPEED_I2CD_M_RX_CMD; - /* Need to let the hardware know to NACK after RX. */ - if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) - command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + + if (bus->buf_base && !(msg->flags & I2C_M_RECV_LEN)) { + command |= ASPEED_I2CD_RX_BUFF_ENABLE; + + if (msg->len > bus->buf_size) { + len = bus->buf_size; + } else { + len = msg->len; + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } + + writel(FIELD_PREP(ASPEED_I2CD_BUF_RX_SIZE_MASK, + len - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + } else { + /* Need to let the hardware know to NACK after RX. */ + if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } + } else { + if (bus->buf_base) { + int i; + + command |= ASPEED_I2CD_TX_BUFF_ENABLE; + + if (msg->len + 1 > bus->buf_size) + len = bus->buf_size; + else + len = msg->len + 1; + + /* + * Yeah, it looks clumsy but byte writings on a remapped + * I2C SRAM cause corruptions so use this way to make + * dword writings. + */ + wbuf[0] = slave_addr; + for (i = 1; i < len; i++) { + wbuf[i % 4] = msg->buf[i - 1]; + if (i % 4 == 3) + writel(*(u32 *)wbuf, + bus->buf_base + i - 3); + } + if (--i % 4 != 3) + writel(*(u32 *)wbuf, + bus->buf_base + i - (i % 4)); + + bus->buf_index = len - 1; + + writel(FIELD_PREP(ASPEED_I2CD_BUF_TX_COUNT_MASK, + len - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + } } - writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); + if (!(command & ASPEED_I2CD_TX_BUFF_ENABLE)) + writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); writel(command, bus->base + ASPEED_I2C_CMD_REG); } @@ -413,7 +538,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) u32 irq_handled = 0, command = 0; struct i2c_msg *msg; u8 recv_byte; - int ret; + int ret, len; if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { bus->master_state = ASPEED_I2C_MASTER_INACTIVE; @@ -526,11 +651,43 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) /* fall through */ case ASPEED_I2C_MASTER_TX_FIRST: if (bus->buf_index < msg->len) { + command = ASPEED_I2CD_M_TX_CMD; + + if (bus->buf_base) { + u8 wbuf[4]; + int i; + + command |= ASPEED_I2CD_TX_BUFF_ENABLE; + + if (msg->len - bus->buf_index > bus->buf_size) + len = bus->buf_size; + else + len = msg->len - bus->buf_index; + + for (i = 0; i < len; i++) { + wbuf[i % 4] = msg->buf[bus->buf_index + + i]; + if (i % 4 == 3) + writel(*(u32 *)wbuf, + bus->buf_base + i - 3); + } + if (--i % 4 != 3) + writel(*(u32 *)wbuf, + bus->buf_base + i - (i % 4)); + + bus->buf_index += len; + + writel(FIELD_PREP(ASPEED_I2CD_BUF_TX_COUNT_MASK, + len - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + } else { + writel(msg->buf[bus->buf_index++], + bus->base + ASPEED_I2C_BYTE_BUF_REG); + } + writel(command, bus->base + ASPEED_I2C_CMD_REG); bus->master_state = ASPEED_I2C_MASTER_TX; - writel(msg->buf[bus->buf_index++], - bus->base + ASPEED_I2C_BYTE_BUF_REG); - writel(ASPEED_I2CD_M_TX_CMD, - bus->base + ASPEED_I2C_CMD_REG); } else { aspeed_i2c_next_msg_or_stop(bus); } @@ -547,25 +704,56 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) } irq_handled |= ASPEED_I2CD_INTR_RX_DONE; - recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; - msg->buf[bus->buf_index++] = recv_byte; - - if (msg->flags & I2C_M_RECV_LEN) { - if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { - bus->cmd_err = -EPROTO; - aspeed_i2c_do_stop(bus); - goto out_no_complete; + if (bus->buf_base && !(msg->flags & I2C_M_RECV_LEN)) { + len = FIELD_GET(ASPEED_I2CD_BUF_RX_COUNT_MASK, + readl(bus->base + + ASPEED_I2C_BUF_CTRL_REG)); + memcpy_fromio(msg->buf + bus->buf_index, + bus->buf_base, len); + bus->buf_index += len; + } else { + recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) + >> 8; + msg->buf[bus->buf_index++] = recv_byte; + + if (msg->flags & I2C_M_RECV_LEN) { + if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { + bus->cmd_err = -EPROTO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + msg->len = recv_byte + + ((msg->flags & I2C_CLIENT_PEC) ? + 2 : 1); + msg->flags &= ~I2C_M_RECV_LEN; } - msg->len = recv_byte + - ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); - msg->flags &= ~I2C_M_RECV_LEN; } if (bus->buf_index < msg->len) { - bus->master_state = ASPEED_I2C_MASTER_RX; command = ASPEED_I2CD_M_RX_CMD; - if (bus->buf_index + 1 == msg->len) - command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + bus->master_state = ASPEED_I2C_MASTER_RX; + if (bus->buf_base) { + command |= ASPEED_I2CD_RX_BUFF_ENABLE; + + if (msg->len - bus->buf_index > + bus->buf_size) { + len = bus->buf_size; + } else { + len = msg->len - bus->buf_index; + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } + + writel(FIELD_PREP(ASPEED_I2CD_BUF_RX_SIZE_MASK, + len - 1) | + FIELD_PREP(ASPEED_I2CD_BUF_TX_COUNT_MASK, + 0) | + FIELD_PREP(ASPEED_I2CD_BUF_OFFSET_MASK, + bus->buf_offset), + bus->base + ASPEED_I2C_BUF_CTRL_REG); + } else { + if (bus->buf_index + 1 == msg->len) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } writel(command, bus->base + ASPEED_I2C_CMD_REG); } else { aspeed_i2c_next_msg_or_stop(bus); @@ -911,6 +1099,9 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, if (ret < 0) return ret; + fun_ctrl_reg |= FIELD_PREP(ASPEED_I2CD_BUFFER_PAGE_SEL_MASK, + bus->buf_page); + if (of_property_read_bool(pdev->dev.of_node, "multi-master")) bus->multi_master = true; else @@ -972,16 +1163,15 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) { const struct of_device_id *match; struct aspeed_i2c_bus *bus; + bool sram_enabled = true; struct clk *parent_clk; - struct resource *res; int irq, ret; bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); if (!bus) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bus->base = devm_ioremap_resource(&pdev->dev, res); + bus->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(bus->base)) return PTR_ERR(bus->base); @@ -1015,6 +1205,42 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) bus->get_clk_reg_val = (u32 (*)(struct device *, u32)) match->data; + /* Enable I2C SRAM in case of AST2500 */ + if (of_device_is_compatible(pdev->dev.of_node, + "aspeed,ast2500-i2c-bus")) { + struct regmap *gr_regmap = syscon_regmap_lookup_by_compatible( + "aspeed,ast2500-i2c-gr"); + if (IS_ERR(gr_regmap)) + ret = PTR_ERR(gr_regmap); + else + ret = regmap_update_bits(gr_regmap, + ASPEED_I2CG_GLOBAL_CTRL_REG, + ASPEED_I2CG_SRAM_BUFFER_EN, + ASPEED_I2CG_SRAM_BUFFER_EN); + + if (ret) + sram_enabled = false; + } + + if (sram_enabled) { + struct resource *res = platform_get_resource(pdev, + IORESOURCE_MEM, 1); + + if (res) + bus->buf_base = devm_ioremap_resource(&pdev->dev, res); + + if (!IS_ERR_OR_NULL(bus->buf_base) && resource_size(res) >= 2) { + bus->buf_size = resource_size(res); + if (of_device_is_compatible(pdev->dev.of_node, + "aspeed,ast2400-i2c-bus")) { + bus->buf_page = ((res->start >> 8) & + GENMASK(3, 0)) - 8; + bus->buf_offset = (res->start >> 2) & + ASPEED_I2CD_BUF_OFFSET_MASK; + } + } + } + /* Initialize the I2C adapter */ spin_lock_init(&bus->lock); init_completion(&bus->cmd_complete); @@ -1050,8 +1276,8 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) platform_set_drvdata(pdev, bus); - dev_info(bus->dev, "i2c bus %d registered, irq %d\n", - bus->adap.nr, irq); + dev_info(bus->dev, "i2c bus %d registered (%s mode), irq %d\n", + bus->adap.nr, bus->buf_base ? "buffer" : "byte", irq); return 0; } -- 2.7.4