From 2e265e85777345a318084c2f1f3b684f7e7ff4a4 Mon Sep 17 00:00:00 2001 From: Cheng C Yang Date: Thu, 28 Mar 2019 18:06:54 +0800 Subject: [PATCH] Change some properties name in SOL Dbus Change some properties name in SOL D-Bus interface to make the meaning of the properties more clearly. Signed-off-by: Cheng C Yang --- xyz/openbmc_project/Ipmi/SOL.interface.yaml | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/xyz/openbmc_project/Ipmi/SOL.interface.yaml b/xyz/openbmc_project/Ipmi/SOL.interface.yaml index 94db59f..96c8c87 100644 --- a/xyz/openbmc_project/Ipmi/SOL.interface.yaml +++ b/xyz/openbmc_project/Ipmi/SOL.interface.yaml @@ -2,8 +2,8 @@ description: > SOL properties use for Get/Set SOL config parameter command in host-ipmid sending config to SOL process in net-ipmid. Since some platforms need to access Get/Set SOL config parameter command - through KCS, and current sol manager is implemented in net-ipmid and - cannot be accessed by host-ipmid, add a dbus interface for host-ipmid + through KCS, and current SOL manager is implemented in net-ipmid and + cannot be accessed by host-ipmid, add a D-Bus interface for host-ipmid command to transfer properties to net-ipmid. This interface will be implemented in phosphor-settings. properties: @@ -17,12 +17,20 @@ properties: description: > SOL Enable property, this controls whether the SOL payload type can be activated. - - name: Authentication + - name: ForceEncryption + type: boolean + description: > + If SOL enable Force Payload Encryption. + - name: ForceAuthentication + type: boolean + description: > + If SOL enable Force Payload Authentication + - name: Privilege type: byte description: > - If SOL enable Force Payload Encryption and Authenticaton. - And the minimun operating privilege level SOL required. - - name: Accumulate + Sets the minimum operating privilege level that is required to + be able to activate SOL by Activate Payload command. + - name: AccumulateIntervalMS type: byte description: > Character Accumulate Interval in 5ms increments. @@ -31,13 +39,14 @@ properties: type: byte description: > BMC will automatically send an SOL character data packet containing - this number of characters. + this number of characters as soon as this number of characters + (or greater) has been accepted from the baseboard serial controller. - name: RetryCount type: byte description: > Packet will be dropped if no ACK/NACK received by time retries expire. - - name: RetryInterval + - name: RetryIntervalMS type: byte description: > Retry Interval in 10ms increments. -- 2.16.2