1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
From 0e83d58efe5bd34430c953713285293cd0756b69 Mon Sep 17 00:00:00 2001
From: AppaRao Puli <apparao.puli@linux.intel.com>
Date: Thu, 20 Jun 2019 18:11:43 +0530
Subject: [PATCH] Manufacturing mode physical presence detection
Support for physical presence of manufacturing mode added.
Front panel power button press for 8 seconds will be detected
and marked as special mode for manufacturing request
Tested:
1. Verified by holding the power button when u-boot boots for
8 seconds, and confirmed that bootargs passed to linux has
special=mfg string
2. Verified in normal condition special=mfg string is not passed.
Change-Id: Id7e7c7e7860c7ef3ae8e3a7a7cfda7ff506c0f2b
Signed-off-by: Richard Marian Thomaiyar <richard.marian.thomaiyar@linux.intel.com>
Signed-off-by: AppaRao Puli <apparao.puli@linux.intel.com>
---
board/aspeed/ast-g5/ast-g5-gpio.h | 2 +-
board/aspeed/ast-g5/ast-g5-intel.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/board/aspeed/ast-g5/ast-g5-gpio.h b/board/aspeed/ast-g5/ast-g5-gpio.h
index a820c0f..ed2499f 100644
--- a/board/aspeed/ast-g5/ast-g5-gpio.h
+++ b/board/aspeed/ast-g5/ast-g5-gpio.h
@@ -72,7 +72,7 @@
#define AMB_LED_PORT_PIN PORT_PIN(GPIO_PORT_S, GPIO_PIN_5)
#define FORCE_BMC_UPDATE_PORT_PIN PORT_PIN(GPIO_PORT_D, GPIO_PIN_0)
#define TPM_EN_PULSE_PORT_PIN PORT_PIN(GPIO_PORT_D, GPIO_PIN_6)
-
+#define FP_PWR_BTN_PORT_PIN PORT_PIN(GPIO_PORT_E, GPIO_PIN_2)
// GPIO Configuration Register bits
#define GPCFG_EVENT_TO_SMI (1 << 7) // 1 == enabled
diff --git a/board/aspeed/ast-g5/ast-g5-intel.c b/board/aspeed/ast-g5/ast-g5-intel.c
index 55afa09..812e3ef 100644
--- a/board/aspeed/ast-g5/ast-g5-intel.c
+++ b/board/aspeed/ast-g5/ast-g5-intel.c
@@ -24,6 +24,7 @@ enum gpio_names {
GPIO_AMBER_LED,
GPIO_FF_UPD_JUMPER,
GPIO_ENABLE_TPM_PULSE,
+ GPIO_FP_PWR_BTN,
};
#define GPIO_CFG_DEFAULT (GPCFG_ACTIVE_HIGH | GPCFG_LEVEL_TRIG)
@@ -55,6 +56,10 @@ static const GPIOValue gpio_table[] = {
/* Enable Pulse -- pin D6 */
[GPIO_ENABLE_TPM_PULSE] = {TPM_EN_PULSE_PORT_PIN, GPCFG_OUTPUT_EN, 0,
GPIO_DEBOUNCE_NONE},
+ /* Front Panel Power Button -- pin E2 */
+ [GPIO_FP_PWR_BTN] = {FP_PWR_BTN_PORT_PIN, GPIO_CFG_DEFAULT, 0,
+ GPIO_DEBOUNCE_8MS},
+
};
#define LPC_SNOOP_ADDR 0x80
@@ -373,6 +378,26 @@ static void update_bootargs_cmd(const char *key, const char *value)
free(buf);
}
+static bool is_mfg_mode_phy_req(void)
+{
+ /*
+ * Assume mfg mode physical request is made, if power button
+ * is pressed continously for 8 seconds, indicate the
+ * same in bootargs
+ */
+ const uint32_t delay_in_ms = 100;
+ const uint32_t read_count = ((8 * 1000) / delay_in_ms);
+ for (uint32_t count = 0; count < read_count; ++count) {
+ if (!gpio_get_value(GPIO_FP_PWR_BTN))
+ return false;
+
+ mdelay(delay_in_ms);
+ }
+ debug("is_mfg_mode_phy_req : detected mfg mode request\n");
+
+ return true;
+}
+
void ast_g5_intel_late_init(void)
{
char value[32];
@@ -420,6 +445,12 @@ void ast_g5_intel_late_init(void)
ast_scu_write(0, AST_SCU_SYS_CTRL);
update_bootargs_cmd("resetreason", value);
+
+ /* Update the special mode in bootargs */
+ if (is_mfg_mode_phy_req())
+ update_bootargs_cmd("special", "mfg");
+ else
+ update_bootargs_cmd("special", NULL);
}
static void pwm_init(void)
|
