1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
From b34fdedc21c98db698150d5014e12927a017b07f Mon Sep 17 00:00:00 2001
From: "Jason M. Bills" <jason.m.bills@linux.intel.com>
Date: Mon, 6 May 2019 14:18:27 -0700
Subject: [PATCH] Enable GPIOE0 and GPIOE2 pass-through by default
This change sets the gpio DT pinctrl default configuration to
enable GPIOE0 and GPIOE2 pass-through. Since this causes
pinctrl_get_select_default() to be called automatically for
the gpio driver to claim the GPIO pins in those groups, we
also need to call pinctrl_put() to release claim on the
pass-through GPIOs so they can be requested at runtime.
Tested:
Disabled pass-through in uboot and confirmed that after booting
Linux, pass-through is enabled and 'cat /sys/kernel/debug/pinctrl/
1e6e2000.syscon\:pinctrl-aspeed-g5-pinctrl/pinmux-pins' shows that
the pass-through GPIOs are UNCLAIMED.
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
---
arch/arm/boot/dts/aspeed-bmc-intel-ast2500.dts | 4 ++++
drivers/gpio/gpio-aspeed.c | 10 ++++++++++
2 files changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-ast2500.dts b/arch/arm/boot/dts/aspeed-bmc-intel-ast2500.dts
index 72bb1b3..ea1d9cd3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-ast2500.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-ast2500.dts
@@ -134,6 +134,10 @@
&gpio {
status = "okay";
+ /* Enable GPIOE0 and GPIOE2 pass-through by default */
+ pinctrl-names = "pass-through";
+ pinctrl-0 = <&pinctrl_gpie0_default
+ &pinctrl_gpie2_default>;
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "FM_BMC_BOARD_SKU_ID0_N","FM_BMC_BOARD_SKU_ID1_N","FM_BMC_BOARD_SKU_ID2_N","FM_BMC_BOARD_SKU_ID3_N","FM_BMC_BOARD_SKU_ID4_N","","","",
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 09e53c5..6165b44 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1140,6 +1140,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
{
const struct of_device_id *gpio_id;
struct aspeed_gpio *gpio;
+ struct pinctrl *pinctrl;
int rc, i, banks, err;
u32 ngpio;
@@ -1190,6 +1191,15 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
/*
+ * Select the pass-through pinctrl config to enable the pass-through
+ * mux for GPIOs E0 and E2. Then call pinctrl_put() to release claim
+ * of the GPIO pins, so they can be requested at runtime.
+ */
+ pinctrl = pinctrl_get_select(&pdev->dev, "pass-through");
+ if (!IS_ERR(pinctrl))
+ pinctrl_put(pinctrl);
+
+ /*
* Populate it with initial values read from the HW and switch
* all command sources to the ARM by default
*/
--
2.7.4
|