avsbus-control: Add system-specific scripts

The avsbus-control scripts differ between different machine
configurations. Rename the existing ones to witherspoon-* and
add the swift-* ones. Install the appropriate script depending
on the machine being built.

Tested: Built swift and witherspoon and verified that the scripts
        rootfs/usr/bin/ were the ones for the machine being built.

(From meta-ibm rev: d95d6afadd61c6ab8276736d719682775d7880d0)

Change-Id: Ib2ee438a0375de0d69dec7ae005118c8fdb46845
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

6 files changed, 66 insertions, 0 deletions

diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-disable.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-disable.sh
new file mode 100644
index 0000000000..1228ff9451
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-disable.sh
@@ -0,0 +1,18 @@
+#!/bin/sh

+# For each AVSBus attached rail go back to using VOUT_COMMAND (PMBus voltage)

+# instead of AVSBus and do *not* update VOUT_COMMAND with last voltage sent via

+# AVSBus. This should be run after power-down. This is platform specific

+# settings  that must be updated/removed if not Swift.

+

+i2cset -y 9 0x70 0x00 0x00 b    # VDD 0  - PAGE set

+i2cset -y 9 0x70 0x01 0x80 b    # VDD 0

+i2cset -y 9 0x71 0x00 0x01 b    # VCS 0  - PAGE set

+i2cset -y 9 0x71 0x01 0x80 b    # VCS 0

+i2cset -y 9 0x71 0x00 0x00 b    # VDN 0  - PAGE set

+i2cset -y 9 0x71 0x01 0x80 b    # VDN 0

+i2cset -y 10 0x70 0x00 0x00 b    # VDD 1  - PAGE set

+i2cset -y 10 0x70 0x01 0x80 b    # VDD 1

+i2cset -y 10 0x71 0x00 0x01 b    # VCS 1  - PAGE set

+i2cset -y 10 0x71 0x01 0x80 b    # VCS 1

+i2cset -y 10 0x71 0x00 0x00 b    # VDN 1  - PAGE set

+i2cset -y 10 0x71 0x01 0x80 b    # VDN 1

diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh
new file mode 100644
index 0000000000..d3840910ae
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+# For each AVSBus attached power rail set the default boot voltage and then
+# program the OPERATION register to switch to AVSBus mode and update default
+# start voltage to what was last programmed in VOUT_COMMAND. This should be run
+# before power-on. This is platform specific settings that must be
+# updated/removed if not Swift.
+
+i2cset -y 9 0x70 0x00 0x00 b    # VDD 0  - PAGE set
+i2cset -y 9 0x70 0x21 0xE6 0x00 i    # VDD 0  - Set default HW boot voltage to 0.9V
+i2cset -y 9 0x70 0x01 0xB0 b    # VDD 0
+i2cset -y 9 0x71 0x00 0x01 b    # VCS 0  - PAGE set
+i2cset -y 9 0x71 0x21 0x00 0x01 i    # VCS 0  - Set default HW boot voltage to 1.0V
+i2cset -y 9 0x71 0x01 0xB0 b    # VCS 0
+i2cset -y 9 0x71 0x00 0x00 b    # VDN 0  - PAGE set
+i2cset -y 9 0x71 0x21 0xCD 0x00 i    # VDN 0  - Set default HW boot voltage to 0.8V
+i2cset -y 9 0x71 0x01 0xB0 b    # VDN 0
+i2cset -y 10 0x70 0x00 0x00 b    # VDD 1  - PAGE set
+i2cset -y 10 0x70 0x21 0xE6 0x00 i    # VDD 1  - Set default HW boot voltage to 0.9V
+i2cset -y 10 0x70 0x01 0xB0 b    # VDD 1
+i2cset -y 10 0x71 0x00 0x01 b    # VCS 1  - PAGE set
+i2cset -y 10 0x71 0x21 0x00 0x01 i    # VCS 1  - Set default HW boot voltage to 1.0V
+i2cset -y 10 0x71 0x01 0xB0 b    # VCS 1
+i2cset -y 10 0x71 0x00 0x00 b    # VDN 1  - PAGE set
+i2cset -y 10 0x71 0x21 0xCD 0x00 i   # VDN 1  - Set default HW boot voltage to 0.8V
+i2cset -y 10 0x71 0x01 0xB0 b    # VDN 1
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-power-workarounds.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-power-workarounds.sh
new file mode 100644
index 0000000000..dc1f4803b6
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-power-workarounds.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+# This should be run before power-on and used to patch/update power specific
+# hardware settings. This is platform specific settings that must be
+# updated/removed if not Swift.
+
+########## Program TPS53915 FSW to desired frequency #########
+# FREQUENCY_CONFIG D3h, bits 2:0
+
+# AVDD, bus 3 addr 1D, set to 600khz
+# 600khz = 1,0,0
+i2cset -y 3 0x1D 0xD3 0x04 b
+
+# 3.3VA, bus 3 addr 1C, set to 600khz
+i2cset -y 3 0x1C 0xD3 0x04 b
+
+# 3.3VB, bus 3 addr 1B, set to 600khz
+i2cset -y 3 0x1B 0xD3 0x04 b
+
+# 5.0V, bus 3 addr 1A, set to 850khz
+# 850khz = 1,1,0
+i2cset -y 3 0x1A 0xD3 0x06 b
+########## END Program TPS53915 FSW to desired frequency #########
+
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/avsbus-disable.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-avsbus-disable.sh
index a158f159ef..a158f159ef 100644
--- a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/avsbus-disable.sh
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-avsbus-disable.sh
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/avsbus-enable.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-avsbus-enable.sh
index 6306c58b07..6306c58b07 100644
--- a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/avsbus-enable.sh
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-avsbus-enable.sh
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/power-workarounds.sh b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-power-workarounds.sh
index d405797311..d405797311 100644
--- a/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/power-workarounds.sh
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/witherspoon-power-workarounds.sh