poky: subtree update:9d1b332292..2834c2f853

Alex Stewart (3):
      opkg-utils: upgrade to version 0.4.5
      opkg: upgrade to version 0.4.5
      opkg: add QA check for openssl feed verification

Alexander Kanavin (37):
      virglrenderer: explicitly depend on libgbm
      elfutils: update 0.183 -> 0.185
      libcap: update 2.49 -> 2.50
      perl: split perl-cross into its own recipe
      perl-cross: 1.3.5 -> 1.3.6
      perl: update 5.32.1 -> 5.34.0
      libgcrypt: upgrade 1.9.2 -> 1.9.3
      erofs-utils: correct upstream version check
      m4: correct ptest failures
      ovmf: update 2021.02 -> 2021.05
      apt: update 2.2.3 -> 2.2.4
      util-linux: update 2.36.2 -> 2.37
      cross-canadian: correct the location of pkg-config files
      nettle: update 3.7.2 -> 3.7.3
      glib-2.0: update 2.68.2 -> 2.68.3
      meson: upgrade 0.58.0 -> 0.58.1
      ell: upgrade 0.40 -> 0.41
      erofs-utils: upgrade 1.2.1 -> 1.3
      grub: upgrade 2.04+2.06~rc1 -> 2.06
      gptfdisk: upgrade 1.0.7 -> 1.0.8
      connman: update 1.39 -> 1.40
      libksba: upgrade 1.5.1 -> 1.6.0
      libnss-mdns: upgrade 0.15 -> 0.15.1
      libwpe: upgrade 1.10.0 -> 1.10.1
      puzzles: upgrade to latest revision
      rng-tools: upgrade 6.12 -> 6.13
      stress-ng: upgrade 0.12.09 -> 0.12.10
      python3-magic: upgrade 0.4.23 -> 0.4.24
      sudo: upgrade 1.9.7 -> 1.9.7p1
      wpebackend-fdo: upgrade 1.8.4 -> 1.10.0
      xkeyboard-config: upgrade 2.32 -> 2.33
      bitbake.conf: enable debuginfod in native/nativesdk
      gdb-cross: enable debuginfod
      util-linux: backport a patch to address mkswap hangs
      selftest: do not hardcode /tmp/sdk
      glibc: do not enable memory tagging on aarch64 just yet
      mesa: enable gallium intel drivers when building for x86

Alexandre Belloni (1):
      runqemu: time the copy to tmpfs

Alexey Brodkin (3):
      gcc: Fixes for ARC
      gdb: Add native GDB support for ARC
      gcc: Apply multilib fix to ARC as well

Alistair Francis (3):
      recipes-bsp/opensbi: Disable FW_PIC
      recipes-bsp/u-boot: Allow deploying the u-boot DTB
      recipes-bsp/opensbi: Add support for specifying a device tree

Anders Wallin (1):
      coreutils: remove NOSTAT_LEAF_OPTIMIZATION

Andrea Adami (1):
      kernel.bbclass: fix do_sizecheck() comparison

Andreas Müller (19):
      mesa: upgrade 21.1.1 -> 21.1.2
      systemd: Add more ugly casts to fix build with musl
      alsa-lib: upgrade 1.2.4 -> 1.2.5
      alsa-plugins: upgrade 1.2.2 -> 1.2.5
      alsa-tools: upgrade 1.2.2 -> 1.2.5
      alsa-topology-conf: upgrade 1.2.4 -> 1.2.5
      alsa-ucm-conf: upgrade 1.2.4 -> 1.2.5
      alsa-utils(-scripts): upgrade 1.2.4 -> 1.2.5
      libinput: upgrade 1.17.3 -> 1.18.0
      xf86-input-libinput: upgrade 0.30.0 -> 1.0.1
      epiphany: upgrade 40.1 -> 40.2
      vala: upgrade 0.52.3 -> 0.52.4
      p11-kit: upgrade 0.23.22 -> 0.23.24
      xorgproto: upgrade 2021.4.99.1 -> 2021.4.99.2
      mpg123: 1.27.2 -> 1.28.0
      libx11: upgrade 1.7.1 -> 1.7.2
      libx11: remove CPPFLAGS_FOR_BUILD += "-D_GNU_SOURCE"
      libpcap: upgrade 1.10.0 -> 1.10.1
      mesa: upgrade 21.1.2 -> 21.1.3

Bruce Ashfield (10):
      linux-yocto/5.10: update to v5.10.42
      linux-yocto/5.10: temporarily revert aufs
      linux-yocto-dev: base AUTOREV on specified version
      linux-yocto/5.4: update to v5.4.124
      linux-yocto/5.10: restore aufs
      linux-yocto/5.10: update to v5.10.43
      linux-yocto/5.4: update to v5.4.125
      linux-yocto/5.10: cgroup1: fix leaked context root causing sporadic NULL deref in LTP
      btrfs-tools: include linux/const.h to fix build with 5.12+ headers
      bsps/5.10: update to v5.10.43

Changqing Li (1):
      libjpeg-turbo: fix do_compile error on arm

Chris Laplante (1):
      bitbake: build: warn on setting noexec/nostamp/fakeroot flag to any value besides '1'

Daniel Wagenknecht (5):
      ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
      ref-manual: variables: document IMGDEPLOYDIR
      ref-manual: migration-2.2: add note about IMGDEPLOYDIR
      ref-manual: variables: fixup example in IMAGE_CMD
      ref-manual: variables: fixup class reference in IMAGE_MANIFEST

Joe Slater (1):
      tcf-agent: change license to EPL/EDL

Joshua Watt (2):
      classes/buildhistory: Add option to strip path prefix
      classes/reproducible_build: Use atomic rename for SDE file

Justin Bronder (1):
      populate_sdk_ext: copy BBMULTICONFIG files

Kai Kang (1):
      valgrind: fix a typo

Khem Raj (14):
      harfbuzz: Fix unused-variable warning
      arch-armv4: Allow -march=armv4
      ffmpeg: Link in libatomic on riscv32
      libssp-nonshared: Use a different implementation for __stack_chk_fail
      qemuriscv: Enable 4 core emulation
      gcompat: Add recipe
      musl: Do not package glibc loader
      musl: Set UPSTREAM_CHECK_COMMITS
      Revert "libgcc-initial: Do not build fp128 to decimal ppc functions"
      qemu: Provide float128 via hwcaps2 on ppc64le
      linuxloader: Be aware of riscv32 ldso
      linuxloader.bbclass: Add entry for ppc64 LE glibc loader
      gcompat: Create symlinks to glibc ldso locations
      sdk: Enable do_populate_sdk with multilibs

Luca Boccassi (1):
      systemd: install new sysext tool via systemd-extra-utils

Marcus Comstedt (1):
      conf/machine-sdk: Add ppc64 SDK machine

Matt Spencer (1):
      systemd-conf: Prevent systemd-network from managing veth interfaces

Michael Halstead (1):
      releases: update to include 3.1.8

Michael Opdenacker (12):
      bitbake: docs: Add BB_HASHSERVE definition to glossary
      bitbake: doc: bitbake-user-manual: fix erroneous statement in glossary intro
      manuals: fix epub export warnings
      ref-manual: move migration guides to separate document
      releases: clarify supported and outdated releases
      releases: put release number after "Release Series"
      sdk-manual: fix broken references
      migration guides: remove index reference to BB_SETSCENE_VERIFY_FUNCTION2
      manuals: fix issues related to trailing dots
      sdk-manual: add missing quoting around "devtool upgrade"
      sdk-manual: fix wrong word
      sdk-manual: add missing index references

Ming Liu (2):
      u-boot-tools: fix a mkimage signature issue
      uboot-sign.bbclass: fix some install commands

Mingli Yu (2):
      sysstat: make the service start automatically
      boost: fix wrong type for mutex in regex v5

Nicolas Dechesne (3):
      index: remove the link/section to 'mega manual' from main page
      index: remove links to releases manual and index
      index: split releases manuals and indexes into two sections in the tree

Paul Barker (2):
      bitbake: asyncrpc: Add ping method
      bitbake: asyncrpc: Reduce verbosity

Quentin Schulz (6):
      docs: ref-manual: migration-3.0: remove reference to non-existing BB_SETSCENE_VERIFY_FUNCTION2
      docs: ref-manual: variables: add missing links to terms glossary
      bitbake: doc: user-manual: remove mentions to BBVERSIONS
      bitbake: doc: user-manual: ref-manual: remove mentions to BB_SETSCENE_VERIFY_FUNCTION2
      documentation: Makefile: turn warnings into errors by default
      docs: replace ``FOO`` by :term:`FOO` where possible

Richard Purdie (11):
      lttng-tools: upgrade 2.12.3 -> 2.12.4
      qemurunner: Try to ensure mmap'd libs are paged in
      qemurunner: Increase startup timeout 120 -> 300
      build-appliance-image: Update to master head revision
      test-manual: add initial reproducible builds documentation
      test-manual: Add initial YP Compatible documentation
      README: Tweak as the website isn't really new now
      README: Move to using markdown as the format
      perf: Use python3targetconfig to ensure we use target libraries
      ltp: Reinstate 'hanging' tests for evaluation
      README.poky: Formatting and content cleanup

Richard Weinberger (1):
      Document erofs filesystem targets

Robert P. J. Day (2):
      ref-manual: add SRCTREECOVEREDTASKS to variable glossary
      ref-manual: add glossary entry for NON_MULTILIB_RECIPES

Ross Burton (11):
      mx: remove from Openembedded Core
      core-image-weston: remove Clutter examples
      Remove Clutter and Cogl
      oeqa: remove Clutter usage
      meta-poky: remove clutter references
      Remove Clutter references
      gcc: enable branch protection by standard
      image_types: add zsync conversions
      avahi: apply fix for CVE-2021-3468
      qemu: fix virtio vhost-user-gpu CVEs
      gcc: replace gdb helper install revert with the upstream fix

Sakib Sajal (3):
      oeqa/core/target/qemu.py: display contents of dumped files
      oe-time-dd-test.sh: improve output formatting
      oe-time-dd-test.sh: add iostat command

Saul Wold (1):
      qemurunner: add second qmp port

Scott Weaver (1):
      bitbake: fetch2: add check for empty SRC_URI hash string

Tim Orling (8):
      maintainers.inc: update email address
      python3-scons: upgrade 3.1.2 -> 4.1.0; simplify
      python3-hypothesis: upgrade 6.13.7 -> 6.13.14
      at-spi2-core: upgrade 2.40.1 -> 2.40.2
      python3-importlib-metadata: upgrade 4.4.0 -> 4.5.0
      python3-manifest: add statistics subpackage
      python3-hypothesis: upgrade 6.13.14 -> 6.14.0
      python3: skip tests requiring tools-sdk

Tony Battersby (1):
      glibc: fix path to place zdump in the tzcode package

Tony Tascioglu (3):
      valgrind: Improve non-deterministic ptest reliability
      valgrind: remove buggy ptest from arm64
      valgrind: Actually install list of non-deterministic ptests

hongxu (1):
      nativesdk-libdnf: fix installed and not shipped files

wangmy (21):
      cmake: upgrade 3.20.2 -> 3.20.3
      mtools: upgrade 4.0.27 -> 4.0.29
      python3-magic: upgrade 0.4.22 -> 0.4.23
      less: upgrade 586 -> 589
      python3-libarchive-c: upgrade 3.0 -> 3.1
      diffoscope: upgrade 175 -> 177
      dtc: upgrade 1.6.0 -> 1.6.1
      git: upgrade 2.31.1 -> 2.32.0
      gnutls: upgrade 3.7.1 -> 3.7.2
      go: upgrade 1.16.4 -> 1.16.5
      less: upgrade 589 -> 590
      ethtool: upgrade 5.10 -> 5.12
      m4: upgrade 1.4.18 -> 1.4.19
      alsa-lib: upgrade 1.2.5 -> 1.2.5.1
      alsa-utils: upgrade 1.2.5 -> 1.2.5.1
      alsa-topology-conf: upgrade 1.2.5 -> 1.2.5.1
      alsa-ucm-conf: upgrade 1.2.5 -> 1.2.5.1
      blktrace: upgrade 1.2.0 -> 1.3.0
      enchant2: upgrade 2.2.15 -> 2.3.0
      librepo: upgrade 1.14.0 -> 1.14.1
      createrepo-c: upgrade 0.17.2 -> 0.17.3

zangrc (1):
      python3-pycairo: upgrade 1.20.0 -> 1.20.1

zhengruoqin (6):
      python3-importlib-metadata: upgrade 4.3.0 -> 4.4.0
      libogg: upgrade 1.3.4 -> 1.3.5
      liburcu: upgrade 0.12.2 -> 0.13.0
      libcomps: upgrade 0.1.16 -> 0.1.17
      python3-dbusmock: upgrade 0.23.0 -> 0.23.1
      nfs-utils: upgrade 2.5.3 -> 2.5.4

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Iac124e214336beb9cab7fb3b67a6968d4e34d06f

1 files changed, 26 insertions, 26 deletions

diff --git a/poky/documentation/kernel-dev/common.rst b/poky/documentation/kernel-dev/common.rst
index f64cbab56c..de62df5b1f 100644
--- a/poky/documentation/kernel-dev/common.rst
+++ b/poky/documentation/kernel-dev/common.rst
@@ -70,7 +70,7 @@ section:
    :term:`MACHINE` variable is set to
    "qemux86-64", which is fine if you are building for the QEMU emulator
    in 64-bit mode. However, if you are not, you need to set the
-   ``MACHINE`` variable appropriately in your ``conf/local.conf`` file
+   :term:`MACHINE` variable appropriately in your ``conf/local.conf`` file
    found in the
    :term:`Build Directory` (i.e.
    ``poky/build`` in this example).
@@ -248,7 +248,7 @@ section:
    :term:`MACHINE` variable is set to
    "qemux86-64", which is fine if you are building for the QEMU emulator
    in 64-bit mode. However, if you are not, you need to set the
-   ``MACHINE`` variable appropriately in your ``conf/local.conf`` file
+   :term:`MACHINE` variable appropriately in your ``conf/local.conf`` file
    found in the
    :term:`Build Directory` (i.e.
    ``poky/build`` in this example).
@@ -474,7 +474,7 @@ variable as follows::
 The path ``${``\ :term:`THISDIR`\ ``}/${``\ :term:`PN`\ ``}``
 expands to "linux-yocto" in the current directory for this example. If
 you add any new files that modify the kernel recipe and you have
-extended ``FILESPATH`` as described above, you must place the files in
+extended :term:`FILESPATH` as described above, you must place the files in
 your layer in the following area::
 
    your-layer/recipes-kernel/linux/linux-yocto/
@@ -553,7 +553,7 @@ the append file.
 
 For example, suppose you had some configuration options in a file called
 ``network_configs.cfg``. You can place that file inside a directory
-named ``linux-yocto`` and then add a ``SRC_URI`` statement such as the
+named ``linux-yocto`` and then add a :term:`SRC_URI` statement such as the
 following to the append file. When the OpenEmbedded build system builds
 the kernel, the configuration options are picked up and applied.
 ::
@@ -563,7 +563,7 @@ the kernel, the configuration options are picked up and applied.
 To group related configurations into multiple files, you perform a
 similar procedure. Here is an example that groups separate
 configurations specifically for Ethernet and graphics into their own
-files and adds the configurations by using a ``SRC_URI`` statement like
+files and adds the configurations by using a :term:`SRC_URI` statement like
 the following in your append file::
 
    SRC_URI += "file://myconfig.cfg \
@@ -643,7 +643,7 @@ following lines to the linux-yocto ``.bbappend`` file in your layer::
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
    SRC_URI += "file://defconfig"
 
-The ``SRC_URI`` tells the build system how to search
+The :term:`SRC_URI` tells the build system how to search
 for the file, while the
 :term:`FILESEXTRAPATHS`
 extends the :term:`FILESPATH`
@@ -684,7 +684,7 @@ with the following content (without indentation)::
    CONFIG_SERIAL_CORE_CONSOLE=y
 
 Next, include this
-configuration fragment and extend the ``FILESPATH`` variable in your
+configuration fragment and extend the :term:`FILESPATH` variable in your
 ``.bbappend`` file::
 
    FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
@@ -722,7 +722,7 @@ form::
    KBUILD_DEFCONFIG_KMACHINE ?= "defconfig_file"
 
 Here is an example
-that assigns the ``KBUILD_DEFCONFIG`` variable based on "raspberrypi2"
+that assigns the :term:`KBUILD_DEFCONFIG` variable based on "raspberrypi2"
 and provides the path to the "in-tree" ``defconfig`` file to be used for
 a Raspberry Pi 2, which is based on the Broadcom 2708/2709 chipset::
 
@@ -734,7 +734,7 @@ Aside from modifying your kernel recipe and providing your own
 a kernel's ``linux-``\ `machine`\ ``.inc`` file). In other words, if the
 build system detects a statement that identifies an "out-of-tree"
 ``defconfig`` file, that statement will override your
-``KBUILD_DEFCONFIG`` variable.
+:term:`KBUILD_DEFCONFIG` variable.
 
 See the
 :term:`KBUILD_DEFCONFIG`
@@ -1349,10 +1349,10 @@ be picked up and applied when the kernel is built::
    SRC_URI += "file://myconfig.cfg"
 
 As mentioned earlier, you can group related configurations into multiple
-files and name them all in the ``SRC_URI`` statement as well. For
+files and name them all in the :term:`SRC_URI` statement as well. For
 example, you could group separate configurations specifically for
 Ethernet and graphics into their own files and add those by using a
-``SRC_URI`` statement like the following in your append file::
+:term:`SRC_URI` statement like the following in your append file::
 
    SRC_URI += "file://myconfig.cfg \
                file://eth.cfg \
@@ -1628,11 +1628,11 @@ Here are some basic steps you can use to work with your own sources:
    appropriate for your project:
 
    -  :term:`SRC_URI`: The
-      ``SRC_URI`` should specify a Git repository that uses one of the
+      :term:`SRC_URI` should specify a Git repository that uses one of the
       supported Git fetcher protocols (i.e. ``file``, ``git``, ``http``,
-      and so forth). The ``SRC_URI`` variable should also specify either
+      and so forth). The :term:`SRC_URI` variable should also specify either
       a ``defconfig`` file or some configuration fragment files. The
-      skeleton recipe provides an example ``SRC_URI`` as a syntax
+      skeleton recipe provides an example :term:`SRC_URI` as a syntax
       reference.
 
    -  :term:`LINUX_VERSION`:
@@ -1650,16 +1650,16 @@ Here are some basic steps you can use to work with your own sources:
       indicate to the OpenEmbedded build system that the recipe has
       changed.
 
-   -  :term:`PV`: The default ``PV``
+   -  :term:`PV`: The default :term:`PV`
       assignment is typically adequate. It combines the
-      ``LINUX_VERSION`` with the Source Control Manager (SCM) revision
+      :term:`LINUX_VERSION` with the Source Control Manager (SCM) revision
       as derived from the :term:`SRCPV`
       variable. The combined results are a string with the following
       form::
 
          3.19.11+git1+68a635bf8dfb64b02263c1ac80c948647cc76d5f_1+218bd8d2022b9852c60d32f0d770931e3cf343e2
 
-      While lengthy, the extra verbosity in ``PV`` helps ensure you are
+      While lengthy, the extra verbosity in :term:`PV` helps ensure you are
       using the exact sources from which you intend to build.
 
    -  :term:`COMPATIBLE_MACHINE`:
@@ -1773,7 +1773,7 @@ information to build modules. If your module ``Makefile`` uses a
 different variable, you might want to override the
 :ref:`ref-tasks-compile` step, or
 create a patch to the ``Makefile`` to work with the more typical
-``KERNEL_SRC`` or ``KERNEL_PATH`` variables.
+:term:`KERNEL_SRC` or :term:`KERNEL_PATH` variables.
 
 After you have prepared your recipe, you will likely want to include the
 module in your images. To do this, see the documentation for the
@@ -1886,23 +1886,23 @@ build stops. Kernel features are the last elements processed for
 configuring and patching the kernel. Therefore, adding features in this
 manner is a way to enforce specific features are present and enabled
 without needing to do a full audit of any other layer's additions to the
-``SRC_URI`` statement.
+:term:`SRC_URI` statement.
 
 You add a kernel feature by providing the feature as part of the
-``KERNEL_FEATURES`` variable and by providing the path to the feature's
+:term:`KERNEL_FEATURES` variable and by providing the path to the feature's
 ``.scc`` file, which is relative to the root of the kernel Metadata. The
 OpenEmbedded build system searches all forms of kernel Metadata on the
-``SRC_URI`` statement regardless of whether the Metadata is in the
+:term:`SRC_URI` statement regardless of whether the Metadata is in the
 "kernel-cache", system kernel Metadata, or a recipe-space Metadata (i.e.
 part of the kernel recipe). See the
 ":ref:`kernel-dev/advanced:kernel metadata location`" section for
 additional information.
 
-When you specify the feature's ``.scc`` file on the ``SRC_URI``
+When you specify the feature's ``.scc`` file on the :term:`SRC_URI`
 statement, the OpenEmbedded build system adds the directory of that
 ``.scc`` file along with all its subdirectories to the kernel feature
 search path. Because subdirectories are searched, you can reference a
-single ``.scc`` file in the ``SRC_URI`` statement to reference multiple
+single ``.scc`` file in the :term:`SRC_URI` statement to reference multiple
 kernel features.
 
 Consider the following example that adds the "test.scc" feature to the
@@ -1910,7 +1910,7 @@ build.
 
 1. *Create the Feature File:* Create a ``.scc`` file and locate it just
    as you would any other patch file, ``.cfg`` file, or fetcher item you
-   specify in the ``SRC_URI`` statement.
+   specify in the :term:`SRC_URI` statement.
 
    .. note::
 
@@ -1937,7 +1937,7 @@ build.
    a similarly named configuration fragment file ``test.cfg``.
 
 2. *Add the Feature File to SRC_URI:* Add the ``.scc`` file to the
-   recipe's ``SRC_URI`` statement::
+   recipe's :term:`SRC_URI` statement::
 
       SRC_URI_append = " file://test.scc"
 
@@ -1945,7 +1945,7 @@ build.
    appended to the existing path.
 
 3. *Specify the Feature as a Kernel Feature:* Use the
-   ``KERNEL_FEATURES`` statement to specify the feature as a kernel
+   :term:`KERNEL_FEATURES` statement to specify the feature as a kernel
    feature::
 
       KERNEL_FEATURES_append = " test.scc"