diff options
author | Andrew Geissler <geissonator@yahoo.com> | 2021-06-25 22:25:14 +0300 |
---|---|---|
committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | 2021-06-28 15:35:59 +0300 |
commit | 0903674e2d7bafcf89cf75adbcf34cac5ce4b938 (patch) | |
tree | c46ac7b80c4e559224df62f95931ed8a2ab51435 /poky/meta-yocto-bsp/README.hardware | |
parent | a1a6aefba3ae965f2447b102663b2a6a40aa968a (diff) | |
download | openbmc-0903674e2d7bafcf89cf75adbcf34cac5ce4b938.tar.xz |
poky: subtree update:9d1b332292..2834c2f853
Alex Stewart (3):
opkg-utils: upgrade to version 0.4.5
opkg: upgrade to version 0.4.5
opkg: add QA check for openssl feed verification
Alexander Kanavin (37):
virglrenderer: explicitly depend on libgbm
elfutils: update 0.183 -> 0.185
libcap: update 2.49 -> 2.50
perl: split perl-cross into its own recipe
perl-cross: 1.3.5 -> 1.3.6
perl: update 5.32.1 -> 5.34.0
libgcrypt: upgrade 1.9.2 -> 1.9.3
erofs-utils: correct upstream version check
m4: correct ptest failures
ovmf: update 2021.02 -> 2021.05
apt: update 2.2.3 -> 2.2.4
util-linux: update 2.36.2 -> 2.37
cross-canadian: correct the location of pkg-config files
nettle: update 3.7.2 -> 3.7.3
glib-2.0: update 2.68.2 -> 2.68.3
meson: upgrade 0.58.0 -> 0.58.1
ell: upgrade 0.40 -> 0.41
erofs-utils: upgrade 1.2.1 -> 1.3
grub: upgrade 2.04+2.06~rc1 -> 2.06
gptfdisk: upgrade 1.0.7 -> 1.0.8
connman: update 1.39 -> 1.40
libksba: upgrade 1.5.1 -> 1.6.0
libnss-mdns: upgrade 0.15 -> 0.15.1
libwpe: upgrade 1.10.0 -> 1.10.1
puzzles: upgrade to latest revision
rng-tools: upgrade 6.12 -> 6.13
stress-ng: upgrade 0.12.09 -> 0.12.10
python3-magic: upgrade 0.4.23 -> 0.4.24
sudo: upgrade 1.9.7 -> 1.9.7p1
wpebackend-fdo: upgrade 1.8.4 -> 1.10.0
xkeyboard-config: upgrade 2.32 -> 2.33
bitbake.conf: enable debuginfod in native/nativesdk
gdb-cross: enable debuginfod
util-linux: backport a patch to address mkswap hangs
selftest: do not hardcode /tmp/sdk
glibc: do not enable memory tagging on aarch64 just yet
mesa: enable gallium intel drivers when building for x86
Alexandre Belloni (1):
runqemu: time the copy to tmpfs
Alexey Brodkin (3):
gcc: Fixes for ARC
gdb: Add native GDB support for ARC
gcc: Apply multilib fix to ARC as well
Alistair Francis (3):
recipes-bsp/opensbi: Disable FW_PIC
recipes-bsp/u-boot: Allow deploying the u-boot DTB
recipes-bsp/opensbi: Add support for specifying a device tree
Anders Wallin (1):
coreutils: remove NOSTAT_LEAF_OPTIMIZATION
Andrea Adami (1):
kernel.bbclass: fix do_sizecheck() comparison
Andreas Müller (19):
mesa: upgrade 21.1.1 -> 21.1.2
systemd: Add more ugly casts to fix build with musl
alsa-lib: upgrade 1.2.4 -> 1.2.5
alsa-plugins: upgrade 1.2.2 -> 1.2.5
alsa-tools: upgrade 1.2.2 -> 1.2.5
alsa-topology-conf: upgrade 1.2.4 -> 1.2.5
alsa-ucm-conf: upgrade 1.2.4 -> 1.2.5
alsa-utils(-scripts): upgrade 1.2.4 -> 1.2.5
libinput: upgrade 1.17.3 -> 1.18.0
xf86-input-libinput: upgrade 0.30.0 -> 1.0.1
epiphany: upgrade 40.1 -> 40.2
vala: upgrade 0.52.3 -> 0.52.4
p11-kit: upgrade 0.23.22 -> 0.23.24
xorgproto: upgrade 2021.4.99.1 -> 2021.4.99.2
mpg123: 1.27.2 -> 1.28.0
libx11: upgrade 1.7.1 -> 1.7.2
libx11: remove CPPFLAGS_FOR_BUILD += "-D_GNU_SOURCE"
libpcap: upgrade 1.10.0 -> 1.10.1
mesa: upgrade 21.1.2 -> 21.1.3
Bruce Ashfield (10):
linux-yocto/5.10: update to v5.10.42
linux-yocto/5.10: temporarily revert aufs
linux-yocto-dev: base AUTOREV on specified version
linux-yocto/5.4: update to v5.4.124
linux-yocto/5.10: restore aufs
linux-yocto/5.10: update to v5.10.43
linux-yocto/5.4: update to v5.4.125
linux-yocto/5.10: cgroup1: fix leaked context root causing sporadic NULL deref in LTP
btrfs-tools: include linux/const.h to fix build with 5.12+ headers
bsps/5.10: update to v5.10.43
Changqing Li (1):
libjpeg-turbo: fix do_compile error on arm
Chris Laplante (1):
bitbake: build: warn on setting noexec/nostamp/fakeroot flag to any value besides '1'
Daniel Wagenknecht (5):
ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
ref-manual: variables: document IMGDEPLOYDIR
ref-manual: migration-2.2: add note about IMGDEPLOYDIR
ref-manual: variables: fixup example in IMAGE_CMD
ref-manual: variables: fixup class reference in IMAGE_MANIFEST
Joe Slater (1):
tcf-agent: change license to EPL/EDL
Joshua Watt (2):
classes/buildhistory: Add option to strip path prefix
classes/reproducible_build: Use atomic rename for SDE file
Justin Bronder (1):
populate_sdk_ext: copy BBMULTICONFIG files
Kai Kang (1):
valgrind: fix a typo
Khem Raj (14):
harfbuzz: Fix unused-variable warning
arch-armv4: Allow -march=armv4
ffmpeg: Link in libatomic on riscv32
libssp-nonshared: Use a different implementation for __stack_chk_fail
qemuriscv: Enable 4 core emulation
gcompat: Add recipe
musl: Do not package glibc loader
musl: Set UPSTREAM_CHECK_COMMITS
Revert "libgcc-initial: Do not build fp128 to decimal ppc functions"
qemu: Provide float128 via hwcaps2 on ppc64le
linuxloader: Be aware of riscv32 ldso
linuxloader.bbclass: Add entry for ppc64 LE glibc loader
gcompat: Create symlinks to glibc ldso locations
sdk: Enable do_populate_sdk with multilibs
Luca Boccassi (1):
systemd: install new sysext tool via systemd-extra-utils
Marcus Comstedt (1):
conf/machine-sdk: Add ppc64 SDK machine
Matt Spencer (1):
systemd-conf: Prevent systemd-network from managing veth interfaces
Michael Halstead (1):
releases: update to include 3.1.8
Michael Opdenacker (12):
bitbake: docs: Add BB_HASHSERVE definition to glossary
bitbake: doc: bitbake-user-manual: fix erroneous statement in glossary intro
manuals: fix epub export warnings
ref-manual: move migration guides to separate document
releases: clarify supported and outdated releases
releases: put release number after "Release Series"
sdk-manual: fix broken references
migration guides: remove index reference to BB_SETSCENE_VERIFY_FUNCTION2
manuals: fix issues related to trailing dots
sdk-manual: add missing quoting around "devtool upgrade"
sdk-manual: fix wrong word
sdk-manual: add missing index references
Ming Liu (2):
u-boot-tools: fix a mkimage signature issue
uboot-sign.bbclass: fix some install commands
Mingli Yu (2):
sysstat: make the service start automatically
boost: fix wrong type for mutex in regex v5
Nicolas Dechesne (3):
index: remove the link/section to 'mega manual' from main page
index: remove links to releases manual and index
index: split releases manuals and indexes into two sections in the tree
Paul Barker (2):
bitbake: asyncrpc: Add ping method
bitbake: asyncrpc: Reduce verbosity
Quentin Schulz (6):
docs: ref-manual: migration-3.0: remove reference to non-existing BB_SETSCENE_VERIFY_FUNCTION2
docs: ref-manual: variables: add missing links to terms glossary
bitbake: doc: user-manual: remove mentions to BBVERSIONS
bitbake: doc: user-manual: ref-manual: remove mentions to BB_SETSCENE_VERIFY_FUNCTION2
documentation: Makefile: turn warnings into errors by default
docs: replace ``FOO`` by :term:`FOO` where possible
Richard Purdie (11):
lttng-tools: upgrade 2.12.3 -> 2.12.4
qemurunner: Try to ensure mmap'd libs are paged in
qemurunner: Increase startup timeout 120 -> 300
build-appliance-image: Update to master head revision
test-manual: add initial reproducible builds documentation
test-manual: Add initial YP Compatible documentation
README: Tweak as the website isn't really new now
README: Move to using markdown as the format
perf: Use python3targetconfig to ensure we use target libraries
ltp: Reinstate 'hanging' tests for evaluation
README.poky: Formatting and content cleanup
Richard Weinberger (1):
Document erofs filesystem targets
Robert P. J. Day (2):
ref-manual: add SRCTREECOVEREDTASKS to variable glossary
ref-manual: add glossary entry for NON_MULTILIB_RECIPES
Ross Burton (11):
mx: remove from Openembedded Core
core-image-weston: remove Clutter examples
Remove Clutter and Cogl
oeqa: remove Clutter usage
meta-poky: remove clutter references
Remove Clutter references
gcc: enable branch protection by standard
image_types: add zsync conversions
avahi: apply fix for CVE-2021-3468
qemu: fix virtio vhost-user-gpu CVEs
gcc: replace gdb helper install revert with the upstream fix
Sakib Sajal (3):
oeqa/core/target/qemu.py: display contents of dumped files
oe-time-dd-test.sh: improve output formatting
oe-time-dd-test.sh: add iostat command
Saul Wold (1):
qemurunner: add second qmp port
Scott Weaver (1):
bitbake: fetch2: add check for empty SRC_URI hash string
Tim Orling (8):
maintainers.inc: update email address
python3-scons: upgrade 3.1.2 -> 4.1.0; simplify
python3-hypothesis: upgrade 6.13.7 -> 6.13.14
at-spi2-core: upgrade 2.40.1 -> 2.40.2
python3-importlib-metadata: upgrade 4.4.0 -> 4.5.0
python3-manifest: add statistics subpackage
python3-hypothesis: upgrade 6.13.14 -> 6.14.0
python3: skip tests requiring tools-sdk
Tony Battersby (1):
glibc: fix path to place zdump in the tzcode package
Tony Tascioglu (3):
valgrind: Improve non-deterministic ptest reliability
valgrind: remove buggy ptest from arm64
valgrind: Actually install list of non-deterministic ptests
hongxu (1):
nativesdk-libdnf: fix installed and not shipped files
wangmy (21):
cmake: upgrade 3.20.2 -> 3.20.3
mtools: upgrade 4.0.27 -> 4.0.29
python3-magic: upgrade 0.4.22 -> 0.4.23
less: upgrade 586 -> 589
python3-libarchive-c: upgrade 3.0 -> 3.1
diffoscope: upgrade 175 -> 177
dtc: upgrade 1.6.0 -> 1.6.1
git: upgrade 2.31.1 -> 2.32.0
gnutls: upgrade 3.7.1 -> 3.7.2
go: upgrade 1.16.4 -> 1.16.5
less: upgrade 589 -> 590
ethtool: upgrade 5.10 -> 5.12
m4: upgrade 1.4.18 -> 1.4.19
alsa-lib: upgrade 1.2.5 -> 1.2.5.1
alsa-utils: upgrade 1.2.5 -> 1.2.5.1
alsa-topology-conf: upgrade 1.2.5 -> 1.2.5.1
alsa-ucm-conf: upgrade 1.2.5 -> 1.2.5.1
blktrace: upgrade 1.2.0 -> 1.3.0
enchant2: upgrade 2.2.15 -> 2.3.0
librepo: upgrade 1.14.0 -> 1.14.1
createrepo-c: upgrade 0.17.2 -> 0.17.3
zangrc (1):
python3-pycairo: upgrade 1.20.0 -> 1.20.1
zhengruoqin (6):
python3-importlib-metadata: upgrade 4.3.0 -> 4.4.0
libogg: upgrade 1.3.4 -> 1.3.5
liburcu: upgrade 0.12.2 -> 0.13.0
libcomps: upgrade 0.1.16 -> 0.1.17
python3-dbusmock: upgrade 0.23.0 -> 0.23.1
nfs-utils: upgrade 2.5.3 -> 2.5.4
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Iac124e214336beb9cab7fb3b67a6968d4e34d06f
Diffstat (limited to 'poky/meta-yocto-bsp/README.hardware')
-rw-r--r-- | poky/meta-yocto-bsp/README.hardware | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/poky/meta-yocto-bsp/README.hardware b/poky/meta-yocto-bsp/README.hardware deleted file mode 100644 index 9803af006a..0000000000 --- a/poky/meta-yocto-bsp/README.hardware +++ /dev/null @@ -1,265 +0,0 @@ - Yocto Project Hardware Reference BSPs README - ============================================ - -This file gives details about using the Yocto Project hardware reference BSPs. -The machines supported can be seen in the conf/machine/ directory and are listed -below. There is one per supported hardware architecture and these are primarily -used to validate that the Yocto Project works on the hardware arctectures of -those machines. - -If you are in doubt about using Poky/OpenEmbedded/Yocto Project with your hardware, -consult the documentation for your board/device. - -Support for additional devices is normally added by adding BSP layers to your -configuration. For more information please see the Yocto Board Support Package -(BSP) Developer's Guide - documentation source is in documentation/bspguide or -download the PDF from: - - http://yoctoproject.org/documentation - -Note that these reference BSPs use the linux-yocto kernel and in general don't -pull in binary module support for the platforms. This means some device functionality -may be limited compared to a 'full' BSP which may be available. - - -Hardware Reference Boards -========================= - -The following boards are supported by the meta-yocto-bsp layer: - - * Texas Instruments Beaglebone (beaglebone-yocto) - * Ubiquiti Networks EdgeRouter Lite (edgerouter) - * General IA platforms (genericx86 and genericx86-64) - -For more information see the board's section below. The appropriate MACHINE -variable value corresponding to the board is given in brackets. - -Reference Board Maintenance -=========================== - -Send pull requests, patches, comments or questions about meta-yocto-bsps to poky@yoctoproject.org - -Maintainers: Kevin Hao <kexin.hao@windriver.com> - Bruce Ashfield <bruce.ashfield@windriver.com> - -Consumer Devices -================ - -The following consumer devices are supported by the meta-yocto-bsp layer: - - * Intel x86 based PCs and devices (genericx86) - * Ubiquiti Networks EdgeRouter Lite (edgerouter) - -For more information see the device's section below. The appropriate MACHINE -variable value corresponding to the device is given in brackets. - - - - Specific Hardware Documentation - =============================== - - -Intel x86 based PCs and devices (genericx86*) -============================================= - -The genericx86 and genericx86-64 MACHINE are tested on the following platforms: - -Intel Xeon/Core i-Series: - + Intel NUC5 Series - ix-52xx Series SOC (Broadwell) - + Intel NUC6 Series - ix-62xx Series SOC (Skylake) - + Intel Shumway Xeon Server - -Intel Atom platforms: - + MinnowBoard MAX - E3825 SOC (Bay Trail) - + MinnowBoard MAX - Turbot (ADI Engineering) - E3826 SOC (Bay Trail) - - These boards can be either 32bot or 64bit modes depending on firmware - - See minnowboard.org for details - + Intel Braswell SOC - -and is likely to work on many unlisted Atom/Core/Xeon based devices. The MACHINE -type supports ethernet, wifi, sound, and Intel/vesa graphics by default in -addition to common PC input devices, busses, and so on. - -Depending on the device, it can boot from a traditional hard-disk, a USB device, -or over the network. Writing generated images to physical media is -straightforward with a caveat for USB devices. The following examples assume the -target boot device is /dev/sdb, be sure to verify this and use the correct -device as the following commands are run as root and are not reversable. - -USB Device: - 1. Build a live image. This image type consists of a simple filesystem - without a partition table, which is suitable for USB keys, and with the - default setup for the genericx86 machine, this image type is built - automatically for any image you build. For example: - - $ bitbake core-image-minimal - - 2. Use the "dd" utility to write the image to the raw block device. For - example: - - # dd if=core-image-minimal-genericx86.hddimg of=/dev/sdb - - If the device fails to boot with "Boot error" displayed, or apparently - stops just after the SYSLINUX version banner, it is likely the BIOS cannot - understand the physical layout of the disk (or rather it expects a - particular layout and cannot handle anything else). There are two possible - solutions to this problem: - - 1. Change the BIOS USB Device setting to HDD mode. The label will vary by - device, but the idea is to force BIOS to read the Cylinder/Head/Sector - geometry from the device. - - 2. Use a ".wic" image with an EFI partition - - a) With a default grub-efi bootloader: - # dd if=core-image-minimal-genericx86-64.wic of=/dev/sdb - - b) Use systemd-boot instead - - Build an image with EFI_PROVIDER="systemd-boot" then use the above - dd command to write the image to a USB stick. - - -Texas Instruments Beaglebone (beaglebone-yocto) -=============================================== - -The Beaglebone is an ARM Cortex-A8 development board with USB, Ethernet, 2D/3D -accelerated graphics, audio, serial, JTAG, and SD/MMC. The Black adds a faster -CPU, more RAM, eMMC flash and a micro HDMI port. The beaglebone MACHINE is -tested on the following platforms: - - o Beaglebone Black A6 - o Beaglebone A6 (the original "White" model) - -The Beaglebone Black has eMMC, while the White does not. Pressing the USER/BOOT -button when powering on will temporarily change the boot order. But for the sake -of simplicity, these instructions assume you have erased the eMMC on the Black, -so its boot behavior matches that of the White and boots off of SD card. To do -this, issue the following commands from the u-boot prompt: - - # mmc dev 1 - # mmc erase 0 512 - -To further tailor these instructions for your board, please refer to the -documentation at http://www.beagleboard.org/bone and http://www.beagleboard.org/black - -From a Linux system with access to the image files perform the following steps: - - 1. Build an image. For example: - - $ bitbake core-image-minimal - - 2. Use the "dd" utility to write the image to the SD card. For example: - - # dd if=core-image-minimal-beaglebone-yocto.wic of=/dev/sdb - - 3. Insert the SD card into the Beaglebone and boot the board. - -Ubiquiti Networks EdgeRouter Lite (edgerouter) -============================================== - -The EdgeRouter Lite is part of the EdgeMax series. It is a MIPS64 router -(based on the Cavium Octeon processor) with 512MB of RAM, which uses an -internal USB pendrive for storage. - -Setup instructions ------------------- - -You will need the following: -* RJ45 -> serial ("rollover") cable connected from your PC to the CONSOLE - port on the device -* Ethernet connected to the first ethernet port on the board - -If using NFS as part of the setup process, you will also need: -* NFS root setup on your workstation -* TFTP server installed on your workstation (if fetching the kernel from - TFTP, see below). - ---- Preparation --- - -Build an image (e.g. core-image-minimal) using "edgerouter" as the MACHINE. -In the following instruction it is based on core-image-minimal. Another target -may be similiar with it. - ---- Booting from NFS root / kernel via TFTP --- - -Load the kernel, and boot the system as follows: - - 1. Get the kernel (vmlinux) file from the tmp/deploy/images/edgerouter - directory, and make them available on your TFTP server. - - 2. Connect the board's first serial port to your workstation and then start up - your favourite serial terminal so that you will be able to interact with - the serial console. If you don't have a favourite, picocom is suggested: - - $ picocom /dev/ttyS0 -b 115200 - - 3. Power up or reset the board and press a key on the terminal when prompted - to get to the U-Boot command line - - 4. Set up the environment in U-Boot: - - => setenv ipaddr <board ip> - => setenv serverip <tftp server ip> - - 5. Download the kernel and boot: - - => tftp tftp $loadaddr vmlinux - => bootoctlinux $loadaddr coremask=0x3 root=/dev/nfs rw nfsroot=<nfsroot ip>:<rootfs path> ip=<board ip>:<server ip>:<gateway ip>:<netmask>:edgerouter:eth0:off mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom) - ---- Booting from USB disk --- - -To boot from the USB disk, you either need to remove it from the edgerouter -box and populate it from another computer, or use a previously booted NFS -image and populate from the edgerouter itself. - -Type 1: Use partitioned image ------------------------------ - -Steps: - - 1. Remove the USB disk from the edgerouter and insert it into a computer - that has access to your build artifacts. - - 2. Flash the image. - - # dd if=core-image-minimal-edgerouter.wic of=/dev/sdb - - 3. Insert USB disk into the edgerouter and boot it. - -Type 2: NFS ------------ - -Note: If you place the kernel on the ext3 partition, you must re-create the - ext3 filesystem, since the factory u-boot can only handle 128 byte inodes and - cannot read the partition otherwise. - - These boot instructions assume that you have recreated the ext3 filesystem with - 128 byte inodes, you have an updated uboot or you are running and image capable - of making the filesystem on the board itself. - - - 1. Boot from NFS root - - 2. Mount the USB disk partition 2 and then extract the contents of - tmp/deploy/core-image-XXXX.tar.bz2 into it. - - Before starting, copy core-image-minimal-xxx.tar.bz2 and vmlinux into - rootfs path on your workstation. - - and then, - - # mount /dev/sda2 /media/sda2 - # tar -xvjpf core-image-minimal-XXX.tar.bz2 -C /media/sda2 - # cp vmlinux /media/sda2/boot/vmlinux - # umount /media/sda2 - # reboot - - 3. Reboot the board and press a key on the terminal when prompted to get to the U-Boot - command line: - - # reboot - - 4. Load the kernel and boot: - - => ext2load usb 0:2 $loadaddr boot/vmlinux - => bootoctlinux $loadaddr coremask=0x3 root=/dev/sda2 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom) |