diff options
Diffstat (limited to 'meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh')
-rw-r--r-- | meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh index cd80674c21..fa5395d2b0 100644 --- a/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh +++ b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh @@ -6,17 +6,17 @@ source /usr/libexec/kudo-fw/kudo-lib.sh function set_mux_default(){ # set all mux route to CPU before power on host - # BMC_CPU_RTC_I2C_SEL #120 - set_gpio_ctrl 120 out 1 - # BMC_CPU_DDR_I2C_SEL #84 - set_gpio_ctrl 84 out 1 - # BMC_CPU_EEPROM_I2C_SEL #85 - set_gpio_ctrl 85 out 1 - # BMC_CPU_PMBUS_SEL #86 - set_gpio_ctrl 86 out 1 + # BMC_CPU_RTC_I2C_SEL + set_gpio_ctrl CPU_RTC_SEL 1 + # BMC_CPU_DDR_I2C_SEL + set_gpio_ctrl CPU_DDR_SEL 1 + # BMC_CPU_EEPROM_I2C_SEL + set_gpio_ctrl CPU_EEPROM_SEL 1 + # BMC_CPU_PMBUS_SEL + set_gpio_ctrl CPU_VRD_SEL 1 # LED control - # LED_BMC_LIVE #7 - set_gpio_ctrl 7 out 1 + # LED_BMC_LIVE + set_gpio_ctrl LED_BMC_ALIVE 1 # SPI control # Send command to CPLD to switch the bios spi interface to host @@ -32,27 +32,27 @@ boardver=$(printf '%d' "$(awk '{print $6}' /sys/bus/i2c/drivers/fiicpld/34-0076/ # Set BMC_I2C_BACKUP_SEL to secondary. if [[ $boardver -lt 64 ]]; then echo "EVT system. Choosing secondary SCP EEPROM." - set_gpio_ctrl 168 out 0 + set_gpio_ctrl BACKUP_SCP_SEL 0 set_mux_default # Power control - # S0_BMC_OK, GPIO 69 - set_gpio_ctrl 69 out 1 + # S0_BMC_OK + set_gpio_ctrl S0_BMC_OK 1 else echo "DVT or PVT system" # sleep so that FRU and all ipmitool Devices are ready before HOST OS - # gpio 143 for HPM_STBY_RST_N do to DC-SCM spec - set_gpio_ctrl 143 out 1 # on DVT this became HPM_STBY_RST_N (EVT1 came from CPLD) + # HPM_STBY_RST_N to DC-SCM spec + set_gpio_ctrl HPM_STBY_RST_N 1 # on DVT this became HPM_STBY_RST_N (EVT1 came from CPLD) sleep 5 # for the MUX to get ready set_mux_default # Power control - # S0_BMC_OK, GPIO 69 - set_gpio_ctrl 69 out 1 + # S0_BMC_OK + set_gpio_ctrl S0_BMC_OK 1 fi # Disable CPU 1 CLK when cpu not detected # echo init_once cpu $CPU1_STATUS > /dev/ttyS0 # echo init_once board $boardver > /dev/ttyS0 -CPU1_STATUS_N=$(get_gpio_ctrl 136) +CPU1_STATUS_N=$(get_gpio_ctrl S1_STATUS_N) if [[ $CPU1_STATUS_N == 1 ]]; then #Execute this only on DVT systems if [[ $boardver -lt 64 ]]; then |