diff options
Diffstat (limited to 'meta-openembedded/meta-networking/recipes-support/chrony/chrony_3.2.bb')
-rw-r--r-- | meta-openembedded/meta-networking/recipes-support/chrony/chrony_3.2.bb | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/meta-openembedded/meta-networking/recipes-support/chrony/chrony_3.2.bb b/meta-openembedded/meta-networking/recipes-support/chrony/chrony_3.2.bb deleted file mode 100644 index 8b90a354ea..0000000000 --- a/meta-openembedded/meta-networking/recipes-support/chrony/chrony_3.2.bb +++ /dev/null @@ -1,134 +0,0 @@ -SUMMARY = "Versatile implementation of the Network Time Protocol" -DESCRIPTION = "Chrony can synchronize the system clock with NTP \ -servers, reference clocks (e.g. GPS receiver), and manual input using \ -wristwatch and keyboard. It can also operate as an NTPv4 (RFC 5905) \ -server and peer to provide a time service to other computers in the \ -network. \ -\ -It is designed to perform well in a wide range of conditions, \ -including intermittent network connections, heavily congested \ -networks, changing temperatures (ordinary computer clocks are \ -sensitive to temperature), and systems that do not run continuously, or \ -run on a virtual machine. \ -\ -Typical accuracy between two machines on a LAN is in tens, or a few \ -hundreds, of microseconds; over the Internet, accuracy is typically \ -within a few milliseconds. With a good hardware reference clock \ -sub-microsecond accuracy is possible. \ -\ -Two programs are included in chrony: chronyd is a daemon that can be \ -started at boot time and chronyc is a command-line interface program \ -which can be used to monitor chronyd's performance and to change \ -various operating parameters whilst it is running. \ -\ -This recipe produces two binary packages: 'chrony' which contains chronyd, \ -the configuration file and the init script, and 'chronyc' which contains \ -the client program only." - -HOMEPAGE = "https://chrony.tuxfamily.org/" -SECTION = "net" -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" - -SRC_URI = "https://download.tuxfamily.org/chrony/chrony-${PV}.tar.gz \ - file://chrony.conf \ - file://chronyd \ - file://arm_eabi.patch \ -" -SRC_URI[md5sum] = "f4c4eb0dc92f35ee4bb7d3dcd8029ecb" -SRC_URI[sha256sum] = "329f6718dd8c3ece3eee78be1f4821cbbeb62608e7d23f25da293cfa433c4116" - -DEPENDS = "pps-tools" - -# Note: Despite being built via './configure; make; make install', -# chrony does not use GNU Autotools. -inherit update-rc.d systemd - -# Configuration options: -# - For command line editing support in chronyc, you may specify either -# 'editline' or 'readline' but not both. editline is smaller, but -# many systems already have readline for other purposes so you might want -# to choose that instead. However, beware license incompatibility -# since chrony is GPLv2 and readline versions after 6.0 are GPLv3+. -# You can of course choose neither, but if you're that tight on space -# consider dropping chronyc entirely (you can use it remotely with -# appropriate chrony.conf options). -# - Security-related: -# - 'sechash' is omitted by default because it pulls in nss which is huge. -# - 'privdrop' allows chronyd to run as non-root; would need changes to -# chrony.conf and init script. -# - 'scfilter' enables support for system call filtering, but requires the -# kernel to have CONFIG_SECCOMP enabled. -PACKAGECONFIG ??= "editline \ - ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \ -" -PACKAGECONFIG[readline] = "--without-editline,--without-readline,readline" -PACKAGECONFIG[editline] = ",--without-editline,libedit" -PACKAGECONFIG[sechash] = "--without-tomcrypt,--disable-sechash,nss" -PACKAGECONFIG[privdrop] = ",--disable-privdrop,libcap" -PACKAGECONFIG[scfilter] = "--enable-scfilter,--without-seccomp,libseccomp" -PACKAGECONFIG[ipv6] = ",--disable-ipv6," -PACKAGECONFIG[nss] = "--with-nss,--without-nss,nss" -PACKAGECONFIG[libcap] = "--with-libcap,--without-libcap,libcap" - -# --disable-static isn't supported by chrony's configure script. -DISABLE_STATIC = "" - -do_configure() { - ./configure --sysconfdir=${sysconfdir} --bindir=${bindir} --sbindir=${sbindir} \ - --localstatedir=${localstatedir} --datarootdir=${datadir} \ - ${PACKAGECONFIG_CONFARGS} -} - -do_install() { - # Binaries - install -d ${D}${bindir} - install -m 0755 ${S}/chronyc ${D}${bindir} - install -d ${D}${sbindir} - install -m 0755 ${S}/chronyd ${D}${sbindir} - - # Config file - install -d ${D}${sysconfdir} - install -m 644 ${WORKDIR}/chrony.conf ${D}${sysconfdir} - - # System V init script - install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/chronyd ${D}${sysconfdir}/init.d - - # systemd unit configuration file - install -d ${D}${systemd_unitdir}/system - install -m 0644 ${S}/examples/chronyd.service ${D}${systemd_unitdir}/system/ - - # Variable data (for drift and/or rtc file) - install -d ${D}${localstatedir}/lib/chrony - - # Log files - install -d ${D}${localstatedir}/log/chrony - - # Fix hard-coded paths in config files and init scripts - sed -i -e 's!/var/!${localstatedir}/!g' -e 's!/etc/!${sysconfdir}/!g' \ - -e 's!/usr/sbin/!${sbindir}/!g' -e 's!/usr/bin/!${bindir}/!g' \ - ${D}${sysconfdir}/chrony.conf \ - ${D}${sysconfdir}/init.d/chronyd \ - ${D}${systemd_unitdir}/system/chronyd.service - sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${sysconfdir}/init.d/chronyd - sed -i 's!^EnvironmentFile=.*!EnvironmentFile=-${sysconfdir}/default/chronyd!' ${D}${systemd_unitdir}/system/chronyd.service -} - -FILES_${PN} = "${sbindir}/chronyd ${sysconfdir} ${localstatedir}" -CONFFILES_${PN} = "${sysconfdir}/chrony.conf" -INITSCRIPT_NAME = "chronyd" -INITSCRIPT_PARAMS = "defaults" -SYSTEMD_PACKAGES = "${PN}" -SYSTEMD_SERVICE_${PN} = "chronyd.service" - -# It's probably a bad idea to run chrony and another time daemon on -# the same system. systemd includes the SNTP client 'timesyncd', which -# will be disabled by chronyd.service, however it will remain on the rootfs -# wasting 150 kB unless you put 'PACKAGECONFIG_remove_pn-systemd = "timesyncd"' -# in a conf file or bbappend somewhere. -RCONFLICTS_${PN} = "ntp ntimed" - -# Separate the client program into its own package -PACKAGES =+ "chronyc" -FILES_chronyc = "${bindir}/chronyc" |