diff options
Diffstat (limited to 'poky/documentation/migration-guides')
3 files changed, 227 insertions, 20 deletions
diff --git a/poky/documentation/migration-guides/migration-2.7.rst b/poky/documentation/migration-guides/migration-2.7.rst index 69bd390603..ae70353bf7 100644 --- a/poky/documentation/migration-guides/migration-2.7.rst +++ b/poky/documentation/migration-guides/migration-2.7.rst @@ -87,8 +87,8 @@ This section provides information about packaging changes. ``bind-utils`` package. - Debug split: The default debug split has been changed to create - separate source packages (i.e. package_name\ ``-dbg`` and - package_name\ ``-src``). If you are currently using ``dbg-pkgs`` in + separate source packages (i.e. ``package_name-dbg`` and + ``package_name-src``). If you are currently using ``dbg-pkgs`` in :term:`IMAGE_FEATURES` to bring in debug symbols and you still need the sources, you must now also add ``src-pkgs`` to :term:`IMAGE_FEATURES`. Source packages remain in the diff --git a/poky/documentation/migration-guides/migration-3.4.rst b/poky/documentation/migration-guides/migration-3.4.rst index e83e936b74..e785277356 100644 --- a/poky/documentation/migration-guides/migration-3.4.rst +++ b/poky/documentation/migration-guides/migration-3.4.rst @@ -7,17 +7,18 @@ Project 3.4 Release (codename "honister") from the prior release. Override syntax changes ----------------------- -This release requires changes to the metadata to indicate where overrides are -being used in variable key names. This is done with the ``:`` character replacing -the use of ``_`` previously. This means that an entry like:: +In this release, the ``:`` character replaces the use of ``_`` to +refer to an override, most commonly when making a conditional assignment +of a variable. This means that an entry like:: SRC_URI_qemux86 = "file://somefile" -becomes:: +now becomes:: SRC_URI:qemux86 = "file://somefile" -since ``qemux86`` is an override. This applies to any use of override syntax so:: +since ``qemux86`` is an override. This applies to any use of override +syntax, so the following:: SRC_URI_append = " file://somefile" SRC_URI_append_qemux86 = " file://somefile2" @@ -29,7 +30,7 @@ since ``qemux86`` is an override. This applies to any use of override syntax so: SRCREV_pn-bash = "abc" BB_TASK_NICE_LEVEL_task-testimage = '0' -becomes:: +would now become:: SRC_URI:append = " file://somefile" SRC_URI:append:qemux86 = " file://somefile2" @@ -63,8 +64,8 @@ suffix to variables in ``layer.conf`` files such as :term:`BBFILE_PATTERN`, may be the same as a :term:`DISTRO` override causing some confusion. We do plan to try and improve consistency as these issues are identified. -To help with migration of layers there is a script in OE-Core. Once configured -with the overrides used by a layer, this can be run as:: +To help with migration of layers, a script has been provided in OE-Core. +Once configured with the overrides used by a layer, this can be run as:: <oe-core>/scripts/contrib/convert-overrides.py <layerdir> @@ -74,10 +75,198 @@ with the overrides used by a layer, this can be run as:: expected to handle every case. In particular, it needs to be told which overrides the layer uses (usually machine and distro names/overrides) and the result should be carefully checked since it can be a little enthusiastic and will convert - references to ``_append``, ``_remove`` and ``_prepend`` in function and variables names. + references to ``_append``, ``_remove`` and ``_prepend`` in function and variable + names. -For reference, this conversion is important as it allows BitBake to know what is -an override and what is not. This should allow us to proceed with other syntax -improvements and simplifications for usability. It also means bitbake no longer -has to guess and maintain large lookup lists just in case ``functionname`` in -``my_functionname`` is an override and this should improve efficiency. +For reference, this conversion is important as it allows BitBake to more reliably +determine what is an override and what is not, as underscores are also used in +variable names without intending to be overrides. This should allow us to proceed +with other syntax improvements and simplifications for usability. It also means +BitBake no longer has to guess and maintain large lookup lists just in case +e.g. ``functionname`` in ``my_functionname`` is an override, and thus should improve +efficiency. + + +New host dependencies +--------------------- + +The ``lz4c``, ``pzstd`` and ``zstd`` commands are now required to be +installed on the build host to support LZ4 and Zstandard compression +functionality. These are typically provided by ``lz4`` and ``zstd`` +packages in most Linux distributions. Alternatively they are available +as part of ``buildtools-tarball`` if your distribution does not provide +them. For more information see +:ref:`ref-manual/system-requirements:required packages for the build host`. + + +Removed recipes +--------------- + +The following recipes have been removed in this release: + +- ``assimp``: problematic from a licensing perspective and no longer + needed by anything else +- ``clutter-1.0``: legacy component moved to meta-gnome +- ``clutter-gst-3.0``: legacy component moved to meta-gnome +- ``clutter-gtk-1.0``: legacy component moved to meta-gnome +- ``cogl-1.0``: legacy component moved to meta-gnome +- ``core-image-clutter``: removed along with clutter +- ``linux-yocto``: removed version 5.4 recipes (5.14 and 5.10 still + provided) +- ``mklibs-native``: not actively tested and upstream mklibs still + requires Python 2 +- ``mx-1.0``: obsolete (last release 2012) and isn't used by anything in + any known layer +- ``packagegroup-core-clutter``: removed along with clutter + + +Removed classes +--------------- + +- ``clutter``: moved to meta-gnome along with clutter itself +- ``image-mklibs``: not actively tested and upstream mklibs still + requires Python 2 +- ``meta``: no longer useful. Recipes that need to skip installing + packages should inherit ``nopackages`` instead. + + +Prelinking disabled by default +------------------------------ + +Recent tests have shown that prelinking works only when PIE is not +enabled (see `here <https://rlbl.me/prelink-1>`__ and `here <https://rlbl.me/prelink-2>`__), +and as PIE is both a desirable security feature, and the only +configuration provided and tested by the Yocto Project, there is +simply no sense in continuing to enable prelink. + +There's also a concern that no one is maintaining the code, and there +are open bugs (including `this serious one <https://bugzilla.yoctoproject.org/show_bug.cgi?id=14429>`__). +Given that prelink does intricate address arithmetic and rewriting +of binaries the best option is to disable the feature. It is recommended +that you consider disabling this feature in your own configuration if +it is currently enabled. + + +Virtual runtime provides +------------------------ + +Recipes shouldn't use the ``virtual/`` string in :term:`RPROVIDES` and +:term:`RDEPENDS` - it is confusing because ``virtual/`` has no special +meaning in :term:`RPROVIDES` and :term:`RDEPENDS` (unlike in the +corresponding build-time :term:`PROVIDES` and :term:`DEPENDS`). + + +Tune files moved to architecture-specific directories +----------------------------------------------------- + +The tune files found in ``conf/machine/include`` have now been moved +into their respective architecture name directories under that same +location; e.g. x86 tune files have moved into an ``x86`` subdirectory, +MIPS tune files have moved into a ``mips`` subdirectory, etc. +The ARM tunes have an extra level (``armv8a``, ``armv8m``, etc.) and +some have been renamed to make them uniform with the rest of the tunes. +See `this commit <http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=1d381f21f5f13aa0c4e1a45683ed656ebeedd37d>`__ +for reference. + +If you have any references to tune files (e.g. in custom machine +configuration files) they will need to be updated. + + +Extensible SDK host extension +----------------------------- + +For a normal SDK, some layers append to :term:`TOOLCHAIN_HOST_TASK` +unconditionally which is fine, until the eSDK tries to override the +variable to its own values. Instead of installing packages specified +in this variable it uses native recipes instead - a very different +approach. This has led to confusing errors when binaries are added +to the SDK but not relocated. + +To avoid these issues, a new :term:`TOOLCHAIN_HOST_TASK_ESDK` variable has +been created. If you wish to extend what is installed in the host +portion of the eSDK then you will now need to set this variable. + + +Package/recipe splitting +------------------------ + +- ``perl-cross`` has been split out from the main ``perl`` recipe to + its own ``perlcross`` recipe for maintenance reasons. If you have + bbappends for the perl recipe then these may need extending. + +- The ``wayland`` recipe now packages its binaries in a + ``wayland-tools`` package rather than putting them into + ``wayland-dev``. + +- Xwayland has been split out of the xserver-xorg tree and thus is now + in its own ``xwayland`` recipe. If you need Xwayland in your image + then you may now need to add it explicitly. + +- The ``rpm`` package no longer has ``rpm-build`` in its :term:`RRECOMMENDS`; + if by chance you still need rpm package building functionality in + your image and you have not already done so then you should add + ``rpm-build`` to your image explicitly. + +- The Python ``statistics`` standard module is now packaged in its own + ``python3-statistics`` package instead of ``python3-misc`` as + previously. + + +Image / SDK generation changes +------------------------------ + +- Recursive dependencies on the ``do_build`` task are now disabled when + building SDKs. These are generally not needed; in the unlikely event + that you do encounter problems then it will probably be as a result of + missing explicit dependencies that need to be added. + +- Errors during "complementary" package installation (e.g. for ``*-dbg`` + and ``*-dev`` packages) during image construction are no longer + ignored. Historically some of these packages had installation problems, + that is no longer the case. In the unlikely event that you see errors + as a result, you will need to fix the installation/packaging issues. + +- When building an image, only packages that will be used in building + the image (i.e. the first entry in :term:`PACKAGE_CLASSES`) will be + produced if multiple package types are enabled (which is not a typical + configuration). If in your CI system you need to have the original + behaviour, use ``bitbake --runall build <target>``. + +- The ``-lic`` package is no longer automatically added to + :term:`RRECOMMENDS` for every other package when + :term:`LICENSE_CREATE_PACKAGE` is set to "1". If you wish all license + packages to be installed corresponding to packages in your image, then + you should instead add the new ``lic-pkgs`` feature to + :term:`IMAGE_FEATURES`. + + +Miscellaneous +------------- + +- Certificates are now properly checked when bitbake fetches sources + over HTTPS. If you receive errors as a result for your custom recipes, + you will need to use a mirror or address the issue with the operators + of the server in question. + +- ``avahi`` has had its GTK+ support disabled by default. If you wish to + re-enable it, set ``AVAHI_GTK = "gtk3"`` in a bbappend for the + ``avahi`` recipe or in your custom distro configuration file. + +- Setting the ``BUILD_REPRODUCIBLE_BINARIES`` variable to "0" no longer + uses a strangely old fallback date of April 2011, it instead disables + building reproducible binaries as you would logically expect. + +- Setting noexec/nostamp/fakeroot varflags to any value besides "1" will + now trigger a warning. These should be either set to "1" to enable, or + not set at all to disable. + +- The previously deprecated ``COMPRESS_CMD`` and + ``CVE_CHECK_CVE_WHITELIST`` variables have been removed. Use + ``CONVERSION_CMD`` and :term:`CVE_CHECK_WHITELIST` respectively + instead. + +- The obsolete ``oe_machinstall`` function previously provided in the + :ref:`utils <ref-classes-utils>` class has been removed. For + machine-specific installation it is recommended that you use the + built-in override support in the fetcher or overrides in general + instead. diff --git a/poky/documentation/migration-guides/migration-general.rst b/poky/documentation/migration-guides/migration-general.rst index 182482ec43..9eecf69af8 100644 --- a/poky/documentation/migration-guides/migration-general.rst +++ b/poky/documentation/migration-guides/migration-general.rst @@ -1,5 +1,17 @@ +Introduction +============ + +This guide provides a list of the backwards-incompatible changes you +might need to adapt to in your existing Yocto Project configuration +when upgrading to a new release. + +If you are upgrading over multiple releases, you will need to follow +the sections from the version following the one you were previously +using up to the new version you are upgrading to. + + General Migration Considerations -================================ +-------------------------------- Some considerations are not tied to a specific Yocto Project release. This section presents information you should consider when migrating to @@ -26,16 +38,17 @@ any new Yocto Project release. The better solution (where practical) is to use append files (``*.bbappend``) to capture any customizations you want to make to a - recipe. Doing so, isolates your changes from the main recipe making + recipe. Doing so isolates your changes from the main recipe, making them much more manageable. However, sometimes it is not practical to use an append file. A good example of this is when introducing a newer or older version of a recipe in another layer. + - *Updating Append Files*: - Since append files generally only contain + Since append (``.bbappend``) files generally only contain your customizations, they often do not need to be adjusted for new - releases. However, if the ``.bbappend`` file is specific to a + releases. However, if the append file is specific to a particular version of the recipe (i.e. its name does not use the % wildcard) and the version of the recipe to which it is appending has changed, then you will at a minimum need to rename the append file to @@ -50,5 +63,10 @@ any new Yocto Project release. this is the case and assuming the patch is still needed, you must modify the patch file so that it does apply. + .. tip:: + + You can list all append files used in your configuration by running: + + bitbake-layers show-appends |