diff options
Diffstat (limited to 'poky/documentation/ref-manual/ref-system-requirements.xml')
-rw-r--r-- | poky/documentation/ref-manual/ref-system-requirements.xml | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/poky/documentation/ref-manual/ref-system-requirements.xml b/poky/documentation/ref-manual/ref-system-requirements.xml new file mode 100644 index 0000000000..aea1fdf187 --- /dev/null +++ b/poky/documentation/ref-manual/ref-system-requirements.xml @@ -0,0 +1,490 @@ +<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" +"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" +[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > + +<chapter id='ref-manual-system-requirements'> +<title>System Requirements</title> + + <para> + Welcome to the Yocto Project Reference Manual! + This manual provides reference information for the current release + of the Yocto Project. + The manual is best used after you have an understanding + of the basics of the Yocto Project. + The manual is neither meant to be read as a starting point to the + Yocto Project nor read from start to finish. + Use this manual to find variable definitions, class + descriptions, and so forth as needed during the course of using + the Yocto Project. + </para> + + <para> + For introductory information on the Yocto Project, see the + <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink> and the + "<ulink url='&YOCTO_DOCS_OM_URL;#overview-development-environment'>Yocto Project Development Environment</ulink>" + chapter in the Yocto Project Overview and Concepts Manual. + </para> + + <para> + If you want to use the Yocto Project to quickly build an image + without having to understand concepts, work through the + <ulink url='&YOCTO_DOCS_BRIEF_URL;'>Yocto Project Quick Build</ulink> + document. + You can find "how-to" information in the + <ulink url='&YOCTO_DOCS_DEV_URL;'>Yocto Project Development Tasks Manual</ulink>. + You can find Yocto Project overview and conceptual information in the + <ulink url='&YOCTO_DOCS_OM_URL;'>Yocto Project Overview and Concepts Manual</ulink>. + <note><title>Tip</title> + For more information about the Yocto Project Documentation set, + see the + "<link linkend='resources-links-and-related-documentation'>Links and Related Documentation</link>" + section. + </note> + </para> + + <section id='detailed-supported-distros'> + <title>Supported Linux Distributions</title> + + <para> + Currently, the Yocto Project is supported on the following + distributions: + <note><title>Notes</title> + <itemizedlist> + <listitem><para> + Yocto Project releases are tested against the stable + Linux distributions in the following list. + The Yocto Project should work on other distributions but + validation is not performed against them. + </para></listitem> + <listitem><para> + In particular, the Yocto Project does not support + and currently has no plans to support + rolling-releases or development distributions due to + their constantly changing nature. + We welcome patches and bug reports, but keep in mind + that our priority is on the supported platforms listed + below. + </para></listitem> + <listitem><para> + If you encounter problems, please go to + <ulink url='&YOCTO_BUGZILLA_URL;'>Yocto Project Bugzilla</ulink> + and submit a bug. + We are interested in hearing about your experience. + For information on how to submit a bug, see the + Yocto Project + <ulink url='&YOCTO_WIKI_URL;/wiki/Bugzilla_Configuration_and_Bug_Tracking'>Bugzilla wiki page</ulink> + and the + "<ulink url='&YOCTO_DOCS_DEV_URL;#submitting-a-defect-against-the-yocto-project'>Submitting a Defect Against the Yocto Project</ulink>" + section in the Yocto Project Development Tasks Manual. + </para></listitem> + </itemizedlist> + </note> + <itemizedlist> +<!-- + <listitem><para>Ubuntu 10.04</para></listitem> + <listitem><para>Ubuntu 11.10</para></listitem> + <listitem><para>Ubuntu 12.04 (LTS)</para></listitem> + <listitem><para>Ubuntu 13.10</para></listitem> + <listitem><para>Ubuntu 14.04 (LTS)</para></listitem> --> + <listitem><para>Ubuntu 14.10</para></listitem> + <listitem><para>Ubuntu 15.04</para></listitem> + <listitem><para>Ubuntu 15.10</para></listitem> + <listitem><para>Ubuntu 16.04 (LTS)</para></listitem> +<!-- <listitem><para>Fedora 16 (Verne)</para></listitem> + <listitem><para>Fedora 17 (Spherical)</para></listitem> + <listitem><para>Fedora release 19 (Schrödinger's Cat)</para></listitem> + <listitem><para>Fedora release 20 (Heisenbug)</para></listitem> --> + <listitem><para>Fedora release 22</para></listitem> + <listitem><para>Fedora release 23</para></listitem> +<!-- <listitem><para>Fedora release 24</para></listitem> + <listitem><para>CentOS release 5.6 (Final)</para></listitem> + <listitem><para>CentOS release 5.7 (Final)</para></listitem> + <listitem><para>CentOS release 5.8 (Final)</para></listitem> + <listitem><para>CentOS release 6.3 (Final)</para></listitem> + <listitem><para>CentOS release 6.x</para></listitem> --> + <listitem><para>CentOS release 7.x</para></listitem> +<!-- <listitem><para>Debian GNU/Linux 6.0 (Squeeze)</para></listitem> + <listitem><para>Debian GNU/Linux 7.x (Wheezy)</para></listitem> --> + <listitem><para>Debian GNU/Linux 8.x (Jessie)</para></listitem> + <listitem><para>Debian GNU/Linux 9.x (Stretch)</para></listitem> +<!-- <listitem><para>Debian GNU/Linux 7.1 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.2 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.3 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.4 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.5 (Wheezy)</para></listitem> + <listitem><para>Debian GNU/Linux 7.6 (Wheezy)</para></listitem> --> +<!-- <listitem><para>openSUSE 11.4</para></listitem> + <listitem><para>openSUSE 12.1</para></listitem> + <listitem><para>openSUSE 12.2</para></listitem> + <listitem><para>openSUSE 12.3</para></listitem> + <listitem><para>openSUSE 13.1</para></listitem> --> + <listitem><para>openSUSE 13.2</para></listitem> + <listitem><para>openSUSE 42.1</para></listitem> + </itemizedlist> + </para> + + <note> + While the Yocto Project Team attempts to ensure all Yocto Project + releases are one hundred percent compatible with each officially + supported Linux distribution, instances might exist where you + encounter a problem while using the Yocto Project on a specific + distribution. + </note> + </section> + + <section id='required-packages-for-the-host-development-system'> + <title>Required Packages for the Host Development System</title> + + <para> + The list of packages you need on the host development system can + be large when covering all build scenarios using the Yocto Project. + This section provides required packages according to + Linux distribution and function. + </para> + + <section id='ubuntu-packages'> + <title>Ubuntu and Debian</title> + + <para> + The following list shows the required packages by function + given a supported Ubuntu or Debian Linux distribution: + <note> + If your build system has the + <filename>oss4-dev</filename> package installed, you + might experience QEMU build failures due to the package + installing its own custom + <filename>/usr/include/linux/soundcard.h</filename> on + the Debian system. + If you run into this situation, either of the following + solutions exist: + <literallayout class='monospaced'> + $ sudo apt-get build-dep qemu + $ sudo apt-get remove oss4-dev + </literallayout> + </note> + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image on a headless + system: + <literallayout class='monospaced'> + $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo apt-get install libsdl1.2-dev xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo apt-get install make xsltproc docbook-utils fop dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>OpenEmbedded Self-Test (<filename>oe-selftest</filename>):</emphasis> + Packages needed if you are going to run + <filename>oe-selftest</filename>: + <literallayout class='monospaced'> + $ sudo apt-get install python-git + </literallayout> + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='fedora-packages'> + <title>Fedora Packages</title> + + <para> + The following list shows the required packages by function + given a supported Fedora Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo dnf install SDL-devel xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo dnf install make docbook-style-dsssl docbook-style-xsl \ + docbook-dtds docbook-utils fop libxslt dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>OpenEmbedded Self-Test (<filename>oe-selftest</filename>):</emphasis> + Packages needed if you are going to run + <filename>oe-selftest</filename>: + <literallayout class='monospaced'> + $ sudo dnf install python3-GitPython + </literallayout> + </para></listitem> + </itemizedlist> + </para> + </section> + + <section id='opensuse-packages'> + <title>openSUSE Packages</title> + + <para> + The following list shows the required packages by function + given a supported openSUSE Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; + </literallayout></para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo zypper install libSDL-devel xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo zypper install make dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>OpenEmbedded Self-Test (<filename>oe-selftest</filename>):</emphasis> + Packages needed if you are going to run + <filename>oe-selftest</filename>: + <literallayout class='monospaced'> + $ sudo zypper install python-GitPython + </literallayout></para></listitem> + </itemizedlist> + <note> + Sanity testing, through the + <link linkend='ref-classes-testimage*'>testimage</link> + classes, does not work on systems using the + <ulink url='https://en.opensuse.org/Portal:Wicked'>Wicked</ulink> + network manager. + </note> + </para> + </section> + + <section id='centos-packages'> + <title>CentOS Packages</title> + + <para> + The following list shows the required packages by function + given a supported CentOS Linux distribution: + <itemizedlist> + <listitem><para><emphasis>Essentials:</emphasis> + Packages needed to build an image for a headless + system: + <literallayout class='monospaced'> + $ sudo yum install &CENTOS_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm + </literallayout> + <note><title>Notes</title> + <itemizedlist> + <listitem><para> + Extra Packages for Enterprise Linux + (i.e. <filename>epel-release</filename>) + is a collection of packages from Fedora + built on RHEL/CentOS for easy installation + of packages not included in enterprise + Linux by default. + You need to install these packages + separately. + </para></listitem> + <listitem><para> + The <filename>makecache</filename> command + consumes additional Metadata from + <filename>epel-release</filename>. + </para></listitem> + </itemizedlist> + </note> + </para></listitem> + <listitem><para><emphasis>Graphical and Eclipse Plug-In Extras:</emphasis> + Packages recommended if the host system has graphics + support or if you are going to use the Eclipse + IDE: + <literallayout class='monospaced'> + $ sudo yum install SDL-devel xterm + </literallayout></para></listitem> + <listitem><para><emphasis>Documentation:</emphasis> + Packages needed if you are going to build out the + Yocto Project documentation manuals: + <literallayout class='monospaced'> + $ sudo yum install make docbook-style-dsssl docbook-style-xsl \ + docbook-dtds docbook-utils fop libxslt dblatex xmlto + </literallayout></para></listitem> + <listitem><para><emphasis>OpenEmbedded Self-Test (<filename>oe-selftest</filename>):</emphasis> + Packages needed if you are going to run + <filename>oe-selftest</filename>: + <literallayout class='monospaced'> + $ sudo yum install GitPython + </literallayout> + </para></listitem> + </itemizedlist> + </para> + </section> + </section> + + <section id='required-git-tar-and-python-versions'> + <title>Required Git, tar, and Python Versions</title> + + <para> + In order to use the build system, your host development system + must meet the following version requirements for Git, tar, and + Python: + <itemizedlist> + <listitem><para>Git 1.8.3.1 or greater</para></listitem> + <listitem><para>tar 1.27 or greater</para></listitem> + <listitem><para>Python 3.4.0 or greater</para></listitem> + </itemizedlist> + </para> + + <para> + If your host development system does not meet all these requirements, + you can resolve this by installing a <filename>buildtools</filename> + tarball that contains these tools. + You can get the tarball one of two ways: download a pre-built + tarball or use BitBake to build the tarball. + </para> + + <section id='downloading-a-pre-built-buildtools-tarball'> + <title>Downloading a Pre-Built <filename>buildtools</filename> Tarball</title> + + <para> + Downloading and running a pre-built buildtools installer is + the easiest of the two methods by which you can get these tools: + <orderedlist> + <listitem><para> + Locate and download the <filename>*.sh</filename> at + <ulink url='&YOCTO_DL_URL;/releases/yocto/yocto-&DISTRO;/buildtools/'></ulink>. + </para></listitem> + <listitem><para> + Execute the installation script. + Here is an example: + <literallayout class='monospaced'> + $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh + </literallayout> + During execution, a prompt appears that allows you to + choose the installation directory. + For example, you could choose the following: + <literallayout class='monospaced'> + /home/<replaceable>your-username</replaceable>/buildtools + </literallayout> + </para></listitem> + <listitem><para> + Source the tools environment setup script by using a + command like the following: + <literallayout class='monospaced'> + $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-i586-poky-linux + </literallayout> + Of course, you need to supply your installation directory and be + sure to use the right file (i.e. i585 or x86-64). + </para> + <para> + After you have sourced the setup script, + the tools are added to <filename>PATH</filename> + and any other environment variables required to run the + tools are initialized. + The results are working versions versions of Git, tar, + Python and <filename>chrpath</filename>. + </para></listitem> + </orderedlist> + </para> + </section> + + <section id='building-your-own-buildtools-tarball'> + <title>Building Your Own <filename>buildtools</filename> Tarball</title> + + <para> + Building and running your own buildtools installer applies + only when you have a build host that can already run BitBake. + In this case, you use that machine to build the + <filename>.sh</filename> file and then + take steps to transfer and run it on a + machine that does not meet the minimal Git, tar, and Python + requirements. + </para> + + <para> + Here are the steps to take to build and run your own + buildtools installer: + <orderedlist> + <listitem><para> + On the machine that is able to run BitBake, + be sure you have set up your build environment with + the setup script + (<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>). + </para></listitem> + <listitem><para> + Run the BitBake command to build the tarball: + <literallayout class='monospaced'> + $ bitbake buildtools-tarball + </literallayout> + <note> + The + <link linkend='var-SDKMACHINE'><filename>SDKMACHINE</filename></link> + variable in your <filename>local.conf</filename> file + determines whether you build tools for a 32-bit + or 64-bit system. + </note> + Once the build completes, you can find the + <filename>.sh</filename> file that installs + the tools in the <filename>tmp/deploy/sdk</filename> + subdirectory of the + <link linkend='build-directory'>Build Directory</link>. + The installer file has the string "buildtools" + in the name. + </para></listitem> + <listitem><para> + Transfer the <filename>.sh</filename> file from the + build host to the machine that does not meet the + Git, tar, or Python requirements. + </para></listitem> + <listitem><para> + On the machine that does not meet the requirements, + run the <filename>.sh</filename> file + to install the tools. + Here is an example: + <literallayout class='monospaced'> + $ sh ~/Downloads/x86_64-buildtools-nativesdk-standalone-&DISTRO;.sh + </literallayout> + During execution, a prompt appears that allows you to + choose the installation directory. + For example, you could choose the following: + <literallayout class='monospaced'> + /home/<replaceable>your_username</replaceable>/buildtools + </literallayout> + </para></listitem> + <listitem><para> + Source the tools environment setup script by using a + command like the following: + <literallayout class='monospaced'> + $ source /home/<replaceable>your_username</replaceable>/buildtools/environment-setup-i586-poky-linux + </literallayout> + Of course, you need to supply your installation directory and be + sure to use the right file (i.e. i585 or x86-64). + </para> + <para> + After you have sourced the setup script, + the tools are added to <filename>PATH</filename> + and any other environment variables required to run the + tools are initialized. + The results are working versions versions of Git, tar, + Python and <filename>chrpath</filename>. + </para></listitem> + </orderedlist> + </para> + </section> + </section> +</chapter> +<!-- +vim: expandtab tw=80 ts=4 +--> |