diff options
Diffstat (limited to 'poky/meta/recipes-core/initrdscripts/files/init-install-efi.sh')
-rw-r--r-- | poky/meta/recipes-core/initrdscripts/files/init-install-efi.sh | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/poky/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/poky/meta/recipes-core/initrdscripts/files/init-install-efi.sh new file mode 100644 index 0000000000..82b0aa819e --- /dev/null +++ b/poky/meta/recipes-core/initrdscripts/files/init-install-efi.sh @@ -0,0 +1,299 @@ +#!/bin/sh -e +# +# Copyright (c) 2012, Intel Corporation. +# All rights reserved. +# +# install.sh [device_name] [rootfs_name] +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +# figure out how big of a boot partition we need +boot_size=$(du -ms /run/media/$1/ | awk '{print $1}') +# remove rootfs.img ($2) from the size if it exists, as its not installed to /boot +if [ -e /run/media/$1/$2 ]; then + boot_size=$(( boot_size - $( du -ms /run/media/$1/$2 | awk '{print $1}') )) +fi +# remove initrd from size since its not currently installed +if [ -e /run/media/$1/initrd ]; then + boot_size=$(( boot_size - $( du -ms /run/media/$1/initrd | awk '{print $1}') )) +fi +# add 10M to provide some extra space for users and account +# for rounding in the above subtractions +boot_size=$(( boot_size + 10 )) + +# 5% for swap +swap_ratio=5 + +# Get a list of hard drives +hdnamelist="" +live_dev_name=`cat /proc/mounts | grep ${1%/} | awk '{print $1}'` +live_dev_name=${live_dev_name#\/dev/} +# Only strip the digit identifier if the device is not an mmc +case $live_dev_name in + mmcblk*) + ;; + nvme*) + ;; + *) + live_dev_name=${live_dev_name%%[0-9]*} + ;; +esac + +echo "Searching for hard drives ..." + +# Some eMMC devices have special sub devices such as mmcblk0boot0 etc +# we're currently only interested in the root device so pick them wisely +devices=`ls /sys/block/ | grep -v mmcblk` || true +mmc_devices=`ls /sys/block/ | grep "mmcblk[0-9]\{1,\}$"` || true +devices="$devices $mmc_devices" + +for device in $devices; do + case $device in + loop*) + # skip loop device + ;; + sr*) + # skip CDROM device + ;; + ram*) + # skip ram device + ;; + *) + # skip the device LiveOS is on + # Add valid hard drive name to the list + case $device in + $live_dev_name*) + # skip the device we are running from + ;; + *) + hdnamelist="$hdnamelist $device" + ;; + esac + ;; + esac +done + +if [ -z "${hdnamelist}" ]; then + echo "You need another device (besides the live device /dev/${live_dev_name}) to install the image. Installation aborted." + exit 1 +fi + +TARGET_DEVICE_NAME="" +for hdname in $hdnamelist; do + # Display found hard drives and their basic info + echo "-------------------------------" + echo /dev/$hdname + if [ -r /sys/block/$hdname/device/vendor ]; then + echo -n "VENDOR=" + cat /sys/block/$hdname/device/vendor + fi + if [ -r /sys/block/$hdname/device/model ]; then + echo -n "MODEL=" + cat /sys/block/$hdname/device/model + fi + if [ -r /sys/block/$hdname/device/uevent ]; then + echo -n "UEVENT=" + cat /sys/block/$hdname/device/uevent + fi + echo +done + +# Get user choice +while true; do + echo "Please select an install target or press n to exit ($hdnamelist ): " + read answer + if [ "$answer" = "n" ]; then + echo "Installation manually aborted." + exit 1 + fi + for hdname in $hdnamelist; do + if [ "$answer" = "$hdname" ]; then + TARGET_DEVICE_NAME=$answer + break + fi + done + if [ -n "$TARGET_DEVICE_NAME" ]; then + break + fi +done + +if [ -n "$TARGET_DEVICE_NAME" ]; then + echo "Installing image on /dev/$TARGET_DEVICE_NAME ..." +else + echo "No hard drive selected. Installation aborted." + exit 1 +fi + +device=/dev/$TARGET_DEVICE_NAME + +# +# The udev automounter can cause pain here, kill it +# +rm -f /etc/udev/rules.d/automount.rules +rm -f /etc/udev/scripts/mount* + +# +# Unmount anything the automounter had mounted +# +umount ${device}* 2> /dev/null || /bin/true + +mkdir -p /tmp + +# Create /etc/mtab if not present +if [ ! -e /etc/mtab ] && [ -e /proc/mounts ]; then + ln -sf /proc/mounts /etc/mtab +fi + +disk_size=$(parted ${device} unit mb print | grep '^Disk .*: .*MB' | cut -d" " -f 3 | sed -e "s/MB//") + +swap_size=$((disk_size*swap_ratio/100)) +rootfs_size=$((disk_size-boot_size-swap_size)) + +rootfs_start=$((boot_size)) +rootfs_end=$((rootfs_start+rootfs_size)) +swap_start=$((rootfs_end)) + +# MMC devices are special in a couple of ways +# 1) they use a partition prefix character 'p' +# 2) they are detected asynchronously (need rootwait) +rootwait="" +part_prefix="" +if [ ! "${device#/dev/mmcblk}" = "${device}" ] || \ + [ ! "${device#/dev/nvme}" = "${device}" ]; then + part_prefix="p" + rootwait="rootwait" +fi + +# USB devices also require rootwait +if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then + rootwait="rootwait" +fi + +bootfs=${device}${part_prefix}1 +rootfs=${device}${part_prefix}2 +swap=${device}${part_prefix}3 + +echo "*****************" +echo "Boot partition size: $boot_size MB ($bootfs)" +echo "Rootfs partition size: $rootfs_size MB ($rootfs)" +echo "Swap partition size: $swap_size MB ($swap)" +echo "*****************" +echo "Deleting partition table on ${device} ..." +dd if=/dev/zero of=${device} bs=512 count=35 + +echo "Creating new partition table on ${device} ..." +parted ${device} mklabel gpt + +echo "Creating boot partition on $bootfs" +parted ${device} mkpart boot fat32 0% $boot_size +parted ${device} set 1 boot on + +echo "Creating rootfs partition on $rootfs" +parted ${device} mkpart root ext4 $rootfs_start $rootfs_end + +echo "Creating swap partition on $swap" +parted ${device} mkpart swap linux-swap $swap_start 100% + +parted ${device} print + +echo "Waiting for device nodes..." +C=0 +while [ $C -ne 3 ] && [ ! -e $bootfs -o ! -e $rootfs -o ! -e $swap ]; do + C=$(( C + 1 )) + sleep 1 +done + +echo "Formatting $bootfs to vfat..." +mkfs.vfat $bootfs + +echo "Formatting $rootfs to ext4..." +mkfs.ext4 $rootfs + +echo "Formatting swap partition...($swap)" +mkswap $swap + +mkdir /tgt_root +mkdir /src_root +mkdir -p /boot + +# Handling of the target root partition +mount $rootfs /tgt_root +mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root +echo "Copying rootfs files..." +cp -a /src_root/* /tgt_root +if [ -d /tgt_root/etc/ ] ; then + boot_uuid=$(blkid -o value -s UUID ${bootfs}) + swap_part_uuid=$(blkid -o value -s PARTUUID ${swap}) + echo "/dev/disk/by-partuuid/$swap_part_uuid swap swap defaults 0 0" >> /tgt_root/etc/fstab + echo "UUID=$boot_uuid /boot vfat defaults 1 2" >> /tgt_root/etc/fstab + # We dont want udev to mount our root device while we're booting... + if [ -d /tgt_root/etc/udev/ ] ; then + echo "${device}" >> /tgt_root/etc/udev/mount.blacklist + fi +fi + +umount /src_root + +# Handling of the target boot partition +mount $bootfs /boot +echo "Preparing boot partition..." + +EFIDIR="/boot/EFI/BOOT" +mkdir -p $EFIDIR +# Copy the efi loader +cp /run/media/$1/EFI/BOOT/*.efi $EFIDIR + +if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then + root_part_uuid=$(blkid -o value -s PARTUUID ${rootfs}) + GRUBCFG="$EFIDIR/grub.cfg" + cp /run/media/$1/EFI/BOOT/grub.cfg $GRUBCFG + # Update grub config for the installed image + # Delete the install entry + sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG + # Delete the initrd lines + sed -i "/initrd /d" $GRUBCFG + # Delete any LABEL= strings + sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG + # Replace root= and add additional standard boot options + # We use root as a sentinel value, as vmlinuz is no longer guaranteed + sed -i "s/ root=[^ ]*/ root=PARTUUID=$root_part_uuid rw $rootwait quiet /g" $GRUBCFG +fi + +if [ -d /run/media/$1/loader ]; then + rootuuid=$(blkid -o value -s PARTUUID ${rootfs}) + SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf" + # copy config files for systemd-boot + cp -dr /run/media/$1/loader /boot + # delete the install entry + rm -f /boot/loader/entries/install.conf + # delete the initrd lines + sed -i "/initrd /d" $SYSTEMDBOOT_CFGS + # delete any LABEL= strings + sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS + # delete any root= strings + sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS + # add the root= and other standard boot options + sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS +fi + +umount /tgt_root + +# Copy kernel artifacts. To add more artifacts just add to types +# For now just support kernel types already being used by something in OE-core +for types in bzImage zImage vmlinux vmlinuz fitImage; do + for kernel in `find /run/media/$1/ -name $types*`; do + cp $kernel /boot + done +done + +umount /boot + +sync + +echo "Remove your installation media, and press ENTER" + +read enter + +echo "Rebooting..." +reboot -f |