diff options
Diffstat (limited to 'poky/meta/recipes-graphics/libsdl/libsdl-1.2.15/pkgconfig.patch')
-rw-r--r-- | poky/meta/recipes-graphics/libsdl/libsdl-1.2.15/pkgconfig.patch | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/poky/meta/recipes-graphics/libsdl/libsdl-1.2.15/pkgconfig.patch b/poky/meta/recipes-graphics/libsdl/libsdl-1.2.15/pkgconfig.patch deleted file mode 100644 index 913baa92a0..0000000000 --- a/poky/meta/recipes-graphics/libsdl/libsdl-1.2.15/pkgconfig.patch +++ /dev/null @@ -1,187 +0,0 @@ -Rather than code which doesn't even work properly when cross compiling, -lets just use pkg-config instead. Its a little simpler. - -RP 2014/6/20 - -Upstream-Status: Pending - -Index: SDL-1.2.15/sdl.m4 -=================================================================== ---- SDL-1.2.15.orig/sdl.m4 -+++ SDL-1.2.15/sdl.m4 -@@ -12,174 +12,8 @@ dnl Test for SDL, and define SDL_CFLAGS - dnl - AC_DEFUN([AM_PATH_SDL], - [dnl --dnl Get the cflags and libraries from the sdl-config script --dnl --AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], -- sdl_prefix="$withval", sdl_prefix="") --AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], -- sdl_exec_prefix="$withval", sdl_exec_prefix="") --AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], -- , enable_sdltest=yes) -- -- if test x$sdl_exec_prefix != x ; then -- sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix" -- if test x${SDL_CONFIG+set} != xset ; then -- SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config -- fi -- fi -- if test x$sdl_prefix != x ; then -- sdl_config_args="$sdl_config_args --prefix=$sdl_prefix" -- if test x${SDL_CONFIG+set} != xset ; then -- SDL_CONFIG=$sdl_prefix/bin/sdl-config -- fi -- fi -- -- as_save_PATH="$PATH" -- if test "x$prefix" != xNONE; then -- PATH="$prefix/bin:$prefix/usr/bin:$PATH" -- fi -- AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH]) -- PATH="$as_save_PATH" - min_sdl_version=ifelse([$1], ,0.11.0,$1) -- AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) -- no_sdl="" -- if test "$SDL_CONFIG" = "no" ; then -- no_sdl=yes -- else -- SDL_CFLAGS=`$SDL_CONFIG $sdl_config_args --cflags` -- SDL_LIBS=`$SDL_CONFIG $sdl_config_args --libs` -- -- sdl_major_version=`$SDL_CONFIG $sdl_config_args --version | \ -- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` -- sdl_minor_version=`$SDL_CONFIG $sdl_config_args --version | \ -- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` -- sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ -- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` -- if test "x$enable_sdltest" = "xyes" ; then -- ac_save_CFLAGS="$CFLAGS" -- ac_save_CXXFLAGS="$CXXFLAGS" -- ac_save_LIBS="$LIBS" -- CFLAGS="$CFLAGS $SDL_CFLAGS" -- CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" -- LIBS="$LIBS $SDL_LIBS" --dnl --dnl Now check if the installed SDL is sufficiently new. (Also sanity --dnl checks the results of sdl-config to some extent --dnl -- rm -f conf.sdltest -- AC_TRY_RUN([ --#include <stdio.h> --#include <stdlib.h> --#include <string.h> --#include "SDL.h" -- --char* --my_strdup (char *str) --{ -- char *new_str; -- -- if (str) -- { -- new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); -- strcpy (new_str, str); -- } -- else -- new_str = NULL; -- -- return new_str; --} -- --int main (int argc, char *argv[]) --{ -- int major, minor, micro; -- char *tmp_version; -- -- /* This hangs on some systems (?) -- system ("touch conf.sdltest"); -- */ -- { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } -- -- /* HP/UX 9 (%@#!) writes to sscanf strings */ -- tmp_version = my_strdup("$min_sdl_version"); -- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { -- printf("%s, bad version string\n", "$min_sdl_version"); -- exit(1); -- } -- -- if (($sdl_major_version > major) || -- (($sdl_major_version == major) && ($sdl_minor_version > minor)) || -- (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) -- { -- return 0; -- } -- else -- { -- printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); -- printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro); -- printf("*** best to upgrade to the required version.\n"); -- printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n"); -- printf("*** to point to the correct copy of sdl-config, and remove the file\n"); -- printf("*** config.cache before re-running configure\n"); -- return 1; -- } --} -- --],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) -- CFLAGS="$ac_save_CFLAGS" -- CXXFLAGS="$ac_save_CXXFLAGS" -- LIBS="$ac_save_LIBS" -- fi -- fi -- if test "x$no_sdl" = x ; then -- AC_MSG_RESULT(yes) -- ifelse([$2], , :, [$2]) -- else -- AC_MSG_RESULT(no) -- if test "$SDL_CONFIG" = "no" ; then -- echo "*** The sdl-config script installed by SDL could not be found" -- echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" -- echo "*** your path, or set the SDL_CONFIG environment variable to the" -- echo "*** full path to sdl-config." -- else -- if test -f conf.sdltest ; then -- : -- else -- echo "*** Could not run SDL test program, checking why..." -- CFLAGS="$CFLAGS $SDL_CFLAGS" -- CXXFLAGS="$CXXFLAGS $SDL_CFLAGS" -- LIBS="$LIBS $SDL_LIBS" -- AC_TRY_LINK([ --#include <stdio.h> --#include "SDL.h" -- --int main(int argc, char *argv[]) --{ return 0; } --#undef main --#define main K_and_R_C_main --], [ return 0; ], -- [ echo "*** The test program compiled, but did not run. This usually means" -- echo "*** that the run-time linker is not finding SDL or finding the wrong" -- echo "*** version of SDL. If it is not finding SDL, you'll need to set your" -- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" -- echo "*** to the installed location Also, make sure you have run ldconfig if that" -- echo "*** is required on your system" -- echo "***" -- echo "*** If you have an old version installed, it is best to remove it, although" -- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], -- [ echo "*** The test program failed to compile or link. See the file config.log for the" -- echo "*** exact error that occured. This usually means SDL was incorrectly installed" -- echo "*** or that you have moved SDL since it was installed. In the latter case, you" -- echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ]) -- CFLAGS="$ac_save_CFLAGS" -- CXXFLAGS="$ac_save_CXXFLAGS" -- LIBS="$ac_save_LIBS" -- fi -- fi -- SDL_CFLAGS="" -- SDL_LIBS="" -- ifelse([$3], , :, [$3]) -- fi -+ PKG_CHECK_MODULES([SDL], [sdl >= $min_sdl_version]) - AC_SUBST(SDL_CFLAGS) - AC_SUBST(SDL_LIBS) -- rm -f conf.sdltest - ]) |