diff options
Diffstat (limited to 'poky/meta/recipes-multimedia/alsa/alsa-plugins_1.1.9.bb')
-rw-r--r-- | poky/meta/recipes-multimedia/alsa/alsa-plugins_1.1.9.bb | 173 |
1 files changed, 0 insertions, 173 deletions
diff --git a/poky/meta/recipes-multimedia/alsa/alsa-plugins_1.1.9.bb b/poky/meta/recipes-multimedia/alsa/alsa-plugins_1.1.9.bb deleted file mode 100644 index b94fc5cee3..0000000000 --- a/poky/meta/recipes-multimedia/alsa/alsa-plugins_1.1.9.bb +++ /dev/null @@ -1,173 +0,0 @@ -SUMMARY = "ALSA Plugins" -HOMEPAGE = "http://alsa-project.org" -BUGTRACKER = "http://alsa-project.org/main/index.php/Bug_Tracking" -SECTION = "multimedia" - -# The primary license of alsa-plugins is LGPLv2.1. -# -# m4/attributes.m4 is licensed under GPLv2+. m4/attributes.m4 is part of the -# build system, and doesn't affect the licensing of the build result. -# -# The samplerate plugin source code is licensed under GPLv2+ to be consistent -# with the libsamplerate license. However, if the licensee has a commercial -# license for libsamplerate, the samplerate plugin may be used under the terms -# of LGPLv2.1 like the rest of the plugins. -LICENSE = "LGPLv2.1 & GPLv2+" -LIC_FILES_CHKSUM = "\ - file://COPYING;md5=a916467b91076e631dd8edb7424769c7 \ - file://COPYING.GPL;md5=59530bdf33659b29e73d4adb9f9f6552 \ - file://m4/attributes.m4;endline=33;md5=b25958da44c02231e3641f1bccef53eb \ - file://rate/rate_samplerate.c;endline=35;md5=fd77bce85f4a338c0e8ab18430b69fae \ -" - -SRC_URI = "https://www.alsa-project.org/files/pub/plugins/${BP}.tar.bz2" -SRC_URI[md5sum] = "e0caffbd849c51ed81751378f56cb563" -SRC_URI[sha256sum] = "161772303da521abbbf1d91f63b470c4791392d5728f2192a42d71292078f907" - -DEPENDS += "alsa-lib" - -inherit autotools pkgconfig - -PACKAGECONFIG ??= "\ - samplerate \ - speexdsp \ - ${@bb.utils.filter('DISTRO_FEATURES', 'pulseaudio', d)} \ -" -PACKAGECONFIG[aaf] = "--enable-aaf,--disable-aaf,avtp" -PACKAGECONFIG[jack] = "--enable-jack,--disable-jack,jack" -PACKAGECONFIG[libav] = "--enable-libav,--disable-libav,libav" -PACKAGECONFIG[maemo-plugin] = "--enable-maemo-plugin,--disable-maemo-plugin" -PACKAGECONFIG[maemo-resource-manager] = "--enable-maemo-resource-manager,--disable-maemo-resource-manager,dbus" -PACKAGECONFIG[pulseaudio] = "--enable-pulseaudio,--disable-pulseaudio,pulseaudio" -PACKAGECONFIG[samplerate] = "--enable-samplerate,--disable-samplerate,libsamplerate0" -PACKAGECONFIG[speexdsp] = "--with-speex=lib,--with-speex=no,speexdsp" - -PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'pulseaudio', 'alsa-plugins-pulseaudio-conf', '', d)}" - -PACKAGES_DYNAMIC = "^libasound-module-.*" - -# The alsa-plugins package doesn't itself contain anything, it just depends on -# all built plugins. -FILES_${PN} = "" -ALLOW_EMPTY_${PN} = "1" - -do_install_append() { - rm ${D}${libdir}/alsa-lib/*.la - - if [ "${@bb.utils.contains('PACKAGECONFIG', 'pulseaudio', 'yes', 'no', d)}" = "yes" ]; then - # We use the example as is. Upstream installs the file under - # /etc, but we move it under /usr/share and add a symlink under - # /etc to be consistent with other installed configuration - # files. - mv ${D}${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf.example ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf - ln -s ${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf ${D}${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf - fi -} - -python populate_packages_prepend() { - plugindir = d.expand('${libdir}/alsa-lib/') - packages = " ".join(do_split_packages(d, plugindir, r'^libasound_module_(.*)\.so$', 'libasound-module-%s', 'Alsa plugin for %s', extra_depends='')) - d.setVar("RDEPENDS_alsa-plugins", packages) -} - -# Many plugins have a configuration file (plus a symlink in /etc) associated -# with them. We put the plugin and it's configuration usually in the same -# package, but that's problematic when the configuration file is related to -# multiple plugins, as is the case with the pulse, oss and maemo plugins. In -# case of the pulse plugins, we have a separate alsa-plugins-pulseaudio-conf -# package that depends on all the pulse plugins, which ensures that all plugins -# that the configuration references are installed. The oss and maemo -# configuration files, on the other hand, are in the respective pcm plugin -# packages. Therefore it's possible to install the configuration file without -# the ctl plugin that the configuration file references. This is unlikely to -# cause big problems, but some kind of improvement to the packaging could -# probably be done here (at least it would be good to handle the different -# plugins in a consistent way). -FILES_${MLPREFIX}libasound-module-ctl-arcam-av += "\ - ${datadir}/alsa/alsa.conf.d/50-arcam-av-ctl.conf \ - ${sysconfdir}/alsa/conf.d/50-arcam-av-ctl.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-a52 += "\ - ${datadir}/alsa/alsa.conf.d/60-a52-encoder.conf \ - ${sysconfdir}/alsa/conf.d/60-a52-encoder.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-alsa-dsp += "\ - ${datadir}/alsa/alsa.conf.d/98-maemo.conf \ - ${sysconfdir}/alsa/conf.d/98-maemo.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-jack += "\ - ${datadir}/alsa/alsa.conf.d/50-jack.conf \ - ${sysconfdir}/alsa/conf.d/50-jack.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-oss += "\ - ${datadir}/alsa/alsa.conf.d/50-oss.conf \ - ${sysconfdir}/alsa/conf.d/50-oss.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-speex += "\ - ${datadir}/alsa/alsa.conf.d/60-speex.conf \ - ${sysconfdir}/alsa/conf.d/60-speex.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-upmix += "\ - ${datadir}/alsa/alsa.conf.d/60-upmix.conf \ - ${sysconfdir}/alsa/conf.d/60-upmix.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-usb-stream += "\ - ${datadir}/alsa/alsa.conf.d/98-usb-stream.conf \ - ${sysconfdir}/alsa/conf.d/98-usb-stream.conf \ -" -FILES_${MLPREFIX}libasound-module-pcm-vdownmix += "\ - ${datadir}/alsa/alsa.conf.d/60-vdownmix.conf \ - ${sysconfdir}/alsa/conf.d/60-vdownmix.conf \ -" -FILES_${MLPREFIX}libasound-module-rate-lavrate += "\ - ${datadir}/alsa/alsa.conf.d/10-rate-lav.conf \ - ${sysconfdir}/alsa/conf.d/10-rate-lav.conf \ -" -FILES_${MLPREFIX}libasound-module-rate-samplerate += "\ - ${datadir}/alsa/alsa.conf.d/10-samplerate.conf \ - ${sysconfdir}/alsa/conf.d/10-samplerate.conf \ -" -FILES_${MLPREFIX}libasound-module-rate-speexrate += "\ - ${datadir}/alsa/alsa.conf.d/10-speexrate.conf \ - ${sysconfdir}/alsa/conf.d/10-speexrate.conf \ -" - -# The rate plugins create some symlinks. For example, the samplerate plugin -# creates these links to the main plugin file: -# -# libasound_module_rate_samplerate_best.so -# libasound_module_rate_samplerate_linear.so -# libasound_module_rate_samplerate_medium.so -# libasound_module_rate_samplerate_order.so -# -# The other rate plugins create similar links. We have to add the links to -# FILES manually, because do_split_packages() skips the links (which is good, -# because we wouldn't want do_split_packages() to create separate packages for -# the symlinks). -# -# The symlinks cause QA errors, because usually it's a bug if a non -# -dev/-dbg/-nativesdk package contains links to .so files, but in this case -# the errors are false positives, so we disable the QA checks. -FILES_${MLPREFIX}libasound-module-rate-lavrate += "${libdir}/alsa-lib/*rate_lavrate_*.so" -FILES_${MLPREFIX}libasound-module-rate-samplerate += "${libdir}/alsa-lib/*rate_samplerate_*.so" -FILES_${MLPREFIX}libasound-module-rate-speexrate += "${libdir}/alsa-lib/*rate_speexrate_*.so" -INSANE_SKIP_${MLPREFIX}libasound-module-rate-lavrate = "dev-so" -INSANE_SKIP_${MLPREFIX}libasound-module-rate-samplerate = "dev-so" -INSANE_SKIP_${MLPREFIX}libasound-module-rate-speexrate = "dev-so" - -# 50-pulseaudio.conf defines a device named "pulse" that applications can use -# if they explicitly want to use the PulseAudio plugin. -# 99-pulseaudio-default.conf configures the "default" device to use the -# PulseAudio plugin. -FILES_${PN}-pulseaudio-conf += "\ - ${datadir}/alsa/alsa.conf.d/50-pulseaudio.conf \ - ${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf \ - ${sysconfdir}/alsa/conf.d/50-pulseaudio.conf \ - ${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf \ -" - -RDEPENDS_${PN}-pulseaudio-conf += "\ - libasound-module-conf-pulse \ - libasound-module-ctl-pulse \ - libasound-module-pcm-pulse \ -" |