Age | Commit message (Collapse) | Author | Files | Lines |
|
Most systems are fine with supporting a warm reboot so don't make it a
default.
Change-Id: Ifb906f0b0d81b97265b6b6a79104408161bded7e
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Part of the functionality contained in the existing `cpuinfo` flag is
now split into a new flag `cpuinfo-peci`. The new flag is still
logically dependent on the existing one, but it gives finer control over
enabled features.
Remove all cpuinfo flags from default PACKAGECONFIG.
Update bbappend based on new defaults.
smbios-mdr: srcrev bump abdccd3af9..4e1cf09955
Jonathan Doman (1):
cpuinfoapp: Make PECI features optional
Change-Id: Ib9a1e634634f046b2ec6ff5629d4498bf0d5914b
Signed-off-by: Jonathan Doman <jonathan.doman@intel.com>
|
|
Update UBOOT_DEVICETREE from ast2600-bletchley to ast2600-ampere dtb
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: Idb9935f693974326e4ca7cd64dce0c713015b4e4
|
|
This variable hasn't existed in upstream poky since 2016. See
commit d06c7b8ce6249529de0bde0a568c0658b7148bf4 from their repository.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I8c832b1f4abb30255bbe080c568d833df6b96a9e
|
|
Add dcmi_sensors.json to support the IPMI dcmi sensors command.
Tested:
1. Request list out the dcmi sensors
ipmitool dcmi sensors
2. 3 groups of sensors are dislayed (inlet, basebord, CPIU).
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: I75981a5ef1101997d5519663e541cd57085d04e4
|
|
Update IPMI sensor configuration to correct EntityId and Entity Instance
for some sensors.
Tested:
1. Run "ipmitool sensor get" command and check the output for correct
Entity ID and Entity Instance information
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: I17cb008975a00f55f0bfe142d63f698310b8b54f
|
|
Once https://gerrit.openbmc.org/c/openbmc/bmcweb/+/69480 is merged,
any system not taking the defaults can be removed. Across the project
we should be consistent to make sure that the default behavior doesn't
cause log spamming or performance degredation.
Signed-off-by: Ed Tanous <ed@tanous.net>
Change-Id: I95f319e6247f9b7dcf61e0d00c4366809bf3eba5
|
|
This variable, if set, creates a symlink of /var/log to
/var/volatile/log. In most cases if machines have configured
applications like obmc-console or journald to write to /var/log
they want it to be persistent. The symlink causes them to be written
to the non-persistent tmpfs space for /var/volatile.
Set all machines to `VOLATILE_LOG_DIR = no` by default.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0f973e6b8599b32451c83d5161be079e967de711
|
|
This commit removes only-run-apr-on-power-loss from PACKAGECONFIG in
meta-ampere phosphor-state-manager recipe as this has been configured
default by meta-phosphor.
Change-Id: Ia2740609c025b8f911054f6dfb6c4871bf851a14
Signed-off-by: Chau Ly <chaul@amperecomputing.com>
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
|
|
bmcweb already defaults to having the insecure options disabled, so
there is no need to additionally specify them in a bbappend.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Icdee90ee62b0cf6adeeb63fabdee1c852cb9e26d
|
|
There is a preference in Yocto recipes for using PACAKGECONFIG instead
of EXTRA_OEMESON-style config. The phosphor-state-manager recipe seems
to be missing PACKAGECONFIG settings for some of the options being
applied by meta-ampere, but it does have one for
`only-run-apr-on-power-loss` so leverage that.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Id91c1e53679409349e5ef681194e83f0237dd610
|
|
Any system using PLDM should already `include
conf/distro/include/pldm.inc`, which enables MCTP support as a
side-effect. By default, the pldm recipe already enables `af-mctp` (the
support for the kernel subsystem):
```
meta-phosphor/recipes-phosphor/pldm/pldm_git.bb
31:PACKAGECONFIG:append:df-mctp = " transport-af-mctp"
```
We shouldn't be setting meson options to begin with, but this one is
already duplicative and ends up being a bad example for others.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I891a4c36eb331f8af6cdef9943e178f3a524d2e7
|
|
https://gerrit.openbmc.org/c/openbmc/bmcweb/+/69228 enabled
redfish-new-powersubsystem-thermalsubsystem by default remove it here in
the bbappend to keep things cleaner.
Tested: I tested having this line removed in the meta-ibm bbappend when
testing 69228.
Change-Id: Ic91451a63ee19f6e80d61e9252de6e1bd5c3692f
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
This commit removes support for controlling uart muxes from Host. The
uart muxes will now be default to connect to BMC on AC/DC. This
therefore can remove all the mux control scripts in obmc-console recipe.
Tested:
Upon BMC AC/DC
Can successfully ssh to Host's uart consoles via BMC's IP
Example: ssh root@<BMC_IP> -p 2200
Signed-off-by: Chau Ly <chaul@amperecomputing.com>
Change-Id: Ia4f421956f182dcb5d8e2e2ef8cb4eb404a15f2d
|
|
Currently just one LED group for FAN fault check. This causes FAN
fault LED might be changed to OFF even when still having failure on
some FANs.
This commit changes to have LED group for each FAN to fix this issue.
Tested:
1. Unplug two random FANs
2. Plug one FAN into the board and verify that FAN Led status is
still on
3. Plug all FAN into the board and verify that FAN Led status is off.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I8cf2eeafbe7372b0eda85c133e88a228b5cd0a2a
|
|
Currently just one LED group for FAN fault check. This causes FAN
fault LED might be changed to OFF even when still having failure on
some FANs.
This commit changes to have LED group for each FAN to fix this issue.
Tested:
1. Unplug two random FANs
2. Plug one FAN into the board and verify that FAN Led status is
still on
3. Plug all FAN into the board and verify that FAN Led status is off.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: Ic48fb402266bd3b95263ba8278e2f50d3bbb3bfe
|
|
phosphor-led-manager is changed to use xyz.openbmc_project.Inventory.
Decorator.Compatible interface to select the configuration file.
This updates the led-group-config.json file to
com.ampere.Hardware.Chassis.Model.MtMitchell.json follow the
phosphor-led-manager.
Tested: verify that led config file in the system
root@mtmitchell-dcscm:~# ls /usr/share/phosphor-led-manager/
com.ampere.Hardware.Chassis.Model.MtMitchell.json
com.ibm.Hardware.Chassis.Model.Rainier1S4U.json
com.ibm.Hardware.Chassis.Model.Rainier4U.json
com.ibm.Hardware.Chassis.Model.Everest.json
com.ibm.Hardware.Chassis.Model.Rainier2U.json
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: Id7a2f885a933319b8b09279689dfb627c843cf88
|
|
phosphor-led-manager is changed to use xyz.openbmc_project.Inventory.
Decorator.Compatible interface to select the configuration file.
This updates the led-group-config.json file to
com.ampere.Hardware.Chassis.Model.MtMitchell.json follow the
phosphor-led-manager.
Tested: verify that led config file in the system
root@mtjade:~# ls /usr/share/phosphor-led-manager/
com.ampere.Hardware.Chassis.Model.MtJade.json
com.ibm.Hardware.Chassis.Model.Rainier1S4U.json
com.ibm.Hardware.Chassis.Model.Rainier4U.json
com.ibm.Hardware.Chassis.Model.Everest.json
com.ibm.Hardware.Chassis.Model.Rainier2U.json
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I83647f465506d3fc3202d2b8f7145a1342f86dcf
|
|
Remove shell scripts which are not used in core services.
Tested:
1. Compile Mt.Jade and Mt.Mitchell without errors
2. Check power control still works fine
Change-Id: I740b804a9e43b4826c5549a7a1e17eab745ded70
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
|
|
This commit adds bmc_ready and sw_heartbeat leds to bmc_booted group.
When BMC's status is Ready, phosphor-led-manager shall assert bmc_ready
GPIO and create bmc/sw heart-beat signals to CPLD/HOST.
By the heartbeat signals are create by leds, the service to create
heartbeat signals is redundant, therefore ampere-bmc-heartbeat.service
shall be removed.
Tested:
1. Turn on/off, power cycle, reboot host features work correctly.
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: If21649c1a70a6b43acf8130561181e534f762b61
|
|
This corrects the name of the PSU from CPU1 to PSU1.
Tested:
1. Get PSUs name
busctl get-property xyz.openbmc_project.Inventory.Manager \
/xyz/openbmc_project/inventory/system/powersupply/PowerSupply0 \
xyz.openbmc_project.Inventory.Item PrettyName
s "PSU0"
busctl get-property xyz.openbmc_project.Inventory.Manager \
/xyz/openbmc_project/inventory/system/powersupply/PowerSupply1 \
xyz.openbmc_project.Inventory.Item PrettyName
s "PSU1"
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I3e1110d3b76335d7412006f75e79073f9f776151
|
|
Assert Fault LED when detecting OVERTEMP signal asserted.
This is done by adding new overtemp_fault LED group and
update the overtemp service to assert/de-assert the LED
group.
1. Start the ampere_overtemp@.service
2. Verify that the `Fault Led` is turned on and turn off after 10s.
3. Verify that Thermal Trip SEL is created.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: Ifbc203bf79a13741082d84850b9e75ca6148a6cd
|
|
The phosphor-led-manager will monitors the
`xyz.openbmc_project.State.Decorator.OperationalStatus` interface
of the Inventory D-Bus object, and check whether the Inventory
D-Bus object is associated with the LED group D-Bus object, and
then update the Asserted property of the LedManager.
This adds the fan_fault led group to associations.json file to
monitors the FANs and turns on the fault led when the FANs fails.
1. Unplug the fan and verify that both `Fan Fault Led` and
`Fault Led` are turned on.
2. Plug the fan and verify that both `Fan Fault Led` and `Fault Led`
are turned off.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I2adc0fb8846c4690f8eaac3bb80e6dbf25077be3
|
|
Support FAN fault check via by enabling phosphor-led-manager's
monitor-operational-status with appropriate
phosphor-inventory-manager associations configuration.
Tested:
1. Get Led group list
$ busctl tree xyz.openbmc_project.LED.GroupManager
`- /xyz
`- /xyz/openbmc_project
`- /xyz/openbmc_project/led
`- /xyz/openbmc_project/led/groups
|- /xyz/openbmc_project/led/groups/fan_fault
2. Change the fan pwm, then stop the fan control service and verify
that fault led is on
3. Start the fan control service and verify that fault led is off
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: If473ebfe288d80515217e7e5fb9dc6244dcb8ed3
|
|
Thang Q. Nguyen (2):
build: upgrade to C++23
meson_options.txt: Support for reading options from meson.options
Change-Id: I8ed2e0106b7e9be1af37f22bb98a2852c381e71a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Change LED configuration format to json to adapt new default setting in
phosphor-led-manager application.
Tested:
1. Check if all LED Groups are created, the same as using yaml file
root@mtmitchell-dcscm:~# busctl tree xyz.openbmc_project.LED.GroupManager
`- /xyz
`- /xyz/openbmc_project
`- /xyz/openbmc_project/led
`- /xyz/openbmc_project/led/groups
|- /xyz/openbmc_project/led/groups/bmc_booted
|- /xyz/openbmc_project/led/groups/power_on
|- /xyz/openbmc_project/led/groups/enclosure_identify
|- /xyz/openbmc_project/led/groups/enclosure_identify_blink
`- /xyz/openbmc_project/led/groups/systemFault
2. Check if no error message in journal log
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I7de6bfe333bad04f045c38bb9ff7aeb64eaed8bd
|
|
phosphor-led-manager changed to use json configuration by default.
However, Mt.Mitchell still uses yaml configuration which consequently
fail to parse for platform LED configuration.
This commit changes configuration from yaml to json to adapt upstream
codes.
Tested:
1. Check if all LED Groups are created, the same as using yaml file
root@mtmitchell-dcscm:~# busctl tree xyz.openbmc_project.LED.GroupManager
`- /xyz
`- /xyz/openbmc_project
`- /xyz/openbmc_project/led
`- /xyz/openbmc_project/led/groups
|- /xyz/openbmc_project/led/groups/bmc_booted
|- /xyz/openbmc_project/led/groups/power_on
|- /xyz/openbmc_project/led/groups/enclosure_identify
|- /xyz/openbmc_project/led/groups/enclosure_identify_blink
`- /xyz/openbmc_project/led/groups/systemFault
2. Check if no error message in journal log
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ibdc2a566d89d8d661f299aff84539e471061090a
|
|
Add CPU and Power Supply presence interfaces using
phosphor-multi-gpip-presence.
Tested:
1. Check if CPU_x dbus exists
$ busctl get-property xyz.openbmc_project.Inventory.Manager \
/xyz/openbmc_project/inventory/system/chassis/motherboard/CPU_2 \
xyz.openbmc_project.Inventory.Item PrettyName`
s "CPU_2"
2. Check if sensors that are required with CPURequired are reported
$ ipmitool sdr list
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I7ce9819f39f8a2afb386fa6b00421f1ead935189
|
|
Remove ampere-fault-monitor application which should be implemented via
phosphor-led-manager framework.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iecd482657383de31dae0ee74bd0ca4de41d22f63
|
|
Andrew Geissler (1):
OWNERS: Change maintainers to their user id's
Change-Id: I0125d30872a2721783358f41da688a4375195750
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
|
|
Switch to use phosphor-networkd's sync-mac feature to get and use MAC
address from FRU, replacing Ampere approach.
Tested:
1. Boot the BMC to Linux and login to console
2. Get BMC MAC address in FRU
$ ipmitool fru print 0 | grep "Board Extra"
Board Extra : 70:E2:84:8F:E3:56
3. Check eth0 HWaddr with MAC in FRU
$ ifconfig eth1 | grep HWaddr
eth1 Link encap:Ethernet HWaddr 70:E2:84:8F:E3:56
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Signed-off-by: Khang Nguyen <khangng@amperecomputing.com>
Change-Id: I7121fde2f7b8d673e3ae0b1e5a03f175a10ea578
|
|
Switch to use phosphor-networkd's sync-mac feature to get and use MAC
address from FRU, replacing Ampere approach.
Tested:
1. Boot the BMC to Linux and login to console
2. Get BMC MAC address in FRU
$ ipmitool fru print 1 | grep "Board Extra"
Board Extra : B4:05:5D:E1:01:BC
3. Check eth0 HWaddr with MAC in FRU
$ ifconfig eth0 | grep HWaddr
eth0 Link encap:Ethernet HWaddr B4:05:5D:E1:01:BC
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Signed-off-by: Khang Nguyen <khangng@amperecomputing.com>
Change-Id: Ia31589bf75306ad5a3639cb46a73813957e85e9d
|
|
This fixes packages in packagegroup as follows:
+ Removes phosphor-post-code-manager, phosphor-host-postd
which is already in packagegroup-bmc-apps
+ Adds missing phosphor-ipmi-blobs, phosphor-ipmi-blobs-binarystore
into mtjade.conf
Tested: code compiles.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: Ic3f9668e4714566a814cc928067289d650a59f41
|
|
Refactor console configuration for Mt.Jade and Mt.Mitchell to avoid
duplication and make the configuration files simpler.
Tested:
1. IPMI sol on Mt.Jade and Mt.Mitchell works
2. SOL SSH on Mt.Jade and Mt.Mitchell work for all console ports
Change-Id: I68d1a3c6be530ca93f8adc1dd61906ba8b206dc5
Signed-off-by: Chau Ly <chaul@amperecomputing.com>
|
|
Update virtual sensor expression to better handle nan values by using
maxIgnoreNaN and sumIgnoreNaN functions.
Tested:
1. Check IPMI sensor report using `ipmitool sdr list`
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I901de9ad299fc318756902ded6bc938ae86579c9
|
|
Add front backplane and other on-board sensors that are available on the
Mt.Mitchell DVT board.
This commit also updates virtual sensor expression using sumIgnoreNaN
and maxIgnoreNaN functions to better handle nan values
Tested:
1. Run 'ipmitool sdr list' and check for sensor report
2. Check sensor report from Redfish and WebUI
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ia2a221929026141dbd6a2482f4017be7fe2026cc
|
|
This moves packagegroup to common to be used for all platforms.
Tested:
- All packages are available on RootFs
- ipmi sensor, fru report
- Web login
- Power control
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I87f7ddbd94e9321e452353ed21cacd0f8a4d8f74
|
|
Enable MCTP in kernel support with Mt.Mitchell MCTP configuration.
Tested:
1. Check for mctpi2c3 in ifconfig command.
2. Check for mctpd.service service started and is in running state.
3. Check for pldmd.service service started and is in running state.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I699e9bc93ae5815b8454a8cc42ec22d4cfd735e1
|
|
This commit supports log the power on sequence to analyze power on
failure. This would include:
- PSU power good monitoring to indicate PSU is powered on.
- System power good monitoring to indicate CPU is powered on.
Tested:
1. Power on Host, check the Event logs identify the system
/redfish/v1/Systems/system/LogServices/EventLog/Entries
"Message": "Host firmware boots with 1 Processor",
2. Check the Event logs in case power on failure.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: I15237d5f6be454b628529fce43424514bf445d53
|
|
In the commit 16bb75ab on the openbmc repo, it disables warm-reboot
build option in phosphor-state-manager by default. To enable warm-reboot
option, we have to remove no-warm-reboot packge configuration.
Tested:
1. Request power reset Host.
$ipmitool power reset
2. ForceWarmReboot target is called.
Change-Id: I4f7d4d4b148e77867562ed1a8efe7797f4a6d8dd
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
|
|
In the commit 16bb75ab on the openbmc repo, it disables warm-reboot by
default, we don't have to disable it again.
Tested:
1. Request power reset Host.
$ipmitool power reset
2. Reboot target is called.
Change-Id: Ie1ed12709c200d358ae4e93e55565ebd1ea68c4f
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
|
|
Currently, in the platform initialization phase, BMC is checking PGOOD
gpio via both dbus and "/sys/class/gpio" methods. The "power_control"
application is polling PGOOD. Sometimes, "power_control" stops checking
the PGOOD's status due to a conflict with platform initialization. It
makes BMC can not control the power.
This commit removes the conflict between the "power_control" and the
platform initialization as below:
- Update ampere-platform-init.service to request the platform
initialization run before the "power_control".
- Update mtmitchell_platform_gpios_init.sh to remove checking PGOOD via
dbus.
Tested:
The platform initialization runs before the "power_control".
Turn on/off the host, reboot BMC, AC power work correctly.
Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
Change-Id: Ic9619f93b8a49c578a8a0d733872a636ec6fc100
|
|
Mt.Jade GPIO line-names are updated to follow naming convention at
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
This commit updates related scripts to use the correct linenames.
Tested:
Check below features to work as before:
+ UEFI and SCP firmware update.
+ Host power control
+ Ampere UART mux switch
+ SCP failover
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Change-Id: I080f844047618327042a7742d3fa6423b62be744
|
|
Change to use gpioset and gpioget to set value for output GPIOs and read
value for input GPIOs.
This commit also corrects GPIO base numbers which are changed in Linux
kernel 6.5
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I802f9d777537ff28f94945006b6582b15523e3a8
|
|
The webui-vue package is now enabled by default. Clean up all the meta
layers to clean up the explicit enablement.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
|
|
This moves the OpenBMC kernel to a v6.5 base for ASPEED.
The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device
tress are now under an 'aspeed' subdirectory. This change means systems
must describe the KERNEL_DEVICETREE with the aspeed directory prefix.
There are 78 patches in the tree, with 40 of those patches not
yet queued for merging in v6.6.
The remaining out of tree patches include:
Andrew Jeffery (6):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (16):
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
eeprom: ee1004: Enable devices on multiple busses
dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
eeprom: ee1004: Add OF matching support
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
leds: Ensure hardware blinking turns off when requested
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (14):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
ARM: dts: nuvoton: npmc750-evb: Add default console
tpm: tis-i2c: Add more compatible strings
leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
arm64: configs: Add Nuvoton NPCM defconfig
ARM: configs: aspeed: Add new FSI drivers
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: Add openbmc defconfig
ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Polling GPIO every 0.5s might cause system performance degraded.
This reverts commit 57fa7921b248f52858a48110d9670c62cea2eff0 to find
better solution for this feature.
Change-Id: I00adf3cd7b355f260d0687c9a907b2dc45731697
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
|
|
This commit removes scripts to check GPIO fault as they poll GPIOs every
0.25s. Better solution needs to be found for this feature.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ieef28d7d7f74dc43548c5448706ca8dbcb06ec2e
|