Age | Commit message (Collapse) | Author | Files | Lines |
|
This includes security and bug fixes from the 6.0.9 and 6.0.10 stable
releases.
Change-Id: I5326d1afe439f9363e9ee6c3a0be365e9a3a9a3a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Bletchley currently has the following compile warning:
```
WARNING: linux-aspeed-6.0.8+gitAUTOINC+1b16243b00-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
[NOTE]: 'CONFIG_HW_RANDOM_TPM' last val (y) and .config val (n) do not match
[INFO]: CONFIG_HW_RANDOM_TPM : n
Config 'HW_RANDOM_TPM' has the following Direct dependencies (HW_RANDOM_TPM=n):
TCG_TPM(=y) && HW_RANDOM(=m) && !(TCG_TPM(=y) = y && HW_RANDOM(=m) = m) (=n)
```
This is due to HW_RANDOM=m by default. Explicitly set HW_RANDOM=y in
the tpm2 config snippet where HW_RANDOM_TPM=y is set.
Change-Id: I7185cdab58de19dcf456d9aaad1c563fccc04d71
|
|
Joel Stanley (1):
ARM: config: aspeed: Add Apemre SMPro drivers
Quan Nguyen (8):
ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
mfd: Add Ampere's Altra SMpro MFD driver
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
misc: smpro-errmon: Add Ampere's SMpro error monitor driver
misc: smpro-misc: Add Ampere's Altra SMpro misc driver
hwmon: Add Ampere's Altra smpro-hwmon driver
docs: hwmon: (smpro-hwmon) Add documentation
docs: hwmon: (smpro-hwmon) Improve grammar and formatting
Change-Id: Ie497288d7a26e8b32e0874bbfab2e630248bda67
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
tpm: Add flag to use default cancellation policy
tpm: tis_i2c: Fix sanity check interrupt enable mask
Change-Id: I14ae1baeb5a7ae817e3d9dd3b259c3fef5ba5143
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Guenter Roeck (1):
Revert "hwmon: (pmbus) Add regulator supply into macro"
Joel Stanley (1):
tpm: tis-i2c: Add more compatible strings
Matti Vaittinen (1):
regulator: Add devm helpers for get and enable
Zev Weiss (5):
regulator: devres: Add devm_regulator_bulk_get_exclusive()
regulator: Add regulator-output binding
regulator: userspace-consumer: Handle regulator-output DT nodes
dt-bindings: arm: aspeed: document Delta AHE-50DC BMC
ARM: dts: aspeed: Add Delta AHE-50DC BMC
Change-Id: Ifabdc96e014e439b634e0764e2272aa27cbe870c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 6.0.7 and 6.0.8
stable releases.
Change-Id: Ic5b3145c8b9f678f17f416819fc656acb4926e8d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (1):
ARM: dts: aspeed: bonnell: Update incorrect eeprom address
Santosh Puranik (1):
ARM: dts: aspeed: rainier: Fix pca9551 nodes
Change-Id: If8a5703c2865f019e1ec3a5f231d990201faf426
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 6.0.4 through to 6.0.6
stable releases.
Change-Id: I50cae835e2da47e1a5fb100bf6b43e974c74bc5b
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (1):
ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes
Potin Lai (1):
ARM: dts: aspeed-g6: add aliases for mdio nodes
Change-Id: I9deb758f93e4587873ebedbaf0c11bfdc63f5ccf
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 6.0.3 stable release.
Change-Id: I7f85e1de492e7280ed5da18973274e4a53ca7bea
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 6.0.1 and 6.0.2 stable
releases.
Change-Id: I901f61142628856b843f3849a8896c6ffa9ce7b1
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Chin-Ting Kuo (1):
spi: aspeed: Fix typo in mode_bits field for AST2600 platform
Cédric Le Goater (1):
spi: aspeed: Fix window offset of CE1
Jeremy Kerr (1):
mctp: prevent double key removal and unref
Joel Stanley (1):
usb: gadget: aspeed: Fix probe regression
Change-Id: Ie7d3829732e3077a1539632129e6fd43bf3e4eb0
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I89ac0235f9342b731bcb6a22a5c7086fae69af73
|
|
Joel Stanley (2):
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
Potin Lai (2):
ARM: dts: aspeed: bletchley: update and fix gpio-line-names
ARM: dts: aspeed: bletchley: enable emmc and ehci1
Quan Nguyen (3):
ipmi: ssif_bmc: Add SSIF BMC driver
bindings: ipmi: Add binding for SSIF BMC driver
i2c: aspeed: Assert NAK when slave is busy
Change-Id: I2238e1504cdb5db9ef7977df96aa5a270b5971c3
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves the OpenBMC kernel to a v6.0 base for ASPEED.
There are 81 patches in the tree, with 40 of those patches not
yet queued for merging in v6.1 (and 17 of these relate to Nuvoton not
ASPEED).
Since v5.15, we have the following support now merged upstream:
- PECI, thanks to Jae and Iwona
- MCTP, thanks to Jermey and Matt
- spi-nor, thanks to Cédric
- nct6775 i2c and lm25066, thanks to Zev
- ast2600 adc, thanks to Billy
- ast2600 gfx, thanks to Tommy
Congratulations to everyone who worked on these patches and got them
through upstream review. Your contributions improve OpenBMC for
everyone, and ease the maintenance work required for the kernel.
The remainding out of tree ASPEED patches that need to be worked on:
Andrew Jeffery (7):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ipmi: kcs: Poll OBF briefly to reduce OBE latency
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (7):
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (6):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
arm64: configs: Add Nuvoton NPCM defconfig
ARM: dts: nuvoton: npmc750-evb: Add default console
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Change-Id: I285cf7ef264dfa7ab4cd59222874324aaec1538b
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
It's an x86 thing, so it's dead code.
Saves 1.6KB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I96fce5c5355737bd1974089d0ad1538334340a62
|
|
SLUB_DEBUG increases code size and has no known users in production BMC
images. It was likely implicitly enabled when we switched from SLAB to
SLUB in commit 271bf3dce908 ("meta-aspeed: Enable hardened allocator
feature").
aspeed_g5_defconfig (v5.15):
Total: Before=11329249, After=11309638, chg -0.17%
aspeed_g5_defconfig (v6.0):
Total: Before=11003344, After=10949112, chg -0.49%
Built with arm-linux-gnueabihf-gcc (Debian 12.2.0-3).
A saving of 19KB for the current kernel, and 54KB for the future kernel
version.
Change-Id: I446d6e8b6e9f4b717de9c3ee06e0b822e5cde75f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Error Detection and Correction driver is used for reporting ECC
errors to userspace.
On a system that does not have ECC enabled it will not probe.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Id804e055eef6a6cc1696fedaf670d4ec125d1417
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Adriana Kobylak (1):
ARM: dts: aspeed: rainier,everest: Move reserved memory regions
Joel Stanley (2):
iio: pressure: dps310: Reset chip after timeout
leds: pca955x: Add HW blink support
Change-Id: I6cd6d104bd7d1b2fb85625b530ba1b68f33a6351
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.68 and
5.15.69 stable releases.
Change-Id: Ie421be7ade33e2f887aff0432dcb44d6f6f63cbe
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.62 through to
5.15.67 stable releases.
Change-Id: I7db52e67280e16b19fb18dae743bf8ccb4231c20
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (1):
ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
Change-Id: I5a43ba03d00001cfa408d0a35337e8fc2465170f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Quan Nguyen (5):
ARM: dts: aspeed: mtjade: Enable secondary flash
ARM: dts: aspeed: mtjade: Update rtc-battery-voltage-read-enable pin
ARM: dts: aspeed: mtjade: Update host0-ready pin
ARM: dts: aspeed: mtjade: Rename GPIO hog nodes to match schema.
ARM: dts: aspeed: mtjade: Move all adc sensors into iio-hwmon node
Change-Id: Ic9f87a8e90e8af33f8df5982f11eb02d2ba181bd
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.60 and 5.15.61
stable releases.
Change-Id: I0d226adcea5539028ad63c52f02d42e247f1a299
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Potin Lai (2):
ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
ARM: dts: aspeed: bletchley: Remove hdc1080 node
Change-Id: I5ca01ca42c86d94ebe6e9ba8bf513da6681ecb0e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.51 through to 5.15.59
stable releases.
Change-Id: I0e4917a3cd0c461730d8f7b1fb029878a5b7ff05
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
hwmon: (occ) Prevent power cap command overwriting poll response
hwmon (occ): Fix response length in checksum retry
Jae Hyun Yoo (1):
ARM: dts: aspeed: nuvia: Rename vendor nuvia to qcom
Change-Id: I9d31007d60111cc188530d07c289ec927424b47f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Potin Lai (4):
ARM: dts: aspeed: bletchley: change LED sys_log_id to active low
ARM: dts: aspeed: bletchley: disable GPIOV2 pull-down
ARM: dts: aspeed: bletchley: bind presence-sledX pins via gpio-keys
ARM: dts: aspeed: bletchley: update fusb302 nodes
Change-Id: I078921ad45431d82bc1a628311d3b9dec95c2cb5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.44 through to 5.15.50
stable releases.
Change-Id: I8f44dfab06e5f75ce999fbdc8936945e483823fe
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.42 and 5.15.43 stable
releases.
This bump also includes these three changes:
Cédric Le Goater (1):
ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
Johnny Huang (2):
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
Change-Id: I0ce42d51f47a483fec65010b5e022a5a7275674c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
Joel Stanley (1):
iio: si7020: Revert "Remove reset in probe"
Change-Id: I61463092a96bd2d103b718c650436a97ced55dd6
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
spi: fsi: Fix spurious timeout
spi: core: Display return code when failing to transfer message
Change-Id: I0e62d11debe2de27b35bed6250ff69934b551662
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port for AST2600 systems.
Change-Id: I82151eb409e48324607efd65f79fdbe4df36ced3
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Eddie James (5):
leds: pca955x: Set blink duty cycle to fifty percent
leds: Ensure hardware blinking turns off when requested
iio: pressure: dps310: Refactor startup procedure
iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
iio: si7020: Remove reset in probe
Joel Stanley (1):
ARM: dts: aspeed: everest: Add SiLabs sensor
Change-Id: Ic39b7df5b06863aca8bfdc142b68e7400821d79a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Dan Carpenter (1):
hwmon: (nct6775) delete some extension lines
Denis Pauk (9):
hwmon: (nct6775) Use superio_*() function pointers in sio_data.
hwmon: (nct6775) Use nct6775_*() function pointers in nct6775_data.
hwmon: (nct6775) Support access via Asus WMI
hwmon: (nct6775) Add additional ASUS motherboards.
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
hwmon: (nct6775) add ASUS Pro B550M-C/PRIME B550M-A
hwmon: (nct6775) add ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-P
Dmitry Baryshkov (1):
hwmon: (nct6775) add PRIME B550-PLUS motherboard to whitelist
Eddie James (1):
fsi: occ: Prevent use after free
Graeme Gregory (1):
ARM: dts: aspeed: Add Nuvia DC-SCM BMC
Guenter Roeck (1):
hwmon: (nct6775) Fix crash in clear_caseopen
Howard Chiu (1):
ARM: dts: aspeed: ast2600-evb: Enable video engine
Joel Stanley (1):
net: ftgmac100: Disable hardware checksum on AST2600
Neal Liu (1):
ARM: dts: aspeed: Add USB2.0 device controller node
Oleksandr Natalenko (1):
hwmon: (nct6775) add Pro WS X570-ACE
Potin Lai (6):
ARM: dts: aspeed: bletchley: enable ehci0 device node
ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
ARM: dts: aspeed: bletchley: Enable mdio0 bus
ARM: dts: aspeed: bletchley: update gpio0 line names
ARM: dts: aspeed: bletchley: add pca9536 node on each sled
ARM: dts: aspeed: bletchley: add eeprom node on each sled
Zev Weiss (9):
hwmon: (nct6775) mask out bank number in nct6775_wmi_read_value()
hwmon: (nct6775) add support for TSI temperature registers
hwmon: (nct6775) Convert register access to regmap API
hwmon: (nct6775) Rearrange attr-group initialization
hwmon: (nct6775) Add read-only mode
hwmon: (nct6775) Convert S_I* permissions macros to octal
hwmon: (nct6775) Split core and platform driver
dt-bindings: hwmon: Add nuvoton,nct6775
hwmon: (nct6775) Add i2c driver
Change-Id: I19d22f9eea8b58f228852ec7a06891cf18f0295c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.37 through to
5.15.41 stable releases.
Change-Id: I71a4d8a46d18658311dc45fba02ffbeaf8069c0c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is v6 of the patchset to move to a spi-mem based driver. It
replaces the half out of tree driver previously used, and contains
support for the AST2400, AST2500 and AST2600.
https://lore.kernel.org/linux-mtd/20220503060634.122722-1-clg@kaod.org/
Thank you to Cédric for his hard work maintaining the SPI NOR driver and
reworking it to be a SPI mem driver.
Cédric Le Goater (9):
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
dt-bindings: spi: Add Aspeed SMC controllers device tree binding
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: aspeed: Add support for direct mapping
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Calibrate read timings
ARM: dts: aspeed: Enable Dual SPI RX transfers
Potin Lai (1):
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
Tao Ren (1):
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
Change-Id: Ia1bb25a455c0c6f0d8e92ff3241d60bd234a1fa2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I746b04e1e36abaf2ff3852beb8a04535692442c1
|
|
This includes security and bug fixes from the 5.15.35 and 5.15.36 stable
releases.
Change-Id: Id8b0000cbac05c97d94157e70241f999966ced53
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Brandon Wyman (1):
ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
Eddie James (2):
fsi: occ: Fix checksum failure mode
hwmon (occ): Retry for checksum failure
Change-Id: I1cfd517554888c6fa73c4cb589451a169061dabc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Dylan Hung (3):
dt-bindings: net: add reset property for aspeed, ast2600-mdio binding
net: mdio: add reset control for Aspeed MDIO
ARM: dts: aspeed: add reset properties into MDIO nodes
Change-Id: If2505bcc6e0baf5465dfbaae1cff947399a5411d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (5):
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
soc: aspeed: xdma: Add trace events
Potin Lai (3):
hwmon: (adm1275) Allow setting sample averaging
dt-bindings: hwmon: Add sample averaging properties for ADM1275
ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I6853e3ffe36ed50161c336cd396edfdf7238fa0c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.31 through to
5.15.34 stable releases.
Change-Id: Ic4224311d30cd60617734a93746cf8eff49c6bea
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: Remove SPI NOR controllers
Potin Lai (3):
net: mdio: aspeed: move reg accessing part into separate functions
net: mdio: aspeed: Introduce read write function for c22 and c45
net: mdio: aspeed: Add c45 support
Change-Id: I599c02fecff4ad639aeb17164a7b0aa8516f8c91
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Jae Hyun Yoo (5):
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
Johnny Huang (2):
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
Potin Lai (1):
mtd: spi-nor: aspeed: Set the decoding size to at least 2MB for AST2600
Zev Weiss (1):
ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC
Change-Id: I648e798dc8c8392509c1cc6fc14b5e02ec7c6d19
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.27 through to
5.15.30 stable releases.
Change-Id: I36b40ac0203ba4182b7cac200088a366b6104037
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Brandon Wyman (1):
hwmon: (pmbus) Add Vin unit off handling
Eddie James (1):
spi: fsi: Implement a timeout for polling status
Howard Chiu (1):
ARM: dts: aspeed: ast2600-evb: Enable RX delay on MAC0/MAC1
Roger Quadros (1):
usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-X
Vikash Chandola (1):
hwmon: (pmbus) Clear pmbus fault/warning bits after read
Change-Id: Id4276becc2e563b67a04948177a797d193d8854f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Backport of the MCTP core and drivers from mainline provided by Jeremy
and Matt.
Eugene Syromiatnikov (1):
mctp: handle the struct sockaddr_mctp_ext padding field
Gagan Kumar (1):
mctp: Remove only static neighbour on RTM_DELNEIGH
Jeremy Kerr (29):
mctp: Allow local delivery to the null EID
mctp: locking, lifetime and validity changes for sk_keys
mctp: Add refcounts to mctp_dev
mctp: Implement a timeout for tags
mctp: Add tracepoints for tag/key handling
mctp: Do inits as a subsys_initcall
doc/mctp: Add a little detail about kernel internals
mctp: Add initial test structure and fragmentation test
mctp: Add test utils
mctp: Add packet rx tests
mctp: Add route input to socket tests
mctp: Add input reassembly tests
mctp: Implement extended addressing
mctp: Return new key from mctp_alloc_local_tag
mctp: Add flow extension to skb
mctp: Pass flow data & flow release events to drivers
mctp/test: Update refcount checking in route fragment tests
mctp: Add MCTP-over-serial transport binding
mctp: serial: cancel tx work on ldisc close
mctp: serial: enforce fixed MTU
mctp: serial: remove unnecessary ldisc data check
mctp: test: fix skb free in test device tx
mctp: tests: Rename FL_T macro to FL_TO
mctp: tests: Add key state tests
mctp: Add helper for address match checking
mctp: Allow keys matching any local address
mctp: replace mctp_address_ok with more fine-grained helpers
mctp: add address validity checking for packet receive
mctp: serial: Cancel pending work from ndo_uninit handler
Joel Stanley (1):
ARM: configs: aspeed_g5: Enable MCTP stack
Matt Johnston (15):
mctp: Allow MCTP on tun devices
mctp: Set route MTU via netlink
mctp: Warn if pointer is set for a wrong dev type
mctp: Avoid leak of mctp_sk_key
mctp: emit RTM_NEWADDR and RTM_DELADDR
mctp: test: zero out sockaddr
mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control
mctp: make __mctp_dev_get() take a refcount hold
mctp: Fix incorrect netdev unref for extended addr
mctp: Fix warnings reported by clang-analyzer
mctp: Avoid warning if unregister notifies twice
dt-bindings: net: New binding mctp-i2c-controller
mctp i2c: MCTP I2C binding driver
mctp i2c: Fix potential use-after-free
mctp i2c: Fix hard head TX bounds length check
Tom Rix (1):
mctp: fix use after free
Xu Wang (1):
mctp: Remove redundant if statements
Yang Yingliang (1):
mctp: remove unnecessary check before calling kfree_skb()
Change-Id: I99c4bd0eb9725116052d112f731864add8e2117b
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (4):
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Update secure boot controller support
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable GFX device
Tommy Haung (2):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
Wang Xiaohua (1):
ARM: dts: aspeed-g6: Restore video node
Change-Id: Ib4a7715ff1bb8b17bbd04d3eee7a43d70111ceee
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.25 through to
5.15.26 stable releases.
Notably it includes a fix for CVE-2022-0847, the "Dirty Pipe"
vulnerability.
Change-Id: I8fe3aabf8cf0bd6cf03f437a548b58f942c22b13
Signed-off-by: Joel Stanley <joel@jms.id.au>
|