Age | Commit message (Collapse) | Author | Files | Lines |
|
This includes security and bug fixes from the 5.15.35 and 5.15.36 stable
releases.
Change-Id: Id8b0000cbac05c97d94157e70241f999966ced53
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Brandon Wyman (1):
ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
Eddie James (2):
fsi: occ: Fix checksum failure mode
hwmon (occ): Retry for checksum failure
Change-Id: I1cfd517554888c6fa73c4cb589451a169061dabc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: Iabba6e2d3f2c4e19af821b22164681f1d69a2501
|
|
The LICENSE string 'GPLv2+' is considered obsolete by Yocto and raises a
warning. Switch them too the accepted tag 'GPL-2.0-or-later'.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I88c639dbb45762e2e019a3503f1f1930b65c09d6
|
|
Dylan Hung (3):
dt-bindings: net: add reset property for aspeed, ast2600-mdio binding
net: mdio: add reset control for Aspeed MDIO
ARM: dts: aspeed: add reset properties into MDIO nodes
Change-Id: If2505bcc6e0baf5465dfbaae1cff947399a5411d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
THe diff between the old commit and this one is below. This includes new
changes from the SDK, and the existing patches rebased on top of the new
SDK release.
Adriana Kobylak (1):
configs: aspeed-common: Add redundant env for mmc
Chia-Wei Wang (1):
configs: evb-ast2600-spl: Remove U-Boot MMC raw sector
Chin-Ting Kuo (5):
spi_nor: aspeed: Update SPI driver
spi: apseed: Update timing compensation calculation method
dts: ast2600: Update decoded address size
spi: aspeed: Fix resource size calculation method
dts: aspeed: Sync the real scenario of AST2600 EVB
Dylan Hung (8):
ram: aspeed: remove incorrect Vref information
ram: aspeed: remove dead code and refine comment
ram: aspeed: revise tRFI configuration
ram: aspeed: fix incorrect printf
ram: aspeed: revise coding style
cmd: aspeed: nettest: add RTL8211F(D)-VD-CG support
net: phy: realtek: Add RTL8211F-VD driver support
clk: ast2600: fix ast2600_find_dly32_tap return value
Eddie James (5):
gpio: Enable hogging support in SPL
ast2600: Add GPIO controller and hog TPM reset pin
ARM: dts: aspeed: tacoma: Add eMMC nodes and parameters
ARM: dts: aspeed: rainier: Add eMMC nodes and parameters
Add GPIO hogging support for AST2600 openbmc config
George Hung (1):
ARM: dts: aspeed: add Quanta S6Q machine dts
Heiko Schocher (2):
gpio: add gpio-hog support
gpio: fixes for gpio-hog support
Jamin Lin (1):
fix compiling warnings for AST2600 A1 SPL
Jammy Huang (1):
misc: dp: Update fw
Jean-Jacques Hiblot (1):
dm: Add a No-op uclass
Joel Stanley (15):
Makefile: Conditionally add defaultenv_h to envtools target
ast2600: spl: Fix build when accelerators are disabled
ARM: dts: rainier: Enable ACRY and HACE
ARM: dts: tacoma: Enable ACRY and HACE
aspeed: Disable unused loaders, add STMICRO flash
aspeed: Sort dts files in makefile
as2600/scu: Fix printing of security info
ast2600: spl: Implement board_boot_order
configs: Add OpenBMC spl defconfig for AST2600 boards
ast2600: Allow selection of SPL boot devices
config: ast2600: Add config for SPL MMC boot with FIT signature verification
ast2600: Add environment for booting from mmc
ast2600/openbmc: Use emmc based configuration
crypto: Restore old driver for Aspeed HACE
ARM: dts: aspeed: Disable ACRY for rainier and tacoma
Neal Liu (3):
crypto: aspeed: combine acry drivers into a file
arm: dts: ast2600: add acry sram base
crypto: aspeed: acry: add private allocated space for device
Peng Fan (1):
tools: imx image: fix write warning
Potin Lai (1):
ARM: dts: Aspeed: Add Bletchley dts
Troy Lee (2):
ARM: aspeed: Disable ABR WDT when boot from UART with secure boot
configs: aspeed: Increase SPL stack size
Zev Weiss (1):
pinctrl: ast2400: add support for TXD3/RXD3 pins
ryan_chen (3):
rename pcie driver for aspeed phy and pcie controller
ast2600:bclk is come from epll. it will update in datasheet
platform.S:ast2600: modify for only reset at AC on
Change-Id: I52b1be9474461e18dd26fd08472c2824485c1c09
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (5):
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
soc: aspeed: xdma: Add trace events
Potin Lai (3):
hwmon: (adm1275) Allow setting sample averaging
dt-bindings: hwmon: Add sample averaging properties for ADM1275
ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I6853e3ffe36ed50161c336cd396edfdf7238fa0c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.31 through to
5.15.34 stable releases.
Change-Id: Ic4224311d30cd60617734a93746cf8eff49c6bea
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: Remove SPI NOR controllers
Potin Lai (3):
net: mdio: aspeed: move reg accessing part into separate functions
net: mdio: aspeed: Introduce read write function for c22 and c45
net: mdio: aspeed: Add c45 support
Change-Id: I599c02fecff4ad639aeb17164a7b0aa8516f8c91
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Jae Hyun Yoo (5):
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
Johnny Huang (2):
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
Potin Lai (1):
mtd: spi-nor: aspeed: Set the decoding size to at least 2MB for AST2600
Zev Weiss (1):
ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC
Change-Id: I648e798dc8c8392509c1cc6fc14b5e02ec7c6d19
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.27 through to
5.15.30 stable releases.
Change-Id: I36b40ac0203ba4182b7cac200088a366b6104037
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Jamin Lin (1):
ast2600: Fix compile warnings for AST2600 A1 SPL
Joel Stanley (1):
as2600/scu: Fix printing of security info
Change-Id: I4f2ee7cf8a95721e49f7e98bcc87407d5b87c766
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Brandon Wyman (1):
hwmon: (pmbus) Add Vin unit off handling
Eddie James (1):
spi: fsi: Implement a timeout for polling status
Howard Chiu (1):
ARM: dts: aspeed: ast2600-evb: Enable RX delay on MAC0/MAC1
Roger Quadros (1):
usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-X
Vikash Chandola (1):
hwmon: (pmbus) Clear pmbus fault/warning bits after read
Change-Id: Id4276becc2e563b67a04948177a797d193d8854f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Backport of the MCTP core and drivers from mainline provided by Jeremy
and Matt.
Eugene Syromiatnikov (1):
mctp: handle the struct sockaddr_mctp_ext padding field
Gagan Kumar (1):
mctp: Remove only static neighbour on RTM_DELNEIGH
Jeremy Kerr (29):
mctp: Allow local delivery to the null EID
mctp: locking, lifetime and validity changes for sk_keys
mctp: Add refcounts to mctp_dev
mctp: Implement a timeout for tags
mctp: Add tracepoints for tag/key handling
mctp: Do inits as a subsys_initcall
doc/mctp: Add a little detail about kernel internals
mctp: Add initial test structure and fragmentation test
mctp: Add test utils
mctp: Add packet rx tests
mctp: Add route input to socket tests
mctp: Add input reassembly tests
mctp: Implement extended addressing
mctp: Return new key from mctp_alloc_local_tag
mctp: Add flow extension to skb
mctp: Pass flow data & flow release events to drivers
mctp/test: Update refcount checking in route fragment tests
mctp: Add MCTP-over-serial transport binding
mctp: serial: cancel tx work on ldisc close
mctp: serial: enforce fixed MTU
mctp: serial: remove unnecessary ldisc data check
mctp: test: fix skb free in test device tx
mctp: tests: Rename FL_T macro to FL_TO
mctp: tests: Add key state tests
mctp: Add helper for address match checking
mctp: Allow keys matching any local address
mctp: replace mctp_address_ok with more fine-grained helpers
mctp: add address validity checking for packet receive
mctp: serial: Cancel pending work from ndo_uninit handler
Joel Stanley (1):
ARM: configs: aspeed_g5: Enable MCTP stack
Matt Johnston (15):
mctp: Allow MCTP on tun devices
mctp: Set route MTU via netlink
mctp: Warn if pointer is set for a wrong dev type
mctp: Avoid leak of mctp_sk_key
mctp: emit RTM_NEWADDR and RTM_DELADDR
mctp: test: zero out sockaddr
mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control
mctp: make __mctp_dev_get() take a refcount hold
mctp: Fix incorrect netdev unref for extended addr
mctp: Fix warnings reported by clang-analyzer
mctp: Avoid warning if unregister notifies twice
dt-bindings: net: New binding mctp-i2c-controller
mctp i2c: MCTP I2C binding driver
mctp i2c: Fix potential use-after-free
mctp i2c: Fix hard head TX bounds length check
Tom Rix (1):
mctp: fix use after free
Xu Wang (1):
mctp: Remove redundant if statements
Yang Yingliang (1):
mctp: remove unnecessary check before calling kfree_skb()
Change-Id: I99c4bd0eb9725116052d112f731864add8e2117b
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (4):
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Update secure boot controller support
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable GFX device
Tommy Haung (2):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
Wang Xiaohua (1):
ARM: dts: aspeed-g6: Restore video node
Change-Id: Ib4a7715ff1bb8b17bbd04d3eee7a43d70111ceee
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.25 through to
5.15.26 stable releases.
Notably it includes a fix for CVE-2022-0847, the "Dirty Pipe"
vulnerability.
Change-Id: I8fe3aabf8cf0bd6cf03f437a548b58f942c22b13
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (2):
ARM: soc: aspeed: Add secure boot controller support
ARM: dts: aspeed: Fix AST2600 quad spi group
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jviq
Change-Id: I1a13a975dec3e8afe312ff51f0961f963aee2336
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
* Deprecate N-1 release (hardknott).
* Enable N+1 release (kirkstone).
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
|
|
Eddie James (5):
ARM: dts: aspeed: p10bmc: Enable ftrace in ramoops buffer
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
hwmon: (occ) Add sysfs entry for OCC mode
hwmon: (occ) Add sysfs entries for additional extended status bits
hwmon: (occ) Add soft minimum power cap attribute
Joel Stanley (2):
ARM: dts: aspeed: rainer: Add RTC battery gpio name
ARM: dts: aspeed: everest: Add RTC battery gpio name
Change-Id: Ifb6bc7a6c8ffe3e36edbaa5ce94014ddcdc51e90
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Disable the hardware root-of-trust on AST2600 EVB.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: Iabf3bafb5db633de34731e041064318f8f56da5a
|
|
The MAINTAINERS files are no longer used and are out of date (references
to IRC still exist in most of them). Remove them and rely on the OWNERS
exclusively.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
|
|
Modifications to the SRC_URI should be append rather than a set
operation, so that they do not erase any changed to the SRC_URI that may
have happened prior to the include file. Otherwise, it can ignore local
patches being applied for testing, which can make for irate developers.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I9bd95352fa30bd0e8dfd89404d2ac0dbb4d78a3a
|
|
Amitay Isaacs (2):
fsi: sbefifo: Use specified value of start of response timeout
fsi: sbefifo: Implement FSI_SBEFIFO_READ_TIMEOUT_SECONDS ioctl
Cédric Le Goater (1):
dt-bindings: soc: aspeed XDMA fixes
Eddie James (2):
fsi: occ: Improve response status checking
fsi: Add trace events in initialization path
Change-Id: Ia99942034191173fcd75f7eae183e2bd9fecc743
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
aspeed: Sort dts files in makefile
Potin Lai (1):
arm: dts: Aspeed: add Bletchley dts
Troy Lee (1):
configs: aspeed: Increase SPL stack size
Change-Id: If64f45949bb1a26ac6c8fc04427cb7f24a5c5420
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.19 through to
5.15.24 stable releases.
Change-Id: I34150c6817f4487d2e95e37babf3221a4df15ae8
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
George Hung (1):
ARM: dts: aspeed: Add device tree for Quanta S6Q BMC
Patrick Williams (1):
mtd: aspeed-smc: improve probe resilience
Potin Lai (10):
ARM: dts: aspeed: bletchley: Switch sled numbering to 1-based
ARM: dts: aspeed: bletchley: Separate leds into multiple groups
ARM: dts: aspeed: bletchley: Update gpio-line-names
ARM: dts: aspeed: bletchley: Update fmc configurations
ARM: dts: aspeed: bletchley: Switch to spi-gpio for spi2
ARM: dts: aspeed: bletchley: Add interrupt support for sled io expander
ARM: dts: aspeed: bletchley: Add shunt-resistor for ADM1278
ARM: dts: aspeed: bletchley: Add INA230 sensor on each sled
ARM: dts: aspeed: bletchley: Enable mdio3 bus
ARM: dts: aspeed: bletchley: Cleanup redundant nodes
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I38a12f1566d82a7025e7c44bd4e2b68a815e5aa7
|
|
The EVB build is currently using the A1 device tree. Use the plain
ast2600-evb.dts, as this represents the production silicon.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Icef427718958bf19ee75fec906cf0476f5d37138
|
|
The old 2016.09 branch is unmaintained. ASPEED have support for the 2500
in the SDK, so use that instead.
Change-Id: Iece96616d24ac21028e91695e0c8ab86d9ade1a9
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
aspeed: Disable unused loaders, add STMICRO flash
Peng Fan (1):
tools: imx image: fix write warning
Change-Id: I12b8d4dead50bee2c9053efef0a485cb7fe0b179
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves to the latest ASPEED SDK release. In addition we have
backports of gpio-hog support added, in order to implement a feature for
the Rainier system.
The old branch is archived as archive/v2019.04-aspeed-openbmc-4.
The patches on top of the SDK are:
Adriana Kobylak (1):
configs: aspeed-common: Add redundant env for mmc
Eddie James (5):
ARM: dts: aspeed: tacoma: Add eMMC nodes and parameters
ARM: dts: aspeed: rainier: Add eMMC nodes and parameters
gpio: Enable hogging support in SPL
Add GPIO hogging support for AST2600 openbmc config
ast2600: Add GPIO controller and hog TPM reset pin
Heiko Schocher (2):
gpio: add gpio-hog support
gpio: fixes for gpio-hog support
Jean-Jacques Hiblot (1):
dm: Add a No-op uclass
Joel Stanley (13):
tools: Add script for generating recovery image
Makefile: Conditionally add defaultenv_h to envtools target
ast2600: spl: Fix build when accelerators are disabled
ARM: dts: rainier: Enable ACRY and HACE
ARM: dts: tacoma: Enable ACRY and HACE
ast2600: spl: Implement board_boot_order
configs: Add OpenBMC spl defconfig for AST2600 boards
ast2600: Allow selection of SPL boot devices
config: ast2600: Add config for SPL MMC boot with FIT signature verification
ast2600: Add environment for booting from mmc
ast2600/openbmc: Use emmc based configuration
crypto: Restore old driver for Aspeed HACE
ARM: dts: aspeed: Disable ACRY for rainier and tacoma
Zev Weiss (1):
pinctrl: ast2400: add support for TXD3/RXD3 pins
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I3cfb7a6bb39c2c2fb2aa53c8f911a6224d33fd87
|
|
1. Add otptool.bbclass to create otp image.
2. Update u-boot recipe to "inherit otptool.bbclass" for
otp image creation in the u-boot tasks.
3. Update socsec tool for SPL and OTP image verification if
verify failed u-boot should be built failed.
4. Use OE logging utilities.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: I0ba5da4d112b49d182bdf2751614afe62850eac3
|
|
Warning message:
work/openbmc/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb:
URL: git://github.com/openbmc/linux;protocol=git;branch=dev-5.15
uses git protocol which is no longer supported by github.
Please change to ;protocol=https in the url.
Tested: build linux-aspeed repo and eliminate the warning message.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I00d55df9dd760a1cdef2f6b0db934c9a2cc8b7fa
|
|
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: If2b06db8d5ca3f07ff03b0c397e8476ec28587b1
|
|
OE convention (see OE-Core rev: f44bb4588) is for bitbake variables to
use braces and ordinary shell variables to not use braces.
Change-Id: I640076712f58d971b173849844215a64565a1d51
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OE provides utilities for both warning and error messages, so use them.
Change-Id: I7548e09e69015dda4043d5aaa00a0c869393c595
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
With the latest yocto subtree update, this function has been moved into
the global python package.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I60fd8a2160e45823065a9a28ae36af263baa15cb
|
|
Previously, the u-boot-fw-utils-aspeed-sdk build didn't take *.cfg files
in SRC_URI into account at all, leading to problematic mismatches
between fw_{set,print}env's configuration and that of u-boot itself
(such as discrepancies in their respective notions of what the default
environment should be).
With this change the fw-utils build uses the same do_configure as the
regular u-boot build, so the two packages can more easily be built with
a single consistent configuration.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: Ia83768597b6b75dc00425bdc23f216274d87e0ae
|
|
This includes security and bug fixes from the 5.15.15 through to
5.15.18 stable releases.
Change-Id: I71a0c4d8c134434725bba8e2a7deec37783550bc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
USB: serial: pl2303: Add IBM device IDs
ARM: dts: aspeed: rainier and everest: Enable UHCI
Jiasheng Jiang (1):
fsi: core: Check error number after calling ida_simple_get
Joel Stanley (3):
fsi: scom: Fix error handling
fsi: scom: Remove retries in indirect scoms
ARM: configs: aspeed_g5: Add PL2303 USB serial driver
Change-Id: I8a39a2adc4ec761c910f8a675ac653b2ce739a3f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
In general, software such as openssl calculates digest(big endian) of input data and uses big-endian digest to sign for RSA signature creation.
However, AST2600 A1 only supports little endian. In other words, AST2600 A1 crypto hardware engine digest output is “little endian”.
That is why our SOCSEC tool reverse signature and digest to match the AST2600 A1 crypto engine design(little endian).
AST2600 A3 changed the design to support big endian. ASPEED recommends using big endian to remain compatible with general software tool design
and therefore SOCSEC tool does not need to reverse digest and signature.
Default to big endian for OpenBMC platforms as A3 is production silicon, and earlier revisions are not well supported.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: Iba46f704b86990d53937f104c3c601da5a3c111f
|
|
This makes the v2019.04-aspeed-openbmc branch the default for all aspeed
machines.
Existing machines have all modified their u-boot package to use the
older branch, so this patch should result in no change.
Change-Id: Ic4dd0bb973a16d3d658c340e7caf6a05128327bc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This sets u-boot to the package containing the v2016.07-aspeed-openbmc
branch. This ensures there will be no change if the default changes in
the future.
Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This driver requires CONFIG_TCG_TPM and CONFIG_TCG_TIS_I2C.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: If461c2fec0874c09410388bcce7990334b81a726
|
|
This includes security and bug fixes from the 5.15.11 through to
5.15.14 stable releases.
Change-Id: I289d25f7f3d02010e6be586e2c992a8b88204a7c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Amir Mizinski (5):
tpm_tis: Fix expected bit handling
tpm: tpm_tis: Rewrite "tpm_tis_req_canceled()"
tpm: tpm_tis: Verify TPM_STS register is valid after locality request
tpm: tpm_tis: Add tpm_tis_i2c driver
tpm: Add YAML schema for TPM TIS I2C options
Andrew Geissler (2):
ARM: dts: aspeed: rainier: add reset-cause-pinhole
ARM: dts: aspeed: everest: add reset-cause-pinhole
Chen Jun (1):
tpm: add request_locality before write TPM_INT_ENABLE
Christophe Jaillet (1):
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
Howard Chiu (邱冠睿) (1):
hwmon: (pmbus) Add support for MPS Multi-phase mp5023
Joel Stanley (2):
ARM: configs: aspeed_g5: Add mp5023 driver
ARM: config: aspeed_g5: Add TPM TIS I2C driver
Patrick Williams (1):
tpm: fix NPE on probe for missing device
Change-Id: Ie6ef09e03df8bc44ef70d900a4fc3b874e1d6688
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
When using 64M flash, the config of u-boot CONFIG_ENV_SIZE and
CONFIG_ENV_OFFSET is wrong. The config file fw_env.config is wrong, too.
Modify them according to the 64M flash dts file.
Before correcting these errors, when we used setenv to set environment
variables in u-boot, we could not use fw_printenv to get them. The
reverse is also the same. Because they set different offset and size.
Tested:
1. Use commands in u-boot:
setenv test value
saveenv
After BMC starts, use fw_printenv can get "test=value"
2. Use the command to change the value of "test"
fw_setenv test v
We can get "test=v" in u-boot by printenv.
Signed-off-by: zhanghaicheng <zhanghch05@inspur.com>
Change-Id: I9eccf6abe743253b6f8c344a8b8648e68ab52019
|
|
Append tpm2 in MACHINE_FEATURES to enable related kernel configs
MACHINE_FEATURES:append = " tpm2"
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Ie6b50d81040de2863487cffc449193ec9462bf89
|
|
This includes security and bug fixes from the 5.15.6 through to
5.15.10 stable releases.
Change-Id: Ib4e8e69386ba6c7857c22d8b2fb063c9d8d03b36
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These are backports from the v5.17 aspeed pull request.
Ali El-Haj-Mahmoud (1):
ARM: dts: aspeed: Add TYAN S8036 BMC machine
Andrei Kartashev (2):
dt-bindings: vendor-prefixes: add YADRO
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
Eddie James (2):
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: p10: Add TPM device
Howard Chiu (1):
ARM: dts: aspeed: Adding Facebook Bletchley BMC
Jae Hyun Yoo (3):
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
Joel Stanley (3):
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: aspeed: Add secure boot controller node
ipmi: bt: Add ast2600 compatible string
Lei YU (2):
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: g220a: Enable secondary flash
Oskar Senft (1):
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
Quan Nguyen (2):
ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices
ARM: dts: aspeed: mtjade: Add uefi partition
Change-Id: I89371d3ab9c99415b3e971fbb62a6cad8b8e4b16
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
1. To fix python modules not found such as bitarray at do_compile task
, adds "DEPEND" to install dependencies.
2. Create a socsec.inc to place the common settings.
3. Create a socsec_1.0.0.bb to build socsec tool v1.0.0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: I27a9216419555b58e7484e85506fa229f0e230b7
|