Age | Commit message (Collapse) | Author | Files | Lines |
|
It's been quite some time since I've helped to maintain the ASpeed
bitbake metadata, so it is time to remove myself from the list. Thanks
to Joel for stepping in to fill that void long ago.
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I12dd9590bde4144a69b89e03fc7a06a76d1ab495
|
|
It's an x86 thing, so it's dead code.
Saves 1.6KB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I96fce5c5355737bd1974089d0ad1538334340a62
|
|
SLUB_DEBUG increases code size and has no known users in production BMC
images. It was likely implicitly enabled when we switched from SLAB to
SLUB in commit 271bf3dce908 ("meta-aspeed: Enable hardened allocator
feature").
aspeed_g5_defconfig (v5.15):
Total: Before=11329249, After=11309638, chg -0.17%
aspeed_g5_defconfig (v6.0):
Total: Before=11003344, After=10949112, chg -0.49%
Built with arm-linux-gnueabihf-gcc (Debian 12.2.0-3).
A saving of 19KB for the current kernel, and 54KB for the future kernel
version.
Change-Id: I446d6e8b6e9f4b717de9c3ee06e0b822e5cde75f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
|
|
Joel Stanley (1):
ram/aspeed: Re-init ECC if requested but not enabled
Change-Id: I083b2cec3b569efee97a16c5e9d2cbfeba642951
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves ECC support to be device tree based. All u-boot images using
the defconfig will contain the code to run with ECC, but it will only be
enabled by systems that set the aspeed,ecc-enabled device tree property.
p10bmc is the first machine to enable ECC in this fashion.
Joel Stanley (4):
config/ast2500: Enable RAM devices
ram/aspeed: Use device tree to configure ECC
ram/aspeed: Remove ECC config option
ARM: dts: aspeed: p10bmc: Enable ECC
Change-Id: I352f7d801f4becb937a2dede5910618eeddd1f0e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Error Detection and Correction driver is used for reporting ECC
errors to userspace.
On a system that does not have ECC enabled it will not probe.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Id804e055eef6a6cc1696fedaf670d4ec125d1417
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Adriana Kobylak (1):
ARM: dts: aspeed: rainier,everest: Move reserved memory regions
Joel Stanley (2):
iio: pressure: dps310: Reset chip after timeout
leds: pca955x: Add HW blink support
Change-Id: I6cd6d104bd7d1b2fb85625b530ba1b68f33a6351
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.68 and
5.15.69 stable releases.
Change-Id: Ie421be7ade33e2f887aff0432dcb44d6f6f63cbe
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.62 through to
5.15.67 stable releases.
Change-Id: I7db52e67280e16b19fb18dae743bf8ccb4231c20
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The latest poky commit is requiring us to have all of
our template configs in a subdirectory instead of directly in
the `conf` directory. Without this we end up with errors during
setup like:
```
Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name
```
Fix this by moving all of our template files into the 'default'
template subdirectory (following the pattern of poky) and modifying
`setup` as necessary to follow.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
|
|
Eddie James (1):
ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree
Change-Id: I5a43ba03d00001cfa408d0a35337e8fc2465170f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Quan Nguyen (5):
ARM: dts: aspeed: mtjade: Enable secondary flash
ARM: dts: aspeed: mtjade: Update rtc-battery-voltage-read-enable pin
ARM: dts: aspeed: mtjade: Update host0-ready pin
ARM: dts: aspeed: mtjade: Rename GPIO hog nodes to match schema.
ARM: dts: aspeed: mtjade: Move all adc sensors into iio-hwmon node
Change-Id: Ic9f87a8e90e8af33f8df5982f11eb02d2ba181bd
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.60 and 5.15.61
stable releases.
Change-Id: I0d226adcea5539028ad63c52f02d42e247f1a299
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Potin Lai (2):
ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
ARM: dts: aspeed: bletchley: Remove hdc1080 node
Change-Id: I5ca01ca42c86d94ebe6e9ba8bf513da6681ecb0e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
ARM: dts: aspeed: Add a Romulus board (AST2500)
Change-Id: I7896cfaf111cd757b602cbd194c281bd05776170
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable generating multiple OTP binaries by specifying multiple OTP
configuration files.
Change-Id: I1ce81cd2c1d0f501578b927eb31cce5a37cdcf1f
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
We're moving towards support for generating multiple OTP binaries per
platform configuration, so allow for differentiation in the file paths.
Change-Id: Iff01e524013fbf8cfdec0f8d7e7a599ee457514d
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
It mistakenly refers to SDRAM, which doesn't make sense in context.
Change-Id: I1890b4b87ddc7592f28cdcd1957952dd8bdfaba7
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
Jae Hyun Yoo (1):
mtd: spi-nor-ids: add winbond w25q512nw family support
Change-Id: Id46df51aab2bc6313d9f0d722ae25ff9325fc055
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.51 through to 5.15.59
stable releases.
Change-Id: I0e4917a3cd0c461730d8f7b1fb029878a5b7ff05
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
hwmon: (occ) Prevent power cap command overwriting poll response
hwmon (occ): Fix response length in checksum retry
Jae Hyun Yoo (1):
ARM: dts: aspeed: nuvia: Rename vendor nuvia to qcom
Change-Id: I9d31007d60111cc188530d07c289ec927424b47f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves OpenBMC to the latest SDK from Aspeed.
Note that a series of fixes were sent to Aspeed on top of the SDK
release to ensure the OpenBMC configuration continued to work. These
changes have been merged by Aspeed but do not appear in a SDK tag at
this stage. Also sent to Aspeed were some of the changes from the
OpenBMC branch.
Changes from Aspeed's new SDK:
Billy Tsai (1):
gpio: aspeed: Fix incorrect offset of read back register.
Chia-Wei Wang (3):
Merge branch pull request #10 into aspeed-dev-v2019.04
arm: aspeed: ast2600: Remove ASPEED_LOADERS
configs: aspeed: Remove legacy defconfig
Chin-Ting Kuo (10):
dts: aspeed: Create a device tree for DC-SCM solution
dts: aspeed: Add ast2600-dcscm device tree
spi-nor: Porting for S25HL series
dts: aspeed: DC-SCM early bring up
spi: aspeed: Fix bug when using 2Gb flash
dts: aspeed: dc-scm: Add support for external mux
spi_nor: Support s25hl without SFDP
mtd: spi: Support Gigadevice device with 64KB sector size
dts: aspeed: dc-scm: Extend bus-width to 4 for SPI1
spi-nor: Add fast read command for S25HL series flash support
Dylan Hung (5):
cmd/aspeed/nettest: apply addtional delay for RTL8211F
dts: aspeed: enable mac1 for ast2600-dcscm
cmd: aspeed: nettest: fix driving strength setting
cmd: aspeed: support ctrl+c to break dramtest loop
ram: aspeed: add AST2600 ODT configuration
Eddie James (2):
ARM: dts: aspeed: tacoma: Add eMMC nodes and parameters
ARM: dts: aspeed: rainier: Add eMMC nodes and parameters
George Hung (1):
ARM: dts: aspeed: add Quanta S6Q machine dts
Jammy Huang (11):
pinctrl: ast2600: Add support for secure-i2c
arm: dts: ast2600: Add definition for secure-i2c pinctrl
misc: dp: Support re-driver
misc: dp: Update dp-fw
misc: dp: Refine code
misc: dp: Update dp-fw
misc: dp: Fix black screen occasionally
misc: dp: Fix monitors black screen with 15m cable
misc: dp: Fix black screen occasionally
misc: dp: Improve compatibility
misc: dp: Improve compatibility
Joel Stanley (5):
ARM: dts: rainier: Enable ACRY and HACE
ARM: dts: tacoma: Enable ACRY and HACE
aspeed: Disable unused loaders, add STMICRO flash
aspeed: Sort dts files in makefile
as2600/scu: Fix printing of security info
Johnny Huang (4):
cmd: aspeed: otp: fix otp status polling
otp: update image checksum to SHA384
otp: add 'verify' sub-command
otp: add 'invalid' sub-command
Neal Liu (2):
arm: aspeed: ast2600: select USB2.0 device mode as default
arm: aspeed: ast2600: enable USB port B PHY clock
Peng Fan (1):
tools: imx image: fix write warning
Potin Lai (1):
ARM: dts: Aspeed: Add Bletchley dts
Tommy Huang (5):
cmd: aspeed: DP CTS command utility
cmd: aspeed: Update aspeed dptest default build config
cmd: dptest: Arrange tab align
cmd: aspeed: Fix the internal section compile fail
i2c: ast_i2c: Remove SCL direct drive mode
ryan_chen (4):
i2c:ast2600: add ast2600 new register mode driver
pcie:aspeed : update reset sequnce.
pcie:aspeed : fix two rc enable rc high config read timeout issue
pcie:aspeed : update perst sequence
Change-Id: I2b79d15f7016913cae3f2b1d9cf6ee143136aaf2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This removes support for the v1 OTP format and introduces v2, which uses
SHA384 checksums.
Johnny Huang (6):
socsec: add ecdsa sign helper
otp_info: update ast10xx header
otp: update otptool to v2.0.0
Merge branch 'develop'
update test case for 2.0.0
otptool: fix checksum compare
Change-Id: I049bd34898be912043e010ef39ff05a888a365da
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
There are a few 'matchers' statements specified in OWNERS files that
do not do anything. git doesn't track directories, so we cannot do
an 'exact' match on a directory. Switch these 'matchers' to be a
'partial_regex' so that any file included in these paths will match.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I47329241bc9e6eba6f4ecd1b92b7ebe5d7230939
|
|
Joel Stanley (2):
ftgmac100: Fail probe when NCSI selected but not enabled
config/ast-evb: Enable NCSI
Change-Id: I5ed0610738d83ad21a3a52956851d2dc938c1f1f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Potin Lai (4):
ARM: dts: aspeed: bletchley: change LED sys_log_id to active low
ARM: dts: aspeed: bletchley: disable GPIOV2 pull-down
ARM: dts: aspeed: bletchley: bind presence-sledX pins via gpio-keys
ARM: dts: aspeed: bletchley: update fusb302 nodes
Change-Id: I078921ad45431d82bc1a628311d3b9dec95c2cb5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Cédric Le Goater (1):
ARM: dts: aspeed: Add a palmetto board (AST2400)
Jae Hyun Yoo (2):
ARM: dts: ast2600-qcom-dc-scm-v1: enable HACE
board: Add initial version of Qualcomm DC-SCM V1 board
Change-Id: Ic4967aa383778b16224c06887467b74b51bbfc6a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Previously the FLASH_SIZE-based config tweaks had only been applied to
u-boot itself, leaving fw-utils built with a different default
environment that could end up replacing the original one with a
non-working bootcmd setting.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: I147a601d6a348f94b221459eabee4555dfed63c6
|
|
Might as well have it in one place instead of duplicating it between both.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: Id87649691c93d0dbdc08d2484ca59a85cb54a3eb
|
|
This includes security and bug fixes from the 5.15.44 through to 5.15.50
stable releases.
Change-Id: I8f44dfab06e5f75ce999fbdc8936945e483823fe
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Cédric Le Goater (3):
net: phy: ncsi: Add phy_interface_is_ncsi() helper
spi: aspeed: Use "jedec,spi-nor" compatible to count devices
ARM: dts: aspeed: Remove "spi-flash" compatible
Graeme Gregory (1):
ARM: dts: aspeed: add Qualcomm DC-SCM V1
Joel Stanley (4):
phy: Only create NCSI PHY when it's present
ARM: dts: ast2600: Consolidate A1 device tree
ARM: dts: ast2600: Consolidate A0 device tree
ARM: dts: ast2600: Consolidate NCSI device tree
Change-Id: I9b510afd3647afc66e99f2a64f0cb42a4aa65c15
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (2):
ARM: dts: Rename Rainier to P10 BMC
ARM: dts: ast2600: Fix indentation
Change-Id: I732324d89b7c0f731160d69942051e4d4cadc778
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Howard Chiu (1):
configs: aspeed: Add SPL FIT image loading support
Change-Id: I913b63b740a98eb29c3ff1ea66d408f65d781169
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.42 and 5.15.43 stable
releases.
This bump also includes these three changes:
Cédric Le Goater (1):
ARM: dts: aspeed: ast2600-evb: Enable Quad SPI RX tranfers
Johnny Huang (2):
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
Change-Id: I0ce42d51f47a483fec65010b5e022a5a7275674c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
Joel Stanley (1):
iio: si7020: Revert "Remove reset in probe"
Change-Id: I61463092a96bd2d103b718c650436a97ced55dd6
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This contains a backport of the TPM TIS core from u-boot mainline, plus
a driver from Eddie that enables the I2C backend.
It fixes I2C support for the AST2600 and enables the TPM on IBM's
rainier platform.
A new AST2600 board 'ast2600-ibm' is added that contains some machine specific
code for performing TPM init. This board does not have a in-tree
defconfig, rather it will be selected by Yocto metadata. This allows us
to keep the number of defconfigs low while still having machine
specific customisation.
Eddie James (6):
tpm: core: Set timeouts before requesting locality
i2c: ast_i2c: Remove SCL direct drive mode
tpm: add support for TPMv2.x I2C chips
arm: dts: ast2600-rainier: Add NPCT75X TPM
board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers
arm: dts: ast2600: Add I2C pinctrl
Heinrich Schuchardt (1):
tis: fix tpm_tis_remove()
Ilias Apalodimas (1):
tpm2: Introduce TIS tpm core
Joel Stanley (2):
configs: ast2600: Remove redundant target option
configs: ast2600: openbmc: Add TPM TIS I2C support
Johannes Holland (1):
tpm: add #ifndef to fix redeclaration build errors
Simon Glass (1):
tpm: Add more TPM2 definitions
Change-Id: Ibd13e0b0a1920f344ead219894a264323f0b8cc5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
spi: fsi: Fix spurious timeout
spi: core: Display return code when failing to transfer message
Change-Id: I0e62d11debe2de27b35bed6250ff69934b551662
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port for AST2600 systems.
Change-Id: I82151eb409e48324607efd65f79fdbe4df36ced3
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
After updates Gerrit is now hosted at https://gerrit.openbmc.org.
Urls in the documentation are now updated to reflect this change.
Signed-off-by: Corey Hardesty <corey.hardesty@icloud.com>
Change-Id: I3a7f7d338ca1ce600ccf7b41fa03bd62007925ba
|
|
Eddie James (5):
leds: pca955x: Set blink duty cycle to fifty percent
leds: Ensure hardware blinking turns off when requested
iio: pressure: dps310: Refactor startup procedure
iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
iio: si7020: Remove reset in probe
Joel Stanley (1):
ARM: dts: aspeed: everest: Add SiLabs sensor
Change-Id: Ic39b7df5b06863aca8bfdc142b68e7400821d79a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Dan Carpenter (1):
hwmon: (nct6775) delete some extension lines
Denis Pauk (9):
hwmon: (nct6775) Use superio_*() function pointers in sio_data.
hwmon: (nct6775) Use nct6775_*() function pointers in nct6775_data.
hwmon: (nct6775) Support access via Asus WMI
hwmon: (nct6775) Add additional ASUS motherboards.
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
hwmon: (nct6775) add ASUS Pro B550M-C/PRIME B550M-A
hwmon: (nct6775) add ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-P
Dmitry Baryshkov (1):
hwmon: (nct6775) add PRIME B550-PLUS motherboard to whitelist
Eddie James (1):
fsi: occ: Prevent use after free
Graeme Gregory (1):
ARM: dts: aspeed: Add Nuvia DC-SCM BMC
Guenter Roeck (1):
hwmon: (nct6775) Fix crash in clear_caseopen
Howard Chiu (1):
ARM: dts: aspeed: ast2600-evb: Enable video engine
Joel Stanley (1):
net: ftgmac100: Disable hardware checksum on AST2600
Neal Liu (1):
ARM: dts: aspeed: Add USB2.0 device controller node
Oleksandr Natalenko (1):
hwmon: (nct6775) add Pro WS X570-ACE
Potin Lai (6):
ARM: dts: aspeed: bletchley: enable ehci0 device node
ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
ARM: dts: aspeed: bletchley: Enable mdio0 bus
ARM: dts: aspeed: bletchley: update gpio0 line names
ARM: dts: aspeed: bletchley: add pca9536 node on each sled
ARM: dts: aspeed: bletchley: add eeprom node on each sled
Zev Weiss (9):
hwmon: (nct6775) mask out bank number in nct6775_wmi_read_value()
hwmon: (nct6775) add support for TSI temperature registers
hwmon: (nct6775) Convert register access to regmap API
hwmon: (nct6775) Rearrange attr-group initialization
hwmon: (nct6775) Add read-only mode
hwmon: (nct6775) Convert S_I* permissions macros to octal
hwmon: (nct6775) Split core and platform driver
dt-bindings: hwmon: Add nuvoton,nct6775
hwmon: (nct6775) Add i2c driver
Change-Id: I19d22f9eea8b58f228852ec7a06891cf18f0295c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Zev Weiss (1):
ftgmac100: Use bus name in mdio error messages
Change-Id: Id63c80c5b4b95d8be6a50eec8bd67d22fc184bf7
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.37 through to
5.15.41 stable releases.
Change-Id: I71a4d8a46d18658311dc45fba02ffbeaf8069c0c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Zev Weiss (3):
aspeed: Fix typos in platform.h comments
pinctrl: ast2400: add support for RGMII1 and RGMII2
ARM: dts: aspeed: add Delta AHE-50DC BMC
Change-Id: I32f2d4dd7cfb7575579ea6089f54b57a8e7161e2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is a version of the CVE-2019-6260 "pantsdown" mitigations for the
v2019.04 u-boot branch. The SuperIO and debug UART backdoors can be
optionally enabled through u-boot build time configuration, but default
to disabled as long as your machine uses the common board_init.
These changes are relevant for the AST2400 and the AST2500 only.
If your machine relies on these features to boot, look at the options in
this patch:
https://lore.kernel.org/openbmc/20220504004739.15829-1-zev@bewilderbeest.net/
See this email for instructions on how to test:
https://lore.kernel.org/openbmc/CACPK8XfYuWT9Q5G_bo9AGugx-DcODDZ8xb39Sr+Sa8qWqVeW6A@mail.gmail.com/
Thank you to Zev for the work on this patch.
Zev Weiss (1):
aspeed: Disable backdoor interfaces
Change-Id: I4ebeae13047b8c32f2d9324d4ef9c6f98c6f4a60
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is v6 of the patchset to move to a spi-mem based driver. It
replaces the half out of tree driver previously used, and contains
support for the AST2400, AST2500 and AST2600.
https://lore.kernel.org/linux-mtd/20220503060634.122722-1-clg@kaod.org/
Thank you to Cédric for his hard work maintaining the SPI NOR driver and
reworking it to be a SPI mem driver.
Cédric Le Goater (9):
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
dt-bindings: spi: Add Aspeed SMC controllers device tree binding
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: aspeed: Add support for direct mapping
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Calibrate read timings
ARM: dts: aspeed: Enable Dual SPI RX transfers
Potin Lai (1):
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
Tao Ren (1):
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
Change-Id: Ia1bb25a455c0c6f0d8e92ff3241d60bd234a1fa2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The 32MB and 64MB NOR environments are the same configuration, so use
the one file.
The AST2600 NOR layout is the same size as the others so it can use the
same file too.
Change-Id: I6ee3fbf0d68104bcc684c2536fe85c5aec76c409
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
OpenBMC places kernel at offset 512 if the flash size is 32MB,
but it was defined as 1024 in the present defconfig.
This patch corrects the offset if the flash size is set to 32MB.
Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
Change-Id: I05749eda519cc1660921e111a36be74cb121fa68
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I746b04e1e36abaf2ff3852beb8a04535692442c1
|