Age | Commit message (Collapse) | Author | Files | Lines |
|
1. Add otptool.bbclass to create otp image.
2. Update u-boot recipe to "inherit otptool.bbclass" for
otp image creation in the u-boot tasks.
3. Update socsec tool for SPL and OTP image verification if
verify failed u-boot should be built failed.
4. Use OE logging utilities.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: I0ba5da4d112b49d182bdf2751614afe62850eac3
|
|
Warning message:
work/openbmc/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb:
URL: git://github.com/openbmc/linux;protocol=git;branch=dev-5.15
uses git protocol which is no longer supported by github.
Please change to ;protocol=https in the url.
Tested: build linux-aspeed repo and eliminate the warning message.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I00d55df9dd760a1cdef2f6b0db934c9a2cc8b7fa
|
|
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: If2b06db8d5ca3f07ff03b0c397e8476ec28587b1
|
|
OE convention (see OE-Core rev: f44bb4588) is for bitbake variables to
use braces and ordinary shell variables to not use braces.
Change-Id: I640076712f58d971b173849844215a64565a1d51
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OE provides utilities for both warning and error messages, so use them.
Change-Id: I7548e09e69015dda4043d5aaa00a0c869393c595
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
With the latest yocto subtree update, this function has been moved into
the global python package.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I60fd8a2160e45823065a9a28ae36af263baa15cb
|
|
Previously, the u-boot-fw-utils-aspeed-sdk build didn't take *.cfg files
in SRC_URI into account at all, leading to problematic mismatches
between fw_{set,print}env's configuration and that of u-boot itself
(such as discrepancies in their respective notions of what the default
environment should be).
With this change the fw-utils build uses the same do_configure as the
regular u-boot build, so the two packages can more easily be built with
a single consistent configuration.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: Ia83768597b6b75dc00425bdc23f216274d87e0ae
|
|
This includes security and bug fixes from the 5.15.15 through to
5.15.18 stable releases.
Change-Id: I71a0c4d8c134434725bba8e2a7deec37783550bc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (2):
USB: serial: pl2303: Add IBM device IDs
ARM: dts: aspeed: rainier and everest: Enable UHCI
Jiasheng Jiang (1):
fsi: core: Check error number after calling ida_simple_get
Joel Stanley (3):
fsi: scom: Fix error handling
fsi: scom: Remove retries in indirect scoms
ARM: configs: aspeed_g5: Add PL2303 USB serial driver
Change-Id: I8a39a2adc4ec761c910f8a675ac653b2ce739a3f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
In general, software such as openssl calculates digest(big endian) of input data and uses big-endian digest to sign for RSA signature creation.
However, AST2600 A1 only supports little endian. In other words, AST2600 A1 crypto hardware engine digest output is “little endian”.
That is why our SOCSEC tool reverse signature and digest to match the AST2600 A1 crypto engine design(little endian).
AST2600 A3 changed the design to support big endian. ASPEED recommends using big endian to remain compatible with general software tool design
and therefore SOCSEC tool does not need to reverse digest and signature.
Default to big endian for OpenBMC platforms as A3 is production silicon, and earlier revisions are not well supported.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: Iba46f704b86990d53937f104c3c601da5a3c111f
|
|
This makes the v2019.04-aspeed-openbmc branch the default for all aspeed
machines.
Existing machines have all modified their u-boot package to use the
older branch, so this patch should result in no change.
Change-Id: Ic4dd0bb973a16d3d658c340e7caf6a05128327bc
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This sets u-boot to the package containing the v2016.07-aspeed-openbmc
branch. This ensures there will be no change if the default changes in
the future.
Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This driver requires CONFIG_TCG_TPM and CONFIG_TCG_TIS_I2C.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: If461c2fec0874c09410388bcce7990334b81a726
|
|
This includes security and bug fixes from the 5.15.11 through to
5.15.14 stable releases.
Change-Id: I289d25f7f3d02010e6be586e2c992a8b88204a7c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Amir Mizinski (5):
tpm_tis: Fix expected bit handling
tpm: tpm_tis: Rewrite "tpm_tis_req_canceled()"
tpm: tpm_tis: Verify TPM_STS register is valid after locality request
tpm: tpm_tis: Add tpm_tis_i2c driver
tpm: Add YAML schema for TPM TIS I2C options
Andrew Geissler (2):
ARM: dts: aspeed: rainier: add reset-cause-pinhole
ARM: dts: aspeed: everest: add reset-cause-pinhole
Chen Jun (1):
tpm: add request_locality before write TPM_INT_ENABLE
Christophe Jaillet (1):
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
Howard Chiu (邱冠睿) (1):
hwmon: (pmbus) Add support for MPS Multi-phase mp5023
Joel Stanley (2):
ARM: configs: aspeed_g5: Add mp5023 driver
ARM: config: aspeed_g5: Add TPM TIS I2C driver
Patrick Williams (1):
tpm: fix NPE on probe for missing device
Change-Id: Ie6ef09e03df8bc44ef70d900a4fc3b874e1d6688
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
When using 64M flash, the config of u-boot CONFIG_ENV_SIZE and
CONFIG_ENV_OFFSET is wrong. The config file fw_env.config is wrong, too.
Modify them according to the 64M flash dts file.
Before correcting these errors, when we used setenv to set environment
variables in u-boot, we could not use fw_printenv to get them. The
reverse is also the same. Because they set different offset and size.
Tested:
1. Use commands in u-boot:
setenv test value
saveenv
After BMC starts, use fw_printenv can get "test=value"
2. Use the command to change the value of "test"
fw_setenv test v
We can get "test=v" in u-boot by printenv.
Signed-off-by: zhanghaicheng <zhanghch05@inspur.com>
Change-Id: I9eccf6abe743253b6f8c344a8b8648e68ab52019
|
|
Append tpm2 in MACHINE_FEATURES to enable related kernel configs
MACHINE_FEATURES:append = " tpm2"
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Ie6b50d81040de2863487cffc449193ec9462bf89
|
|
This includes security and bug fixes from the 5.15.6 through to
5.15.10 stable releases.
Change-Id: Ib4e8e69386ba6c7857c22d8b2fb063c9d8d03b36
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These are backports from the v5.17 aspeed pull request.
Ali El-Haj-Mahmoud (1):
ARM: dts: aspeed: Add TYAN S8036 BMC machine
Andrei Kartashev (2):
dt-bindings: vendor-prefixes: add YADRO
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
Eddie James (2):
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: p10: Add TPM device
Howard Chiu (1):
ARM: dts: aspeed: Adding Facebook Bletchley BMC
Jae Hyun Yoo (3):
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
Joel Stanley (3):
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: aspeed: Add secure boot controller node
ipmi: bt: Add ast2600 compatible string
Lei YU (2):
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: g220a: Enable secondary flash
Oskar Senft (1):
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
Quan Nguyen (2):
ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices
ARM: dts: aspeed: mtjade: Add uefi partition
Change-Id: I89371d3ab9c99415b3e971fbb62a6cad8b8e4b16
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
1. To fix python modules not found such as bitarray at do_compile task
, adds "DEPEND" to install dependencies.
2. Create a socsec.inc to place the common settings.
3. Create a socsec_1.0.0.bb to build socsec tool v1.0.0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Change-Id: I27a9216419555b58e7484e85506fa229f0e230b7
|
|
The defconfigs are regenerated using savedefconfig. No options are
changed.
An explanation as to why some are removed from the defconfig:
- ZBOOT_ROM_TEXT and ZBOOT_ROM_BSS default to 0x0 (and we odn't use
them)
- SECOMMP is now on by default
- BLK_DEV_BSG is now behind SCSI, which we do not enable
- I2C_MUX is selected by the MEDIA subsystem
- MCTP_LPC is gone
- NET_VENDOR_AURORA is gone
- PECI is not in the tree :(
- ASPEED_LPC drivers are enabled by default
The other options move their order but are still present.
Change-Id: Ib03b6dab4804e354629b9bf7f4e0951b6131462c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.15.1 through to
5.15.5 stable releases.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ibe8c433439b5863b0d49934d4d43b239bdc736d7
|
|
Billy Tsai (1):
irqchip/aspeed-scu: Replace update_bits with write_bits.
Dylan Hung (1):
mdio: aspeed: Fix "Link is Down" issue
Joel Stanley (2):
drm/aspeed: Fix vga_pw sysfs output
clk/ast2600: Fix soc revision for AHB
Change-Id: Idd8d89c4869faa8528f1c5066ec3ed467ea85911
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Oskar Senft (3):
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (nct7802) Make temperature/voltage sensors configurable
ARM: dts: aspeed: tyan-s7106: Update nct7802 config
Signed-off-by: Oskar Senft <osk@google.com>
Change-Id: I6dedace1a62f136c461ce6a207ef925d0bd072d1
|
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Chia-Wei Wang (2):
soc: aspeed: Add UART routing support
soc: aspeed: Fix UART routing driver
Change-Id: I4a6fc7ee06e7e32ef15ceba79d278869e6c6c42e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves the OpenBMC kernel to a v5.15 base. There are 73 patches in
the tree, not counting changes that were merged in v5.16 which have been
backported.
Andrew Jeffery (10):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ARM: dts: tacoma: Clean up KCS nodes
leds: pca955x: Make the gpiochip always expose all pins
leds: pca955x: Allow zero LEDs to be specified
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (8):
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
spi: fsi: Print status on error
spi: fsi: Fix contention in the FSI2SPI engine
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (4):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
ARM: dts: nuvoton: gbs: split SPI flash partition
ARM: dts: nuvoton: gbs: Change the name of the partitions
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: dts: ast2600evb: Enable EHCI controller
ARM: configs: aspeed: Add openbmc kernel options
ipmi: bt-bmc: Use registers directly
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
William A. Kennington III (1):
net: npcm: Support for fixed PHYs
Change-Id: I8c26f71ba75e4f8d8b5697b81f8c73c0d77aae8e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Patches from the v5.16 kernel relating to FSI, OCC and SBE FIFO.
Eddie James (7):
fsi: occ: Use a large buffer for responses
fsi: occ: Store the SBEFIFO FFDC in the user response buffer
docs: ABI: testing: Document the OCC hwmon FFDC binary interface
hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs
docs: ABI: testing: Document the SBEFIFO timeout interface
fsi: sbefifo: Add sysfs file indicating a timeout error
fsi: sbefifo: Use interruptible mutex locking
Change-Id: Iab76e0b1cf658334d8ab0f43bb6c3d1b8912f7a5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.14.11 through to
5.14.15 stable releases.
Change-Id: Ida64acaa1f9c7c26d987fa7979ef29320924f2f0
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Adriana Kobylak (1):
ARM: dts: aspeed: rainier: Add power-config-full-load gpio
Eddie James (1):
spi: fsi: Print status on error
Joel Stanley (2):
ARM: dts: aspeed: p10bmc: Define secure boot gpio
ARM: dts: aspeed: rainier: Remove remaining PCA955X_TYPE_GPIO
Change-Id: Ibbfc482ba2ee1a008006875d6065cc36d7c7da20
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (5):
ARM: dts: aspeed: Fix ADC iio-hwmon battery node name
ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification
ARM: dts: aspeed: everest: Add I2C switch on bus 8
ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device
ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms
Joel Stanley (1):
iio: aspeed_adc: Fix prescaler devres cleanup
Change-Id: Icd9903844c926c0d41d912716520eb3807c59039
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Zev Weiss (8):
hwmon: (pmbus/lm25066) Add offset coefficients
hwmon: (pmbus/lm25066) Adjust lm25066 PSC_CURRENT_IN_L mantissa
hwmon: (pmbus/lm25066) Avoid forward declaration of lm25066_id
hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff
hwmon: (pmbus/lm25066) Mark lm25066_coeff array const
hwmon: (pmbus/lm25066) Add OF device ID table
hwmon: (pmbus/lm25066) Support configurable sense resistor values
dt-bindings: hwmon/pmbus: Add ti, lm25066 power-management IC
Change-Id: I3bd76959963ad7de008197f7349c72b088eb1147
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Joel Stanley (1):
ipmi: bt-bmc: Use registers directly
John Wang (1):
ARM: dts: aspeed: fp5280g2: Use the 64M layout
Change-Id: Id6ec8571bee286cf56ab02bbf9c4b4d278b32426
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.14.7 through to
5.14.11 stable releases.
Change-Id: I4e3cbb74fe6204dd804c06a438e9a398f4808894
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Brandon Wyman (3):
hwmon: (pmbus/ibm-cffps) max_power_out swap changes
hwmon: (pmbus/ibm-cffps) Add mfg_id debugfs entry
hwmon: (pmbus/ibm-cffps) Use MFR_ID to choose version
Neal Liu (1):
usb: ehci: Handshake CMD_RUN instead of STS_HALT for Aspeed
Change-Id: I803024cd288339966162ac10fda501a6fb8beef8
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Move u-boot-aspeed-sdk to use u-boot.inc from poki instead our own. We
still need our own one for old u-boot-aspeed, so keep it as is.
Tested: Build image for AST2500-based machine with
u-boot-aspeed-sdk_2019.04, verified that it boots up and fw-utils
installed to the image properly.
Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Change-Id: Ia5fecdedc94e9550196420884a727e7d87b313d4
|
|
Joel Stanley (1):
aspeed/hace: Reset when error occurs
Change-Id: I10ec988f7b0b01aa76a4338ef095fbe80b4229ec
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Andrew Jeffery (2):
leds: pca955x: Make the gpiochip always expose all pins
leds: pca955x: Allow zero LEDs to be specified
Ben Tyner (3):
ARM: dts: rainier: Define name for gpio line Q2
ARM: dts: everest: Define name for gpio line Q2
ARM: dts: everest: Define name for gpio line B6
Change-Id: Ibcfc7938deeef2003344a6ae460f0bfc9be3cca6
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These are backports of patches that are queued for v5.16.
Billy Tsai (14):
iio: adc: aspeed: set driver data when adc probe.
dt-bindings: iio: adc: Add ast2600-adc bindings
iio: adc: aspeed: completes the bitfield declare.
iio: adc: aspeed: Keep model data to driver data.
iio: adc: aspeed: Restructure the model data
iio: adc: aspeed: Add vref config function
iio: adc: aspeed: Use model_data to set clk scaler.
iio: adc: aspeed: Use devm_add_action_or_reset.
iio: adc: aspeed: Support ast2600 adc.
iio: adc: aspeed: Fix the calculate error of clock.
iio: adc: aspeed: Add func to set sampling rate.
iio: adc: aspeed: Add compensation phase.
iio: adc: aspeed: Support battery sensing.
iio: adc: aspeed: Get and set trimming data.
Eddie James (8):
dt-bindings: leds: Add retain-state-shutdown boolean
leds: leds-core: Implement the retain-state-shutdown property
leds: pca955x: Clean up code formatting
leds: pca955x: Add brightness_get function
leds: pca955x: Implement the default-state property
leds: pca955x: Let the core process the fwnode
leds: pca955x: Switch to i2c probe_new
ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
Change-Id: I573e724eccbd79f000704ea893007447d6b2934f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.14.4 through to
5.14.6 stable releases.
Change-Id: I26ecac572d91d27c3bb709cadded16e77b9f928d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (4):
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: rainier: Add eeprom on bus 12
ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7
Change-Id: I95950704b432b53388d20cef7f5917d6fc46f904
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.14.1 through to
5.14.3 stable releases.
Change-Id: I9fddf1581b0562c52fd378ed9581e338d0b96d3e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves the OpeNBMC kernel to a v5.14 base. There are 78 patches in
the tree, plus a the MCTP core and device tree changes that were merged
in v5.15 which have been backported.
Andrew Jeffery (11):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node
ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding
ARM: dts: aspeed: p10bmc: Enable KCS channel 2
ARM: dts: tacoma: Clean up KCS nodes
B. J. Wyman (2):
ARM: dts: aspeed: Rainier remove PSU gpio-keys
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
spi: fsi: Reduce max transfer size to 8 bytes
dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible
fsi: occ: Force sequence numbering per OCC
hwmon: (occ) Remove sequence numbering and checksum calculation
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Isaac Kurth (1):
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: dts: ast2600evb: Enable EHCI controller
ARM: dts: aspeed: rainier: Enable earlycon
ARM: configs: aspeed: Add openbmc kernel options
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
William A. Kennington III (1):
net: npcm: Support for fixed PHYs
Change-Id: I315000ab63c3f6a34d99cf25e366fa0781c85d46
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The clk patch is a prerequisite for the backport of the ADC patches.
The ADC patches are not yet merged, but are under active review and are
expected to be merged in v5.16. Version 6 of the patchset was merged.
Billy Tsai (14):
iio: adc: aspeed: set driver data when adc probe.
dt-bindings: iio: adc: Add ast2600-adc bindings
iio: adc: aspeed: completes the bitfield declare.
iio: adc: aspeed: Keep model data to driver data.
iio: adc: aspeed: Restructure the model data
iio: adc: aspeed: Add vref config function
iio: adc: aspeed: Use model_data to set clk scaler.
iio: adc: aspeed: Use devm_add_action_or_reset.
iio: adc: aspeed: Support ast2600 adc.
iio: adc: aspeed: Fix the calculate error of clock.
iio: adc: aspeed: Add func to set sampling rate.
iio: adc: aspeed: Add compensation phase.
iio: adc: aspeed: Support battery sensing.
iio: adc: aspeed: Get and set trimming data.
Dmitry Baryshkov (1):
clk: divider: add devm_clk_hw_register_divider
Eddie James (4):
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: rainier: Add eeprom on bus 12
ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7
Joel Stanley (1):
Revert "block: nbd: add sanity check for first_minor"
Michael Walle (1):
clk: divider: add devm_clk_hw_register_divider_table()
Change-Id: I120d78fa77df01e239eeb67b3209cebfe2973491
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.61 through to
5.10.65 stable releases.
Change-Id: I754ab3d2c0ede419f082d42e245c9e8dd27166b5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e7624c ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
As the AST2500 uses the GFX device, and the uart-renderer process uses
fbterm to display to the FB device, we want CONFIG_FB=y for that system.
This is harmless for kernels that do not have the offending commit.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I57213b60f7fc06c89112a9825c7ed8ed7ff5e298
|
|
Upstream yocto moved the tune files under architecture subdirectories
so need to adjust our includes of them.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I442f1403a869a117244461c8f94f940cfe7c08cd
|
|
Building the SPL and "silently" leaving it unsigned gives us a build
that cannot be booted on systems that have secure-boot enabled.
Change-Id: Ie788a04ef35c7031897a2bfa7d348caa4292305d
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
Include the socsec-sign class after the conditional assignments to
ensure the values we might assign are considered by the functions of
socsec-sign.
Without this, u-boot-aspeed-sdk do_deploy logs show:
```
DEBUG: Executing python function sstate_task_prefunc
DEBUG: Python function sstate_task_prefunc finished
DEBUG: Executing shell function do_deploy
Copying u-boot-nodtb binary...
Warning: Invalid socsec signing key - SPL verified boot won't be available
```
Adjusting the location of the include gives:
```
DEBUG: Executing python function sstate_task_prefunc
DEBUG: Python function sstate_task_prefunc finished
DEBUG: Executing shell function do_deploy
Copying u-boot-nodtb binary...
check header PASS
Found PEM header at position 381
check integrity PASS
```
Change-Id: I15cac4c315a6ceaeb69b0c02ba0b7d05e54f6e15
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
We've typically kept these LAYERSERIES_COMPAT to 2 releases: the current
and the upcoming. Remove 'gatesgarth' is it is now 2 releases back.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5e812a94fed1738898af75c0fdee81996a5bbf20
|