summaryrefslogtreecommitdiff
path: root/meta-bytedance/meta-g220a/recipes-phosphor
AgeCommit message (Collapse)AuthorFilesLines
2023-10-11treewide: clean up webui selectionPatrick Williams1-1/+0
The webui-vue package is now enabled by default. Clean up all the meta layers to clean up the explicit enablement. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
2023-07-20ipmi-fru-parser: srcrev bump 06514028f8..7153343816Andrew Geissler1-4/+2
Patrick Williams (6): clang-format: copy latest and re-format writefrudata: remove vla strgfnhandler: suppress unused parameter warnings frup: suppress stringop-truncation warning scripts: accept absolute paths to YAML build: enable meson builds build: install strgfnhandler into ipmi-providers dir Vernon Mauery (1): Set new maintainer as Patrick Williams Willy Tu (1): fru-parser: Remove the use of mktime Switch to Meson. Change-Id: Iec9c41cc17a72f84248b8cd75f70353e053f17e2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-05-12Revert "Add socket-id for the first console"Andrew Jeffery1-1/+0
This reverts commit ec7cab9378f548e94ee4af83946b2583d1fc7194. ec7cab9378f5 ("Add socket-id for the first console") was only a partial fixup of the obmc-console configurations found in the tree. For historical reasons not all platforms that support multiple consoles install a client configuration file for all consoles. Instead they relied on some default behaviour that was removed in obmc-console's 4e7186918599 ("Fixed broken dbus interface for multiple consoles"). Applying the configuration changes in the manner of ec7cab9378f5 ("Add socket-id for the first console") resulted in an asymmetric configuration between the client and server, breaking some SSH SOL instances. As of ae2460d0b8e8 ("obmc-console: Provide a default value for `console-id`.") in obmc-console the requirement to specify `socket-id`[^1] is lifted. Instead, the configuration can choose to override a default value. This restores the original behaviour and unbreaks SSH SOL. [^1]: Now an alias of the `console-id` configuration key Websocket and IPMI consoles remain broken. A fix is under development that also takes a proper approach to supporting multiple consoles in bmcweb, and the same solution pattern can be applied in ipmid. More discussion of the problems involved can be found here: https://amboar.github.io/notes/2023/05/08/happenings-in-obmc-console.html Change-Id: I274284c791758f336da6d6301dc523bac2b5dd69 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2023-04-21Add socket-id for the first consoleNinad Palsule1-0/+1
This drop adds socket-id for first console. This was left out before but with the new design this parameter is required and enforced by obmc-console code. It is decided to set "socket-id = console0" initially because that is the current path used by bmcweb but in future you can change this value to whatever is appropriate. The console information is now available through the DBUS interface. Each console server register it's object path on DBUS. The leaf node of the object path is used to create a console path. For example in the following console0 the leaf node "console0" is used to make up the console path and the GUI will use console path "/console/console0" to connect to the console. busctl tree xyz.openbmc_project.Console.console0 `-/xyz `-/xyz/openbmc_project `-/xyz/openbmc_project/console `-/xyz/openbmc_project/console/console0 Here is a discord thread where new design was discussed. https://discord.com/channels/775381525260664832/1083551792094249051 Tested: Tested on the rainier system. Related commits: 1) phosphor-dbus-interface: https://gerrit.openbmc.org/c/openbmc/phosphor-dbus-interfaces/+/61486 2) obmc-console: https://gerrit.openbmc.org/c/openbmc/obmc-console/+/62496 3) bmcweb: https://gerrit.openbmc.org/c/openbmc/bmcweb/+/62525 Change-Id: I5fd06f3aac69872a3e5032d592a9b59711795cfe Signed-off-by: Ninad Palsule <ninadpalsule@us.ibm.com>
2023-04-14meta-bytedance: me-time-sync: fix shellcheck issuesPatrick Williams1-5/+5
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I49f7334245394be03e77cb455d9e4d461fdb5705
2023-03-27treewide: switch '/usr/share' to datadirPatrick Williams3-5/+5
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I8ea79d284356629f5b7b24ad3a99336e9e2e297e
2022-06-21phosphor-host-ipmid: srcrev bump 33d90e182d..0e7a8af0e5Andrew Geissler1-4/+4
Harvey.Wu (2): dbus-sdr: fix SEL record Generator ID to fit SPEC dbus-sdr: fix the vector size in sdrWriteTable and sdrStatsTable Jian Zhang (1): Add data types to Value to extend setDbusProperty Vernon Mauery (1): fix header install Willy Tu (4): cleanup: Remove all warning errors for the Meson build support build: Add meson build for phosphor-host-ipmi build: move all shared_library/module to library with version suffix build: Remove dynamicsensor library if it is not enabled Change-Id: I92503c6625d1ec2bf88c0a28afac9b4eeb8fbd75 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Willy Tu <wltu@google.com>
2021-12-08bytedance: g220a: Modify power-control configLotus Xu1-9/+44
Tested: Test on qemu ipmi chassis status cmd work correct Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I60d20bf58c21b5c81d5fbad7649c1e2b43351392
2021-11-04bytedance: g220a: uart: Update the uart-routing pathLei YU1-8/+8
With the upstream aspeed-uart-routing changes, the user space interface needs to be updated to use the new path. Tested: Verify the SOL is working fine on g220a. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I4313d240b2778ef8070214eb19029b559588bcea
2021-10-25bytedance: g220a: Remove node managerLei YU3-59/+0
The node manager is maintained in https://github.com/Intel-BMC/node-manager and it is not buildable with latest OpenBMC. The OpenBMC guideline[1] and the repotest[2] does not accept pathces in machine layers, so the patches to node-manager are not accepted. Remove the recipe for now, otherwise the build fails. [1]: https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md [2]: https://github.com/openbmc/openbmc-build-scripts/blob/master/build-setup.sh#L141 Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I735f5b4d9b1cfa0ff4c0e47d349f99e847c0a7bd
2021-08-20bytedance: g220a: Fix the dest dir for x86-power-controlJohn Wang1-1/+1
Fix the environment variables of the destination directory Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: Iffd1ca218da9d9aeaff560ecf96c8b8267702994
2021-08-20bytedance: g220a: ipmi: Set G220A Device ID ConfigureHenry Tian1-0/+2
Config additional device Support and manufacturer ID Tested: ipmitool mc info and ipmitool fru Signed-off-by: Henry Tian <tianxiaofeng@bytedance.com> Change-Id: I08488b2c9f19e086eee8082242a9efdb96957e61
2021-08-20bytedance: g220a: ipmi: Add total power sensorLei YU2-3/+25
It adjusts some sensors' number and adds the total power sensor. Tested: Verify the "Total_Power" is shwon in ipmi sensor list. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I334fe602f949bbd95cb59bcdfba390ea5147df33
2021-08-20bytedance: g220a: virtual-sensor: Add associationsLei YU1-0/+72
Add virtual sensor's associations so that the sensors could be shown in Redfish and WebUI. Tested: Verify the Total_Power is shown in Redfish as below $ curl -k -H "X-Auth-Token: $token" https://${bmc}/redfish/v1/Chassis/G220A/Sensors/Total_Power { "@odata.id": "/redfish/v1/Chassis/G220A/Sensors/Total_Power", "@odata.type": "#Sensor.v1_0_0.Sensor", "Id": "Total_Power", "Name": "Total Power", "Reading": 514.0, "ReadingRangeMax": null, "ReadingRangeMin": null, "ReadingType": "Power", "ReadingUnits": "W", "Status": { "Health": "OK", "State": "Enabled" } } Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I0c9c84917364cad701f00fc3041d427a6e8750bc
2021-08-20bytedance: g220a: Add VR related virtual sensorsLei YU1-0/+292
Add below virtual sensors based on VR sensors: P0_DIMM_VR_Pwr = CPU0_DIMM_VR_0_Input_Power + CPU0_DIMM_VR_1_Input_Power P1_DIMM_VR_Pwr = CPU1_DIMM_VR_0_Output_Voltage + CPU1_DIMM_VR_1_Output_Voltage CPU0_VR_Pwr = CPU0_VR_0_Input_Power + CPU0_VR_1_Input_Power + CPU0_VR_2_Input_Power CPU1_VR_Pwr = CPU1_VR_0_Input_Power + CPU1_VR_1_Input_Power + CPU1_VR_2_Input_Power CPU0_VR_Temp = max(CPU0_VR_0_Temperature, CPU0_VR_1_Temperature, CPU0_VR_2_Temperature) CPU1_VR_Temp = max(CPU1_VR_0_Temperature , CPU1_VR_1_Temperature, CPU1_VR_2_Temperature) P0_DIMM_VR_Temp = max(CPU0_DIMM_VR_0_Temperature, CPU0_DIMM_VR_1_Temperature) P1_DIMM_VR_Temp = max(CPU1_DIMM_VR_0_Temperature, CPU1_DIMM_VR_1_Temperature) Tested: Verify the above sensors appear on DBus and the values are expected. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I9412e7da1a147b64cb43a5f9981042623cfb6423
2021-08-20bytedance: g220a: Add virtual-sensor packageLei YU3-0/+41
Add phosphor-virtual-sensor pakcage and configure it to enable "total_power" sensor that is the sum of PSU0/1's input power. Tested: Verify the Total_Power sensor is on DBus and the value is the sum or PSU0 and PSU1's input power. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: Ie8f61800299bef01a8bb74256c24d1f0a90df258
2021-08-17Fix path to udev rules filesAnton Blanchard2-3/+3
Use nonarch_base_libdir instead of base_libdir, because the files are always in /lib/udev/rules.d/. On ppc64le base_libdir is lib64, and the files end up in the wrong spot. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Change-Id: I3c24dae293f4166f1ed1826d09d4bde7cd7d0357
2021-08-13meta-bytedance: Cleanup for Yocto override syntax changeLei YU14-30/+30
convert-overrides.py meta-bytedance git grep -l _g220a -- meta-bytedance | grep ".bb" | \ xargs sed -i 's/_g220a/:g220a/' git grep -l _u-boot -- meta-bytedance | xargs sed -i \ 's/_u-boot/:u-boot/' Tested: $ git grep "_[a-z0-9_/-]*[ :]" -- meta-bytedance | grep ".bb" meta-bytedance/meta-g220a/recipes-phosphor/chassis/x86-power-control_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/configuration/entity-manager_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/console/obmc-console_%.bbappend:do_install:append() { meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend:do_install:append(){ meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-kcs_%.bbappend:do_install:append() { meta-bytedance/recipes-core/systemd/systemd-conf_%.bbappend:do_install:append() { meta-bytedance/recipes-core/systemd/systemd_%.bbappend:do_install:append () { Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I26fb4c52012ee407ceb26c5a4120bf7b0b7a165a
2021-07-14bytedance: g220a: Add some sensors in yamlLotus Xu1-25/+509
Tested: Run ipmitool sensor list and verify the output is as expected. Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: Ibd81144adf8cb1477a8963cc3b8331b72c1a928b
2021-07-14bytedance: g220a: Add retry for me-time-syncLotus Xu1-1/+8
ipmb may not be ready for communication when me-time-sync start. Add some retry so that the time could be synced. Tested: Test 10 times, me-time-sync can work well Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I93343d2ac17fc13b1d094bf05f424d9cb54cfa3f
2021-07-02bytedance: g220a: node-manager: Remove total power sensorLei YU2-0/+39
The Total_Power sensor is not available on g220a system, add patch to remove it. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: Ibc70bec3d56b13740d3f17a666a8d0b0fa7c8429
2021-07-02bytedance: g220a: Enable phosphor-node-manager-proxyLotus Xu3-5/+30
Tested: Verify the CPU_Power and Memory_Power sensors are OK. Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I13fde13adc4062d5586167e411c129a986e3ad76
2021-05-24bytedance: g220a: Add power configJohn Wang2-0/+22
Add the power related config to enable power on. Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I3912fc603cf249bb2a1f48f69b7e14d458a6e0f1
2021-05-24bytedance: g220a: Enable ipmi interface eth1 and kcs4Lotus Xu5-0/+90
Tested:now we can see ipmi-kcs4 and eth1 Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I85166e66c0b37a7b5b3f5b8387b6056afc66e1cd
2021-02-23bytedance: g220a: hostlogger: Modify the uart instanceJohn Wang1-0/+1
Although hostlogger does not read the serial port, its systemd unit depends on the obmc-console and waits for the obmc-console of the specified serial port instance, which is vuart by default, ttyS2 on the g220a Tested: journalctl |grep VUART, no realted log Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I4136e6f376e71d3590ab2a787784446bcc7647df
2021-01-12bytedance: g220a: Remove the local patchJohn Wang1-2/+0
This patch is for phosphor-ipmi-host (From meta-bytedance rev: 588f458cf553f84e1cc2cc9e7dca07ed6ebd3d86) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I41a0c113ec6853f8a49ac1664c66595419b570e8 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a:read eeprom mac addrLotus Xu1-0/+1
read a byte at one time eg: for the first byte i2cset -y 1 0x50 0x00 0x00 i2cget -y 1 0x50 (From meta-bytedance rev: 6389a4f03a518e49241d13843cf005f4a85d7cc8) Tested: Verify the eeprom mac addr can be read use `fw_printenv`,`ip a` can read device mac addr Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com> Change-Id: I5fbf28e5bb3bb2ccc2a074388f4166e35da48afc Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Enable swampd tuning modeJohn Wang2-0/+19
Do not enter the failmode if a temperature sensor's value is NAN, It's useful for debug. We always want the pid-controler to run, when debugging. (From meta-bytedance rev: ae79ff9e289c85498e656172e99d44b11d969109) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I957528b2e2f336bdf3abbd78ec105bdc249e3716 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Enable webuiJohn Wang1-1/+2
Tested: Login in the webui, it works. (From meta-bytedance rev: 69a07b424834dc1f78046177c1314988812e27e9) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I2c89ce0cddfb0f68b788b855b67cbc56e321c3f4 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Enable ipmiJohn Wang7-0/+486
Tested: Run ipmitool fru print 0 and ipmitool sensor list, the output is as expected. (From meta-bytedance rev: 9e8a65aa85782b09f21fda3df0f502f6037e0f02) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I0ab25c386a418d039f05a4c4e96553152322194f Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31meta-g220a: Add me-time-syncLei YU4-0/+58
g220a BMC needs to get time from ME on start. Add me-time-sync package that fetches time from ME via ipmb, and set the time to BMC via `date` command. Tested: Verify the time is set on BMC boots (From meta-bytedance rev: c8640d007d25676261acc04317e5612269bd3ed5) Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I0e7f1d249cf743e3477843a67a6d2e6250c43aa6 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Enable ipmbLotus Xu2-0/+18
Tested : we can see /dev/ipmb-4 on g220a Use `busctl call xyz.openbmc_project.Ipmi.Channel.Ipmb \ "/xyz/openbmc_project/Ipmi/Channel/Ipmb" org.openbmc.Ipmb \ sendRequest yyyyay 0x01 0x0a 0x00 0x48 0` to get ME time correctly (From meta-bytedance rev: 58c6841aee1bd93c1070401ce7ca589367b8e6d0) Signed-off-by: Lotus Xu <xuxiaohan@bytrdance.com> Change-Id: Ic45173405ec9cd1806b5caa7a5081b6ed0d8fc3e Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Add sol configJohn Wang3-0/+37
Tested: ssh -p 2200, SOL works well. (From meta-bytedance rev: 1f40f6da4fc2e00fc06128ae6ba7dd1f045c8a84) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I2abd1e11c5158da887ac382bb2a98f94d85a4749 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-31bytedance: g220a: Add configurationsJohn Wang2-0/+2526
(From meta-bytedance rev: aec4880792267c1d8a00ba8a77b3fd23640691f3) Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Change-Id: I729b66aa82c4bde434879e9ef696c03d4015c624 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 17:33:41 +0300