summaryrefslogtreecommitdiff
path: root/meta-ibm
AgeCommit message (Collapse)AuthorFilesLines
2022-04-12meta-ibm: enable side switch feature on IBM systemsAndrew Geissler2-0/+5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I2887152b9451e8f0d812ba6cc5cf20f0ab61f38a
2022-04-12treewide: Update BB_DISKMON_DIRS useGeorge Liu3-12/+12
Per [1][2], Yocto is starting to deprecate ABORT and has replaced the "ABORT" action in BB_DISKMON_DIRS entries with "HALT". 1. https://wiki.yoctoproject.org/wiki/Inclusive_language 2. https://git.yoctoproject.org/poky/commit/?id=4f77505d94a8f6260933f457e9848d1d2fa98ce5 Tested: Built obmc-phosphor-image successfully and eliminate the following warnings: ``` WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to "HALT", update configuration ``` Signed-off-by: George Liu <liuxiwei@inspur.com> Change-Id: If57d0ded9fac41e23b31b01e2a0e309ac7388148
2022-04-09ibm-logging: srcrev bump e841b05fc7..c07636205eAndrew Geissler1-1/+1
Patrick Williams (1): sdbusplus: object: don't use 'bool' argument constructor Change-Id: I59cee1db5bd10776d6f49ad58056e008d7409fa7 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-04-08phosphor-state-manager: bump and multi host/chassis supportAndrew Geissler1-2/+2
phosphor-state-manager: srcrev bump 1ab2b6cea6..211d972d75 Adriana Kobylak (1): chassis: Monitor the PowerSystemInputs for power status Allen.Wang (2): host-state-manager: Add multi-host support chassis-state-manager: Correct poweroff state Unit Andrew Geissler (2): ensure bmc-state-manager stays in quiesce state generate bmc dump on monitored systemd target fail Brandon Wyman (1): Correct pinhole reset logic for chassis state Mike Capps (1): Set Critical severity for Blackout errors Patrick Williams (7): filesystem: use non-experimental version meson: remove stdc++fs dependency meson: add subproject wraps for current dependencies sdbusplus: object: don't use 'bool' argument constructor meson: add missing dependencies and wraps crit-service: update defaults for templated Host/Chassis sched-host-tran: support multi-host Potin Lai (3): chassis-state-manager: Add multi-chassis support discover-system-state: add multi-host support host-state-manager: fix host0 failure with reading wrong object path shamim ali (1): power-on-hours: ensure not incremented when system off Some commits went into phosphor-state-manager support that starts the framework to support multiple chassis and hosts within a system. This commit templates both the host and chassis services. Change-Id: I19764aa0c625d4d28d8d0e672658f1a3910335af Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2022-03-31meta-ibm: network: Split ncsi-netlink serviceEddie James8-52/+71
Since P9 systems need only to stop the link failover, and P10 systems need only to set the gigabit link speed, split the nsci-netlink service into two and make it per-interface. Use the systemd network check to make sure the link is up first. Use a helper script to fetch the ifindex for the network interface Signed-off-by: Eddie James <eajames@us.ibm.com> Change-Id: I6558787a2234575b528864bb71705964a63c0498
2022-03-24meta-ibm: Remove Power.Cap hardcoded rangeChris Cain1-0/+8
The powercap range is currently hardcoded by mrw-override-settings.yaml This commit will remove the hardcoded range and allow the full range of values to be set. The actual limits are available via dbus which can be used to validate the user power cap. Change-Id: I71e6009d5bc288c0d8480db26ce9e6782bdbd167 Signed-off-by: Chris Cain <cjcain@us.ibm.com>
2022-03-23phosphor-led-manager: automatically deduce use-{json,yaml}Patrick Williams1-1/+1
New systems should be using the 'use-json' model by default, but it currently requires a bbappend in order to enable it. Automatically detect based on the PREFERRED_PROVIDER of virtual/...-config-native if the intended use is JSON or YAML. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ie674d1b901395b4fd41838b6e978ca1ff00b0277
2022-03-21Move Palmetto and Romulus from webui to webvueAbhishek Patel2-2/+2
Palmetto and Romulus were using phosphor-webui. phosphor-webui built on AngularJS, and AngularJS goes End of Life December 31, 2021. So Move Plametto and Romulus to use webui-vue. webui-vue is a modern replacement for phoshor-webui. Weui-vue is built on vue.js, uses Redfish, and has additional features like - Ability to easily theme to meet brand guidelines - Accessibility - Full Redfish - Improved user experience based on user feedback - Language translation-ready - Modern front-end framework with an active community and future development roadmap Tested: manually tested on Palmetto and Romulus system. Able to log in into the system using the latest webui-vue. Able to retrieve dump log and another log, all basic functionality is working. Signed-off-by: Abhishek Patel <Abhishek.Patel@ibm.com> Change-Id: I883a84552383f3d7f94d9227a11fc7410bc43ec5
2022-03-17sensors:p10bmc:Add power-supply temperatureBrandon Wyman8-10/+90
Add the power supply temperature readings to the hwmon configuration and the Rainier and Everest assocation files. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Change-Id: I00e7fde4a58da553b9374733b22b8608d0c9da41
2022-03-11meta-ibm: set critical services for IBM systemsAndrew Geissler2-0/+54
This takes the default critical services list from meta-phosphor and appends on extra services IBM is interested in. Ideally, there would be an easy way to just append an extra file to the command line but this is going to need some more thought. For now, just override the entire file. Tested: - Booted witherspoon up in QEMU and verified new json file was loaded and that stopping one of the new critical services resulted in a dump, error log, and BMC Quiesced state. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Icf5db5331072cbcbd0359e0b789b664e31423124
2022-02-27meta-ibm:p10bmc: Print FRU info using ipmitoolShantappa Teekappanavar4-0/+1983
This commit adds p10bmc specific configuration files to display CPU and DIMM FRU information. Without these configuration files the default phosphor recipe configuration files are used, and we do not get FRU info for all configured CPUs and DIMMs. The changes are meta-ibm specific, the image was built and tested against our simulation model. Signed-off-by: Shantappa Teekappanavar <sbteeks@yahoo.com> Change-Id: I60dd8ce05941105dfaf6b5e67fa8c7b0bb06534a
2022-02-26treewide: support yocto kirkstone releasePatrick Williams3-3/+3
* Deprecate N-1 release (hardknott). * Enable N+1 release (kirkstone). Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
2022-02-23meta-ibm: Remove setting default power mode and IPS parmsChris Cain1-36/+0
The power_mode and power_ips dbus objects are being consolidated and moved under the org.open_power.OCC.Control service. Their default values will now be set via entity-manager. Verified on Everest hardware. Change-Id: Ibfa1e55126862db3521855ad0743a1423e555dac Signed-off-by: Chris Cain <cjcain@us.ibm.com>
2022-02-23meta-ibm: p10bmc: Add opkg to RDEPENDS:${PN}-extrasAndrew Jeffery2-1/+3
Providing `opkg` in the image allows us to easily install packages after-the-fact, usually to debug systems in the lab. This is not a mechanism for providing firmware updates. No specific configuration is supplied to enable its use, and hosting of package archives is left as an exercise to the user. That said, bitbake generates its own package archive in the course of creating the output image. It also provides a `package-index` target, which after execution, allows you to expose the archive with no more work than: ``` $ python3 -m http.server --directory tmp/deploy/ipk 8080` ``` The addition of opkg with the chosen options increases the uncompressed filesystem size by 3855360 bytes (~3.68MiB). Change-Id: I7731a4ebe08249e2216e8ca1984f8e8d87558687 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-02-22treewide: remove MAINTAINERSPatrick Williams1-45/+0
The MAINTAINERS files are no longer used and are out of date (references to IRC still exist in most of them). Remove them and rely on the OWNERS exclusively. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
2022-02-22meta-ibm: enable chassis power status checkAndrew Geissler1-0/+5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I7a4e86c61417f006e5ba218e3e5862dce3cd9e9a
2022-02-19meta-ibm: romulus: Fix QA warningsPeter Foley2-2/+2
e.g. WARNING: /home/peter/openbmc/meta-ibm/meta-romulus/recipes-phosphor/occ/romulus-occ-control-config-native.bb: QA Issue: romulus-occ-control-config-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: openpower-occ-control.bbclass [native-last] WARNING: /home/peter/openbmc/meta-ibm/meta-romulus/recipes-phosphor/logging/romulus-phosphor-logging-callouts-native.bb: QA Issue: romulus-phosphor-logging-callouts-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-logging.bbclass [native-last] Signed-off-by: Peter Foley <pefoley@google.com> Change-Id: I31be11e264e1701215d2eadd28dc2249153a5d61
2022-02-19meta-ibm: Disable Mutual TLSAli Ahmed1-0/+4
For PowerVM, Mutual TLS has no current use case. Disabling mTLS auth by setting meson build option to disabled. Note, bmcweb can still use mTLS auth to connect with LDAP server; however for this use case the bmcweb user must auth in another way. Signed-off-by: Ali Ahmed <ama213000@gmail.com> Change-Id: I35adaeb1b6318d5f1de619509e05ae49970d8486
2022-02-19ibm: Add myself as a reviewer for meta-ibm kernel changesJoel Stanley1-0/+5
Match on everything under meta-ibm/recipes-kernel. Change-Id: I56a2b578d1cb05ab7a2f3be9bb434a695e57b4f3 Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-19meta-ibm meta-openpower: OWNERS, MAINTAINERS updateBrad Bishop2-2/+0
It's been a pleasure working with the community on these bitbake layers over the years. The other maintainers have been doing all the work for awhile now so it's time to make it offical. Change-Id: I0f8390417294cb82575aba87b5c0e7bd7528d4c1 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2022-02-18treewide: fix append/remove directivesPatrick Williams4-21/+21
As mentioned by I970e06ca6f9d0a9792af122eb25da1bb9a06f058, append and remove directives with '+=' are no longer valid Yocto syntax and raise a warning. See https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n40 One interesting caveat has to do with the difference between "append" and "+=". foo:append = "a" foo:append = "b" Results in `foo = "ab"`, but foo += "a" foo += "b" Results in `foo = "a b"`. When `:append +=` is used it has behavior like the `+=` operator. Therefore, in some cases we need to insert additional whitespace after the `:append = "` to ensure concatenation behaves as expected. I've manually reviewed the results to ensure there is no ill side-effects from an additional space potentially being added. Fix up the entire tree with the following one-liner (and similar for `remove`): git ls-files -- ':!:poky/**' ':!:meta-security/**' \ ':!:meta-raspberrypi/**' ':!:meta-openembedded/**' \ | grep "\.bb" | xargs grep -l ":append.*+=" \ | xargs sed -i 's/:append\(.*\)+=\([^"]*\)" */:append\1=\2" /' or ... | xargs grep -l ":remove.*+=" \ | xargs sed -i "s/:remove\(.*\)+=/:remove\1=/" Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iea6235e7c76e252f4d473652957c2925f6b8845a
2022-02-16chassis: Rename FMT variable in control powerJim Wright1-1/+1
In order to disambiguate from other uses of the FMT variable name, rename to OBMC_CONTROL_POWER_FMT in obmc-op-control-power bit bake files. Change was suggested in the following review: https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/50765 Signed-off-by: Jim Wright <jlwright@us.ibm.com> Change-Id: If74dc281b8dfa9c06b86012f010d5b5a40d1a0f6
2022-02-16meta-ibm: p10bmc: Add otptool configurationAndrew Jeffery5-0/+188
Some addition development details must be managed in this bbappend due to co-development of the AST2600 and IBM p10bmc designs. IBM did bringup of secure-boot on pre-production AST2600 silicon and this shaped how the platform's OTP was configured. The PEM files represent the public portion of the IBM signing key-pairs for p10bmc systems. These are included to provide a canonical location for the production OTP image artifact. Change-Id: I7caa6cfd5848b1d671ef95f8031b76088673900a Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-02-14meta-ibm: witherspoon-tacoma: Disable socsec signingAndrew Jeffery1-0/+1
Don't support the hardware root-of-trust on Tacoma boards. Change-Id: I144d3bf445063f6341ae1958611873f79c9c00c7 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-02-08meta-ibm: Add power supply sensor associationsBrandon Wyman3-0/+180
Make the power supply sensors visible via redfish, chassis, all_sensors. Input voltage, input power, output voltage, output current. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Change-Id: I79c9a07c849ad8015fb9fa42242aeab932b755c9
2022-02-08sensors:p10bmc:Add power-supply hwmon configsBrandon Wyman6-0/+40
Add the power-supply configuration files for the ibm-cffps power supplies used in the Rainier and Everest systems in order to get telemetry data added to D-Bus via phosphor-hwmon. Rainier power supplies on bus 3 at 0x68, 0x69, 0x6a, and 0x6b. Everest power supplies on bus 3 at 0x68, 0x69, 0x6d, and 0x6b. Older hardware has power supply at 0x6a instead of 0x6d. Input voltage, input power, output voltage, and output current. No critical or warning low values, to avoid logging errors when AC is pulled, or other fault conditions handled by the PSU monitor. AC loss, brownout, over-voltage, over-current, and other conditions should be handled by the PSU monitor application. No critical/warning high values, for similar doubled up fault logging. Change-Id: I9f39e41e2dd0a7b77910207322506d8376f98772 Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
2022-02-08phosphor-power: Add phosphor power control bit bake filesJim Wright5-211/+8
Add bb files to support phosphor-power-control application in p10bmc image. Remove skeleton power control application and phosphor-power power sequencer application from image. Signed-off-by: Jim Wright <jlwright@us.ibm.com> Change-Id: Ib1c3cb5ba6880ea73265332107503b61def1a2ef
2022-02-07ibm:p10bmc: Add some sensor inventory assocsMatt Spinler3-25/+106
Add the associations from the sensors on the panel and the sensors on the motherboard to their parent FRUs in the inventory. The chassis association isn't needed here because hwmontempsensor already creates it. The association will be used for sensor callouts. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I4292646b0b101608f2bcd4c2d0f65e13f16d3d87
2022-02-01meta-ibm: Set dbus object path for total power on p10bmcChris Cain1-0/+3
Tested on Everest HW Change-Id: I667434f8701b0a635a7d3ca8077b47e4ae297f45 Signed-off-by: Chris Cain <cjcain@us.ibm.com>
2022-01-31meta-ibm: linux-aspeed: p10bmc: Enable UHCI and PL2303Eddie James1-0/+3
The PL2303 is a serial-to-USB converter chip, needed to communicate with a UPS. These are commonly attached via USB1.1, meaning that a UHCI driver is required to communicate with them, so enable that too. Signed-off-by: Eddie James <eajames@linux.ibm.com> Change-Id: I3a7550a51d084af498e7a5aab5c6b6e75002a4e3
2022-01-26ibm:everest: New device callouts JSON fileMatt Spinler1-30/+10
This fixes power supply addresses. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I36cfa1097590d01ea26953c3d32f4aec8d3aff7d
2022-01-25treewide: fix up github SRC_URIsPatrick Williams12-12/+12
Per [1], Yocto is going to start requiring both branch names and `protocol=https` in GitHub SRC_URI variables. Ran the upstream tool to automatically fix our URIs. 1. https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n10 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I5f9619f7ff707050b469ae74c8aa16846568c5e4
2022-01-24meta-ibm: remove ibmtpm2tssAndrew Geissler1-2/+1
This package does not currently support openssl v3: | TpmToOsslMath.h:79:5: error: #error Untested OpenSSL version | 79 | # error Untested OpenSSL version | | ^~~~~ For now, remove this package so we can make forward progress with openssl v3 in openbmc. The following issue appears to be tracking support: https://sourceforge.net/p/ibmswtpm2/tickets/18/ Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I2249c323b8219525dcef856d8ceab63de417e299
2022-01-19meta-ibm: Manually magic close the fan watchdogMatt Spinler1-0/+1
To support the watchdog application being able to restart after expiring the watchdog (by being killed) multiple times per BMC reboot, a manual magic close must be issued by writing a 'V' into the watchdog device before starting the watchdog. Without that, the underlying hardware watchdog wouldn't actually start running when the watchdog app was started again, such as on the next boot. Most watchdogs simply reboot the system upon expiration, but in this case it's being used to trip a GPIO that the fan hardware latches on to go to full speed so must support being restarted multiple times. The busybox watchdog application used to support this, but it was removed since it apparently caused some undesireable print statements from the kernel on other platforms. An alternative may be to fix this in the ASPEED watchdog driver, though I'm not sure what all that would entail or if it even makes sense. Tested: Expire and start the watchdog multiple times and the fans now go to full speed each time the watchdog expires, unlike before. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I770c4fd7cca15949abd7de9dc07975562080f032
2022-01-19p10bmc: Add tpm2 to machine featuresJoel Stanley1-1/+1
This enables the TPM driver in the kernel configuration. Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: I0278543d753c7526d14eb971ac678ff364719d49
2022-01-18u-boot: Specify u-boot package for AST2500 machinesJoel Stanley3-0/+10
This sets u-boot to the package containing the v2016.07-aspeed-openbmc branch. This ensures there will be no change if the default changes in the future. Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37 Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-18u-boot: Specify u-boot package for AST2400 machinesJoel Stanley1-0/+4
This sets u-boot to the package containing the v2016.07-aspeed-openbmc branch. This ensures there will be no change if the default changes in the future. Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: Iaf709343b966c39ca707a10ef57fa0010bf6eb6f
2022-01-10meta-ibm: p10bmc: Install straceAndrew Jeffery1-1/+1
strace(1) is a highly effective utility that allows for inspection of the execution of a program through its interactions with the kernel. strace can be used to extract syscall, data and timing information and does not require any change to the running applications or firmware image. https://www.man7.org/linux/man-pages/man1/strace.1.html Change-Id: I431f5ea6246a47fba259cc5af0cdc932b38be111 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-01-10meta-ibm: p10bmc: Install gdbserverAndrew Jeffery1-0/+1
gdbserver can invoke or attach to running processes to expose a network interface for a remote gdb connection. From there the instructions for remote debugging in the Poky Reference Manual can be used to inspect the state of processes on the BMC at runtime: https://www.yoctoproject.org/docs/1.0/poky-ref-manual/poky-ref-manual.html#platdev-gdb-remotedebug-launch-gdb-inferiorbins Change-Id: I8a54d642955da8f2491b77553c81e8b63452901c Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-01-10meta-ibm: p10bmc: Remove kdump-related toolsAndrew Jeffery1-1/+1
The kdump effort has been set aside in favour of the lighter-weight and better supported use of ramoops to capture debug data. Change-Id: I4439a159a9783a2ff0e7335dd7efead3d82e0bc7 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-01-07wistron-ipmi-oem: srcrev bump 572a22ad0a..e04459e514Andrew Geissler1-1/+1
Ben Pai (1): Modify OWNERS file Change-Id: I323eba87ed91fec6dba524f2a71528e24e907d68 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-01-07meta-ibm:witherspoon: remove croserverAndrew Geissler1-0/+1
Witherspoon is running tight on space, and as our primary hardware CI machine, we need to keep it going. croserver can still be loaded into /tmp and run when needed Tested: - Reduced image size by ~100KB - Will rely on CI to regression test Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I49b375d32462f0564b8310b430394077d0e887ed
2022-01-07ibm: phosphor-software-manager: Enable USB update on p10bmcAdriana Kobylak2-0/+4
Change-Id: Ifca5f828e58b6f86f4c7fe11544b50ff5f754702 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
2021-12-17post-code-manager : Switch to meson build system & BumpManojkiran Eda1-2/+2
Tested By: Was able to sucessfully build post-code-manager using meson & was able to see that the daemon is working as before on a BMC. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Change-Id: I4cf90fc8bf0a3350b944d5ef94fa131cb6f1c35f
2021-12-15meta-ibm:witherspoon: remove obmc-ikvm packageAndrew Geissler1-0/+2
Witherspoon is running tight on space, and as our primary hardware CI machine, we need to keep it going. The GUI has already been pulled out so the KVM package doesn't make much sense anyway. Tested: - Reduced image size by ~200KB - Will rely on CI to regression test Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I3e55702da764e4e1ca1673e158c7acf4f74c9bda
2021-12-09meta-ibm: Add partition SAI and platform SAI as fault indicator objectsLakshminarayana R. Kammath3-0/+54
phosphor-led-manager already has platform and partition system attention indicator D-Bus objects implementing xyz.openbmc_project.Led.Group. but, was not added to association json which this commit is doing. Signed-off-by: Lakshminarayana R. Kammath <lkammath@in.ibm.com> Change-Id: I3803cbb2d07626e3af6474ea8e74d987f4a963b0
2021-12-07meta-ibm:(PIM) Add altitude sensor associationBen Tyner3-0/+3
Make altitude sensor visible via redfish, chassis, all-sensors. Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Change-Id: I7e032e74ad8889e7e80e197dccc7b65a26482c0a
2021-12-02Remove BBLAYERS_NON_REMOVABLE variableAlexander Filippov3-37/+0
`BBLAYERS_NON_REMOVABLE` is obsolete and no longer required. As it said by Yocto documentation it can be used by `Hob` https://www.yoctoproject.org/docs/1.5.2/ref-manual/ref-manual.html#var-BBLAYERS_NON_REMOVABLE that already removed since Yocto-2.1 https://www.yoctoproject.org/tools-resources/projects/hob Change-Id: Ibc2d8268a9d837a81e9cf6b0131dba8d0a030a3f Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
2021-12-02meta-ibm: Add enclosure_fault and enclosure_identify to the Association jsonLakshminarayana R. Kammath3-0/+66
Earlier enclosure_identify and enclosure_fault associations were missing in the inventory manager. With this checkin we are adding those associations. busctl get-property xyz.openbmc_project.Inventory.Manager /xyz/openbmc_project/inventory/system/chassis xyz.openbmc_project.Association.Definitions Associations a(sss) 24 "fault_led_group" "fault_inventory_object" "/xyz/openbmc_project/led/groups/enclosure_fault" "identify_led_group" "identify_inventory_object" "/xyz/openbmc_project/led/groups/enclosure_identify" "chassis" "inventory" "/xyz/openbmc_project/inventory/system/chassis" .... After closely looking into all the LED's it was identified that enclosure_fault and enclosure_identify is missing in the association and this commit is to enable same Signed-off-by: Lakshminarayana R. Kammath <lkammath@in.ibm.com> Change-Id: I42728d994e9110c56c607aeea98623fe2613af92
2021-11-16Enable dumps for IBM systemsAsmitha Karunanithi1-0/+1
Dumps are disabled by default. This commit enables the dump feature for ibm based systems. Tested By: * Dump flag enabled: GET https://${bmc}/redfish/v1/Managers/bmc/LogServices { "@odata.id": "/redfish/v1/Managers/bmc/LogServices", "@odata.type": "#LogServiceCollection.LogServiceCollection", "Description": "Collection of LogServices for this Manager", "Members": [ { "@odata.id": "/redfish/v1/Managers/bmc/LogServices/Dump" } ], "Members@odata.count": 1, "Name": "Open BMC Log Services Collection" } * Dump flag disabled: GET https://${bmc}/redfish/v1/Managers/bmc/LogServices { "@odata.id": "/redfish/v1/Managers/bmc/LogServices", "@odata.type": "#LogServiceCollection.LogServiceCollection", "Description": "Collection of LogServices for this Manager", "Members": [], "Members@odata.count": 0, "Name": "Open BMC Log Services Collection" } Signed-off-by: Asmitha Karunanithi <asmitk01@in.ibm.com> Change-Id: Iad5a364ac46b5bf62bc2186eb29786454f650802
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-07 16:19:38 +0300