Age | Commit message (Collapse) | Author | Files | Lines |
|
Upstream has removed the image-prelink bbclass[1], so remove it from any
local.conf.sample that still has it enabled.
1. https://git.openembedded.org/openembedded-core/commit/?id=857baaf9e3d181ca18264e85d90b899fd94acff9
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I70f42f8816f5dea207fcf5c34837d6796b3f6bb6
|
|
* Deprecate N-1 release (hardknott).
* Enable N+1 release (kirkstone).
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
|
|
The MAINTAINERS files are no longer used and are out of date (references
to IRC still exist in most of them). Remove them and rely on the OWNERS
exclusively.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
|
|
The size of the zoneinfo file generated by adding tzdate is 1004B,
The size of the zoneinfo file generated by adding tzdate-core is
572B,and the time zone related functions can still be used normally,
but it can save 432B of space.
Signed-off-by: Albert Zhang <zhanghaodi@inspur.com>
Change-Id: Idd5211efc86274d12226cff65b847ffc04fe1cf5
|
|
Per [1], Yocto is going to start requiring both branch names and
`protocol=https` in GitHub SRC_URI variables. Ran the upstream tool to
automatically fix our URIs.
1. https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n10
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5f9619f7ff707050b469ae74c8aa16846568c5e4
|
|
This sets u-boot to the package containing the v2016.07-aspeed-openbmc
branch. This ensures there will be no change if the default changes in
the future.
Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Chassis dependencies (obmc-control-chassis, obmc-op-control-power,
obmc-host-failure-reboots) have been deprecated, use
x86-power-control instead.
Flash dependencies (obmc-flash-bmc, obmc-mgr-download,
obmc-control-bmc) have been deprecated, use phosphor-software-manager
instead.
Tested: built on5263m5 successuflly.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ib676ddccae91607fbf8eabdf3a22d69624a9da25
|
|
This layer has nothing in it. The current direction is for anything
architecture specific to end up in meta-phosphor. Remove this "layer"
so that it doesn't keep getting copied into new machines.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ied03175589840490bcd1eda8c704c73e224ba9a9
|
|
`BBLAYERS_NON_REMOVABLE` is obsolete and no longer required.
As it said by Yocto documentation it can be used by `Hob`
https://www.yoctoproject.org/docs/1.5.2/ref-manual/ref-manual.html#var-BBLAYERS_NON_REMOVABLE
that already removed since Yocto-2.1
https://www.yoctoproject.org/tools-resources/projects/hob
Change-Id: Ibc2d8268a9d837a81e9cf6b0131dba8d0a030a3f
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
|
|
Add the fru YAML configuration of Power Supply for fp5280g2.
Tested:
ipmitool -I lanplus -H ${IP} -U root -P 0penBmc -C 17 fru list
FRU Device Description : Builtin FRU Device (ID 0)
Board Mfg Date : Mon Jan 1 08:00:00 1996
Board Serial : 000000000000
Board Part Number : 0000000
FRU Device Description : cpu0 (ID 1)
Board Mfg Date : Mon Jan 1 08:00:00 1996
Board Mfg : IBM
Board Product : PROCESSOR MODULE
Board Serial : YA1934426664
Board Part Number : 02CY296
FRU Device Description : dimm2 (ID 5)
Product Manufacturer : Samsung Electronics
Product Name : DDR4-2666 16GiB 64-bit ECC RDIMM
Product Part Number : M393A2K43BB1-CTD
Product Serial : 367f4c9d
FRU Device Description : powersupply0 (ID 20)
Product Name : powersupply0
Product Part Number : PS-2801-12L
Product Serial : 6K12A0118446MM
FRU Device Description : powersupply1 (ID 21)
Product Name : powersupply1
Product Part Number : PS-2801-12L
Product Serial : 6K12A0118362NS
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I04b45f5839f991f98b3f628db2246d4dced804c8
|
|
Generally we will set the fruID of the board to 0.
Tested:
ipmitool -I lanplus -H ${IP} -U root -P 0penBmc -C 17 fru list
FRU Device Description : Builtin FRU Device (ID 0)
Board Mfg Date : Mon Jan 1 08:00:00 1996
Board Serial : 000000000000
Board Part Number : 0000000
FRU Device Description : cpu0 (ID 1)
Board Mfg Date : Mon Jan 1 08:00:00 1996
Board Mfg : IBM
Board Product : PROCESSOR MODULE
Board Serial : YA1934426664
Board Part Number : 02CY296
...
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I3912636105310855e59810cbc1fab4a4cad53a1b
|
|
Enable tzdata by default.
Tested: built image successufully and verified that
`/usr/share/zoneinfo` already exists.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I9f244cd50c5898c8f72247414e18b0c72c5a0c1a
|
|
Enable phosphor-sel-logger by default.
Tested: built image successufully and saw that the sel-logger
has been started.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I50062f8225d95f1092512c0956bdc1bdeb83949e
|
|
Enable service-config-manager by default.
Tested: built image successufully and saw that
the phosphor-srvcfg-manager has been started.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Id5f66cea66d35f373b8157a3b0a2732edd018b40
|
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Every machine layer treats 'system-management' as either part of a
package-group or removes the feature. The sample implementation in
meta-phosphor is a do-nothing shell script (and up until recently was a
Python script). There appears to be no useful purpose to this feature
as a stand-alone concept, so remove it.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20ca1fa8ff3cb01cac2d07d4ded84e0769e4514b
|
|
This commit changes the uboot to u-boot-aspeed-sdk to
fit the 64M layout
Tested: tested on the real machine, the image booted sucessfully
Signed-off-by: John Wang <wangzhiqiang02@inspur.com>
Change-Id: If6087abe489f157ac3f75e7428dbfe329caa0957
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ia05891430c6c97a89b7bc8ba4558ae496866bf7d
|
|
bitbake offers a choice of DEB, RPM or IPK packaging. To a degree the
choice is functionally arbitrary for image generation but control over
the package format becomes important if we want to:
1. Include runtime package management functionality in the firmware image
2. Mess about with the packages on the build system
With respect to 1 the IPK format and opkg (an ipk package manager) are
designed for embedded systems[1] - by contrast to RPMs have heavier
dependencies and a greater impact on the size and complexity of the
firmware image.
Regarding 2, the embedded nature and the need for opkg to work without
much fuss leads to a lower configuration barrier by comparison to RPMs.
With ipk it becomes possible to reuse the packages built during image
preparation for core analysis without needing to generate an SDK:
```
$ export LD_LIBRARY_PATH=./tmp/work/x86_64-linux/opkg-native/*/recipe-sysroot-native/usr/lib
$ MY_DEBUG_ROOT=tmp/rootfs-debug
$ ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/*/opkg.conf \
-o $MY_DEBUG_ROOT \
update
$ fakeroot ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/opkg.conf \
-o $MY_DEBUG_ROOT \
install dbus-sensors dbus-sensors-dbg
$ gdb-multiarch
(gdb) set solib-absolute-prefix .../tmp/rootfs-debug
(gdb) add-auto-load-safe-path .../tmp/rootfs-debug
(gdb) file tmp/rootfs-debug/usr/bin/nvmesensor
(gdb) core-file obmcdump_17_9597/core.nvmesensor.0.aae91b519d0e4e0e8bbe746e3f6cd25f.2779.9594000000
Core was generated by `/usr/bin/nvmesensor'.
Program terminated with signal SIGABRT, Aborted.
pthread_kill.c:45
45 pthread_kill.c: No such file or directory.
(gdb) bt
pthread_kill.c:45
../sysdeps/posix/raise.c:26
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
"xyz.openbmc_project.NVMeSensor", this=0x488f04) at
/usr/include/sdbusplus/bus.hpp:234
../../../../../../workspace/sources/dbus-sensors/src/NVMeSensorMain.cpp:159
(gdb)
```
This approach documented in the Poky Reference Manual:
https://www.yoctoproject.org/docs/1.0/poky-ref-manual/poky-ref-manual.html#platdev-gdb-remotedebug-launch-gdb-inferiorbins
Switch all machines to IPK to align the debugging experience with
upstream's documentation and to facilitate efficient use of packaged
software at runtime.
[1] https://openwrt.org/docs/guide-user/additional-software/opkg
Change-Id: I8ef526add2d7a6790de1b3eb3fb85cd39b864f23
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
`install -d ${D}${sysconfdir}/default` has been configured
in the libmctp_git.bb file, remove it.
Tested:
1. Successfully build libmctp and image-bmc
2. Saw the `/etc/default/mctp` file in image-bmc
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I162d10b4a09ebe87388f4e3e4d9f79aa32a94230
|
|
Since the upstream has renamed the mctp package name (debf2b5),
it will fail when building fp5280g2.
Synchronously update the mctp package name of fp5280g2.
Tested: built fp5280g2 image successfully.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ifdf4bc7955d182617532537f1f5fc59931d27eca
|
|
We're about to introduce a package for mctp utilities, called 'mctp'.
However, the libmctp package already uses that name.
This change renames 'mctp' to the upstream name of 'libmctp'.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Change-Id: Ia49a40c822e920d3bc36584cbc2c97b83828cfdd
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I2b967fb31d9930074df17c108d06cfed489d1cf7
|
|
Add xyz.openbmc_project.Inventory.Item.CpuCore interfaces
to all processor cores.
Tested:
busctl introspect xyz.openbmc_project.Inventory.Manager /xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0/core2
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
org.freedesktop.DBus.Introspectable interface - - -
.Introspect method - s -
org.freedesktop.DBus.Peer interface - - -
.GetMachineId method - s -
.Ping method - - -
org.freedesktop.DBus.Properties interface - - -
.Get method ss v -
.GetAll method s a{sv} -
.Set method ssv - -
.PropertiesChanged signal sa{sv}as - -
xyz.openbmc_project.Association.Definitions interface - - -
.Associations property a(sss) 1 "sensors" "inventory" "/xyz/openbmc_p… emits-change writable
xyz.openbmc_project.Inventory.Item interface - - -
.Present property b true emits-change writable
.PrettyName property s "" emits-change writable
xyz.openbmc_project.Inventory.Item.CpuCore interface - - -
xyz.openbmc_project.State.Decorator.OperationalStatus interface - - -
.Functional property b true emits-change writable
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ia7acfbf8b0a90f7b97cb7df090a7469815a6434d
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ia66f5b4a95f54f7e537d0f0fba1ac70009002de5
|
|
We've typically kept these LAYERSERIES_COMPAT to 2 releases: the current
and the upcoming. Remove 'gatesgarth' is it is now 2 releases back.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5e812a94fed1738898af75c0fdee81996a5bbf20
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I3ecba17a12ac6da02ac86bca3141b1da6d54fbbc
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I84391ed94df2a359652e4a372a3c0fac51c630ed
|
|
Since the upstream CONF_VERSION has been changed to 2,
Need to sync the CONF_VERSION of the inspur layer.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I539f6a4033933b728131a684163a9ff6a58fdec7
|
|
Latest upstream yocto has moved on to the 3.4 honister release.
Compatible with honister for all inspur machines.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I991415cb0db971d553eb374b7df8f634b00f4816
|
|
Refer to: https://lore.kernel.org/openbmc/YQ1FD5q8KbhbXVBK@heinlein/
```
poky/scripts/contrib/convert-overrides.py meta-inspur
git grep "_[a-z0-9_/-]*[ :]" -- meta-inspur | grep ".bb"
git grep -l _fp5280g2 -- meta-inspur | xargs sed -i \
's/_fp5280g2/:fp5280g2/'
git grep -l _on5263m5 -- meta-inspur | xargs sed -i \
's/_on5263m5/:on5263m5/'
git grep -l _virtual -- meta-inspur | xargs sed -i \
's/_virtual/:virtual/'
```
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I5ef5039691caf5e33fb865da0fdd70d95d7e3bdf
|
|
Background: The OpenBmc project default root account password is set
in meta-phosphor/conf/distro/include/phosphor-defaults.inc and can be
customized in each layer's local.conf file.
Many of these local.conf.sample files had redundant code to set the
password, which probably should not have been there. Removing them
allows the defaults in phosphor-defaults.inc to take effect.
Tested: No. Only meta-ibm was tested.
Signed-off-by: Joseph Reynolds <joseph-reynolds@charter.net>
Change-Id: I76dce00d269d7afa005d7bcfd63f846d3cf45596
|
|
Since 29086950(phosphor-net-ipmid) has updated the SOL parameters
by obtaining the attribute values of the
xyz.openbmc_project.Ipmi.SOL interface, it is necessary to enable SOL
by default on fp5280g2.
Tested by:
1. built phosphor-settigs successfully.
2. ipmitool -I lanplus -H x -U x -P x -C 17 raw 0x0c 0x22 0x00 0x00 0x00 0x00
Use the above command to successfully get the attribute value.
3. ipmitool -I lanplus -H x -U x -P x -C 17 sol activate
ipmitool -I lanplus -H x -U x -P x -C 17 sol deactivate
Use the above commands to successfully activate and deactivate SOL
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I7935fdebd833fe7ea0076942722e79ccf1ab2a3a
|
|
Since 178cae08d6(phsophor-dbus-interfaces) has converted the "Type"
property in Inventory.Item.Chassis to an enumeration, need to update
these default values in the YAML file.
Tested: built phosphor-inventory-manager successfully and the
`xyz.openbmc_project.Inventory.Manager` service has been seen.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I51d3b00d7d7e6cbb18b6e144ed87712419e5c483
|
|
Add events-policy for fp5280g2.
Tested: Test ok.
Example: When the event is triggered, the destination can receive the
snmptrap.
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Change-Id: Ice498f49f348199f3686b8ec3c6575156e47d0f2
|
|
Fix the phosphor-inventory-manager_%.bbappend file and install
associations.json to /usr/share/phosphor-inventory-manager/
Tested: built phosphor-inventory-manager repo successfully and saw
the append associations.json file is successfully installed to
/usr/share/phosphor-inventory-manager/
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ic2c445f88794f359bef47170e8de446e8f7eb590
|
|
Add libmctp configs for fp5280g2, and use `astlpc` as
the startup parameter of the process.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Id8737a745beb426b115522e75e0f434cadcbc253
|
|
This is apparently not actually working anymore and is removed in the
next poky update.
Change-Id: Ia1c6a258d124a4a30a14fc42e8e0bba95e64faeb
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
The intent behind this commit is to add the configuration of
total_power, after power on, read the sensor value of total_power
from occ-hwmon and successfully read it through D-Bus.
Tested:
~# mapper get-service /xyz/openbmc_project/sensors/power/total_power
xyz.openbmc_project.Hwmon-b7759d36485edc452dd4ab56fcddbc713138c18574d600852a5ebf252410dd34.Hwmon1
~# busctl introspect xyz.openbmc_project.Hwmon-b7759d36485edc452dd4ab56fcddbc713138c18574d600852a5ebf252410dd34.Hwmon1 /xyz/openbmc_project/sensors/power/total_power
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
org.freedesktop.DBus.Introspectable interface - - -
.Introspect method - s -
org.freedesktop.DBus.Peer interface - - -
.GetMachineId method - s -
.Ping method - - -
org.freedesktop.DBus.Properties interface - - -
.Get method ss v -
.GetAll method s a{sv} -
.Set method ssv - -
.PropertiesChanged signal sa{sv}as - -
xyz.openbmc_project.Sensor.Value interface - - -
.MaxValue property d inf emits-change writable
.MinValue property d -inf emits-change writable
.Unit property s "xyz.openbmc_project.Sensor.Value.Unit.… emits-change writable
.Value property d 122 emits-change writable
xyz.openbmc_project.State.Decorator.OperationalStatus interface - - -
.Functional
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Iba09b549b0b0661ece8404d6d0ab307db8335779
|
|
The intent behind this commit is to enable First Boot Set MAC Feature
for Network Service and remove first-boot-set-mac.
Because the `sync-mac` of the Network Service can set the MAC address
at runtime(if the Inventory Objects are Added at Runtime).
Tested: Built fp5280g2 successfully and saw eth0 & eth1 worked.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I99967f84c64cbcac34adf95cf6a5084f8b1a185d
|
|
This commit enables support for power supply monitoring
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I815ebd2e6135c4e858744c8c5d48121ccc7689dc
|
|
The repository supports it, so switch it over in bitbake.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I8d96c79b395ee2614ddd869091569f245426c5c7
|
|
The mssage is: WARNING: Recipe phosphor-fp5280g2-psu-update sets B
variable with trailing slash 'work/openbmc/build/tmp/work/arm1176jzs-openbmc-linux-gnueabi/phosphor-fp5280g2-psu-update/1.0+git${SRCPV}-r1/git/',
remove it.
Tested: Built fp5280g2 successfully and without warnings.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I6b039fe019f9cc9ea2dccf1636480fa08f00fb29
|
|
- Moved "inherit native" statements to the last position to remove QA
Issues.
- This commit contains occ and vpd, the message is:
WARNING: QA Issue: fp5280g2-openpower-fru-vpd-layout-native:
native/nativesdk class is not inherited last, this can result in
unexpected behaviour. Classes inherited after native/nativesdk:
openpower-fru-vpd.bbclass [native-last]
WARNING: QA Issue: fp5280g2-openpower-fru-inventory-native:
native/nativesdk class is not inherited last, this can result in
unexpected behaviour. Classes inherited after native/nativesdk:
openpower-fru-vpd.bbclass [native-last]
WARNING: QA Issue: fp5280g2-occ-control-config-native:
native/nativesdk class is not inherited last, this can result in
unexpected behaviour. Classes inherited after native/nativesdk:
openpower-occ-control.bbclass [native-last]
Tested: Built fp5280g2 image successfully and without the warnings.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ifc6f90296a1921ec22267d33ab0bcb8ee0579dcc
|
|
- DEPENDS is redundant and should be removed from the bbappend file.
- Also, Remove install the phosphor-led-manager file.
Tested: built phosphor-led-manager successfully and worked.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I6797c2a860c64b74ea09881fd990e8298be96c6b
|
|
Discord has more users, IRC traffic has ground to a halt.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I8e3d32ec5a75b7709a6fe2f37e17b24f3070563c
|
|
This commit enables phosphor-ledmanager to do lamp test
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I66bf7ba7e7a481b11e87d3a5f92de01a09f5eeee
|
|
- Previously, our purpose of using virtual LEDs was to use the
default YAML and reconstruct the YAML configuration.
- Currently, we use JSON instead of YAML, so we can remove the
virtual LED configuration and use the default LEDs repo.
Tested: Built fp5280g2 successfully and saw all the D-Bus object paths
in the led-group-config.json file
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ib99c5e3f87539180812a6ec011a86b3774516663
|
|
- Since the phosphor-led-manager_git.bb file use PACKAGECONFIG to
define `use-json`, should use PACKAGECONFIG_append instead of
EXTRA_OECONF.
Tested: Built ledManager successfully and saw use the JSON
configuration file at runtime than the static led.yaml
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I91039207176e483bd83e670b1a2d72a58c7ff2e6
|