Age | Commit message (Collapse) | Author | Files | Lines |
|
Jason M. Bills (1):
Use the new CPUModel enum names from libpeci
Change-Id: I85f4c4b04a21797232d5bfa9cbad31270dd05cef
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
As of the most recent host-error-monitor SRCREV bump to commit
7aede384fc, builds may fail if the googletest package isn't found:
```
../git/tests/meson.build:15:8: ERROR: Assert failed: Googletest is required if tests are enabled
```
Let's return them to being disabled by default for yocto builds.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: I48246f69cd76d8e7cdd89c63db56f3e9e6876027
|
|
Jason M. Bills (1):
Enable tests by default and change check to allowed
Change-Id: Ie18f54e9532ed7593b6b3ec11f8f9b2ea71ef5a4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Upstream poky made a commit that adds an `/etc/motd` with a strong
warning that meta-poky is not intended to be used for production
purposes. There isn't anything we use directly from meta-poky anymore,
so clean up all references to it.
See poky commit a226865c8683398b5f58628ba2ec5aee1ee6c19d for additional
context.
We could potentially switch from using the `poky` subtree to picking
up OECore directly, but right now it also provides us a qualified set of
OECore + bitbake.
Tested: Built yosemite4 and confirmed `motd` output is absent when
SSHing in.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I9c08650d2278b3ba26794c009adad3e593767f58
|
|
pkgconfig is required to build pfr-manager, so inherit it.
Change-Id: Ia70a9341766ebe8dfa423930670ee7cb6ee32561
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
|
|
Patrick Williams (1):
sdbusplus: use shorter type aliases
Change-Id: I31b2617e022663f6f9857e8abb64be4d1a6ac32b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
Change-Id: I9a145330249c3e3eb15000ee6087c4cbf4bebf96
|
|
Matt Simmering (1):
Update RestrictionMode enum
Change-Id: Iae72b435710679f928b1e0a2e771133f4f1d466e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Bump the revision and add the new optional feature to PACKAGECONFIG list
(disabled by default to preserve old behavior).
Paul Fertser (1):
Optionally send reports to D-Bus Logging
Change-Id: I6fedbe075237a7bb24bb488647cfc4c603081733
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
|
|
PavanKumarIntel (1):
Increase MaxFWImageSize to avoid transfer failure
Change-Id: I2e65d94d7fc69a925567f8c93462c3058bf25ff3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Patrick Williams (1):
meson: adjust nlohmann-json dependency
Change-Id: I04dd429675dd4d8436051feeecd17483ffa7f864
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Peter Foley (3):
storagecommands: Split validation logic
subprojects: Avoid configure errors due to missing provides
subprojects: Ignore wrap files from subprojects
Change-Id: I22ebf7c74a76a71c0432471ddaa4bb402620eebd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jatkiewicz, Joanna (1):
intel-ipmi-oem: Fixing bios.xml parsing
Patrick Williams (1):
sdbusplus: avoid deprecated phosphor::Timer
Change-Id: I980228905b04bf4d6d3d16f1dd97479b52d6d0f0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (3):
Enable standalone build
Add a meson option to enable googletest
Add status LED support for ERR2 timeout
Change-Id: I7e4cc8286c61b5acde842f2133bbaacbf667ded1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
PavanKumarIntel (1):
Fix the bugs found in static analysis
Change-Id: I87a96aacb0e86c8461a1747aee2fcd974664674e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
PavanKumarIntel (1):
Fix the bugs found in static analysis
Change-Id: I27aef84971babd19397bf718207e680528fc448c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
|
|
Patrick Williams (1):
clang-format: copy latest and re-format
Change-Id: Ibda900732048ed8d45c67aa71cf3ef68192d05bc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Patrick Williams (1):
clang-format: copy latest and re-format
Change-Id: Ia6af4d03ba6beca4d644578ec294fd6f5edc99b1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
bmcweb is already added as a default in the meta-phosphor package
groups. A large number of machines have mistakenly also explicitly
added a RDEPEND on assorted package groups, which is not necessary.
Clean these up.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ifd3726d18aab45475f80d054a4640196ac0b71d2
|
|
The webui-vue package is now enabled by default. Clean up all the meta
layers to clean up the explicit enablement.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
|
|
Vernon Mauery (1):
Remove CMake build system
Change-Id: Id3a312469b2bcd6c9870e36ff35733f79b825f7f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This moves the OpenBMC kernel to a v6.5 base for ASPEED.
The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device
tress are now under an 'aspeed' subdirectory. This change means systems
must describe the KERNEL_DEVICETREE with the aspeed directory prefix.
There are 78 patches in the tree, with 40 of those patches not
yet queued for merging in v6.6.
The remaining out of tree patches include:
Andrew Jeffery (6):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (16):
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
eeprom: ee1004: Enable devices on multiple busses
dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
eeprom: ee1004: Add OF matching support
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
leds: Ensure hardware blinking turns off when requested
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (14):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
ARM: dts: nuvoton: npmc750-evb: Add default console
tpm: tis-i2c: Add more compatible strings
leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
arm64: configs: Add Nuvoton NPCM defconfig
ARM: configs: aspeed: Add new FSI drivers
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: Add openbmc defconfig
ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
intel-ipmi-oem repo has been updated to add the meson build
system. This bumps the repo and updates the yocto build type
to be meson.
Tested: Builds using meson
Change-Id: I8484d600a0d682f1a81ea670116e621daa8377c5
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
|
|
Jason M. Bills (1):
Get Device ID: support new version format
Change-Id: I56b06e1bf6610eaa59538574d1ee421973f1ca51
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Vernon Mauery (3):
changes needed for meson build
changes to make it build without cheating
add meson build
Change-Id: Ib19110f9b9c695d4a30d8f3db65e43c6d292c2a2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Remove unused namespace
Change-Id: I2a4666663d7e0706d1276737205b38574d0ba78b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (2):
Rename CATERR to IERR
Remove CMake
Change-Id: I2d1b1f35b2e37f550d6558d78dd4b3230d8972e3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (2):
Rename CATERR to IERR
Add a configuration option to allow reset on MCERR
Change-Id: Ic3bdd3bde634cd9a3995bc85c99e81b838850634
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Vernon Mauery (1):
Add OEM get BMC Version String command
Change-Id: Ifb786919d28d3798a627d3a904e48fcf06ba1f3b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Fix more build warnings
Change-Id: I3554ac3f66209cb02891984582fa12f997e851bc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This changes the build to meson and creates PACKAGECONFIGs for the build
options to avoid needing to use EXTRA_OEMESON in recipes.
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
Change-Id: Ifdbfecef46d16a5f36b03ee3a72eef30b9bc1b8b
|
|
ankita prasad (1):
Update the PFR CPLD Version format
Change-Id: Ia920f0af79108f2b4c09c32af1386930945692f6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (3):
Add support for FLAG_ACTIVE_LOW in libgpiod
Fix build warnings
Port to meson
Change-Id: I7bfebee3cea70dbcf9e79e7905f0c4317d252fea
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
sri anjaneyulu alapati (1):
Set BMC boot complete checkpoint in unprovision mode
Change-Id: Ia4c9cf8a0590bd4015c64192bf0d4b7fa1ceae9c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Fix build error with CRASHDUMP enabled
Change-Id: I66d00f8358ea8d7ce406e5cc7eb50094bf080908
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Use an enum to specify the type of recovery to perform
Change-Id: Ib9180d2d5316cd41b59bd8413b806be9a8a34d60
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
ankita prasad (1):
Removing PLD lines to read PFR CPLD Version
Change-Id: I3b995422a91d089f6e2b668393a7e11f5611455f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Return error when SDR offset is out of range
Change-Id: Ia438634fef38fb38527960a58f45c3de7f92643a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
PavanKumarIntel (1):
Fix to prevent the FRU corruption while updating
Change-Id: Ifaf448031ae3da923f52771f8b9ceec21b819f2d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Change CrashdumpComplete signal interface
Change-Id: I2e9f9cfacd48de8b9422749373f1a8007280c986
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ivan Mikhaylov (1):
tinyxml2 make system changed to meson from CMake
Change-Id: Ib9285f286ddfb60d464ee7cb25deb069ee87eff2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matt Simmering (1):
Fix object path of chassis intrusion
Change-Id: I39615b6dfda6cba0b2d4a21c98e764a491986e7d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jason M. Bills (1):
Use variable for service install location
Change-Id: I28d0ee360da26950cee2d16f8da610783db94abd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
We need pkgconfig to get the systemd service file location variable to
support usrmerge.
Tested:
Confirmed that host-error-monitor can find pkgconfig and the systemd
service file location variable.
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
Change-Id: Id453f64d7b249c4fcb0af4cc8395dea8dc3c5f96
|
|
Jason M. Bills (1):
Use variable for service install location
Change-Id: I23d54bcdc9b0edc0f4c2745b79b0dec8b098625b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Add explicitly libtinyxml2 in depends for intel-ipmi-oem.
Change-Id: I941ab3bd36ed5c325e6d6abd57375818d66cef43
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
|
|
Jason M. Bills (1):
Handle crashdump busy error
Change-Id: I5bbf0522a5b8d81b96b09fd2d7a8b27bdb45203c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
sri anjaneyulu alapati (1):
Updated Additional Error/Status codes
Change-Id: Ied89d2f6f325c0ad1de37327bc5b85e681fadf97
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|