| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The webui-vue package is now enabled by default. Clean up all the meta
layers to clean up the explicit enablement.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
|
|
This moves the OpenBMC kernel to a v6.5 base for ASPEED.
The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device
tress are now under an 'aspeed' subdirectory. This change means systems
must describe the KERNEL_DEVICETREE with the aspeed directory prefix.
There are 78 patches in the tree, with 40 of those patches not
yet queued for merging in v6.6.
The remaining out of tree patches include:
Andrew Jeffery (6):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (16):
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
eeprom: ee1004: Enable devices on multiple busses
dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
eeprom: ee1004: Add OF matching support
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
leds: Ensure hardware blinking turns off when requested
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (14):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
ARM: dts: nuvoton: npmc750-evb: Add default console
tpm: tis-i2c: Add more compatible strings
leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
arm64: configs: Add Nuvoton NPCM defconfig
ARM: configs: aspeed: Add new FSI drivers
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: Add openbmc defconfig
ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I8e54833ac78e540e9dd5011533d53ff9a3af6763
|
|
obmc-host-ctl is defined as a MACHINE, DISTRO, and IMAGE feature.
The IMAGE feature pulls in a virtual provider only if the COMBINED
feature (MACHINE + DISTRO) is enabled. This is only done on openpower
machines. There are a lot of other places where machines are half-way
disabling this feature and/or changing variables which have zero effect
anyhow. Clean up almost all references to `obmc-host-ctl`.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I090d782bb6a34dc4e3c43df97e8ccf6e1812fed5
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
|
|
We also need to move the conf-notes.txt files.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ic44e015c0216b526de4fec277ad42f162bca1f33
|
|
The latest poky commit is requiring us to have all of
our template configs in a subdirectory instead of directly in
the `conf` directory. Without this we end up with errors during
setup like:
```
Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name
```
Fix this by moving all of our template files into the 'default'
template subdirectory (following the pattern of poky) and modifying
`setup` as necessary to follow.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
|
|
Enable USB virtual HUB, HID and Mass Storage gadget configs.
Disable USB host feature configs.
Enable Micrel PHY support.
Tested: Above Kernel features were enabled as expected.
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Change-Id: Icefe69542d82666d1df3c198b3c1e00d32392842
|
|
Prepend the qualcomm build version to OpenBMC version.
Tested: Target image showed 'qcom-xxx...' version number pattern.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Change-Id: I88b2eb910ef16de580c1d4bed46807b7c32e57aa
|
|
Add webui-vue, openocd, ethtool, i2c-tools and libgpiod-tools to
default image target.
Tested: Target image got these additional packages added.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Change-Id: Ifa0eb0ba42452a46597c1ed7cda5b6d1339a92d1
|
|
Add SSIF channel to IPMI config.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Change-Id: I32192b95ea5c52e1df8ba58d5eb23f1da70c8a9f
|
|
Add Qualcomm specific configs to override ast2600-openbmc-spl-defconfig.
Tested: qcom-dc-scm-v1 was bootable to u-boot with the additional u-boot
configs.
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Change-Id: I6fe7d4720504dd56921ba71034dda9b9a0b03cea
|
|
Add initial Qualcomm DC-SCM V1 machine with minimal configuration.
Tested: qcom-dc-scm-v1 target was buildable.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Change-Id: Ia3b9af76fd0d9a0823d78ae71dcb4716ef256004
|
|
ABORT is deprecated and it needs to be replaced with HALT in
BB_DISKMON_DIRS action entries.
Tested: This warning message was removed.
WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to "HALT", update configuration
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Change-Id: Id548b0132981ee9c9e338c3d63cec82cd9496925
|
|
Add layer configuration, license and owner files for meta-qualcomm.
Change-Id: Iaddfe3c38051d689bae175d3b578c83de57a0430
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
|
|
This machine is unbuildable and has not been updated in the requisite 2
months per https://lore.kernel.org/openbmc/YRUW7cazmCjW8VpP@heinlein/,
so it is being deleted.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ic3a32cda8420de728760fe3a5b73480cdd1eddda
|
|
bitbake offers a choice of DEB, RPM or IPK packaging. To a degree the
choice is functionally arbitrary for image generation but control over
the package format becomes important if we want to:
1. Include runtime package management functionality in the firmware image
2. Mess about with the packages on the build system
With respect to 1 the IPK format and opkg (an ipk package manager) are
designed for embedded systems[1] - by contrast to RPMs have heavier
dependencies and a greater impact on the size and complexity of the
firmware image.
Regarding 2, the embedded nature and the need for opkg to work without
much fuss leads to a lower configuration barrier by comparison to RPMs.
With ipk it becomes possible to reuse the packages built during image
preparation for core analysis without needing to generate an SDK:
```
$ export LD_LIBRARY_PATH=./tmp/work/x86_64-linux/opkg-native/*/recipe-sysroot-native/usr/lib
$ MY_DEBUG_ROOT=tmp/rootfs-debug
$ ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/*/opkg.conf \
-o $MY_DEBUG_ROOT \
update
$ fakeroot ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/opkg.conf \
-o $MY_DEBUG_ROOT \
install dbus-sensors dbus-sensors-dbg
$ gdb-multiarch
(gdb) set solib-absolute-prefix .../tmp/rootfs-debug
(gdb) add-auto-load-safe-path .../tmp/rootfs-debug
(gdb) file tmp/rootfs-debug/usr/bin/nvmesensor
(gdb) core-file obmcdump_17_9597/core.nvmesensor.0.aae91b519d0e4e0e8bbe746e3f6cd25f.2779.9594000000
Core was generated by `/usr/bin/nvmesensor'.
Program terminated with signal SIGABRT, Aborted.
pthread_kill.c:45
45 pthread_kill.c: No such file or directory.
(gdb) bt
pthread_kill.c:45
../sysdeps/posix/raise.c:26
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
"xyz.openbmc_project.NVMeSensor", this=0x488f04) at
/usr/include/sdbusplus/bus.hpp:234
../../../../../../workspace/sources/dbus-sensors/src/NVMeSensorMain.cpp:159
(gdb)
```
This approach documented in the Poky Reference Manual:
https://www.yoctoproject.org/docs/1.0/poky-ref-manual/poky-ref-manual.html#platdev-gdb-remotedebug-launch-gdb-inferiorbins
Switch all machines to IPK to align the debugging experience with
upstream's documentation and to facilitate efficient use of packaged
software at runtime.
[1] https://openwrt.org/docs/guide-user/additional-software/opkg
Change-Id: I8ef526add2d7a6790de1b3eb3fb85cd39b864f23
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
We've typically kept these LAYERSERIES_COMPAT to 2 releases: the current
and the upcoming. Remove 'gatesgarth' is it is now 2 releases back.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5e812a94fed1738898af75c0fdee81996a5bbf20
|
|
This is apparently not actually working anymore and is removed in the
next poky update.
Change-Id: Ia1c6a258d124a4a30a14fc42e8e0bba95e64faeb
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Latest upstream yocto has moved on to the 3.3 hardknott release
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ieae36798d66d21c2c642931f06407d3bb2acf163
|
|
This layer provides libseccomp.
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
|
|
The next release of Yocto is soon and most of the upstream
layers have switched support strings for it. Support layer
compat for gatesgarth (current) and dunsfell (previous).
(From meta-qualcomm rev: 975a7515eb7898718f9b883b4fc6e6a632640ab2)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ib572286f5ec36da446deea21bb70c21298d71137
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
QUALCOMMBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-qualcomm rev: b6305a99ca1f9c5f5ba88f1aeaf3e01a61c2f3fa)
Change-Id: Ia1a8e95f4a09743538f427055294fd84dd3169c4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Hard-code multi-user.target instead of SYSTEMD_DEFAULT_TARGET.
(From meta-qualcomm rev: 2e9af8db4508967629aed1d039071ae4062c442e)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I4f65d5f0829d5561a1a524be17a37c23df0fc11c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
In the 5.0 Linux kernel, an I2C device path segment changed:
i2c@1e78a000 -> bus@1e78a000
(From meta-qualcomm rev: a820d5f8b12deabcabfe88e70270ea8da58d2f39)
Tested: Verified paths visually, but not tested on hardware.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I2ce0bb3533f9aee6ea1687a39bde070b05d7c349
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update meta-qualcomm to master HEAD.
Patrick Venture (6):
meta-qualcomm: add QUALCOMMBASE
meta-qualcomm: centriq2400-rep: ir38163-workaround: set LICENSE field
meta-qualcomm: centriq2400-rep: console-client: set LICENSE field
meta-qualcomm: centriq2400-rep: led-manager-config-native: set LICENSE field
meta-qualcomm: centriq2400-rep: socupdate: set LICENSE field
meta-qualcomm: centriq2400-rep: rep-config: set LICENSE field
Change-Id: I818424bf2e7e8af8aaf97fa4fcfd1b0476e5748e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Renamed phosphor-hwmon%.bbappend to phosphor-hwmon_%.bbappend for this
platform.
Tested: Built centriq2400-rep and found conf in rootfs.
(From meta-qualcomm rev: 2d5d845e7d80463e327bf0f2732b7b1da8e34395)
Change-Id: I2ca665fbb5efd1718ee74893d0f5603f7329d67a
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
meta-qualcomm did not have licensing information documented. Add it.
(From meta-qualcomm rev: 493aee1af30c864658691df47a61f47d063a3ff6)
Change-Id: I4bed8e96699e6f5c1c6841a7509277d9d45502e3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Spelling errors found using github.com/lucasdemarchi/codespell
A tool to fix common misspellings.
This tool is licensed under GNU General Public License, version 2.
(From meta-qualcomm rev: b52915eccb117275d468e6de784a6c561e30055b)
Change-Id: Icc97612db517518e779994860ed11e90c9b916a5
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The new subtree model brings the subtrees up from the openbmc-machines
layer.
Change-Id: I58a03ae1be374bc79ae1438e65e888375d12d0c0
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
