Age | Commit message (Collapse) | Author | Files | Lines |
|
The IPMI network out-of-band listen will bind eth1 network channel.
(From meta-quanta rev: a79eac1c5fa32c3a2536373be3bdf6870430c1f7)
Change-Id: Ie54afeec351ce388ff27a8e2a3feb5a1856203ad
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The olympus nuvoton have runbmc nuvoton module and olympus
motherboard FRU informations. The phosphor-ipmi-fru package
binds related informations.
(From meta-quanta rev: 6375cb97e6e70553df918b04bf9f7f4419e44678)
Change-Id: Iaa8db9ad2336f1752e5f0722ffd426bdec2d9f81
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Olympus-nuvoton commuicated with BIOS use KCS channel 1
Setting obmc-host-ipmi-hw use kcs protocol binding KCS1 device
in Olympus-nuvoton
(From meta-quanta rev: 1d11afbf135af12fbb7dd489ed529df7f3a08e31)
Change-Id: If4701303bb2d3ddc6259ba49d905f7a6621b8812
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable Linux LED support, this allows control of supported LEDs
from both userspace and optionally.
(From meta-quanta rev: da09ffd483adad0ca1ed97fef553938d6f738ebf)
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Change-Id: Ib0c7b2777ec98ae15bc3ff68554085bbb0d00655
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Including temperature, current, adc voltage, and fan-tech sensors
(From meta-quanta rev: 3e6c6bf6067915f59f4b2551ffdfb8640612f192)
Change-Id: I034970d082ccfd84f830a107cf5f18f834310ba4
Signed-off-by: YSChu <yschu@nuvoton.com>
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These image generation XML files will come from the npcm7xx-igps recipe
instead.
(From meta-quanta rev: 902c46d575fc89967bb03cf304ad2ed1e847ae41)
Change-Id: Iaddd02ad6dfcc32405e39a40963507fe9d4df724
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This variable determines which XML image configuration files will be
used from npcm7xx-igps.
(From meta-quanta rev: 5d54cbf770d5701f0973fcfb8b49ed751532ddd0)
Change-Id: Ic269c8d44e1ea5a0d323ac66e419002307c19051
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For avoid confusing this layer only with RUNBMC module
(https://www.opencompute.org/documents/ocp-runbmc-daughterboard-card-
design-specification-v1-4-1-pdf)
The meta-runbmc-nuvoton will rename meta-olympus-nuvoton.
That means the Quanta Olympus product with RUNBMC module which based on
Nuvoton SoC.
The layer configuration will binding Olympus product hardware design.
(From meta-quanta rev: f4a8e7ae48dc788fa7e52f024578c67f164c8620)
Change-Id: I6faa1bfbb3b8f033239fea3c41e8b8ed18fc492d
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a maintainers file for meta-quanta. Benjamin is commit count leader
after Patrick and he already does high quality reviews of all the
meta-quanta patches.
(From meta-quanta rev: f27092b1c64457153defd1afa6322bbd9bb4b61f)
Change-Id: Ifc1d0d3b6119538e8d1f840f0238a18d74f595d1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This variable determines which XML image configuration files will be
used from npcm7xx-igps.
(From meta-quanta rev: c14953708446f32cc95f5b9a33bef6a0683b522d)
Change-Id: I86390644d88156c5afd91ecaccc8c43b2b0bd88b
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
When any SSD was not plugged, the bash script only sets RST_BMC_U2
and POWER_U2 GPIOs low for SSD0. Instead set the corresponding GPIOs
low for all unplugged SSDs.
(From meta-quanta rev: 4ac9d5f6173debda19b9b0d5da6075a48407b390)
Change-Id: I914d74634f93506d7911fdd3e1b75b73073ccdcc
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit is to fix rescaling issue by ignoring Dbus min/max.
(From meta-quanta rev: a21cf339050e234df0060e67f3aa713010d4fe47)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I7f736537784f9ab2e380ff8b4a4deb0f38c3df1b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-quanta rev: 8274d4054b3f6e772f26f944227542e3f72d562a)
Change-Id: If782a70491c9f42ba65cc80d7cfeda20be2d8cfc
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The IPMB channel communicates with ME from the host.
(From meta-quanta rev: 34964359eca0e4e924b4c7191aea411e3aa7f3e4)
Signed-off-by: kfting <kfting@nuvoton.com>
Change-Id: Iac56c5feb455c66b7ae322ba33806b575972495b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable phosphor-pid-control to control FAN tach according eight temperature sensors.
There are six FANs in RunBMC and all controlled by PWM1, thus we only define one fan type sensor in .json file.
Consider FAN tach might be stopped then cause RunBMC sever hang, FAN tach will turn into full speed if swampd daemon dead unexpected.
(From meta-quanta rev: 1689d1e7e4ed67560f73eee673a06b25cb346e60)
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I52db7eeff8abd1573ee9b4a61bd6af4a1b624d9a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify gsj-ipmid-whitelist.conf for the gsj project.
- Enable whitelist by default.
(From meta-quanta rev: 7f62bc2c5a71b9275b8b636dd6daad000288b2f4)
Change-Id: I52363809de53fabb0c6609e0bc564bdcd69c2e75
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The parameters are specified in obmc-console related settings.
(From meta-quanta rev: b6cf219ae11ccce599e6839000901e2aa105adf5)
Signed-off-by: kfting <kfting@nuvoton.com>
Change-Id: I824ef331bdac1586a8cd55d39e159171f851f857
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update runbmc-nuvoton.cfg support below features
1. Enable PECI read CPU and DIMM tempature
2. Enable i2c slave mqueue for ipmb communication
3. Eanble UDC
(From meta-quanta rev: c3d7855baf24c9a6161476d7512ad8dbb113167e)
Change-Id: Idf8f14b1a00c5de387b401d32762e010d34bf351
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set gain value to tune current and power value of hotswap and
test on gsj board pass.
(From meta-quanta rev: 1217b67bfd1f908a61602132014254bdc5a3c943)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: Ifde1dfe5f239ab9df0460cd8d2e557a0d6049c6e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ensure that the IPMI daemon has come up before configuring the USB
network interface so that clients won't see failing requests before IPMI
is ready.
(From meta-quanta rev: 33a9371a5da1a2dcf14c7d5e30dc4acd043afd4b)
Change-Id: I3c936a6c128cace80ab08f513f362a3cfd02fdac
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OE-core master will be dropping warrior soon; zeus is the next release.
(From meta-quanta rev: bee6771b647c0da99af4d06a3f60b7445d8427aa)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I7c5f88138fffd3ef7649270bc2e44354450018a8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update runbmc-nuvoton machine config:
1) Add flash layout
2) Add machine features
3) Modify u-boot defconfig name with correct platform name
4) Rename npcm750-runbmc.dtb to npcm750-runbmc-olympus.dtb
(From meta-quanta rev: bf7821d16c6a8c94ec83bc0d2dfaf84ab0a4ac79)
Change-Id: I338602edb98eaa3bb228640845d7782372b9ab90
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The u-boot-nuvoton has been upgraded to 2019.01,
and we just use the versions in meta-nuvoton with
same branch.
(From meta-quanta rev: 453eb5b26f437b62dbb551aa8d786aee5e421dca)
Change-Id: I24d388cca7edf5956ab1829f43b756a7de95be68
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Nuvoton's full flash image includes also a bootloader called Bootblock,
and headers for it and for the u-boot. Generating headers and merging
the Bootblock and the u-boot are being done by Nuvoton's binary
generator tool (Bingo), which uses external paramteres from XML files
for that.
(From meta-quanta rev: 2306d68b4bdd85a7f07431a325abd3c10231b263)
Change-Id: I422ad0d8ad56f537a302385f4a8c584d05821cb4
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-quanta rev: 9bcdc320a7d1f049ea703de4dbecbc8013bfa2e5)
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Change-Id: Id6d2d050d43fc0fa0b90497a91be22e008e7f7b3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
QUANTABASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-quanta rev: 170929b6044497d12e65a6a2c5e7025262c9d783)
Change-Id: I12defd008e095db3227e5cd39261f942abd1406c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit changes fan read path so as not to trigger fan-fail utility
in phosphor-pid-control but dual-rotor-fail service.
(From meta-quanta rev: ccd4657416374d12b1b8bd1bf545cf9ba8527419)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: Ifbc868d751b0a6194c2768bcfdaa8a9e231819c3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Remove gbmc-psu-hardreset.target from google-ipmi-sys to get
DelayHardReset to return the expected unspecified error.
(From meta-quanta rev: c95abb8caea6e56de78f009338ed656518928566)
Signed-off-by: P.K. Lee <p.k.lee@quantatw.com>
Change-Id: I910d976c0b37b88523e3351ad83ce60124cd28df
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The fan speed is lowered to 90 duty for thermal issue.
(From meta-quanta rev: 39041e2fa1e5b816c09925411081acc30010f782)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I5a14320a3687326e710976f8bab9bfa65f3b2865
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add _append_gsj to the environment files variable in gsj's
phosphor-hwmon bbappend in order to avoid affecting platforms.
Tested: Built for gsj and conf files were installed
(From meta-quanta rev: 79cabcb4faac7fe6a2f927ea5b9158ac432d8b58)
Change-Id: I49ea81f98a4aadbbec47aa251cf4ffe4a44b243f
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit is to assign MAC address to eth1, usb0_dev, usb0_host and
eth0 ports. The address of eth1 is read from EEPROM, while others are
obtained by adding one, two and three to eth1 respectively. We will
randomly generate address of eth1 once an error occurs.
The randomly-generated MAC address is of the form "00:1B:24:XX:XX:XX".
(From meta-quanta rev: b1c33ab8eb04ccf7ac77df58dca661a964cce293)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I000f818058989af2fe1f9457e22b4568ce47a8d5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Modify fan threshold according to quanta thermal team
data and test on gsj board pass.
(From meta-quanta rev: faedc464d99c795be1805d280564709ee5c002f2)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I7e93a25fe8ee79ab1f3fba879249ecf9043e5c97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Install phosphor-pid-control and detect-fan-fail into the final image in
order to enable fan control on the gsj platform.
(From meta-quanta rev: f2b76d699c94976d38108141c8c6ebc7923a85da)
Change-Id: Ibaadcce5f4330428cdfc5db3f31ae9e9b7b6dcb1
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
While rpm of dual rotor are lower than critical threshold
of fan, the script would stop phosphor-pid-control.service
and set other rotors pwm to 255 until fail rotor recover,
which test on gsj board pass.
(From meta-quanta rev: 94311c532fef9231cd71f9da0a2817f6d6575e7a)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I1ed670a48b2de28dda6da2fdee2ea0ba2bc1802a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This change adds fan control function with following features.
1) Fans will be at full speed while rebooting or a sensor is not ready.
2) Detect different skus automatically.
(From meta-quanta rev: bf5dffe65b849f9548f75b3a18d05ef7e899c4a3)
Signed-off-by: Hank Liou <Hank.Liou@quantatw.com>
Change-Id: I9667e832109d6a06b6e4f6410de0df97481fd3fb
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update quanata-nvme-powerctrl process and
delete two duplication function and variable
init_once.sh:
1. Dump input pin information because of confirming HW signal.
2. HW POWER_U2 default is output high. If detect SSD is plugged, don't
need to initialize POWER_U2 again.
3. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then st
RST_BMC_U2 high.
nvme_powermanager.sh:
1. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then set
RST_BMC_U2 high.
2. Independent package for power control delete nvme_main DBus property
trigger and tranfer led trigger to nvem_main package.
(From meta-quanta rev: e689ff4990c9d76bb54c89f37831d23ff31993d2)
Change-Id: Idb1faff9f30785c5cc168adfe18173ea93e7a146
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add shared nvme_powerctrl_library script for mantain function
It could be easy review steps with specification.
(From meta-quanta rev: a9607d7703020f46598b28a4d1cea7be6997b47a)
Change-Id: I7d7471005d253a3a0cca6bbcc083d0bfcf7efbc6
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
in gsj.
- Set default TimeOwner to "Host"
- Set default TimeSyncMethod to "Manual"
(From meta-quanta rev: 5b11c82db0edf49711a8e81af12efb579b2c64fd)
Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Change-Id: Id9ed58fd24d064f798d8e01b2239dfdc516c4d00
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fix the quanta layer to be named "quanta-layer" to conform to
expectations. Also add missing boilerplate code to add recipes from
this layer. There are currently no recipes in this layer outside of
within a machine specification, but the change will prevent future bugs.
(From meta-quanta rev: 7cbfa54ecf5fb464dfd1a93090b9462261105f9c)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I1c0ac88ee4e502563ed89612657f230548d4b58d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add sensor ucd90160 to hwmon, modify exists sensor
threshold and test on gsj board pass.
(From meta-quanta rev: eb4958ddd1081f856c7876cac8a21b166fee28a7)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: I4a06978e081653ac27097342bc5cd2dd10816c7e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update design, process, test, todo subject included:
1. The new design follow PCI Express Card Electromechanical
Specification. It could review refer to specification section.
2. The new design and specification don't mention about SSD and LED
property so delete update led property and nvme_main property steps.
3. Update PCI clock function has been implemented so remove
TODO subject.
4. Improve initail power-up and service execute sequence.
5. Fix some grammer sentenses.
(From meta-quanta rev: 4d42bc87aa4aa61533572e2f9c4645cfe5a58745)
Change-Id: I622b7a054afc64f3fee5c37b29b99d856bb56558
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Change fru id test on gsj board pass.
(From meta-quanta rev: 13a9b58e3709db4fa9f449931934d5d457e0b079)
Signed-off-by: Duke Du <Duke.Du@quantatw.com>
Change-Id: Iccdc73fa39cdd22167ab82351c91887b340f6f24
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify M value of fan
- Change label P12V_BRIC_Current to P12V_BRIC_Curr
- Add led fault sensors
(From meta-quanta rev: d8ab351499b60975da4057f8c53dbaa2c9457461)
Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Change-Id: I68f42c48a0c19b935b0d281d3dce017315354068
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For mateched new design, the package will be independent.
1. This package will not depends on nvme.manager.service
and the log messages directly store on syslog.
2. The nvme_powermanager.service must wait for nvme_gpio.service
initial complete all GPIO setting.
(From meta-quanta rev: 5a161f129ac473c98b5fd07b4a152e697e02eef7)
Change-Id: I878a3de62dd0009d011122d1b0d3478931eaa852
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Remove the product info area fields as these aren't used in the new FRU
format.
Tested: Read HSBP FRU over ipmitool and the contents were as expected
(From meta-quanta rev: 55ef60d4021d3c76ebca8fc000542efc2685d89f)
Change-Id: I389df7d422e738827689415d7dcc0c714a96c045
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop workbook skeleton as it's now obsolete.
(From meta-quanta rev: 6b6f78519cff678e0135298e2fccd00193291e81)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ie1bd674ed2ec905b9d221447630091f3fc998a32
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop the inclusion of a package that is no longer provided.
(From meta-quanta rev: 3f1d96998c127c958c9f105adcf31072e451b134)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia64c547c1073541745a7fd2a336150e0e5e580b5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-quanta rev: 029742e6738abb943ebe74681435df99f31f4e72)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia0c21a2353f7d8e60b5981691c18ededa43dc6e1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away
Removes warning:
WARNING: No bb files matched BBFILE_PATTERN_quanta ''
(From meta-quanta rev: 745d571bfb21a95152a1f5a112f837f4fa321680)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I3b0f8acdd06ac9842a20a77efc5655966078ce1c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Commit GSJ project configurations.
1. Add configuration for u-boot-evn.
2. Update kernel configuration.
3. Add gsj suffix to some properties.
Tested: Build Quanta GSJ image and load on the GSJ BMC module.
Ensure that BMC boots to console successfully.
(From meta-quanta rev: fc91a4374e2576e940f9c70f34cfe5af9d0aa727)
Change-Id: I2de3b60db65f744bdc1a573efd063b999aa2536e
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|