Age | Commit message (Collapse) | Author | Files | Lines |
|
This was added with cde0f094f for libseccomp, but shortly after that
upstream moved libseccomp from meta-security to core (241c7d2e6). As
such, meta-security is no longer used or required.
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I371e54b11f6336720dfc6edf0ef733d22b7fb4f2
|
|
phosphor-dbus-monitor still uses autoconf and has a hard dependency on
phosphor-snmp, causing phosphor-snmp to be brought in on systems that
have no interest in using SNMP. The vast majority of systems do not
supply any config for phosphor-dbus-monitor, so the usage of it does not
seem wide enough to enable the IMAGE_FEATURE by default.
- Remove 'obmc-dbus-monitor' from IMAGE_FEATURE by default.
- Clean up all systems that manually remove the dbus-monitor feature or
package.
- Explicitly add the 'obmc-dbus-monitor' to the following systems:
- meta-ibm: all
- meta-inspur: fp5280g2
- meta-quanta: s6q
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iad6c4104466e21d1b9843dac964a634019eb6935
|
|
We want it to be possible to order units prior to the powercycle event
if state needs to be persisted prior to a powercycle.
We can also remove the time_delay functionality as this is now provided
globally by the gbmc-psu-hardreset.target.
Change-Id: I15b33e120be0246dd821d0dfe9d61b5aae7d1492
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
William A. Kennington III (1):
systemd: Handle PSU delay globally
Change-Id: Ia80f0c4f230cc08e4344c2b53acdb6ffb1d2dbef
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Per [1][2], Yocto is starting to deprecate ABORT and has replaced
the "ABORT" action in BB_DISKMON_DIRS entries with "HALT".
1. https://wiki.yoctoproject.org/wiki/Inclusive_language
2. https://git.yoctoproject.org/poky/commit/?id=4f77505d94a8f6260933f457e9848d1d2fa98ce5
Tested:
Built obmc-phosphor-image successfully and eliminate the following
warnings:
```
WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to
"HALT", update configuration
```
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: If57d0ded9fac41e23b31b01e2a0e309ac7388148
|
|
New systems should be using the 'use-json' model by default, but it
currently requires a bbappend in order to enable it. Automatically
detect based on the PREFERRED_PROVIDER of virtual/...-config-native if
the intended use is JSON or YAML.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ie674d1b901395b4fd41838b6e978ca1ff00b0277
|
|
1. Fix the sytle of systemd-conf.bbappend to wrap with 80 characters.
2. Add usb0 network interface.
3. Disable ipv4 link-local address to avoid routing problems.
Tested:
Set the host's network interface to a link-local address and
successfully communicate with the BMC via usb0.
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: I9e6a9946a2beb8cf85872abe1919e92052fe46cc
|
|
The phosphor-watchdog_%.bbappend has a syntax error of colon.
Tested:
built image successfully and solved the warning message.
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: If8bd002e6f140c145c56b7bd0964ad415158d619
|
|
Add heartbeat LED and identification LED for S6Q.
Tested:
The LEDs work properly according to their function.
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: I3abde7552b7ebd415ae77e21e51c699c5b9f5474
|
|
Add inventory yaml and enable SEL option to trigger an alarm.
Tested:
Using settable temperature of ExternalSensor to trigger UCT/LCT signel.The result is verified on S6Q board.
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I72f3cc553e78864524761e541bdd6f56469ce290
|
|
* Deprecate N-1 release (hardknott).
* Enable N+1 release (kirkstone).
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
|
|
Noticed that the " were right next to = sign with no spaces. Added
a space between =" in the bbappend file.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I957610d65d1465f268b3b93b4ff565d36020f09f
|
|
Commit 605c37cb989a95c02633fcb93efb45102781b4bb switched the tree to use
'package_ipk' instead of 'package_rpm'. Since then a few other systems
have gone in which used an old package setting. Sync them to use IPK.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iecd2f65871038d6139c87f910c7c7fb19a115067
|
|
Add configuration to store sensor.
Add CPU temperatur sensor by using virtual sensor to get maximum value between DTS_CPU and Die_CPU.
Tested:
using 'ipmitool sdr type' command and Redfish client command to verify on S6Q board.
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I324230922e03f60c080858150b476c3f50fb62d6
|
|
Add service files to enable ipmitool watchdog command.
Tested:
1.setting watchdog action hard reset
~# ipmitool raw 0x06 0x24 0x01 0x01 0x01 0x02 0x64 0x00
starting reset
~# ipmitool raw 0x06 0x22
2.power off
~# ipmitool raw 0x06 0x24 0x01 0x02 0x01 0x02 0x64 0x00
~# ipmitool raw 0x06 0x22
3.power cycle
~# ipmitool raw 0x06 0x24 0x01 0x02 0x01 0x02 0x64 0x00
~# ipmitool raw 0x06 0x22
Use these commands to verify the result matches service settings.
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I738d0d86b6a9729d488f22e841e207aaab219796
|
|
Enable the BIOS boot type. Add 'boot_type' option for phosphor-settings-manager to support both EFI and Legacy boot.
Tested:
~# ipmitool raw 0x00 0x09 0x05 0x00 0x00
01 05 60 00 00 00 00
~# ipmitool chassis bootparam get 5
Boot parameter version: 1
Boot parameter 5 is valid/unlocked
Boot parameter data: 6000000000
Boot Flags :
BIOS EFI boot
~# ipmitool raw 0x00 0x08 0x05 0x80 0x00 0x00 0x00 0x00
~# ipmitool raw 0x00 0x09 0x05 0x00 0x00
01 05 80 00 00 00 00
~# ipmitool chassis bootparam get 5
Boot parameter version: 1
Boot parameter 5 is valid/unlocked
Boot parameter data: 8000000000
Boot Flags :
BIOS PC Compatible (legacy) boot
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I3ff030dd65fad1a2492c20a6622c6dce68832b45
|
|
The MAINTAINERS files are no longer used and are out of date (references
to IRC still exist in most of them). Remove them and rely on the OWNERS
exclusively.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
|
|
As mentioned by I970e06ca6f9d0a9792af122eb25da1bb9a06f058, append and
remove directives with '+=' are no longer valid Yocto syntax and raise a
warning.
See https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n40
One interesting caveat has to do with the difference between "append"
and "+=".
foo:append = "a"
foo:append = "b"
Results in `foo = "ab"`, but
foo += "a"
foo += "b"
Results in `foo = "a b"`. When `:append +=` is used it has behavior
like the `+=` operator. Therefore, in some cases we need to insert
additional whitespace after the `:append = "` to ensure concatenation
behaves as expected. I've manually reviewed the results to ensure there
is no ill side-effects from an additional space potentially being added.
Fix up the entire tree with the following one-liner (and similar for
`remove`):
git ls-files -- ':!:poky/**' ':!:meta-security/**' \
':!:meta-raspberrypi/**' ':!:meta-openembedded/**' \
| grep "\.bb" | xargs grep -l ":append.*+=" \
| xargs sed -i 's/:append\(.*\)+=\([^"]*\)" */:append\1=\2" /'
or ...
| xargs grep -l ":remove.*+=" \
| xargs sed -i "s/:remove\(.*\)+=/:remove\1=/"
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iea6235e7c76e252f4d473652957c2925f6b8845a
|
|
e.g.
install: cannot stat '/home/peter/openbmc/build/quanta-q71l/tmp/work/armv5e-openbmc-linux-gnueabi/quanta-powerctrl/1.0-r0init_once.sh': No such file or directory
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: I40ff36dd1b640c5410c79fbd91642f658d9cc2b7
|
|
e.g.
ERROR: Nothing RPROVIDES 'virtual-obmc-system-mgmt' (but /home/peter/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb RDEPENDS on or otherwise requires it)
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: I40f1dc3537073dbf02a702c9f1f64ada36384179
|
|
e.g.
ERROR: Nothing RPROVIDES 'virtual-obmc-system-mgmt' (but /home/peter/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb RDEPENDS on or otherwise requires it)
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: I6da15718cbe2741647fbc5531e8fa989909ca46a
|
|
e.g.
WARNING: /home/peter/openbmc/meta-quanta/meta-q71l/recipes-phosphor/ipmi/q71l-ipmi-inventory-map-native.bb: QA Issue: q71l-ipmi-inventory-map-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-ipmi-fru.bbclass [native-last]
WARNING: /home/peter/openbmc/meta-quanta/meta-q71l/recipes-phosphor/ipmi/q71l-ipmi-sensor-map-native.bb: QA Issue: q71l-ipmi-sensor-map-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-ipmi-host.bbclass [native-last]
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: I001b0b0d38067f4533748f5bf0f49de03f238ce9
|
|
e.g.
WARNING: /home/peter/openbmc/meta-quanta/meta-f0b/recipes-phosphor/ipmi/f0b-ipmi-inventory-map-native.bb: QA Issue: f0b-ipmi-inventory-map-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-ipmi-fru.bbclass [native-last]
WARNING: /home/peter/openbmc/meta-quanta/meta-f0b/recipes-phosphor/ipmi/f0b-ipmi-fru-read-inventory-native.bb: QA Issue: f0b-ipmi-fru-read-inventory-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-ipmi-host.bbclass [native-last]
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: I3bc1e1cc2e581b0b191e191e32cfdbd6e2e278b7
|
|
Set the max size to 512 since 0x300 is used for something else.
Change-Id: Ic7772247cb3cbcff4a27a12a4f85be97fd6b0b4d
Signed-off-by: Willy Tu <wltu@google.com>
|
|
This settings is according to IPMI SPEC chassis capabilities to provide intrusion sensor.
Adding chassis intrusion sensor monitor to implement 'ChassisIntrusionEnabled' property functionally.
Tested:
get chassis capabilities, first 01 is meant to enable intrusion sensor
~# ipmitool raw 0x00 0x00
01 20 20 20 20 20
check the intrusion sensor Status
~# systemctl status xyz.openbmc_project.intrusionsensor.service
● xyz.openbmc_project.intrusionsensor.service - Intrusion Sensor
Loaded: loaded (/lib/systemd/system/xyz.openbmc_project.intrusionsensor.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2022-01-10 01:53:48 UTC; 10min ago
Main PID: 478 (intrusionsensor)
CGroup: /system.slice/xyz.openbmc_project.intrusionsensor.service
└─478 intrusionsensor
then, set no provided any chassis capabilities function.
~# ipmitool raw 0x00 0x05 0x00 0x20 0x20 0x20 0x20 0x20
check chassis capabilities status.
~# ipmitool raw 0x00 0x00
00 20 20 20 20 20
now, intrusion sensor is not provided.
~# systemctl status xyz.openbmc_project.intrusionsensor.service
○ xyz.openbmc_project.intrusionsensor.service - Intrusion Sensor
Loaded: loaded (/lib/systemd/system/xyz.openbmc_project.intrusionsensor.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Mon 2022-01-10 02:05:44 UTC; 5s ago
Process: 478 ExecStart=/usr/bin/env intrusionsensor (code=killed, signal=TERM)
Main PID: 478 (code=killed, signal=TERM)
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: Ib3e3811f9ae9ab79dab52921fb0e6e065d44c444
|
|
phosphor-ipmi-ipmb: Enable ME communication
Tested:
root@s6q-dev:~# busctl tree xyz.openbmc_project.Ipmi.Channel.Ipmb
`-/xyz
`-/xyz/openbmc_project
`-/xyz/openbmc_project/Ipmi
`-/xyz/openbmc_project/Ipmi/Channel
`-/xyz/openbmc_project/Ipmi/Channel/Ipmb
Use 'busctl call xyz.openbmc_project.Ipmi.Channel.Ipmb \
/xyz/openbmc_project/Ipmi/Channel/Ipmb org.openbmc.Ipmb \
sendRequest yyyyay 1 6 0 0x1 0'
to get device id
Signed-off-by: Tim Chao <Tim.Chao@quantatw.com>
Change-Id: I01af849bbe3c290dda88969267f092c11bf9e8fc
|
|
The power restore policy can be set to "AlwaysOn","Restore" or "None".
Set power policy to Restore by default.
Tested:
~# ipmitool chassis status
Power Restore Policy : previous
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I48baef59461233276b2402a3a61b89a5e3eaa3a4
|
|
This commit enables sync-mac and nic-ethtool in the phosphor-network.
The "sync-mac" function can initialize the mac address on first boot, if it can find the object in the inventory.
When phosphor-network triggers systemd to set the mac address, it must be set together with the interface enslaved by bond.
And "nic-ethtool" provides the necessary data through network interface analysis.
Tested:
Check the network object if it worked.
~# busctl introspect xyz.openbmc_project.Network /xyz/openbmc_project/network/bond0
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: I63d80b4491f3aa42cae401658a189acaaddb592f
|
|
OperatingSystemState property of
xyz.openbmc_project.State.OperatingSystem.Status should be PDI enum of
type OSStatus.
This commit fixes values to be compatible with PDI.
Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Change-Id: I3e0af91f5ec8f0d9e5f6f722f8161386b9c7b430
|
|
Add fru setting config and device json file.
Tested:
~# ipmitool mc info
Device ID : 32
Device Revision : 1
Firmware Revision : 0.00
IPMI Version : 2.0
Manufacturer ID : 7244
Manufacturer Name : Quanta Computer Inc.
Product ID : 13905 (0x3651)
Product Name : Unknown (0x3651)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SEL Device
FRU Inventory Device
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00
~# ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
Board Mfg Date : Mon Jan 17 07:40:00 2022 UTC
Board Mfg : Quanta
Board Product : S6Q_Openbmc
Board Serial : QCTQTW213400001
Board Part Number : 1100827-01
FRU Device Description : mainboard (ID 1)
Board Mfg Date : Sat Sep 4 17:44:00 2021 UTC
Board Mfg : Quanta Cloud Technology Inc.
Board Product : S6Q-MB-RTT
Board Serial : RTTQTW12500077
Board Part Number : 31S6QMB0000
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: Id7d8d6a330eb4b698b2933189eec35e0b48fc700
|
|
mac-address bitbake recipe in meta-quanta/meta-common points to a
quanta-bmc github. This is not allowed on our meta layer projects,
especially on our "first class machine" like gsj which is part of our CI
process. Remove from gsj for now, consider removing from meta-common
completely if it's not moved out of quanta-bmc.
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: Ic2d97450abe8d3f532e6ad9b66a98430ce6bf3a5
|
|
Standard output/error type syslog is obsolete.
Update all unit files, and remove the setting altogether.
Signed-off-by: David Wang <davidwang@quantatw.com>
Change-Id: I9d38713dadd5cca85f0b96f8c217df8afa145add
|
|
Enable the ipmi chassis capabilities command.
Tested:
~# ipmitool raw 0x00 0x00
01 20 20 20 20 20
~# ipmitool raw 0x00 0x05 0x00 0x20 0x20 0x20 0x20 0x20
~# ipmitool raw 0x00 0x00
00 20 20 20 20 20
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: Id35c6cbb78104c474d32de2f4df430565ff428e8
|
|
Enable the SEL threshold and watchdog event monitoring.
Tested:
raise the "CriticalLow" value of the "Volt_PGPPA" sensor to trigger SEL
~# cat /var/log/ipmi_sel
2022-01-20T07:20:53.459340+00:00 1,2,526A6C,20,/xyz/openbmc_project/sensors/voltage/Volt_PGPPA,1
Signed-off-by: Joseph Fu <joseph.fu@quantatw.com>
Change-Id: I622f7cd1bf23dbee102cd3064f0180ec36595b66
|
|
Specify bond0 as the channel 1 for ipmi rmcpp interface.
Tested:
Use bond0 as the channel 1 used by ipmi. Check with "ipmitool lan print 1"
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: I2599f4e2a7ea311d88ce1ed0581fcf115680103e
|
|
Add network bonding configuration and name resolution configuration for S6Q.
Tested:
There are two interfaces eth0 and eth1 bonded to bond0. Bonding details can be found at /proc/net/bonding/bond0.
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: Ic11fbc3a8ea3ac4859e60a62288e9c2e03f6f41e
|
|
e.g.
WARNING: /opt/openbmc/meta-quanta/meta-gsj/recipes-phosphor/ipmi/gsj-ipmi-fru-read-inventory-native.bb: QA Issue: gsj-ipmi-fru-read-inventory-native: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: phosphor-ipmi-host.bbclass [native-last]
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: Ic32ef5bb09193366e049c0838bcdca4218baad86
|
|
Per [1], Yocto is going to start requiring both branch names and
`protocol=https` in GitHub SRC_URI variables. Ran the upstream tool to
automatically fix our URIs.
1. https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n10
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5f9619f7ff707050b469ae74c8aa16846568c5e4
|
|
These config files contains the gpio configuartion which will be used by
the x86 power control.
Tested: Tested and verified in S6Q.
Change-Id: I3e2684b2d7b0e6f3c6eb874569d5c82f6b733e02
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
|
|
This sets u-boot to the package containing the v2016.07-aspeed-openbmc
branch. This ensures there will be no change if the default changes in
the future.
Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This sets u-boot to the package containing the v2016.07-aspeed-openbmc
branch. This ensures there will be no change if the default changes in
the future.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Iaf709343b966c39ca707a10ef57fa0010bf6eb6f
|
|
iotools were being pulled by default via meta-google's
obmc-phosphor-image.bbappend. This was taken out by:
https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/49827
Add it to the .bb that actually uses and requires it as RDEPENDS
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I63063010d249c451f4dcb3b8fb4939c74da4d54f
|
|
Initial introduction of Quanta S6Q family equipped with Aspeed 2600 BMC
SoC.
Tested:
1. Build Quanta S6Q board and load on the target hardware.
2. Ensure that BMC boots to console.
Change-Id: Ia16d5fd6e38e2191908c0bec44cb412be254a433
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
|
|
This layer has nothing in it. The current direction is for anything
architecture specific to end up in meta-phosphor. Remove this "layer"
so that it doesn't keep getting copied into new machines.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ied03175589840490bcd1eda8c704c73e224ba9a9
|
|
`BBLAYERS_NON_REMOVABLE` is obsolete and no longer required.
As it said by Yocto documentation it can be used by `Hob`
https://www.yoctoproject.org/docs/1.5.2/ref-manual/ref-manual.html#var-BBLAYERS_NON_REMOVABLE
that already removed since Yocto-2.1
https://www.yoctoproject.org/tools-resources/projects/hob
Change-Id: Ibc2d8268a9d837a81e9cf6b0131dba8d0a030a3f
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
|
|
Change the BIOS main flash label to 'bios-primary' from 'pnor'
for the bios-update.sh
ref: https://github.com/openbmc/linux/commit/2eea476
Signed-off-by: GeorgeHuang <george.hung@quantatw.com>
Change-Id: I208a24cd5f7956cc3461986eb0aed0348c186ebf
|
|
We want the machine layer to be guaranteed to override our top-level
layers.
Change-Id: I9737762255be61e5af2c32881d7024133f72bf1e
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
We want the machine layer to be guaranteed to override our top-level
layers.
Change-Id: Ib071dad5b43c112d729bf7f85f36a9f6bd571b31
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Change-Id: I8e6712aaed3a4698d65984fa5081c1a400a686be
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|