summaryrefslogtreecommitdiff
path: root/meta-tyan
AgeCommit message (Collapse)AuthorFilesLines
2023-11-25treewide: add scarthgap to LAYERSERIES_COMPAT2.16.0-devPatrick Williams3-3/+3
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
2023-11-24treewide: add nanbield to LAYERSERIES_COMPATPatrick Williams3-3/+3
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
2023-09-26linux-aspeed: Move to Linux v6.5Joel Stanley2-2/+2
This moves the OpenBMC kernel to a v6.5 base for ASPEED. The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device tress are now under an 'aspeed' subdirectory. This change means systems must describe the KERNEL_DEVICETREE with the aspeed directory prefix. There are 78 patches in the tree, with 40 of those patches not yet queued for merging in v6.6. The remaining out of tree patches include: Andrew Jeffery (6): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface Cédric Le Goater (1): /dev/mem: add a devmem kernel parameter to activate the device Eddie James (16): ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl soc: aspeed: xdma: Add trace events i2c: core: Add mux root adapter operations iio: si7020: Lock root adapter to wait for reset eeprom: ee1004: Enable devices on multiple busses dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom eeprom: ee1004: Add OF matching support leds: pca955x: Refactor with helper functions and renaming leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Optimize probe led selection leds: pca955x: Add HW blink support leds: Ensure hardware blinking turns off when requested Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (14): net: ftgmac100: Ensure tx descriptor updates are visible ARM: aspeed: Add debugfs directory ARM: soc: aspeed: Add secure boot controller support dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM ARM: dts: nuvoton: npmc750-evb: Add default console tpm: tis-i2c: Add more compatible strings leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()" arm64: configs: Add Nuvoton NPCM defconfig ARM: configs: aspeed: Add new FSI drivers ARM: config: aspeed_g5: Enable SSIF BMC driver ARM: config: aspeed: Remove FIRMWARE_MEMMAP ARM: config: aspeed: Add Ampere SMPro drivers ARM: config: Add openbmc defconfig ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx Johannes Holland (1): dt-bindings: tpm: Add schema for TIS I2C devices Potin Lai (1): mtd: spi-nor: winbond: Add support for w25q01jvq Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-05-12Revert "Add socket-id for the first console"Andrew Jeffery1-1/+0
This reverts commit ec7cab9378f548e94ee4af83946b2583d1fc7194. ec7cab9378f5 ("Add socket-id for the first console") was only a partial fixup of the obmc-console configurations found in the tree. For historical reasons not all platforms that support multiple consoles install a client configuration file for all consoles. Instead they relied on some default behaviour that was removed in obmc-console's 4e7186918599 ("Fixed broken dbus interface for multiple consoles"). Applying the configuration changes in the manner of ec7cab9378f5 ("Add socket-id for the first console") resulted in an asymmetric configuration between the client and server, breaking some SSH SOL instances. As of ae2460d0b8e8 ("obmc-console: Provide a default value for `console-id`.") in obmc-console the requirement to specify `socket-id`[^1] is lifted. Instead, the configuration can choose to override a default value. This restores the original behaviour and unbreaks SSH SOL. [^1]: Now an alias of the `console-id` configuration key Websocket and IPMI consoles remain broken. A fix is under development that also takes a proper approach to supporting multiple consoles in bmcweb, and the same solution pattern can be applied in ipmid. More discussion of the problems involved can be found here: https://amboar.github.io/notes/2023/05/08/happenings-in-obmc-console.html Change-Id: I274284c791758f336da6d6301dc523bac2b5dd69 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2023-04-21Add socket-id for the first consoleNinad Palsule1-0/+1
This drop adds socket-id for first console. This was left out before but with the new design this parameter is required and enforced by obmc-console code. It is decided to set "socket-id = console0" initially because that is the current path used by bmcweb but in future you can change this value to whatever is appropriate. The console information is now available through the DBUS interface. Each console server register it's object path on DBUS. The leaf node of the object path is used to create a console path. For example in the following console0 the leaf node "console0" is used to make up the console path and the GUI will use console path "/console/console0" to connect to the console. busctl tree xyz.openbmc_project.Console.console0 `-/xyz `-/xyz/openbmc_project `-/xyz/openbmc_project/console `-/xyz/openbmc_project/console/console0 Here is a discord thread where new design was discussed. https://discord.com/channels/775381525260664832/1083551792094249051 Tested: Tested on the rainier system. Related commits: 1) phosphor-dbus-interface: https://gerrit.openbmc.org/c/openbmc/phosphor-dbus-interfaces/+/61486 2) obmc-console: https://gerrit.openbmc.org/c/openbmc/obmc-console/+/62496 3) bmcweb: https://gerrit.openbmc.org/c/openbmc/bmcweb/+/62525 Change-Id: I5fd06f3aac69872a3e5032d592a9b59711795cfe Signed-off-by: Ninad Palsule <ninadpalsule@us.ibm.com>
2023-01-13yocto:mickledore: add support for new yocto layerAndrew Geissler3-3/+3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I8e54833ac78e540e9dd5011533d53ff9a3af6763
2022-09-30add langdale to compatible layerAndrew Geissler3-3/+3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
2022-09-12treewide: handle more upstream TEMPLATECONF movePatrick Williams2-0/+0
We also need to move the conf-notes.txt files. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ic44e015c0216b526de4fec277ad42f162bca1f33
2022-09-09treewide: handle upstream TEMPLATECONF movePatrick Williams4-0/+0
The latest poky commit is requiring us to have all of our template configs in a subdirectory instead of directly in the `conf` directory. Without this we end up with errors during setup like: ``` Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name ``` Fix this by moving all of our template files into the 'default' template subdirectory (following the pattern of poky) and modifying `setup` as necessary to follow. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
2022-04-30treewide: remove meta-perlPatrick Williams2-2/+0
The only recipes which use content from meta-perl are openpower machines: ``` meta-openpower/recipes-bsp/pdata/pdata_git.bb: libxml-libxml-perl-native \ meta-yadro/meta-nicole/recipes-phosphor/logging/openpower-esel-parser_git.bb: libxml-libxml-perl-native \ ``` Remove meta-perl from the bblayers of every layer except openpower machines. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I51f1a8fbfbe879295c64d2339fc115dbd8823681
2022-04-22treewide: drop unused meta-security layerBrad Bishop2-2/+0
This was added with cde0f094f for libseccomp, but shortly after that upstream moved libseccomp from meta-security to core (241c7d2e6). As such, meta-security is no longer used or required. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Change-Id: I371e54b11f6336720dfc6edf0ef733d22b7fb4f2
2022-04-12treewide: Update BB_DISKMON_DIRS useGeorge Liu2-8/+8
Per [1][2], Yocto is starting to deprecate ABORT and has replaced the "ABORT" action in BB_DISKMON_DIRS entries with "HALT". 1. https://wiki.yoctoproject.org/wiki/Inclusive_language 2. https://git.yoctoproject.org/poky/commit/?id=4f77505d94a8f6260933f457e9848d1d2fa98ce5 Tested: Built obmc-phosphor-image successfully and eliminate the following warnings: ``` WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to "HALT", update configuration ``` Signed-off-by: George Liu <liuxiwei@inspur.com> Change-Id: If57d0ded9fac41e23b31b01e2a0e309ac7388148
2022-03-01tyan, s8036: Initial commit for TYAN S8036Ali El-Haj-Mahmoud8-0/+85
The TYAN S8036 is a server mainboard with an Aspeed AST2500 BMC. Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com> Change-Id: I80b01ce83fb3538945ddd34f28e38f0cb3c20fc8
2022-02-26treewide: remove image-prelink bbclass usagePatrick Williams1-1/+1
Upstream has removed the image-prelink bbclass[1], so remove it from any local.conf.sample that still has it enabled. 1. https://git.openembedded.org/openembedded-core/commit/?id=857baaf9e3d181ca18264e85d90b899fd94acff9 Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I70f42f8816f5dea207fcf5c34837d6796b3f6bb6
2022-02-26treewide: support yocto kirkstone releasePatrick Williams2-2/+2
* Deprecate N-1 release (hardknott). * Enable N+1 release (kirkstone). Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
2022-02-24various: sync package_ipkPatrick Williams1-1/+1
Commit 605c37cb989a95c02633fcb93efb45102781b4bb switched the tree to use 'package_ipk' instead of 'package_rpm'. Since then a few other systems have gone in which used an old package setting. Sync them to use IPK. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iecd2f65871038d6139c87f910c7c7fb19a115067
2022-01-18u-boot: Specify u-boot package for AST2500 machinesJoel Stanley1-0/+3
This sets u-boot to the package containing the v2016.07-aspeed-openbmc branch. This ensures there will be no change if the default changes in the future. Change-Id: Iea12e1691dbdda34a3f95d6d0862add0b15bcf37 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-12-21tyan, s7106: Initial commit for TYAN S7106Oskar Senft18-0/+257
The TYAN S7106 is a server mainboard with an Aspeed AST2500 BMC. Signed-off-by: Oskar Senft <osk@google.com> Change-Id: I75e4938bbc7d25bd8e949a4bae5761205aa0ff22
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-28 13:41:51 +0300