From 23148bd56ea408b6ee4a7fb53b8405c738db2055 Mon Sep 17 00:00:00 2001 From: Chau Ly Date: Fri, 13 Jan 2023 04:18:51 +0000 Subject: meta-ampere: mtmitchell: Support host consoles logger This commit supports phosphor-hostlogger in STREAM mode, to forward the byte stream from obmc-console to rsyslog via the imuxsock module. The logs can be obtained in /var/log/. The logs are rotated by logrotate. The size threshold of cpu console is 256KB and the others are 64KB. Each log is polled every 1 minute to check if its file size exceeds the threshold to rotate it to the new file. Each console can be saved in up to 2 log files. Tested (CPU console): 1. Change the mux of CPU console to BMC $ ampere_uartmux_ctrl.sh 1 2 2. Connect to CPU SOL console $ ssh root@ -p 2200 3. Execute commands in the CPU SOL console => The console output on CPU SOL console will all be logged to /var/log/obmc-console-cpu.log => The log will be rotated to /var/log/obmc-console-cpu.log.1 if the original log file size exceeds 256KB every 1min poll Signed-off-by: Chau Ly Change-Id: I336bde09c4ef61ea68e05bef2c0b4e4298ea7959 --- .../console/obmc-console/ampere_uartmux_ctrl.sh | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'meta-ampere/meta-mitchell/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh') diff --git a/meta-ampere/meta-mitchell/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh b/meta-ampere/meta-mitchell/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh index 387cfcf92c..1d1fbed121 100644 --- a/meta-ampere/meta-mitchell/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh +++ b/meta-ampere/meta-mitchell/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh @@ -12,6 +12,21 @@ case "$1" in # CPU0 UART0 connects to BMC UART1 CONSOLE_PORT=0 ;; + 2) GPIO_UARTx_MODE0="uart2-mode0" + GPIO_UARTx_MODE1="uart2-mode1" + # CPU0 UART1 connects to BMC UART2 + CONSOLE_PORT=1 + ;; + 3) GPIO_UARTx_MODE0="uart3-mode0" + GPIO_UARTx_MODE1="uart3-mode1" + # CPU0 UART4 connects to BMC UART3 + CONSOLE_PORT=2 + ;; + 4) GPIO_UARTx_MODE0="uart4-mode0" + GPIO_UARTx_MODE1="uart4-mode1" + # CPU1 UART1 connects to BMC UART4 + CONSOLE_PORT=3 + ;; *) echo "Invalid UART port selection" exit 1 ;; -- cgit v1.2.3