summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLi Yang <leoli@freescale.com>2010-11-25 20:06:09 +0300
committerWolfgang Denk <wd@denx.de>2010-12-19 01:15:24 +0300
commit030955c2cad511e678b3804c7de650db6920de4e (patch)
treebe37f7075c6c859d7c0815f27879ad184c82abf5
parent63786d299defb7248932d551b38575d36c1f6a84 (diff)
downloadu-boot-030955c2cad511e678b3804c7de650db6920de4e.tar.xz
fsl_esdhc: Fix the voltage validation process
The current code use all the voltage range support by the host controller to do the validation. This will cause problem when the host supports Low Voltage Range. Change the validation voltage to be based on board setup. Signed-off-by: Li Yang <leoli@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--drivers/mmc/fsl_esdhc.c20
1 files changed, 15 insertions, 5 deletions
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 7bab2f66d7..40b136c176 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -444,7 +444,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
struct fsl_esdhc *regs;
struct mmc *mmc;
- u32 caps;
+ u32 caps, voltage_caps;
if (!cfg)
return -1;
@@ -462,14 +462,24 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc->set_ios = esdhc_set_ios;
mmc->init = esdhc_init;
+ voltage_caps = 0;
caps = regs->hostcapblt;
-
if (caps & ESDHC_HOSTCAPBLT_VS18)
- mmc->voltages |= MMC_VDD_165_195;
+ voltage_caps |= MMC_VDD_165_195;
if (caps & ESDHC_HOSTCAPBLT_VS30)
- mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+ voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & ESDHC_HOSTCAPBLT_VS33)
- mmc->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
+
+#ifdef CONFIG_SYS_SD_VOLTAGE
+ mmc->voltages = CONFIG_SYS_SD_VOLTAGE;
+#else
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+#endif
+ if ((mmc->voltages & voltage_caps) == 0) {
+ printf("voltage not supported by controller\n");
+ return -1;
+ }
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;