summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 07:21:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 07:21:08 +0300
commit167569343fac74ec6825a3ab982f795b5880e63e (patch)
tree965adb59fbe10d9f45a7fb90cb1ec1bc18d4613c
parentb240b419db5d624ce7a5a397d6f62a1a686009ec (diff)
parentcd903711fd9dce808b5cc07e509135886d962b0c (diff)
downloadlinux-167569343fac74ec6825a3ab982f795b5880e63e.tar.xz
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
-rw-r--r--Documentation/arm/Microchip/README (renamed from Documentation/arm/Atmel/README)52
-rw-r--r--Documentation/arm/stm32/overview.rst34
-rw-r--r--Documentation/arm/stm32/overview.txt33
-rw-r--r--Documentation/arm/stm32/stm32f429-overview.rst26
-rw-r--r--Documentation/arm/stm32/stm32f429-overview.txt22
-rw-r--r--Documentation/arm/stm32/stm32f746-overview.rst33
-rw-r--r--Documentation/arm/stm32/stm32f746-overview.txt34
-rw-r--r--Documentation/arm/stm32/stm32f769-overview.rst35
-rw-r--r--Documentation/arm/stm32/stm32h743-overview.rst34
-rw-r--r--Documentation/arm/stm32/stm32h743-overview.txt30
-rw-r--r--Documentation/arm/stm32/stm32mp157-overview.rst19
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/omap/mpu.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt44
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt50
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/renesas,rst.txt2
-rw-r--r--MAINTAINERS88
-rw-r--r--arch/arm/Kconfig54
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/pxa3xx.dtsi6
-rw-r--r--arch/arm/configs/bcm2835_defconfig4
-rw-r--r--arch/arm/configs/cm_x300_defconfig2
-rw-r--r--arch/arm/configs/davinci_all_defconfig3
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig9
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig28
-rw-r--r--arch/arm/configs/multi_v7_defconfig64
-rw-r--r--arch/arm/configs/mxs_defconfig14
-rw-r--r--arch/arm/configs/omap2plus_defconfig96
-rw-r--r--arch/arm/configs/oxnas_v6_defconfig93
-rw-r--r--arch/arm/configs/pxa3xx_defconfig3
-rw-r--r--arch/arm/configs/pxa_defconfig2
-rw-r--r--arch/arm/configs/raumfeld_defconfig2
-rw-r--r--arch/arm/configs/realview_defconfig21
-rw-r--r--arch/arm/configs/shmobile_defconfig9
-rw-r--r--arch/arm/configs/stm32_defconfig3
-rw-r--r--arch/arm/configs/versatile_defconfig18
-rw-r--r--arch/arm/include/debug/exynos.S7
-rw-r--r--arch/arm/include/debug/samsung.S10
-rw-r--r--arch/arm/mach-at91/Kconfig14
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c35
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c7
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c3
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c21
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c7
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c3
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c7
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c3
-rw-r--r--arch/arm/mach-davinci/clock.h3
-rw-r--r--arch/arm/mach-davinci/da830.c7
-rw-r--r--arch/arm/mach-davinci/da850.c7
-rw-r--r--arch/arm/mach-davinci/da8xx-dt.c3
-rw-r--r--arch/arm/mach-davinci/davinci.h4
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c57
-rw-r--r--arch/arm/mach-davinci/devices.c7
-rw-r--r--arch/arm/mach-davinci/dm355.c8
-rw-r--r--arch/arm/mach-davinci/dm365.c8
-rw-r--r--arch/arm/mach-davinci/dm644x.c8
-rw-r--r--arch/arm/mach-davinci/dm646x.c22
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h2
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h7
-rw-r--r--arch/arm/mach-davinci/time.c57
-rw-r--r--arch/arm/mach-davinci/usb-da8xx.c18
-rw-r--r--arch/arm/mach-exynos/exynos.c3
-rw-r--r--arch/arm/mach-exynos/pm.c8
-rw-r--r--arch/arm/mach-imx/Kconfig22
-rw-r--r--arch/arm/mach-imx/Makefile3
-rw-r--r--arch/arm/mach-imx/anatop.c56
-rw-r--r--arch/arm/mach-imx/avic.c37
-rw-r--r--arch/arm/mach-imx/cpu.c3
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6sl.c7
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6sx.c1
-rw-r--r--arch/arm/mach-imx/epit.c228
-rw-r--r--arch/arm/mach-imx/mach-imx6sl.c10
-rw-r--r--arch/arm/mach-imx/mxc.h6
-rw-r--r--arch/arm/mach-imx/pm-imx6.c7
-rw-r--r--arch/arm/mach-mmp/aspenite.c6
-rw-r--r--arch/arm/mach-mmp/ttc_dkb.c9
-rw-r--r--arch/arm/mach-npcm/Kconfig30
-rw-r--r--arch/arm/mach-npcm/Makefile4
-rw-r--r--arch/arm/mach-npcm/headsmp.S17
-rw-r--r--arch/arm/mach-npcm/npcm7xx.c20
-rw-r--r--arch/arm/mach-npcm/platsmp.c81
-rw-r--r--arch/arm/mach-nspire/nspire.c6
-rw-r--r--arch/arm/mach-omap1/Kconfig1
-rw-r--r--arch/arm/mach-omap1/common.h3
-rw-r--r--arch/arm/mach-omap1/i2c.c2
-rw-r--r--arch/arm/mach-omap1/i2c.h (renamed from arch/arm/plat-omap/include/plat/i2c.h)9
-rw-r--r--arch/arm/mach-omap1/pm.c2
-rw-r--r--arch/arm/mach-omap1/timer.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/Makefile16
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c4
-rw-r--r--arch/arm/mach-omap2/common.h7
-rw-r--r--arch/arm/mach-omap2/control.c20
-rw-r--r--arch/arm/mach-omap2/devices.c2
-rw-r--r--arch/arm/mach-omap2/hsmmc.c2
-rw-r--r--arch/arm/mach-omap2/i2c.h15
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/msdi.c1
-rw-r--r--arch/arm/mach-omap2/omap4-sar-layout.h2
-rw-r--r--arch/arm/mach-omap2/omap_device.c5
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c418
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.h7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c11
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c18
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c61
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c25
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c116
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_43xx_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c75
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c54
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c53
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_81xx_data.c31
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h1
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c86
-rw-r--r--arch/arm/mach-omap2/pm-asm-offsets.c31
-rw-r--r--arch/arm/mach-omap2/pm.h3
-rw-r--r--arch/arm/mach-omap2/pm33xx-core.c189
-rw-r--r--arch/arm/mach-omap2/sleep33xx.S214
-rw-r--r--arch/arm/mach-omap2/sleep43xx.S391
-rw-r--r--arch/arm/mach-omap2/sleep44xx.S7
-rw-r--r--arch/arm/mach-omap2/sr_device.c27
-rw-r--r--arch/arm/mach-omap2/timer.c2
-rw-r--r--arch/arm/mach-pxa/cm-x300.c14
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c8
-rw-r--r--arch/arm/mach-pxa/colibri.h2
-rw-r--r--arch/arm/mach-pxa/littleton.c10
-rw-r--r--arch/arm/mach-pxa/mxm8x10.c10
-rw-r--r--arch/arm/mach-pxa/pxa3xx-ulpi.c6
-rw-r--r--arch/arm/mach-pxa/raumfeld.c12
-rw-r--r--arch/arm/mach-pxa/zylonite.c10
-rw-r--r--arch/arm/mach-rockchip/platsmp.c1
-rw-r--r--arch/arm/mach-shmobile/common.h4
-rw-r--r--arch/arm/mach-shmobile/headsmp.S55
-rw-r--r--arch/arm/mach-shmobile/platsmp-apmu.c1
-rw-r--r--arch/arm/mach-shmobile/pm-rcar-gen2.c15
-rw-r--r--arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c25
-rw-r--r--arch/arm/mach-socfpga/pm.c1
-rw-r--r--arch/arm/mach-stm32/Kconfig46
-rw-r--r--arch/arm/mach-stm32/board-dt.c11
-rw-r--r--arch/arm/mach-sunxi/Kconfig7
-rw-r--r--arch/arm/mach-sunxi/Makefile3
-rw-r--r--arch/arm/mach-sunxi/mc_smp.c856
-rw-r--r--arch/arm/plat-omap/Kconfig6
-rw-r--r--arch/arm/plat-omap/Makefile1
-rw-r--r--arch/arm64/configs/defconfig39
-rw-r--r--drivers/bus/ti-sysc.c526
-rw-r--r--drivers/clocksource/Kconfig3
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/timer-ti-dm.c (renamed from arch/arm/plat-omap/dmtimer.c)286
-rw-r--r--drivers/mtd/nand/Kconfig11
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/marvell_nand.c3
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c2105
-rw-r--r--drivers/phy/ti/phy-da8xx-usb.c16
-rw-r--r--drivers/power/avs/smartreflex.c41
-rw-r--r--drivers/pwm/pwm-omap-dmtimer.c68
-rw-r--r--drivers/soc/renesas/Kconfig14
-rw-r--r--drivers/soc/renesas/Makefile2
-rw-r--r--drivers/soc/renesas/r8a77965-sysc.c37
-rw-r--r--drivers/soc/renesas/r8a77970-sysc.c12
-rw-r--r--drivers/soc/renesas/r8a77980-sysc.c52
-rw-r--r--drivers/soc/renesas/rcar-rst.c37
-rw-r--r--drivers/soc/renesas/rcar-sysc.c8
-rw-r--r--drivers/soc/renesas/rcar-sysc.h2
-rw-r--r--drivers/soc/renesas/renesas-soc.c16
-rw-r--r--drivers/soc/ti/Kconfig9
-rw-r--r--drivers/soc/ti/Makefile1
-rw-r--r--drivers/soc/ti/pm33xx.c349
-rw-r--r--include/clocksource/timer-ti-dm.h (renamed from arch/arm/plat-omap/include/plat/dmtimer.h)44
-rw-r--r--include/dt-bindings/power/r8a77965-sysc.h30
-rw-r--r--include/dt-bindings/power/r8a77980-sysc.h43
-rw-r--r--include/linux/clk/ti.h1
-rw-r--r--include/linux/platform_data/asoc-ti-mcbsp.h12
-rw-r--r--include/linux/platform_data/dmtimer-omap.h38
-rw-r--r--include/linux/platform_data/gpio-omap.h5
-rw-r--r--include/linux/platform_data/mtd-nand-pxa3xx.h43
-rw-r--r--include/linux/platform_data/phy-da8xx-usb.h21
-rw-r--r--include/linux/platform_data/pm33xx.h42
-rw-r--r--include/linux/platform_data/spi-omap2-mcspi.h8
-rw-r--r--include/linux/platform_data/ti-sysc.h50
-rw-r--r--include/linux/power/smartreflex.h10
-rw-r--r--include/linux/serial_s3c.h17
189 files changed, 4973 insertions, 3960 deletions
diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Microchip/README
index afb13c15389d..a366f37d38f1 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Microchip/README
@@ -1,54 +1,54 @@
-ARM Atmel SoCs (aka AT91)
-=========================
+ARM Microchip SoCs (aka AT91)
+=============================
Introduction
------------
-This document gives useful information about the ARM Atmel SoCs that are
+This document gives useful information about the ARM Microchip SoCs that are
currently supported in Linux Mainline (you know, the one on kernel.org).
-It is important to note that the Atmel | SMART ARM-based MPU product line is
-historically named "AT91" or "at91" throughout the Linux kernel development
-process even if this product prefix has completely disappeared from the
-official Atmel product name. Anyway, files, directories, git trees,
+It is important to note that the Microchip (previously Atmel) ARM-based MPU
+product line is historically named "AT91" or "at91" throughout the Linux kernel
+development process even if this product prefix has completely disappeared from
+the official Microchip product name. Anyway, files, directories, git trees,
git branches/tags and email subject always contain this "at91" sub-string.
AT91 SoCs
---------
Documentation and detailed datasheet for each product are available on
-the Atmel website: http://www.atmel.com.
+the Microchip website: http://www.microchip.com.
Flavors:
* ARM 920 based SoC
- at91rm9200
+ Datasheet
- http://www.atmel.com/Images/doc1768.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
* ARM 926 based SoCs
- at91sam9260
+ Datasheet
- http://www.atmel.com/Images/doc6221.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
- at91sam9xe
+ Datasheet
- http://www.atmel.com/Images/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
- at91sam9261
+ Datasheet
- http://www.atmel.com/Images/doc6062.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
- at91sam9263
+ Datasheet
- http://www.atmel.com/Images/Atmel_6249_32-bit-ARM926EJ-S-Microcontroller_SAM9263_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
- at91sam9rl
+ Datasheet
- http://www.atmel.com/Images/doc6289.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
- at91sam9g20
+ Datasheet
- http://www.atmel.com/Images/doc6384.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
- at91sam9g45 family
- at91sam9g45
@@ -56,7 +56,7 @@ the Atmel website: http://www.atmel.com.
- at91sam9m10
- at91sam9m11 (device superset)
+ Datasheet
- http://www.atmel.com/Images/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
- at91sam9x5 family (aka "The 5 series")
- at91sam9g15
@@ -65,11 +65,11 @@ the Atmel website: http://www.atmel.com.
- at91sam9x25
- at91sam9x35
+ Datasheet (can be considered as covering the whole family)
- http://www.atmel.com/Images/Atmel_11055_32-bit-ARM926EJ-S-Microcontroller_SAM9X35_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
- at91sam9n12
+ Datasheet
- http://www.atmel.com/Images/Atmel_11063_32-bit-ARM926EJ-S-Microcontroller_SAM9N12CN11CN12_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
* ARM Cortex-A5 based SoCs
- sama5d3 family
@@ -79,7 +79,7 @@ the Atmel website: http://www.atmel.com.
- sama5d35
- sama5d36 (device superset)
+ Datasheet
- http://www.atmel.com/Images/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
* ARM Cortex-A5 + NEON based SoCs
- sama5d4 family
@@ -88,7 +88,7 @@ the Atmel website: http://www.atmel.com.
- sama5d43
- sama5d44 (device superset)
+ Datasheet
- http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
- sama5d2 family
- sama5d21
@@ -99,7 +99,7 @@ the Atmel website: http://www.atmel.com.
- sama5d27 (device superset)
- sama5d28 (device superset + environmental monitors)
+ Datasheet
- http://www.atmel.com/Images/Atmel-11267-32-bit-Cortex-A5-Microcontroller-SAMA5D2_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
* ARM Cortex-M7 MCUs
- sams70 family
@@ -112,8 +112,6 @@ the Atmel website: http://www.atmel.com.
- sams70q19
- sams70q20
- sams70q21
- + Datasheet
- http://www.atmel.com/Images/Atmel-11242-32-bit-Cortex-M7-Microcontroller-SAM-S70Q-SAM-S70N-SAM-S70J_Datasheet.pdf
- samv70 family
- samv70j19
@@ -122,8 +120,6 @@ the Atmel website: http://www.atmel.com.
- samv70n20
- samv70q19
- samv70q20
- + Datasheet
- http://www.atmel.com/Images/Atmel-11297-32-bit-Cortex-M7-Microcontroller-SAM-V70Q-SAM-V70N-SAM-V70J_Datasheet.pdf
- samv71 family
- samv71j19
@@ -135,13 +131,15 @@ the Atmel website: http://www.atmel.com.
- samv71q19
- samv71q20
- samv71q21
+
+ Datasheet
- http://www.atmel.com/Images/Atmel-44003-32-bit-Cortex-M7-Microcontroller-SAM-V71Q-SAM-V71N-SAM-V71J_Datasheet.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf
+
Linux kernel information
------------------------
Linux kernel mach directory: arch/arm/mach-at91
-MAINTAINERS entry is: "ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES"
+MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
Device Tree for AT91 SoCs and boards
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 000000000000..85cfc8410798
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,34 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
+
+Configuration
+-------------
+
+For MCUs, use the provided default configuration:
+ make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+ make multi_v7_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+- Maxime Coquelin <mcoquelin.stm32@gmail.com>
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
deleted file mode 100644
index a03b0357c017..000000000000
--- a/Documentation/arm/stm32/overview.txt
+++ /dev/null
@@ -1,33 +0,0 @@
- STM32 ARM Linux Overview
- ========================
-
-Introduction
-------------
-
- The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
- and STM32F746 (Cortex-M7) are supported.
-
-
-Configuration
--------------
-
- A generic configuration is provided for STM32 family, and can be used as the
- default by
- make stm32_defconfig
-
-Layout
-------
-
- All the files for multiple machine families are located in the platform code
- contained in arch/arm/mach-stm32
-
- There is a generic board board-dt.c in the mach folder which support
- Flattened Device Tree, which means, it works with any compatible board with
- Device Trees.
-
-
-Document Author
----------------
-
- Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 000000000000..18feda97f483
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,26 @@
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors:
+
+Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
deleted file mode 100644
index 5206822bd8ef..000000000000
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ /dev/null
@@ -1,22 +0,0 @@
- STM32F429 Overview
- ==================
-
- Introduction
- ------------
- The STM32F429 is a Cortex-M4 MCU aimed at various applications.
- It features:
- - ARM Cortex-M4 up to 180MHz with FPU
- - 2MB internal Flash Memory
- - External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
- - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
- - LCD controller & Camera interface
- - Cryptographic processor
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
- Document Author
- ---------------
- Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 000000000000..b5f4b6ce7656
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,33 @@
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
deleted file mode 100644
index cffd2b1ccd6f..000000000000
--- a/Documentation/arm/stm32/stm32f746-overview.txt
+++ /dev/null
@@ -1,34 +0,0 @@
- STM32F746 Overview
- ==================
-
- Introduction
- ------------
- The STM32F746 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @216MHz
- - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
- Document Author
- ---------------
- Alexandre Torgue <alexandre.torgue@st.com>
-
-
-
-
-
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 000000000000..228656ced2fe
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,35 @@
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 000000000000..3458dc00095d
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,34 @@
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
deleted file mode 100644
index 3031cbae31a5..000000000000
--- a/Documentation/arm/stm32/stm32h743-overview.txt
+++ /dev/null
@@ -1,30 +0,0 @@
- STM32H743 Overview
- ==================
-
- Introduction
- ------------
- The STM32H743 is a Cortex-M7 MCU aimed at various applications.
- It features:
- - Cortex-M7 core running up to @400MHz
- - 2MB internal flash, 1MBytes internal RAM
- - FMC controller to connect SDRAM, NOR and NAND memories
- - Dual mode QSPI
- - SD/MMC/SDIO support
- - Ethernet controller
- - USB OTFG FS & HS controllers
- - I2C, SPI, CAN busses support
- - Several 16 & 32 bits general purpose timers
- - Serial Audio interface
- - LCD controller
- - HDMI-CEC
- - SPDIFRX
- - DFSDM
-
- Resources
- ---------
- Datasheet and reference manual are publicly available on ST website:
- - http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
- Document Author
- ---------------
- Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 000000000000..62e176d47ca7
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,19 @@
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b0328ff951d..29e1dc5d506d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ described below.
"actions,s500-smp"
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
+ "allwinner,sun9i-a80-smp"
"amlogic,meson8-smp"
"amlogic,meson8b-smp"
"arm,realview-smp"
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 763695db2bd9..f301e636fd52 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -13,6 +13,13 @@ Required properties:
Optional properties:
- sram: Phandle to the ocmcram node
+am335x and am437x only:
+- pm-sram: Phandles to ocmcram nodes to be used for power management.
+ First should be type 'protect-exec' for the driver to use to copy
+ and run PM functions, second should be regular pool to be used for
+ data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+ for more details.
+
Examples:
- For an OMAP5 SMP system:
@@ -36,3 +43,12 @@ mpu {
compatible = "ti,omap3-mpu";
ti,hwmods = "mpu";
};
+
+- For an AM335x system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ pm-sram = <&pm_sram_code
+ &pm_sram_data>;
+};
diff --git a/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
new file mode 100644
index 000000000000..082e6a9382d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
@@ -0,0 +1,44 @@
+Allwinner SRAM for smp bringup:
+------------------------------------------------
+
+Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
+primary core (cpu0). Once the core gets powered up it checks if a magic
+value is set at a specific location. If it is then the BROM will jump
+to the software entry address, instead of executing a standard boot.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Note that this is separate from the Allwinner SRAM controller found in
+../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
+any device.
+
+Also there are no "secure-only" properties. The implementation should
+check if this SRAM is usable first.
+
+Required sub-node properties:
+- compatible : depending on the SoC this should be one of:
+ "allwinner,sun9i-a80-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+ sram_b: sram@20000 {
+ /* 256 KiB secure SRAM at 0x20000 */
+ compatible = "mmio-sram";
+ reg = <0x00020000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00020000 0x40000>;
+
+ smp-sram@1000 {
+ /*
+ * This is checked by BROM to determine if
+ * cpu0 should jump to SMP entry vector
+ */
+ compatible = "allwinner,sun9i-a80-smp-sram";
+ reg = <0x1000 0x8>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
deleted file mode 100644
index d4ee4da58463..000000000000
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-PXA3xx NAND DT bindings
-
-Required properties:
-
- - compatible: Should be set to one of the following:
- marvell,pxa3xx-nand
- marvell,armada370-nand
- marvell,armada-8k-nand
- - reg: The register base for the controller
- - interrupts: The interrupt to map
- - #address-cells: Set to <1> if the node includes partitions
- - marvell,system-controller: Set to retrieve the syscon node that handles
- NAND controller related registers (only required
- with marvell,armada-8k-nand compatible).
-
-Optional properties:
-
- - dmas: dma data channel, see dma.txt binding doc
- - marvell,nand-enable-arbiter: Set to enable the bus arbiter
- - marvell,nand-keep-config: Set to keep the NAND controller config as set
- by the bootloader
- - num-cs: Number of chipselect lines to use
- - nand-on-flash-bbt: boolean to enable on flash bbt option if
- not present false
- - nand-ecc-strength: number of bits to correct per ECC step
- - nand-ecc-step-size: number of data bytes covered by a single ECC step
-
-The following ECC strength and step size are currently supported:
-
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
-
-Example:
-
- nand0: nand@43100000 {
- compatible = "marvell,pxa3xx-nand";
- reg = <0x43100000 90>;
- interrupts = <45>;
- dmas = <&pdma 97 0>;
- dma-names = "data";
- #address-cells = <1>;
-
- marvell,nand-enable-arbiter;
- marvell,nand-keep-config;
- num-cs = <1>;
-
- /* partitions (optional) */
- };
-
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 8690f10426a3..ab399e559257 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,7 +17,9 @@ Required properties:
- "renesas,r8a7794-sysc" (R-Car E2)
- "renesas,r8a7795-sysc" (R-Car H3)
- "renesas,r8a7796-sysc" (R-Car M3-W)
+ - "renesas,r8a77965-sysc" (R-Car M3-N)
- "renesas,r8a77970-sysc" (R-Car V3M)
+ - "renesas,r8a77980-sysc" (R-Car V3H)
- "renesas,r8a77995-sysc" (R-Car D3)
- reg: Address start and address range for the device.
- #power-domain-cells: Must be 1.
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a8014f3ab8ba..294a0dae106a 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,7 +26,9 @@ Required properties:
- "renesas,r8a7794-rst" (R-Car E2)
- "renesas,r8a7795-rst" (R-Car H3)
- "renesas,r8a7796-rst" (R-Car M3-W)
+ - "renesas,r8a77965-rst" (R-Car M3-N)
- "renesas,r8a77970-rst" (R-Car V3M)
+ - "renesas,r8a77980-rst" (R-Car V3H)
- "renesas,r8a77995-rst" (R-Car D3)
- reg: Address start and address range for the device.
diff --git a/MAINTAINERS b/MAINTAINERS
index 8fa200fddd16..2f983928d74c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1242,27 +1242,6 @@ M: Boris Brezillon <boris.brezillon@free-electrons.com>
S: Maintained
F: drivers/clk/at91
-ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-M: Alexandre Belloni <alexandre.belloni@bootlin.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.linux4sam.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
-S: Supported
-N: at91
-N: atmel
-F: arch/arm/mach-at91/
-F: include/soc/at91/
-F: arch/arm/boot/dts/at91*.dts
-F: arch/arm/boot/dts/at91*.dtsi
-F: arch/arm/boot/dts/sama*.dts
-F: arch/arm/boot/dts/sama*.dtsi
-F: arch/arm/include/debug/at91.S
-F: drivers/memory/atmel*
-F: drivers/watchdog/sama5d4_wdt.c
-X: drivers/input/touchscreen/atmel_mxt_ts.c
-X: drivers/net/wireless/atmel/
-
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1583,15 +1562,6 @@ ARM/MAGICIAN MACHINE SUPPORT
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
-ARM/Marvell Berlin SoC support
-M: Jisheng Zhang <jszhang@marvell.com>
-M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-berlin/
-F: arch/arm/boot/dts/berlin*
-F: arch/arm64/boot/dts/marvell/berlin*
-
ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
@@ -1662,6 +1632,27 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-ks8695/
S: Odd Fixes
+ARM/Microchip (AT91) SoC support
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+M: Alexandre Belloni <alexandre.belloni@bootlin.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.linux4sam.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
+S: Supported
+N: at91
+N: atmel
+F: arch/arm/mach-at91/
+F: include/soc/at91/
+F: arch/arm/boot/dts/at91*.dts
+F: arch/arm/boot/dts/at91*.dtsi
+F: arch/arm/boot/dts/sama*.dts
+F: arch/arm/boot/dts/sama*.dtsi
+F: arch/arm/include/debug/at91.S
+F: drivers/memory/atmel*
+F: drivers/watchdog/sama5d4_wdt.c
+X: drivers/input/touchscreen/atmel_mxt_ts.c
+X: drivers/net/wireless/atmel/
+
ARM/MIOA701 MACHINE SUPPORT
M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1706,6 +1697,20 @@ F: Documentation/devicetree/bindings/arm/ste-*
F: Documentation/devicetree/bindings/arm/ux500/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
+ARM/NUVOTON NPCM ARCHITECTURE
+M: Avi Fishman <avifishman70@gmail.com>
+M: Tomer Maimon <tmaimon77@gmail.com>
+R: Patrick Venture <venture@google.com>
+R: Nancy Yuen <yuenn@google.com>
+R: Brendan Higgins <brendanhiggins@google.com>
+L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
+S: Supported
+F: arch/arm/mach-npcm/
+F: arch/arm/boot/dts/nuvoton-npcm*
+F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F: drivers/*/*npcm*
+F: Documentation/*/*npcm*
+
ARM/NUVOTON W90X900 ARM ARCHITECTURE
M: Wan ZongShun <mcuos.com@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1968,6 +1973,14 @@ M: Thor Thayer <thor.thayer@linux.intel.com>
S: Maintained
F: drivers/edac/altera_edac.
+ARM/SPREADTRUM SoC SUPPORT
+M: Orson Zhai <orsonzhai@gmail.com>
+M: Baolin Wang <baolin.wang@linaro.org>
+M: Chunyan Zhang <zhang.lyra@gmail.com>
+S: Maintained
+F: arch/arm64/boot/dts/sprd
+N: sprd
+
ARM/STI ARCHITECTURE
M: Patrice Chotard <patrice.chotard@st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2010,6 +2023,15 @@ F: arch/arm/boot/dts/stm32*
F: arch/arm/mach-stm32/
F: drivers/clocksource/armv7m_systick.c
+ARM/Synaptics Berlin SoC support
+M: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
+M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-berlin/
+F: arch/arm/boot/dts/berlin*
+F: arch/arm64/boot/dts/marvell/berlin*
+
ARM/TANGO ARCHITECTURE
M: Marc Gonzalez <marc.w.gonzalez@free.fr>
M: Mans Rullgard <mans@mansr.com>
@@ -11416,12 +11438,6 @@ F: include/sound/pxa2xx-lib.h
F: sound/arm/pxa*
F: sound/soc/pxa/
-PXA3xx NAND FLASH DRIVER
-M: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-L: linux-mtd@lists.infradead.org
-S: Maintained
-F: drivers/mtd/nand/pxa3xx_nand.c
-
QAT DRIVER
M: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
L: qat-linux@intel.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..1878083771af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -709,8 +709,6 @@ config ARCH_VIRT
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
-source "arch/arm/mach-mvebu/Kconfig"
-
source "arch/arm/mach-actions/Kconfig"
source "arch/arm/mach-alpine/Kconfig"
@@ -719,6 +717,8 @@ source "arch/arm/mach-artpec/Kconfig"
source "arch/arm/mach-asm9260/Kconfig"
+source "arch/arm/mach-aspeed/Kconfig"
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-axxia/Kconfig"
@@ -739,6 +739,9 @@ source "arch/arm/mach-dove/Kconfig"
source "arch/arm/mach-ep93xx/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
+
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
@@ -747,31 +750,33 @@ source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-hisi/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
+source "arch/arm/mach-iop13xx/Kconfig"
+
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-iop33x/Kconfig"
-source "arch/arm/mach-iop13xx/Kconfig"
-
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-mediatek/Kconfig"
+
source "arch/arm/mach-meson/Kconfig"
-source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
-source "arch/arm/mach-aspeed/Kconfig"
+source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
-
-source "arch/arm/mach-mediatek/Kconfig"
+source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
@@ -779,6 +784,8 @@ source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/mach-npcm/Kconfig"
+
source "arch/arm/mach-nspire/Kconfig"
source "arch/arm/plat-omap/Kconfig"
@@ -789,23 +796,31 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-oxnas/Kconfig"
+
source "arch/arm/mach-picoxcell/Kconfig"
+source "arch/arm/mach-prima2/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
-source "arch/arm/mach-mmp/Kconfig"
-
-source "arch/arm/mach-oxnas/Kconfig"
-
source "arch/arm/mach-qcom/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
+source "arch/arm/mach-s3c24xx/Kconfig"
+
+source "arch/arm/mach-s3c64xx/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-shmobile/Kconfig"
+
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-spear/Kconfig"
@@ -814,21 +829,8 @@ source "arch/arm/mach-sti/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
-source "arch/arm/mach-shmobile/Kconfig"
-
source "arch/arm/mach-sunxi/Kconfig"
-source "arch/arm/mach-prima2/Kconfig"
-
source "arch/arm/mach-tango/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e83f5161fdd8..e4e537f27339 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,6 +196,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OXNAS) += oxnas
machine-$(CONFIG_ARCH_OMAP1) += omap1
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 55c75b67351c..982d1a62661d 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -117,15 +117,15 @@
status = "disabled";
};
- nand0: nand@43100000 {
- compatible = "marvell,pxa3xx-nand";
+ nand_controller: nand-controller@43100000 {
+ compatible = "marvell,pxa3xx-nand-controller";
reg = <0x43100000 90>;
interrupts = <45>;
clocks = <&clks CLK_NAND>;
dmas = <&pdma 97 3>;
dma-names = "data";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 43dab4890ad3..8682b15336b9 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -49,6 +49,9 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_DEVTMPFS=y
@@ -74,6 +77,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
CONFIG_TTY_PRINTK=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index c0418e03d180..5e349c625b71 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -49,7 +49,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 026154c1d55a..c302a04e8cbc 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -126,9 +126,10 @@ CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
+CONFIG_SYSCON_REBOOT_MODE=m
CONFIG_BATTERY_LEGO_EV3=m
CONFIG_WATCHDOG=y
-CONFIG_DAVINCI_WATCHDOG=m
+CONFIG_DAVINCI_WATCHDOG=y
CONFIG_MFD_DM355EVM_MSP=y
CONFIG_TPS6507X=y
CONFIG_REGULATOR=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index ca0f13cafe38..054591dc9a00 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,7 +1,6 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
@@ -78,7 +77,6 @@ CONFIG_SMC91X=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_IMX=y
@@ -105,8 +103,8 @@ CONFIG_HWMON=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
-CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MX25_TSADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
@@ -116,10 +114,8 @@ CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_MX2=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
-CONFIG_SOC_CAMERA_OV2640=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_LCD_L4F00242T03=y
@@ -134,8 +130,9 @@ CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_MX27VIS_AIC32X4=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_SGTL5000=y
CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 4cb9829fccd1..3a308437b088 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -48,9 +48,7 @@ CONFIG_PCI_IMX6=y
CONFIG_SMP=y
CONFIG_ARM_PSCI=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_CMA=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_KEXEC=y
@@ -60,6 +58,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPUFREQ_DT=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
@@ -81,7 +80,6 @@ CONFIG_CAN=y
CONFIG_CAN_FLEXCAN=y
CONFIG_BT=y
CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_LL=y
CONFIG_CFG80211=y
@@ -92,7 +90,6 @@ CONFIG_RFKILL_INPUT=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
-CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
@@ -170,9 +167,9 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
-CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
@@ -181,7 +178,6 @@ CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
-CONFIG_HID_MULTITOUCH=y
CONFIG_SERIO_SERPORT=m
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_IMX=y
@@ -189,7 +185,6 @@ CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
@@ -209,19 +204,19 @@ CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_74X164=y
CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_IMX=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_SUPPLY=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_IIO_HWMON=y
-CONFIG_THERMAL=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_CPU_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_WATCHDOG=y
+CONFIG_DA9062_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9062=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_STMPE=y
@@ -229,17 +224,18 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PFUZE100=y
+CONFIG_RC_CORE=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_RC_CORE=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_RC_DEVICES=y
-CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
@@ -250,7 +246,6 @@ CONFIG_VIDEO_CODA=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_OV5640=m
-CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
@@ -285,10 +280,13 @@ CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_WM8960=y
+CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SIMPLE_CARD=y
+CONFIG_HID_MULTITOUCH=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
@@ -354,6 +352,7 @@ CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
@@ -369,11 +368,14 @@ CONFIG_COMMON_CLK_PWM=y
CONFIG_IIO=y
CONFIG_IMX7D_ADC=y
CONFIG_VF610_ADC=y
+CONFIG_MAG3110=y
CONFIG_MPL3115=y
CONFIG_PWM=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IMX=y
CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
CONFIG_MUX_MMIO=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 28f1d714e5b9..e6b3c96d4c09 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -80,6 +80,7 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
@@ -174,6 +175,7 @@ CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_DEV=y
CONFIG_CAN_AT91=m
+CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_MCP251X=y
@@ -208,6 +210,7 @@ CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_DAVINCI=y
@@ -307,11 +310,15 @@ CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
@@ -351,6 +358,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
@@ -368,7 +377,7 @@ CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
-CONFIG_I2C_IMX=m
+CONFIG_I2C_IMX=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
@@ -438,9 +447,11 @@ CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_BATTERY_ACT8945A=y
+CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_CPCAP=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
@@ -462,7 +473,9 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
CONFIG_CPU_THERMAL=y
+CONFIG_BCM2835_THERMAL=m
CONFIG_BRCMSTB_THERMAL=m
+CONFIG_IMX_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
@@ -476,6 +489,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -508,9 +522,11 @@ CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_RK808=y
+CONFIG_MFD_CPCAP=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
@@ -527,6 +543,7 @@ CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
+CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_RK808=y
@@ -547,6 +564,7 @@ CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TI_ABB=y
@@ -617,6 +635,7 @@ CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_SUN4I=m
+CONFIG_DRM_FSL_DCU=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
@@ -624,6 +643,8 @@ CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_SII9234=m
CONFIG_DRM_STI=m
CONFIG_DRM_VC4=y
+CONFIG_DRM_ETNAVIV=m
+CONFIG_DRM_MXSFB=m
CONFIG_FB_ARMCLCD=y
CONFIG_FB_EFI=y
CONFIG_FB_WM8505=y
@@ -674,6 +695,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=m
CONFIG_SND_SOC_TEGRA_WM9712=m
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
+CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_SGTL5000=m
@@ -683,6 +705,7 @@ CONFIG_SND_SOC_STI=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_USB=y
+CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=m
@@ -704,6 +727,15 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=m
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
+CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_UX500=m
+CONFIG_USB_UX500_DMA=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_TUSB_OMAP_DMA=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y
@@ -712,6 +744,9 @@ CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_AM335X_PHY_USB=m
+CONFIG_TWL6030_USB=m
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MSM_OTG=m
@@ -719,6 +754,25 @@ CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
@@ -755,6 +809,7 @@ CONFIG_MMC_SDHCI_OMAP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
+CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_MAX77693=m
@@ -805,6 +860,7 @@ CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_CPCAP=m
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_AT_HDMAC=y
@@ -877,6 +933,7 @@ CONFIG_IIO_SW_TRIGGER=y
CONFIG_AT91_ADC=m
CONFIG_AT91_SAMA5D2_ADC=m
CONFIG_BERLIN2_ADC=m
+CONFIG_CPCAP_ADC=m
CONFIG_EXYNOS_ADC=m
CONFIG_VF610_ADC=m
CONFIG_XILINX_XADC=y
@@ -902,9 +959,12 @@ CONFIG_E1000E=y
CONFIG_PWM_STI=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BRCMSTB=m
+CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_ROCKCHIP_DP=m
CONFIG_PHY_ROCKCHIP_USB=y
@@ -918,7 +978,9 @@ CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_BCM2835_MBOX=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EFI_VARS=m
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index bbfb6759447b..a508eb302e7a 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,5 +1,4 @@
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
@@ -62,14 +61,13 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_ENC28J60=y
-CONFIG_SMSC_PHY=y
CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -77,9 +75,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_SERIO is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
@@ -138,11 +134,10 @@ CONFIG_RTC_DRV_STMP=y
CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
CONFIG_IIO=y
-CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_MXS_LRADC_ADC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_PWM=y
CONFIG_PWM_MXS=y
-CONFIG_NVMEM=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
@@ -172,8 +167,7 @@ CONFIG_FRAME_WARN=2048
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_TIMER_STATS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_PROVE_LOCKING=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index bce7e5abcc05..6491419b1dad 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -50,7 +50,6 @@ CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_DRA7XX=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
@@ -71,9 +70,10 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPUFREQ_DT=m
-CONFIG_ARM_TI_CPUFREQ=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_ARM_TI_CPUFREQ=y
CONFIG_CPU_IDLE=y
+CONFIG_KERNEL_MODE_NEON=y
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
@@ -103,9 +103,11 @@ CONFIG_BT_HIDP=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -232,7 +234,9 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PALMAS_PWRBUTTON=m
+CONFIG_INPUT_PWM_VIBRA=m
CONFIG_SERIO=m
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
@@ -244,9 +248,11 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
@@ -291,6 +297,7 @@ CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_MFD_CPCAP=y
CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
@@ -314,40 +321,47 @@ CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_RC_CORE=m
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_LIRC=y
CONFIG_RC_DEVICES=y
+CONFIG_IR_SPI=m
CONFIG_IR_RX51=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_IR_PWM_TX=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CEC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_OMAP3=m
+CONFIG_CEC_PLATFORM_DRIVERS=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_TVP5150=m
+CONFIG_DRM=m
+CONFIG_DRM_OMAP=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_DRM_OMAP_ENCODER_OPA362=m
+CONFIG_DRM_OMAP_ENCODER_TFP410=m
+CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
+CONFIG_DRM_OMAP_CONNECTOR_DVI=m
+CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
+CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
+CONFIG_DRM_OMAP_PANEL_DPI=m
+CONFIG_DRM_OMAP_PANEL_DSI_CM=m
+CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_TILCDC=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP2=m
-CONFIG_FB_OMAP5_DSS_HDMI=y
-CONFIG_FB_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2_ENCODER_TFP410=m
-CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
-CONFIG_FB_OMAP2_CONNECTOR_DVI=m
-CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
-CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
-CONFIG_FB_OMAP2_PANEL_DPI=m
-CONFIG_FB_OMAP2_PANEL_DSI_CM=m
-CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
-CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
-CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -356,11 +370,11 @@ CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m
+CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_VERBOSE_PRINTK=y
@@ -374,7 +388,9 @@ CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_HID_GENERIC=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
@@ -385,7 +401,6 @@ CONFIG_USB_MON=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_WDM=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=m
CONFIG_USB_MUSB_HDRC=m
@@ -462,10 +477,16 @@ CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
CONFIG_TI_EDMA=y
CONFIG_OMAP_IOMMU=y
-CONFIG_EXTCON=m
+CONFIG_REMOTEPROC=m
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_WKUP_M3_RPROC=m
+CONFIG_SOC_TI=y
+CONFIG_AMX3_PM=m
+CONFIG_WKUP_M3_IPC=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_TI_EMIF=m
+CONFIG_TI_EMIF_SRAM=m
CONFIG_IIO=m
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
@@ -480,6 +501,7 @@ CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_PHY_CPCAP_USB=m
+CONFIG_PHY_MAPPHONE_MDM6600=m
CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
@@ -494,7 +516,6 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
@@ -515,11 +536,18 @@ CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
@@ -528,13 +556,3 @@ CONFIG_LIBCRC32C=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
new file mode 100644
index 000000000000..f6ba32c9d173
--- /dev/null
+++ b/arch/arm/configs/oxnas_v6_defconfig
@@ -0,0 +1,93 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_OXNAS=y
+CONFIG_MACH_OX820=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_CMA=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_KEXEC=y
+CONFIG_EFI=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OXNAS=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_REALTEK_PHY=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_CONSOLE=y
+CONFIG_PSTORE_PMSG=y
+CONFIG_PSTORE_RAM=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index bfea6874b0a1..3e0de035ab77 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -32,8 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 837d0c9c8b0e..5655a1cee87d 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -197,7 +197,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_MARVELL=m
CONFIG_MTD_NAND_CM_X270=m
CONFIG_MTD_NAND_TMIO=m
CONFIG_MTD_NAND_BRCMNAND=m
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index 77a56c23c6ef..2dd56e9a484e 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -33,7 +33,7 @@ CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_ISL29003=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 2a6d69d896bd..cc9fa24d4b8f 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -11,19 +11,17 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_REALVIEW=y
-CONFIG_REALVIEW_DT=y
CONFIG_MACH_REALVIEW_EB=y
CONFIG_REALVIEW_EB_ARM1136=y
CONFIG_REALVIEW_EB_ARM1176=y
CONFIG_REALVIEW_EB_A9MP=y
CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_REALVIEW_EB_ARM11MP_REVB=y
CONFIG_MACH_REALVIEW_PB11MP=y
CONFIG_MACH_REALVIEW_PB1176=y
CONFIG_MACH_REALVIEW_PBA8=y
CONFIG_MACH_REALVIEW_PBX=y
CONFIG_SMP=y
-CONFIG_AEABI=y
+CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
@@ -46,7 +44,7 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
@@ -59,21 +57,21 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
CONFIG_I2C_VERSATILE=y
CONFIG_SPI=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PL111=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=y
CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_ARMAACI=y
CONFIG_USB=y
@@ -83,13 +81,14 @@ CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PL031=y
+CONFIG_AUXDISPLAY=y
+CONFIG_ARM_CHARLCD=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 578434cfd1a0..a701601fbd76 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -5,8 +5,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_ARCH_RENESAS=y
@@ -34,7 +32,6 @@ CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -104,9 +101,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=20
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_DEMUX_PINCTRL=y
@@ -120,6 +114,7 @@ CONFIG_SPI=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH_HSPI=y
+CONFIG_PINCTRL_RZA1=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_PCF857X=y
@@ -166,7 +161,6 @@ CONFIG_FB_SH_MOBILE_MERAM=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
@@ -227,4 +221,5 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index bb358ffde7d2..ba805b757a8d 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -57,6 +57,8 @@ CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
@@ -71,6 +73,7 @@ CONFIG_STM32_MDMA=y
CONFIG_IIO=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
+CONFIG_EXT3_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 295408ea9dc7..df68dc4056e5 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -12,6 +12,7 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
+CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
@@ -32,7 +33,9 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
@@ -47,21 +50,22 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_VERSATILE=y
CONFIG_SPI=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_ARM_VERSATILE=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PL111=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
CONFIG_SND_ARMAACI=m
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
index 60bf3c23200d..74b56769f9cb 100644
--- a/arch/arm/include/debug/exynos.S
+++ b/arch/arm/include/debug/exynos.S
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
/* pull in the relevant register and map files. */
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index f4eeed2a1981..69201d7fb48f 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -1,13 +1,9 @@
-/* arch/arm/plat-samsung/include/plat/debug-macro.S
- *
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
* Copyright 2005, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
#include <linux/serial_s3c.h>
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6d870421a7a6..1254bf9d91b4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,5 @@
menuconfig ARCH_AT91
- bool "Atmel SoCs"
+ bool "AT91/Microchip SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
select COMMON_CLK_AT91
@@ -13,7 +13,7 @@ config SOC_SAMV7
select COMMON_CLK_AT91
select PINCTRL_AT91
help
- Select this if you are using an SoC from Atmel's SAME7, SAMS7 or SAMV7
+ Select this if you are using an SoC from Microchip's SAME7, SAMS7 or SAMV7
families.
config SOC_SAMA5D2
@@ -29,7 +29,7 @@ config SOC_SAMA5D2
select HAVE_AT91_AUDIO_PLL
select PINCTRL_AT91PIO4
help
- Select this if ou are using one of Atmel's SAMA5D2 family SoC.
+ Select this if ou are using one of Microchip's SAMA5D2 family SoC.
config SOC_SAMA5D3
bool "SAMA5D3 family"
@@ -41,7 +41,7 @@ config SOC_SAMA5D3
select HAVE_AT91_USB_CLK
select PINCTRL_AT91
help
- Select this if you are using one of Atmel's SAMA5D3 family SoC.
+ Select this if you are using one of Microchip's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
config SOC_SAMA5D4
@@ -56,7 +56,7 @@ config SOC_SAMA5D4
select HAVE_AT91_H32MX
select PINCTRL_AT91
help
- Select this if you are using one of Atmel's SAMA5D4 family SoC.
+ Select this if you are using one of Microchip's SAMA5D4 family SoC.
config SOC_AT91RM9200
bool "AT91RM9200"
@@ -70,7 +70,7 @@ config SOC_AT91RM9200
select SOC_SAM_V4_V5
select SRAM if PM
help
- Select this if you are using Atmel's AT91RM9200 SoC.
+ Select this if you are using Microchip's AT91RM9200 SoC.
config SOC_AT91SAM9
bool "AT91SAM9"
@@ -88,7 +88,7 @@ config SOC_AT91SAM9
select SOC_SAM_V4_V5
select SRAM if PM
help
- Select this if you are using one of those Atmel SoC:
+ Select this if you are using one of those Microchip SoC:
AT91SAM9260
AT91SAM9261
AT91SAM9263
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index f673cd7a6766..004f9c8de032 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -239,20 +239,6 @@ static inline void da830_evm_init_mmc(void)
}
}
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
- DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
- DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
- DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
- DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
- DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
- DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
- DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
- -1
-};
-
#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI)
#ifdef CONFIG_DA830_UI_NAND
@@ -357,6 +343,20 @@ static struct platform_device da830_evm_nand_device = {
.resource = da830_evm_nand_resources,
};
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+ DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+ DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+ DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+ DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+ DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+ DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+ DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+ -1
+};
+
static inline void da830_evm_init_nand(int mux_mode)
{
int ret;
@@ -551,10 +551,6 @@ static __init void da830_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da830_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -638,9 +634,8 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
- .init_time = davinci_timer_init,
+ .init_time = da830_init_time,
.init_machine = da830_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d898a94f6eae..3063478bcc36 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1334,10 +1334,6 @@ static __init void da850_evm_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -1481,10 +1477,9 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
- .init_time = davinci_timer_init,
+ .init_time = da850_init_time,
.init_machine = da850_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = da8xx_restart,
.reserve = da8xx_rproc_reserve_cma,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6b11907380c..cb30637d9eaf 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -427,9 +427,8 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm355_init_time,
.init_machine = dm355_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index fad9a5611a5d..59743bd76793 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -271,9 +271,8 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
.atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm355_init_time,
.init_machine = dm355_leopard_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e3780986d2a3..0ac085b58a2b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -774,10 +774,9 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
.atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm365_init_time,
.init_machine = dm365_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 85e6fb33b1ee..95b55aae1366 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -828,9 +828,8 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
.atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm644x_init_time,
.init_machine = davinci_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index cb0a41e83582..2d37f5b0e1f5 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -44,10 +44,8 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/serial.h>
-#include <mach/clock.h>
#include "davinci.h"
-#include "clock.h"
#define NAND_BLOCK_SIZE SZ_128K
@@ -716,14 +714,23 @@ static void __init evm_init_i2c(void)
}
#endif
+#define DM646X_REF_FREQ 27000000
+#define DM646X_AUX_FREQ 24000000
#define DM6467T_EVM_REF_FREQ 33000000
static void __init davinci_map_io(void)
{
dm646x_init();
+}
- if (machine_is_davinci_dm6467tevm())
- davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
+static void __init dm646x_evm_init_time(void)
+{
+ dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
+}
+
+static void __init dm6467t_evm_init_time(void)
+{
+ dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
}
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
@@ -797,21 +804,19 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm646x_evm_init_time,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm6467t_evm_init_time,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b73ce7bae81f..d1c85484c2e2 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -502,10 +502,6 @@ static void __init mityomapl138_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
@@ -570,9 +566,8 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
- .init_time = davinci_timer_init,
+ .init_time = da850_init_time,
.init_machine = mityomapl138_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4da210a1a110..f2875770fbff 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -227,9 +227,8 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
.atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm644x_init_time,
.init_machine = davinci_ntosd2_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 62eb7d668890..0d32042b728f 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -281,10 +281,6 @@ static __init void omapl138_hawk_init(void)
{
int ret;
- ret = da8xx_register_cfgchip();
- if (ret)
- pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -334,10 +330,9 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
- .init_time = davinci_timer_init,
+ .init_time = da850_init_time,
.init_machine = omapl138_hawk_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = da8xx_restart,
.reserve = da8xx_rproc_reserve_cma,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index d85accf7f760..2922da9d1684 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -150,9 +150,8 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
.atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
- .init_time = davinci_timer_init,
+ .init_time = dm644x_init_time,
.init_machine = davinci_sffsdr_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
- .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index fa2b83752e03..d7894d5aaa25 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -135,9 +135,6 @@ int davinci_clk_reset(struct clk *clk, bool reset);
void davinci_clk_enable(struct clk *clk);
void davinci_clk_disable(struct clk *clk);
-extern struct platform_device davinci_wdt_device;
-extern void davinci_watchdog_reset(struct platform_device *);
-
#endif
#endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 57ab18cf2a89..350d7673aa4d 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1200,7 +1200,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
- .cpu_clks = da830_clks,
.psc_bases = da830_psc_bases,
.psc_bases_num = ARRAY_SIZE(da830_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
@@ -1220,6 +1219,10 @@ void __init da830_init(void)
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+}
- davinci_clk_init(davinci_soc_info_da830.cpu_clks);
+void __init da830_init_time(void)
+{
+ davinci_clk_init(da830_clks);
+ davinci_timer_init();
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index aa37cbdf7d4d..34117e614e08 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1353,7 +1353,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
- .cpu_clks = da850_clks,
.psc_bases = da850_psc_bases,
.psc_bases_num = ARRAY_SIZE(da850_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
@@ -1392,6 +1391,10 @@ void __init da850_init(void)
v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+}
- davinci_clk_init(davinci_soc_info_da850.cpu_clks);
+void __init da850_init_time(void)
+{
+ davinci_clk_init(da850_clks);
+ davinci_timer_init();
}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index f06db6700ab2..ab199f4b9ce4 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -96,11 +96,10 @@ static const char *const da850_boards_compat[] __initconst = {
DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
.map_io = da850_init,
- .init_time = davinci_timer_init,
+ .init_time = da850_init_time,
.init_machine = da850_init_machine,
.dt_compat = da850_boards_compat,
.init_late = davinci_init_late,
- .restart = da8xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index c62b90c6118a..270cef85750a 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -83,6 +83,7 @@ int davinci_init_wdt(void);
/* DM355 function declarations */
void dm355_init(void);
+void dm355_init_time(void);
void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
void dm355_init_asp1(u32 evt_enable);
@@ -91,6 +92,7 @@ int dm355_gpio_register(void);
/* DM365 function declarations */
void dm365_init(void);
+void dm365_init_time(void);
void dm365_init_asp(void);
void dm365_init_vc(void);
void dm365_init_ks(struct davinci_ks_platform_data *pdata);
@@ -102,12 +104,14 @@ int dm365_gpio_register(void);
/* DM644x function declarations */
void dm644x_init(void);
+void dm644x_init_time(void);
void dm644x_init_asp(void);
int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
+void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
void dm646x_init_mcasp0(struct snd_platform_data *pdata);
void dm646x_init_mcasp1(struct snd_platform_data *pdata);
int dm646x_init_edma(struct edma_rsv_info *rsv);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index e1c40e73d30a..78390c64e6ca 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -11,7 +11,6 @@
* (at your option) any later version.
*/
#include <linux/init.h>
-#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
#include <linux/dma-contiguous.h>
#include <linux/serial_8250.h>
@@ -371,19 +370,6 @@ static struct platform_device da8xx_wdt_device = {
.resource = da8xx_watchdog_resources,
};
-void da8xx_restart(enum reboot_mode mode, const char *cmd)
-{
- struct device *dev;
-
- dev = bus_find_device_by_name(&platform_bus_type, NULL, "davinci-wdt");
- if (!dev) {
- pr_err("%s: failed to find watchdog device\n", __func__);
- return;
- }
-
- davinci_watchdog_reset(to_platform_device(dev));
-}
-
int __init da8xx_register_watchdog(void)
{
return platform_device_register(&da8xx_wdt_device);
@@ -1118,29 +1104,30 @@ int __init da850_register_sata(unsigned long refclkpn)
}
#endif
-static struct syscon_platform_data da8xx_cfgchip_platform_data = {
- .label = "cfgchip",
-};
-
-static struct resource da8xx_cfgchip_resources[] = {
- {
- .start = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
- .end = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
- .flags = IORESOURCE_MEM,
- },
-};
+static struct regmap *da8xx_cfgchip;
-static struct platform_device da8xx_cfgchip_device = {
- .name = "syscon",
- .id = -1,
- .dev = {
- .platform_data = &da8xx_cfgchip_platform_data,
- },
- .num_resources = ARRAY_SIZE(da8xx_cfgchip_resources),
- .resource = da8xx_cfgchip_resources,
+static const struct regmap_config da8xx_cfgchip_config __initconst = {
+ .name = "cfgchip",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
};
-int __init da8xx_register_cfgchip(void)
+/**
+ * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
+ *
+ * This is for use on non-DT boards only. For DT boards, use
+ * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
+ *
+ * Returns: Pointer to the CFGCHIP regmap or negative error code.
+ */
+struct regmap * __init da8xx_get_cfgchip(void)
{
- return platform_device_register(&da8xx_cfgchip_device);
+ if (IS_ERR_OR_NULL(da8xx_cfgchip))
+ da8xx_cfgchip = regmap_init_mmio(NULL,
+ DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
+ &da8xx_cfgchip_config);
+
+ return da8xx_cfgchip;
}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 3ae70f2909b0..0edda4093e47 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -282,18 +282,13 @@ static struct resource wdt_resources[] = {
},
};
-struct platform_device davinci_wdt_device = {
+static struct platform_device davinci_wdt_device = {
.name = "davinci-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
-void davinci_restart(enum reboot_mode mode, const char *cmd)
-{
- davinci_watchdog_reset(&davinci_wdt_device);
-}
-
int davinci_init_wdt(void)
{
return platform_device_register(&davinci_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 938747f20c22..f29480495c18 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1012,7 +1012,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.jtag_id_reg = 0x01c40028,
.ids = dm355_ids,
.ids_num = ARRAY_SIZE(dm355_ids),
- .cpu_clks = dm355_clks,
.psc_bases = dm355_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
@@ -1043,7 +1042,12 @@ void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
davinci_map_sysmod();
- davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
+}
+
+void __init dm355_init_time(void)
+{
+ davinci_clk_init(dm355_clks);
+ davinci_timer_init();
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 5d9f96df08e9..1e3df9df1e10 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1116,7 +1116,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
.jtag_id_reg = 0x01c40028,
.ids = dm365_ids,
.ids_num = ARRAY_SIZE(dm365_ids),
- .cpu_clks = dm365_clks,
.psc_bases = dm365_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm365_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
@@ -1168,7 +1167,12 @@ void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
davinci_map_sysmod();
- davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
+}
+
+void __init dm365_init_time(void)
+{
+ davinci_clk_init(dm365_clks);
+ davinci_timer_init();
}
static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 6b41e1ca511e..b409801649e1 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -905,7 +905,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = {
.jtag_id_reg = 0x01c40028,
.ids = dm644x_ids,
.ids_num = ARRAY_SIZE(dm644x_ids),
- .cpu_clks = dm644x_clks,
.psc_bases = dm644x_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
@@ -931,7 +930,12 @@ void __init dm644x_init(void)
{
davinci_common_init(&davinci_soc_info_dm644x);
davinci_map_sysmod();
- davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
+}
+
+void __init dm644x_init_time(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_timer_init();
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 6fc06a6ad4f8..109ab1fa0d2c 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -39,12 +39,6 @@
#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
BIT_MASK(8))
-/*
- * Device specific clocks
- */
-#define DM646X_REF_FREQ 27000000
-#define DM646X_AUX_FREQ 24000000
-
#define DM646X_EMAC_BASE 0x01c80000
#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
#define DM646X_EMAC_CNTRL_OFFSET 0x0000
@@ -64,13 +58,12 @@ static struct pll_data pll2_data = {
static struct clk ref_clk = {
.name = "ref_clk",
- .rate = DM646X_REF_FREQ,
- .set_rate = davinci_simple_set_rate,
+ /* rate is initialized in dm646x_init_time() */
};
static struct clk aux_clkin = {
.name = "aux_clkin",
- .rate = DM646X_AUX_FREQ,
+ /* rate is initialized in dm646x_init_time() */
};
static struct clk pll1_clk = {
@@ -888,7 +881,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
.jtag_id_reg = 0x01c40028,
.ids = dm646x_ids,
.ids_num = ARRAY_SIZE(dm646x_ids),
- .cpu_clks = dm646x_clks,
.psc_bases = dm646x_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
@@ -956,7 +948,15 @@ void __init dm646x_init(void)
{
davinci_common_init(&davinci_soc_info_dm646x);
davinci_map_sysmod();
- davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
+}
+
+void __init dm646x_init_time(unsigned long ref_clk_rate,
+ unsigned long aux_clkin_rate)
+{
+ ref_clk.rate = ref_clk_rate;
+ aux_clkin.rate = aux_clkin_rate;
+ davinci_clk_init(dm646x_clks);
+ davinci_timer_init();
}
static int __init dm646x_init_devices(void)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 433a008ff796..f0d5e858f158 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -53,7 +53,6 @@ struct davinci_soc_info {
u32 jtag_id_reg;
struct davinci_id *ids;
unsigned long ids_num;
- struct clk_lookup *cpu_clks;
u32 *psc_bases;
unsigned long psc_bases_num;
u32 pinmux_base;
@@ -81,7 +80,6 @@ extern struct davinci_soc_info davinci_soc_info;
extern void davinci_common_init(const struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
-void davinci_restart(enum reboot_mode mode, const char *cmd);
void davinci_init_late(void);
#ifdef CONFIG_DAVINCI_RESET_CLOCKS
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 93ff1569cee5..9fd6d0125762 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -18,6 +18,7 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/davinci_asp.h>
#include <linux/reboot.h>
+#include <linux/regmap.h>
#include <linux/videodev2.h>
#include <mach/serial.h>
@@ -87,7 +88,10 @@ extern unsigned int da850_max_speed;
#define DA8XX_ARM_RAM_BASE 0xffff0000
void da830_init(void);
+void da830_init_time(void);
+
void da850_init(void);
+void da850_init_time(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
@@ -118,12 +122,11 @@ int da850_register_vpif_display
(struct vpif_display_config *display_config);
int da850_register_vpif_capture
(struct vpif_capture_config *capture_config);
-void da8xx_restart(enum reboot_mode mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
int da850_register_gpio(void);
int da830_register_gpio(void);
-int da8xx_register_cfgchip(void);
+struct regmap *da8xx_get_cfgchip(void);
extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 034f865fe78e..1bb991ad9c1e 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -80,13 +80,6 @@ enum {
#define TGCR_UNRESET 0x1
#define TGCR_RESET_MASK 0x3
-#define WDTCR_WDEN_SHIFT 14
-#define WDTCR_WDEN_DISABLE 0x0
-#define WDTCR_WDEN_ENABLE 0x1
-#define WDTCR_WDKEY_SHIFT 16
-#define WDTCR_WDKEY_SEQ0 0xa5c6
-#define WDTCR_WDKEY_SEQ1 0xda7e
-
struct timer_s {
char *name;
unsigned int id;
@@ -409,53 +402,3 @@ void __init davinci_timer_init(void)
for (i=0; i< ARRAY_SIZE(timers); i++)
timer32_config(&timers[i]);
}
-
-/* reset board using watchdog timer */
-void davinci_watchdog_reset(struct platform_device *pdev)
-{
- u32 tgcr, wdtcr;
- void __iomem *base;
- struct clk *wd_clk;
-
- base = ioremap(pdev->resource[0].start, SZ_4K);
- if (WARN_ON(!base))
- return;
-
- wd_clk = clk_get(&pdev->dev, NULL);
- if (WARN_ON(IS_ERR(wd_clk)))
- return;
- clk_prepare_enable(wd_clk);
-
- /* disable, internal clock source */
- __raw_writel(0, base + TCR);
-
- /* reset timer, set mode to 64-bit watchdog, and unreset */
- tgcr = 0;
- __raw_writel(tgcr, base + TGCR);
- tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
- tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
- (TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- __raw_writel(tgcr, base + TGCR);
-
- /* clear counter and period regs */
- __raw_writel(0, base + TIM12);
- __raw_writel(0, base + TIM34);
- __raw_writel(0, base + PRD12);
- __raw_writel(0, base + PRD34);
-
- /* put watchdog in pre-active state */
- wdtcr = __raw_readl(base + WDTCR);
- wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
- (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- __raw_writel(wdtcr, base + WDTCR);
-
- /* put watchdog in active state */
- wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
- (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- __raw_writel(wdtcr, base + WDTCR);
-
- /* write an invalid value to the WDKEY field to trigger
- * a watchdog reset */
- wdtcr = 0x00004000;
- __raw_writel(wdtcr, base + WDTCR);
-}
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index d480a02e1298..50445f0e98de 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
@@ -25,6 +26,8 @@
static struct clk *usb20_clk;
+static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
+
static struct platform_device da8xx_usb_phy = {
.name = "da8xx-usb-phy",
.id = -1,
@@ -35,11 +38,14 @@ static struct platform_device da8xx_usb_phy = {
* registered yet.
*/
.init_name = "da8xx-usb-phy",
+ .platform_data = &da8xx_usb_phy_pdata,
},
};
int __init da8xx_register_usb_phy(void)
{
+ da8xx_usb_phy_pdata.cfgchip = da8xx_get_cfgchip();
+
return platform_device_register(&da8xx_usb_phy);
}
@@ -256,14 +262,14 @@ static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
}
static struct clk usb20_phy_clk = {
- .name = "usb20_phy",
+ .name = "usb0_clk48",
.clk_enable = usb20_phy_clk_enable,
.clk_disable = usb20_phy_clk_disable,
.set_parent = usb20_phy_clk_set_parent,
};
static struct clk_lookup usb20_phy_clk_lookup =
- CLK("da8xx-usb-phy", "usb20_phy", &usb20_phy_clk);
+ CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk);
/**
* da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
@@ -320,18 +326,18 @@ static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
}
static struct clk usb11_phy_clk = {
- .name = "usb11_phy",
+ .name = "usb1_clk48",
.set_parent = usb11_phy_clk_set_parent,
};
static struct clk_lookup usb11_phy_clk_lookup =
- CLK("da8xx-usb-phy", "usb11_phy", &usb11_phy_clk);
+ CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk);
/**
* da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
*
* @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
- * or "usb20_phy" if false.
+ * or "usb0_clk48" if false.
*/
int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
{
@@ -341,7 +347,7 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
if (use_usb_refclkin)
parent = clk_get(NULL, "usb_refclkin");
else
- parent = clk_get(&da8xx_usb_phy.dev, "usb20_phy");
+ parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48");
if (IS_ERR(parent))
return PTR_ERR(parent);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index fbd108ce8745..8c4f5e342dc1 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -192,7 +192,8 @@ static void __init exynos_dt_machine_init(void)
#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
(of_machine_is_compatible("samsung,exynos4412") &&
- of_machine_is_compatible("samsung,trats2")) ||
+ (of_machine_is_compatible("samsung,trats2") ||
+ of_machine_is_compatible("samsung,midas"))) ||
of_machine_is_compatible("samsung,exynos3250") ||
of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index dc4346ecf16d..a822c5073715 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -163,7 +163,7 @@ void exynos_enter_aftr(void)
exynos_pm_central_suspend();
- if (of_machine_is_compatible("samsung,exynos4412")) {
+ if (soc_is_exynos4412()) {
/* Setting SEQ_OPTION register */
pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
S5P_CENTRAL_SEQ_OPTION);
@@ -271,11 +271,7 @@ abort:
goto fail;
call_firmware_op(cpu_boot, 1);
-
- if (soc_is_exynos3250())
- dsb_sev();
- else
- arch_send_wakeup_ipi_mask(cpumask_of(1));
+ dsb_sev();
}
}
fail:
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 782699e67600..e47fa13f4b0c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -32,18 +32,6 @@ config MXC_DEBUG_BOARD
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
-config HAVE_EPIT
- bool
-
-config MXC_USE_EPIT
- bool "Use EPIT instead of GPT"
- depends on HAVE_EPIT
- help
- Use EPIT as the system timer on systems that have it. Normally you
- don't have a reason to do so as the EPIT has the same features and
- uses the same clocks as the GPT. Anyway, on some systems the GPT
- may be in use for other purposes.
-
config HAVE_IMX_ANATOP
bool
@@ -85,7 +73,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select HAVE_EPIT
select MXC_AVIC
select PINCTRL_IMX35
@@ -482,7 +469,7 @@ config SOC_IMX53
config SOC_IMX6
bool
- select ARM_CPU_SUSPEND if PM
+ select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
@@ -512,6 +499,13 @@ config SOC_IMX6SL
help
This enables support for Freescale i.MX6 SoloLite processor.
+config SOC_IMX6SLL
+ bool "i.MX6 SoloLiteLite support"
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloLiteLite processor.
+
config SOC_IMX6SX
bool "i.MX6 SoloX support"
select PINCTRL_IMX6SX
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8ff71058207d..2327e3e876d8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -20,13 +20,13 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
endif
@@ -78,6 +78,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
endif
obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 649a84c251ad..61f3d94f1633 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -116,6 +117,7 @@ void __init imx_init_revision_from_anatop(void)
unsigned int revision;
u32 digprog;
u16 offset = ANADIG_DIGPROG;
+ u8 major_part, minor_part;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
anatop_base = of_iomap(np, 0);
@@ -127,45 +129,25 @@ void __init imx_init_revision_from_anatop(void)
digprog = readl_relaxed(anatop_base + offset);
iounmap(anatop_base);
- switch (digprog & 0xff) {
- case 0:
- /*
- * For i.MX6QP, most of the code for i.MX6Q can be resued,
- * so internally, we identify it as i.MX6Q Rev 2.0
- */
- if (digprog >> 8 & 0x01)
- revision = IMX_CHIP_REVISION_2_0;
- else
- revision = IMX_CHIP_REVISION_1_0;
- break;
- case 1:
- revision = IMX_CHIP_REVISION_1_1;
- break;
- case 2:
- revision = IMX_CHIP_REVISION_1_2;
- break;
- case 3:
- revision = IMX_CHIP_REVISION_1_3;
- break;
- case 4:
- revision = IMX_CHIP_REVISION_1_4;
- break;
- case 5:
- /*
- * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked
- * as 'D' in Part Number last character.
- */
- revision = IMX_CHIP_REVISION_1_5;
- break;
- default:
+ /*
+ * On i.MX7D digprog value match linux version format, so
+ * it needn't map again and we can use register value directly.
+ */
+ if (of_device_is_compatible(np, "fsl,imx7d-anatop")) {
+ revision = digprog & 0xff;
+ } else {
/*
- * Fail back to return raw register value instead of 0xff.
- * It will be easy to know version information in SOC if it
- * can't be recognized by known version. And some chip's (i.MX7D)
- * digprog value match linux version format, so it needn't map
- * again and we can use register value directly.
+ * MAJOR: [15:8], the major silicon revison;
+ * MINOR: [7: 0], the minor silicon revison;
+ *
+ * please refer to the i.MX RM for the detailed
+ * silicon revison bit define.
+ * format the major part and minor part to match the
+ * linux kernel soc version format.
*/
- revision = digprog & 0xff;
+ major_part = (digprog >> 8) & 0xf;
+ minor_part = digprog & 0xf;
+ revision = ((major_part + 1) << 4) | minor_part;
}
mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 1afccae0420c..c0434a36687a 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -22,6 +22,7 @@
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -51,7 +52,12 @@
#define AVIC_NUM_IRQS 64
+/* low power interrupt mask registers */
+#define MX25_CCM_LPIMR0 0x68
+#define MX25_CCM_LPIMR1 0x6C
+
static void __iomem *avic_base;
+static void __iomem *mx25_ccm_base;
static struct irq_domain *domain;
#ifdef CONFIG_FIQ
@@ -93,6 +99,18 @@ static void avic_irq_suspend(struct irq_data *d)
avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask);
imx_writel(gc->wake_active, avic_base + ct->regs.mask);
+
+ if (mx25_ccm_base) {
+ u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ?
+ MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1;
+ /*
+ * The interrupts which are still enabled will be used as wakeup
+ * sources. Allow those interrupts in low-power mode.
+ * The LPIMR registers use 0 to allow an interrupt, the AVIC
+ * registers use 1.
+ */
+ imx_writel(~gc->wake_active, mx25_ccm_base + offs);
+ }
}
static void avic_irq_resume(struct irq_data *d)
@@ -102,6 +120,13 @@ static void avic_irq_resume(struct irq_data *d)
int idx = d->hwirq >> 5;
imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+
+ if (mx25_ccm_base) {
+ u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ?
+ MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1;
+
+ imx_writel(0xffffffff, mx25_ccm_base + offs);
+ }
}
#else
@@ -158,6 +183,18 @@ void __init mxc_init_irq(void __iomem *irqbase)
avic_base = irqbase;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ mx25_ccm_base = of_iomap(np, 0);
+
+ if (mx25_ccm_base) {
+ /*
+ * By default, we mask all interrupts. We set the actual mask
+ * before we go into low-power mode.
+ */
+ imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR0);
+ imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR1);
+ }
+
/* put the AVIC into the reset value with
* all interrupts disabled
*/
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index d4e55f2a897e..32969f34486a 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -135,6 +135,9 @@ struct device * __init imx_soc_device_init(void)
case MXC_CPU_IMX6ULL:
soc_id = "i.MX6ULL";
break;
+ case MXC_CPU_IMX6SLL:
+ soc_id = "i.MX6SLL";
+ break;
case MXC_CPU_IMX7D:
soc_id = "i.MX7D";
break;
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
index 8d866fb674a8..fa8ead145d17 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -12,6 +12,7 @@
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
static int imx6sl_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
@@ -21,9 +22,11 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev,
* Software workaround for ERR005311, see function
* description for details.
*/
- imx6sl_set_wait_clk(true);
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(true);
cpu_do_idle();
- imx6sl_set_wait_clk(false);
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(false);
imx6_set_lpm(WAIT_CLOCKED);
return index;
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index c5a5c3a70ab1..d0f14b761ff7 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -89,6 +89,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
*/
.exit_latency = 300,
.target_residency = 500,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.enter = imx6sx_enter_wait,
.name = "LOW-POWER-IDLE",
.desc = "ARM power off",
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
deleted file mode 100644
index fb9a73a57d00..000000000000
--- a/arch/arm/mach-imx/epit.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * linux/arch/arm/plat-mxc/epit.c
- *
- * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#define EPITCR 0x00
-#define EPITSR 0x04
-#define EPITLR 0x08
-#define EPITCMPR 0x0c
-#define EPITCNR 0x10
-
-#define EPITCR_EN (1 << 0)
-#define EPITCR_ENMOD (1 << 1)
-#define EPITCR_OCIEN (1 << 2)
-#define EPITCR_RLD (1 << 3)
-#define EPITCR_PRESC(x) (((x) & 0xfff) << 4)
-#define EPITCR_SWR (1 << 16)
-#define EPITCR_IOVW (1 << 17)
-#define EPITCR_DBGEN (1 << 18)
-#define EPITCR_WAITEN (1 << 19)
-#define EPITCR_RES (1 << 20)
-#define EPITCR_STOPEN (1 << 21)
-#define EPITCR_OM_DISCON (0 << 22)
-#define EPITCR_OM_TOGGLE (1 << 22)
-#define EPITCR_OM_CLEAR (2 << 22)
-#define EPITCR_OM_SET (3 << 22)
-#define EPITCR_CLKSRC_OFF (0 << 24)
-#define EPITCR_CLKSRC_PERIPHERAL (1 << 24)
-#define EPITCR_CLKSRC_REF_HIGH (1 << 24)
-#define EPITCR_CLKSRC_REF_LOW (3 << 24)
-
-#define EPITSR_OCIF (1 << 0)
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "hardware.h"
-
-static struct clock_event_device clockevent_epit;
-
-static void __iomem *timer_base;
-
-static inline void epit_irq_disable(void)
-{
- u32 val;
-
- val = imx_readl(timer_base + EPITCR);
- val &= ~EPITCR_OCIEN;
- imx_writel(val, timer_base + EPITCR);
-}
-
-static inline void epit_irq_enable(void)
-{
- u32 val;
-
- val = imx_readl(timer_base + EPITCR);
- val |= EPITCR_OCIEN;
- imx_writel(val, timer_base + EPITCR);
-}
-
-static void epit_irq_acknowledge(void)
-{
- imx_writel(EPITSR_OCIF, timer_base + EPITSR);
-}
-
-static int __init epit_clocksource_init(struct clk *timer_clk)
-{
- unsigned int c = clk_get_rate(timer_clk);
-
- return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
- clocksource_mmio_readl_down);
-}
-
-/* clock event */
-
-static int epit_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = imx_readl(timer_base + EPITCNR);
-
- imx_writel(tcmp - evt, timer_base + EPITCMPR);
-
- return 0;
-}
-
-/* Left event sources disabled, no more interrupts appear */
-static int epit_shutdown(struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call epit_set_next_event()
- */
- local_irq_save(flags);
-
- /* Disable interrupt in GPT module */
- epit_irq_disable();
-
- /* Clear pending interrupt */
- epit_irq_acknowledge();
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int epit_set_oneshot(struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call epit_set_next_event()
- */
- local_irq_save(flags);
-
- /* Disable interrupt in GPT module */
- epit_irq_disable();
-
- /* Clear pending interrupt, only while switching mode */
- if (!clockevent_state_oneshot(evt))
- epit_irq_acknowledge();
-
- /*
- * Do not put overhead of interrupt enable/disable into
- * epit_set_next_event(), the core has about 4 minutes
- * to call epit_set_next_event() or shutdown clock after
- * mode switching
- */
- epit_irq_enable();
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_epit;
-
- epit_irq_acknowledge();
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction epit_timer_irq = {
- .name = "i.MX EPIT Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = epit_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_epit = {
- .name = "epit",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = epit_shutdown,
- .tick_resume = epit_shutdown,
- .set_state_oneshot = epit_set_oneshot,
- .set_next_event = epit_set_next_event,
- .rating = 200,
-};
-
-static int __init epit_clockevent_init(struct clk *timer_clk)
-{
- clockevent_epit.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clockevent_epit,
- clk_get_rate(timer_clk),
- 0x800, 0xfffffffe);
-
- return 0;
-}
-
-void __init epit_timer_init(void __iomem *base, int irq)
-{
- struct clk *timer_clk;
-
- timer_clk = clk_get_sys("imx-epit.0", NULL);
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX epit: unable to get clk\n");
- return;
- }
-
- clk_prepare_enable(timer_clk);
-
- timer_base = base;
-
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- imx_writel(0x0, timer_base + EPITCR);
-
- imx_writel(0xffffffff, timer_base + EPITLR);
- imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
- timer_base + EPITCR);
-
- /* init and register the timer to the framework */
- epit_clocksource_init(timer_clk);
- epit_clockevent_init(timer_clk);
-
- /* Make irqs happen */
- setup_irq(irq, &epit_timer_irq);
-}
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 04084900d810..c7a1ef180dda 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -18,6 +18,7 @@
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
static void __init imx6sl_fec_init(void)
{
@@ -54,7 +55,8 @@ static void __init imx6sl_init_machine(void)
of_platform_default_populate(NULL, NULL, parent);
- imx6sl_fec_init();
+ if (cpu_is_imx6sl())
+ imx6sl_fec_init();
imx_anatop_init();
imx6sl_pm_init();
}
@@ -66,11 +68,15 @@ static void __init imx6sl_init_irq(void)
imx_init_l2cache();
imx_src_init();
irqchip_init();
- imx6_pm_ccm_init("fsl,imx6sl-ccm");
+ if (cpu_is_imx6sl())
+ imx6_pm_ccm_init("fsl,imx6sl-ccm");
+ else
+ imx6_pm_ccm_init("fsl,imx6sll-ccm");
}
static const char * const imx6sl_dt_compat[] __initconst = {
"fsl,imx6sl",
+ "fsl,imx6sll",
NULL,
};
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index e00d6260c3df..026e2ca45f1e 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -40,6 +40,7 @@
#define MXC_CPU_IMX6Q 0x63
#define MXC_CPU_IMX6UL 0x64
#define MXC_CPU_IMX6ULL 0x65
+#define MXC_CPU_IMX6SLL 0x67
#define MXC_CPU_IMX7D 0x72
#define IMX_DDR_TYPE_LPDDR2 1
@@ -79,6 +80,11 @@ static inline bool cpu_is_imx6ull(void)
return __mxc_cpu_type == MXC_CPU_IMX6ULL;
}
+static inline bool cpu_is_imx6sll(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6SLL;
+}
+
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index ecdf071653d4..017539dd712b 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -428,10 +428,8 @@ static int __init imx6_pm_get_base(struct imx6_pm_base *base,
int ret = 0;
node = of_find_compatible_node(NULL, NULL, compat);
- if (!node) {
- ret = -ENODEV;
- goto out;
- }
+ if (!node)
+ return -ENODEV;
ret = of_address_to_resource(node, 0, &res);
if (ret)
@@ -444,7 +442,6 @@ static int __init imx6_pm_get_base(struct imx6_pm_base *base,
put_node:
of_node_put(node);
-out:
return ret;
}
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index d2283009a5ff..6c2ebf01893a 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -172,10 +172,8 @@ static struct mtd_partition aspenite_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data aspenite_nand_info = {
- .enable_arbiter = 1,
- .num_cs = 1,
- .parts[0] = aspenite_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
+ .parts = aspenite_nand_partitions,
+ .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
};
static struct i2c_board_info aspenite_i2c_info[] __initdata = {
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index d90c74fa614d..c7897fb2b6da 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -178,11 +178,8 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
#endif
#endif
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {
- .enable_arbiter = 1,
- .num_cs = 1,
-};
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct pxa3xx_nand_platform_data dkb_nand_info = {};
#endif
#if IS_ENABLED(CONFIG_MMP_DISP)
@@ -275,7 +272,7 @@ static void __init ttc_dkb_init(void)
/* on-chip devices */
pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
pxa910_add_nand(&dkb_nand_info);
#endif
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
new file mode 100644
index 000000000000..684c9c9a32bd
--- /dev/null
+++ b/arch/arm/mach-npcm/Kconfig
@@ -0,0 +1,30 @@
+menuconfig ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ depends on ARCH_MULTI_V7
+ select PINCTRL
+
+if ARCH_NPCM
+
+config ARCH_NPCM7XX
+ bool "Support for NPCM7xx BMC (Poleg)"
+ depends on ARCH_MULTI_V7
+ select PINCTRL_NPCM7XX
+ select NPCM7XX_TIMER
+ select ARCH_REQUIRE_GPIOLIB
+ select CACHE_L2X0
+ select ARM_GIC
+ select HAVE_ARM_TWD if SMP
+ select HAVE_ARM_SCU if SMP
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_794072
+ select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
+ select MFD_SYSCON
+ help
+ General support for NPCM7xx BMC (Poleg).
+
+ Nuvoton NPCM7xx BMC based on the Cortex A9.
+
+endif
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
new file mode 100644
index 000000000000..f5f67201419f
--- /dev/null
+++ b/arch/arm/mach-npcm/Makefile
@@ -0,0 +1,4 @@
+AFLAGS_headsmp.o += -march=armv7-a
+
+obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
new file mode 100644
index 000000000000..c083fe09a07b
--- /dev/null
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+/*
+ * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
+ * here.
+ */
+ENTRY(npcm7xx_secondary_startup)
+ safe_svcmode_maskall r0
+
+ b secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
new file mode 100644
index 000000000000..5f7cd88103ef
--- /dev/null
+++ b/arch/arm/mach-npcm/npcm7xx.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static const char *const npcm7xx_dt_match[] = {
+ "nuvoton,npcm750",
+ NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family")
+ .atag_offset = 0x100,
+ .dt_compat = npcm7xx_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
new file mode 100644
index 000000000000..21633c70fe7f
--- /dev/null
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#define pr_fmt(fmt) "nuvoton,npcm7xx-smp: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+extern void npcm7xx_secondary_startup(void);
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ struct device_node *gcr_np;
+ void __iomem *gcr_base;
+ int ret = 0;
+
+ gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+ if (!gcr_np) {
+ pr_err("no gcr device node\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ gcr_base = of_iomap(gcr_np, 0);
+ if (!gcr_base) {
+ pr_err("could not iomap gcr");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* give boot ROM kernel start address. */
+ iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
+ NPCM7XX_SCRPAD_REG);
+ /* make sure the previous write is seen by all observers. */
+ dsb_sev();
+
+ iounmap(gcr_base);
+out:
+ return ret;
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *scu_np;
+ void __iomem *scu_base;
+
+ scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!scu_np) {
+ pr_err("no scu device node\n");
+ return;
+ }
+ scu_base = of_iomap(scu_np, 0);
+ if (!scu_base) {
+ pr_err("could not iomap scu");
+ return;
+ }
+
+ scu_enable(scu_base);
+
+ iounmap(scu_base);
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+ .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+ .smp_boot_secondary = npcm7xx_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm750-smp", &npcm7xx_smp_ops);
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index f0808fcc5acc..8584cdd1c827 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -33,11 +33,6 @@ static const char *const nspire_dt_match[] __initconst = {
NULL,
};
-static void __init nspire_map_io(void)
-{
- debug_ll_io_init();
-}
-
static struct clcd_board nspire_clcd_data = {
.name = "LCD",
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
@@ -71,7 +66,6 @@ static void nspire_restart(enum reboot_mode mode, const char *cmd)
DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
.dt_compat = nspire_dt_match,
- .map_io = nspire_map_io,
.init_machine = nspire_init,
.restart = nspire_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 45c6b733c881..c4694f26b5c4 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -30,6 +30,7 @@ config ARCH_OMAP16XX
bool "OMAP16xx Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
+ select OMAP_DM_TIMER
config OMAP_MUX
bool "OMAP multiplexing support"
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 65bb6e8085de..d83ff257eaa8 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -32,11 +32,10 @@
#include <asm/exception.h>
-#include <plat/i2c.h>
-
#include <mach/irqs.h>
#include "soc.h"
+#include "i2c.h"
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 32f6c53367bf..5bdf3c4190f9 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -24,8 +24,6 @@
#include <mach/mux.h>
#include "soc.h"
-#include <plat/i2c.h>
-
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/mach-omap1/i2c.h
index 810629d79668..54a2bce7879e 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/mach-omap1/i2c.h
@@ -19,8 +19,8 @@
*
*/
-#ifndef __PLAT_OMAP_I2C_H
-#define __PLAT_OMAP_I2C_H
+#ifndef __ARCH_ARM_MACH_OMAP1_I2C_H
+#define __ARCH_ARM_MACH_OMAP1_I2C_H
struct i2c_board_info;
struct omap_i2c_bus_platform_data;
@@ -47,7 +47,4 @@ static inline int omap_register_i2c_bus_cmdline(void)
}
#endif
-struct omap_hwmod;
-int omap_i2c_reset(struct omap_hwmod *oh);
-
-#endif /* __PLAT_OMAP_I2C_H */
+#endif /* __ARCH_ARM_MACH_OMAP1_I2C_H */
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index f1135bf8940e..3e1de14805e4 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -55,7 +55,7 @@
#include <mach/tc.h>
#include <mach/mux.h>
#include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 8fb1ec6fa999..4447210c9b0d 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -27,7 +27,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 00b1f17f8d44..9f27b486a536 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -72,6 +72,7 @@ config SOC_AM43XX
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
+ select ARM_CPU_SUSPEND if PM
config SOC_DRA7XX
bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c15bbcad5f67..4603c30fef73 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -88,6 +88,8 @@ omap-4-5-pm-common += pm44xx.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_AM33XX) += pm33xx-core.o sleep33xx.o
+obj-$(CONFIG_SOC_AM43XX) += pm33xx-core.o sleep43xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
@@ -95,6 +97,8 @@ obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep33xx.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep43xx.o :=-Wa,-march=armv7-a$(plus_sec)
endif
@@ -232,3 +236,15 @@ obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
+
+arch/arm/mach-omap2/pm-asm-offsets.s: arch/arm/mach-omap2/pm-asm-offsets.c
+ $(call if_changed_dep,cc_s_c)
+
+include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
+ $(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
+
+# For rule to generate ti-emif-asm-offsets.h dependency
+include drivers/memory/Makefile.asm-offsets
+
+arch/arm/mach-omap2/sleep33xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
+arch/arm/mach-omap2/sleep43xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 20f25539d572..75bc18646df6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -566,11 +566,11 @@ static int n8x0_menelaus_late_init(struct device *dev)
}
#endif
-struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
+struct menelaus_platform_data n8x0_menelaus_platform_data = {
.late_init = n8x0_menelaus_late_init,
};
-struct aic3x_pdata n810_aic33_data __initdata = {
+struct aic3x_pdata n810_aic33_data = {
.gpio_reset = 118,
};
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index bc202835371b..fbe0b78bf489 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -77,6 +77,13 @@ static inline int omap4_pm_init_early(void)
}
#endif
+#if defined(CONFIG_PM) && (defined(CONFIG_SOC_AM33XX) || \
+ defined(CONFIG_SOC_AM43XX))
+void amx3_common_pm_init(void);
+#else
+static inline void amx3_common_pm_init(void) { }
+#endif
+
extern void omap2_init_common_infrastructure(void);
extern void omap_init_time(void);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index bd8089ff929f..180da403639e 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -623,6 +623,7 @@ void __init omap3_ctrl_init(void)
struct control_init_data {
int index;
+ void __iomem *mem;
s16 offset;
};
@@ -635,6 +636,10 @@ static const struct control_init_data omap2_ctrl_data = {
.offset = -OMAP2_CONTROL_GENERAL,
};
+static const struct control_init_data ctrl_aux_data = {
+ .index = TI_CLKM_CTRL_AUX,
+};
+
static const struct of_device_id omap_scrm_dt_match_table[] = {
{ .compatible = "ti,am3-scm", .data = &ctrl_data },
{ .compatible = "ti,am4-scm", .data = &ctrl_data },
@@ -644,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
{ .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
{ .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data },
{ .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
{ }
};
@@ -660,15 +666,21 @@ int __init omap2_control_base_init(void)
struct device_node *np;
const struct of_device_id *match;
struct control_init_data *data;
+ void __iomem *mem;
for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
data = (struct control_init_data *)match->data;
- omap2_ctrl_base = of_iomap(np, 0);
- if (!omap2_ctrl_base)
+ mem = of_iomap(np, 0);
+ if (!mem)
return -ENOMEM;
- omap2_ctrl_offset = data->offset;
+ if (data->index == TI_CLKM_CTRL) {
+ omap2_ctrl_base = mem;
+ omap2_ctrl_offset = data->offset;
+ }
+
+ data->mem = mem;
}
return 0;
@@ -713,7 +725,7 @@ int __init omap_control_init(void)
} else {
/* No scm_conf found, direct access */
ret = omap2_clk_provider_init(np, data->index, NULL,
- omap2_ctrl_base);
+ data->mem);
if (ret)
return ret;
}
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 93057fb65f44..ed6f074ea672 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/gpio.h>
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 6d28aa20a7d3..b064066d431c 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -13,9 +13,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/mmc/host.h>
-#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
index 42b6f2e7d190..4d085c7ad425 100644
--- a/arch/arm/mach-omap2/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -19,23 +19,10 @@
*
*/
-#include <plat/i2c.h>
-
#ifndef __MACH_OMAP2_I2C_H
#define __MACH_OMAP2_I2C_H
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
- u8 fifo_depth;
- u32 flags;
-};
+struct omap_hwmod;
int omap_i2c_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cb5d7314cf99..cf546dfe3b32 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -622,6 +622,7 @@ void __init am33xx_init_early(void)
void __init am33xx_init_late(void)
{
omap_common_late_init();
+ amx3_common_pm_init();
}
#endif
@@ -646,6 +647,7 @@ void __init am43xx_init_late(void)
{
omap_common_late_init();
omap2_clk_enable_autoidle_all();
+ amx3_common_pm_init();
}
#endif
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 5a3bc3de58d0..978fba722b82 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -23,7 +23,6 @@
#include <linux/kernel.h>
#include <linux/err.h>
-#include <linux/platform_data/gpio-omap.h>
#include "prm.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index 5b2966a0f733..9fc4e2643ce7 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -28,7 +28,7 @@
#define L2X0_AUXCTRL_OFFSET 0xff8
#define L2X0_PREFETCH_CTRL_OFFSET 0xffc
-/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
+/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK1 */
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08
#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index f0388058b7da..3b829a50d1db 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -140,6 +140,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
struct omap_device *od;
struct omap_hwmod *oh;
struct device_node *node = pdev->dev.of_node;
+ struct resource res;
const char *oh_name;
int oh_cnt, i, ret = 0;
bool device_active = false;
@@ -150,6 +151,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
return -ENODEV;
}
+ /* Use ti-sysc driver instead of omap_device? */
+ if (!omap_hwmod_parse_module_range(NULL, node, &res))
+ return -ENODEV;
+
hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
if (!hwmods) {
ret = -ENOMEM;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 34156eca8e23..e7d23e200ecc 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -145,6 +145,8 @@
#include <linux/platform_data/ti-sysc.h>
+#include <dt-bindings/bus/ti-sysc.h>
+
#include <asm/system_misc.h>
#include "clock.h"
@@ -2498,7 +2500,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
* affects the IP block hardware, or system integration hardware
* associated with the IP block. Returns 0.
*/
-static int __init _setup(struct omap_hwmod *oh, void *data)
+static int _setup(struct omap_hwmod *oh, void *data)
{
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return 0;
@@ -3060,6 +3062,414 @@ int __init omap_hwmod_setup_one(const char *oh_name)
return 0;
}
+static void omap_hwmod_check_one(struct device *dev,
+ const char *name, s8 v1, u8 v2)
+{
+ if (v1 < 0)
+ return;
+
+ if (v1 != v2)
+ dev_warn(dev, "%s %d != %d\n", name, v1, v2);
+}
+
+/**
+ * omap_hwmod_check_sysc - check sysc against platform sysc
+ * @dev: struct device
+ * @data: module data
+ * @sysc_fields: new sysc configuration
+ */
+static int omap_hwmod_check_sysc(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ struct sysc_regbits *sysc_fields)
+{
+ const struct sysc_regbits *regbits = data->cap->regbits;
+
+ omap_hwmod_check_one(dev, "dmadisable_shift",
+ regbits->dmadisable_shift,
+ sysc_fields->dmadisable_shift);
+ omap_hwmod_check_one(dev, "midle_shift",
+ regbits->midle_shift,
+ sysc_fields->midle_shift);
+ omap_hwmod_check_one(dev, "sidle_shift",
+ regbits->sidle_shift,
+ sysc_fields->sidle_shift);
+ omap_hwmod_check_one(dev, "clkact_shift",
+ regbits->clkact_shift,
+ sysc_fields->clkact_shift);
+ omap_hwmod_check_one(dev, "enwkup_shift",
+ regbits->enwkup_shift,
+ sysc_fields->enwkup_shift);
+ omap_hwmod_check_one(dev, "srst_shift",
+ regbits->srst_shift,
+ sysc_fields->srst_shift);
+ omap_hwmod_check_one(dev, "autoidle_shift",
+ regbits->autoidle_shift,
+ sysc_fields->autoidle_shift);
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_init_regbits - init sysconfig specific register bits
+ * @dev: struct device
+ * @data: module data
+ * @sysc_fields: new sysc configuration
+ */
+static int omap_hwmod_init_regbits(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ struct sysc_regbits **sysc_fields)
+{
+ *sysc_fields = NULL;
+
+ switch (data->cap->type) {
+ case TI_SYSC_OMAP2:
+ case TI_SYSC_OMAP2_TIMER:
+ *sysc_fields = &omap_hwmod_sysc_type1;
+ break;
+ case TI_SYSC_OMAP3_SHAM:
+ *sysc_fields = &omap3_sham_sysc_fields;
+ break;
+ case TI_SYSC_OMAP3_AES:
+ *sysc_fields = &omap3xxx_aes_sysc_fields;
+ break;
+ case TI_SYSC_OMAP4:
+ case TI_SYSC_OMAP4_TIMER:
+ *sysc_fields = &omap_hwmod_sysc_type2;
+ break;
+ case TI_SYSC_OMAP4_SIMPLE:
+ *sysc_fields = &omap_hwmod_sysc_type3;
+ break;
+ case TI_SYSC_OMAP34XX_SR:
+ *sysc_fields = &omap34xx_sr_sysc_fields;
+ break;
+ case TI_SYSC_OMAP36XX_SR:
+ *sysc_fields = &omap36xx_sr_sysc_fields;
+ break;
+ case TI_SYSC_OMAP4_SR:
+ *sysc_fields = &omap36xx_sr_sysc_fields;
+ break;
+ case TI_SYSC_OMAP4_MCASP:
+ *sysc_fields = &omap_hwmod_sysc_type_mcasp;
+ break;
+ case TI_SYSC_OMAP4_USB_HOST_FS:
+ *sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return omap_hwmod_check_sysc(dev, data, *sysc_fields);
+}
+
+/**
+ * omap_hwmod_init_reg_offs - initialize sysconfig register offsets
+ * @dev: struct device
+ * @data: module data
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysc register offset
+ * @syss_offs: syss register offset
+ */
+int omap_hwmod_init_reg_offs(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ u32 *rev_offs, u32 *sysc_offs, u32 *syss_offs)
+{
+ *rev_offs = 0;
+ *sysc_offs = 0;
+ *syss_offs = 0;
+
+ if (data->offsets[SYSC_REVISION] > 0)
+ *rev_offs = data->offsets[SYSC_REVISION];
+
+ if (data->offsets[SYSC_SYSCONFIG] > 0)
+ *sysc_offs = data->offsets[SYSC_SYSCONFIG];
+
+ if (data->offsets[SYSC_SYSSTATUS] > 0)
+ *syss_offs = data->offsets[SYSC_SYSSTATUS];
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_init_sysc_flags - initialize sysconfig features
+ * @dev: struct device
+ * @data: module data
+ * @sysc_flags: module configuration
+ */
+int omap_hwmod_init_sysc_flags(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ u32 *sysc_flags)
+{
+ *sysc_flags = 0;
+
+ switch (data->cap->type) {
+ case TI_SYSC_OMAP2:
+ case TI_SYSC_OMAP2_TIMER:
+ /* See SYSC_OMAP2_* in include/dt-bindings/bus/ti-sysc.h */
+ if (data->cfg->sysc_val & SYSC_OMAP2_CLOCKACTIVITY)
+ *sysc_flags |= SYSC_HAS_CLOCKACTIVITY;
+ if (data->cfg->sysc_val & SYSC_OMAP2_EMUFREE)
+ *sysc_flags |= SYSC_HAS_EMUFREE;
+ if (data->cfg->sysc_val & SYSC_OMAP2_ENAWAKEUP)
+ *sysc_flags |= SYSC_HAS_ENAWAKEUP;
+ if (data->cfg->sysc_val & SYSC_OMAP2_SOFTRESET)
+ *sysc_flags |= SYSC_HAS_SOFTRESET;
+ if (data->cfg->sysc_val & SYSC_OMAP2_AUTOIDLE)
+ *sysc_flags |= SYSC_HAS_AUTOIDLE;
+ break;
+ case TI_SYSC_OMAP4:
+ case TI_SYSC_OMAP4_TIMER:
+ /* See SYSC_OMAP4_* in include/dt-bindings/bus/ti-sysc.h */
+ if (data->cfg->sysc_val & SYSC_OMAP4_DMADISABLE)
+ *sysc_flags |= SYSC_HAS_DMADISABLE;
+ if (data->cfg->sysc_val & SYSC_OMAP4_FREEEMU)
+ *sysc_flags |= SYSC_HAS_EMUFREE;
+ if (data->cfg->sysc_val & SYSC_OMAP4_SOFTRESET)
+ *sysc_flags |= SYSC_HAS_SOFTRESET;
+ break;
+ case TI_SYSC_OMAP34XX_SR:
+ case TI_SYSC_OMAP36XX_SR:
+ /* See SYSC_OMAP3_SR_* in include/dt-bindings/bus/ti-sysc.h */
+ if (data->cfg->sysc_val & SYSC_OMAP3_SR_ENAWAKEUP)
+ *sysc_flags |= SYSC_HAS_ENAWAKEUP;
+ break;
+ default:
+ if (data->cap->regbits->emufree_shift >= 0)
+ *sysc_flags |= SYSC_HAS_EMUFREE;
+ if (data->cap->regbits->enwkup_shift >= 0)
+ *sysc_flags |= SYSC_HAS_ENAWAKEUP;
+ if (data->cap->regbits->srst_shift >= 0)
+ *sysc_flags |= SYSC_HAS_SOFTRESET;
+ if (data->cap->regbits->autoidle_shift >= 0)
+ *sysc_flags |= SYSC_HAS_AUTOIDLE;
+ break;
+ }
+
+ if (data->cap->regbits->midle_shift >= 0 &&
+ data->cfg->midlemodes)
+ *sysc_flags |= SYSC_HAS_MIDLEMODE;
+
+ if (data->cap->regbits->sidle_shift >= 0 &&
+ data->cfg->sidlemodes)
+ *sysc_flags |= SYSC_HAS_SIDLEMODE;
+
+ if (data->cfg->quirks & SYSC_QUIRK_UNCACHED)
+ *sysc_flags |= SYSC_NO_CACHE;
+ if (data->cfg->quirks & SYSC_QUIRK_RESET_STATUS)
+ *sysc_flags |= SYSC_HAS_RESET_STATUS;
+
+ if (data->cfg->syss_mask & 1)
+ *sysc_flags |= SYSS_HAS_RESET_STATUS;
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_init_idlemodes - initialize module idle modes
+ * @dev: struct device
+ * @data: module data
+ * @idlemodes: module supported idle modes
+ */
+int omap_hwmod_init_idlemodes(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ u32 *idlemodes)
+{
+ *idlemodes = 0;
+
+ if (data->cfg->midlemodes & BIT(SYSC_IDLE_FORCE))
+ *idlemodes |= MSTANDBY_FORCE;
+ if (data->cfg->midlemodes & BIT(SYSC_IDLE_NO))
+ *idlemodes |= MSTANDBY_NO;
+ if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART))
+ *idlemodes |= MSTANDBY_SMART;
+ if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART_WKUP))
+ *idlemodes |= MSTANDBY_SMART_WKUP;
+
+ if (data->cfg->sidlemodes & BIT(SYSC_IDLE_FORCE))
+ *idlemodes |= SIDLE_FORCE;
+ if (data->cfg->sidlemodes & BIT(SYSC_IDLE_NO))
+ *idlemodes |= SIDLE_NO;
+ if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART))
+ *idlemodes |= SIDLE_SMART;
+ if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART_WKUP))
+ *idlemodes |= SIDLE_SMART_WKUP;
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_check_module - check new module against platform data
+ * @dev: struct device
+ * @oh: module
+ * @data: new module data
+ * @sysc_fields: sysc register bits
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysconfig register offset
+ * @syss_offs: sysstatus register offset
+ * @sysc_flags: sysc specific flags
+ * @idlemodes: sysc supported idlemodes
+ */
+static int omap_hwmod_check_module(struct device *dev,
+ struct omap_hwmod *oh,
+ const struct ti_sysc_module_data *data,
+ struct sysc_regbits *sysc_fields,
+ u32 rev_offs, u32 sysc_offs,
+ u32 syss_offs, u32 sysc_flags,
+ u32 idlemodes)
+{
+ if (!oh->class->sysc)
+ return -ENODEV;
+
+ if (sysc_fields != oh->class->sysc->sysc_fields)
+ dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
+ oh->class->sysc->sysc_fields);
+
+ if (rev_offs != oh->class->sysc->rev_offs)
+ dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
+ oh->class->sysc->rev_offs);
+ if (sysc_offs != oh->class->sysc->sysc_offs)
+ dev_warn(dev, "sysc_offs %08x != %08x\n", sysc_offs,
+ oh->class->sysc->sysc_offs);
+ if (syss_offs != oh->class->sysc->syss_offs)
+ dev_warn(dev, "syss_offs %08x != %08x\n", syss_offs,
+ oh->class->sysc->syss_offs);
+
+ if (sysc_flags != oh->class->sysc->sysc_flags)
+ dev_warn(dev, "sysc_flags %08x != %08x\n", sysc_flags,
+ oh->class->sysc->sysc_flags);
+
+ if (idlemodes != oh->class->sysc->idlemodes)
+ dev_warn(dev, "idlemodes %08x != %08x\n", idlemodes,
+ oh->class->sysc->idlemodes);
+
+ if (data->cfg->srst_udelay != oh->class->sysc->srst_udelay)
+ dev_warn(dev, "srst_udelay %i != %i\n",
+ data->cfg->srst_udelay,
+ oh->class->sysc->srst_udelay);
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_allocate_module - allocate new module
+ * @dev: struct device
+ * @oh: module
+ * @sysc_fields: sysc register bits
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysconfig register offset
+ * @syss_offs: sysstatus register offset
+ * @sysc_flags: sysc specific flags
+ * @idlemodes: sysc supported idlemodes
+ *
+ * Note that the allocations here cannot use devm as ti-sysc can rebind.
+ */
+int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
+ const struct ti_sysc_module_data *data,
+ struct sysc_regbits *sysc_fields,
+ u32 rev_offs, u32 sysc_offs, u32 syss_offs,
+ u32 sysc_flags, u32 idlemodes)
+{
+ struct omap_hwmod_class_sysconfig *sysc;
+ struct omap_hwmod_class *class;
+ void __iomem *regs = NULL;
+ unsigned long flags;
+
+ sysc = kzalloc(sizeof(*sysc), GFP_KERNEL);
+ if (!sysc)
+ return -ENOMEM;
+
+ sysc->sysc_fields = sysc_fields;
+ sysc->rev_offs = rev_offs;
+ sysc->sysc_offs = sysc_offs;
+ sysc->syss_offs = syss_offs;
+ sysc->sysc_flags = sysc_flags;
+ sysc->idlemodes = idlemodes;
+ sysc->srst_udelay = data->cfg->srst_udelay;
+
+ if (!oh->_mpu_rt_va) {
+ regs = ioremap(data->module_pa,
+ data->module_size);
+ if (!regs)
+ return -ENOMEM;
+ }
+
+ /*
+ * We need new oh->class as the other devices in the same class
+ * may not yet have ioremapped their registers.
+ */
+ class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
+ if (!class)
+ return -ENOMEM;
+
+ class->sysc = sysc;
+
+ spin_lock_irqsave(&oh->_lock, flags);
+ if (regs)
+ oh->_mpu_rt_va = regs;
+ oh->class = class;
+ oh->_state = _HWMOD_STATE_INITIALIZED;
+ _setup(oh, NULL);
+ spin_unlock_irqrestore(&oh->_lock, flags);
+
+ return 0;
+}
+
+/**
+ * omap_hwmod_init_module - initialize new module
+ * @dev: struct device
+ * @data: module data
+ * @cookie: cookie for the caller to use for later calls
+ */
+int omap_hwmod_init_module(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ struct ti_sysc_cookie *cookie)
+{
+ struct omap_hwmod *oh;
+ struct sysc_regbits *sysc_fields;
+ u32 rev_offs, sysc_offs, syss_offs, sysc_flags, idlemodes;
+ int error;
+
+ if (!dev || !data)
+ return -EINVAL;
+
+ oh = _lookup(data->name);
+ if (!oh)
+ return -ENODEV;
+
+ cookie->data = oh;
+
+ error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
+ if (error)
+ return error;
+
+ error = omap_hwmod_init_reg_offs(dev, data, &rev_offs,
+ &sysc_offs, &syss_offs);
+ if (error)
+ return error;
+
+ error = omap_hwmod_init_sysc_flags(dev, data, &sysc_flags);
+ if (error)
+ return error;
+
+ error = omap_hwmod_init_idlemodes(dev, data, &idlemodes);
+ if (error)
+ return error;
+
+ if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE_ON_INIT)
+ oh->flags |= HWMOD_INIT_NO_IDLE;
+ if (data->cfg->quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
+ oh->flags |= HWMOD_INIT_NO_RESET;
+
+ error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
+ rev_offs, sysc_offs, syss_offs,
+ sysc_flags, idlemodes);
+ if (!error)
+ return error;
+
+ return omap_hwmod_allocate_module(dev, oh, data, sysc_fields,
+ rev_offs, sysc_offs, syss_offs,
+ sysc_flags, idlemodes);
+}
+
/**
* omap_hwmod_setup_earlycon_flags - set up flags for early console
*
@@ -3082,6 +3492,12 @@ static void __init omap_hwmod_setup_earlycon_flags(void)
if (np) {
uart = of_get_property(np, "ti,hwmods", NULL);
oh = omap_hwmod_lookup(uart);
+ if (!oh) {
+ uart = of_get_property(np->parent,
+ "ti,hwmods",
+ NULL);
+ oh = omap_hwmod_lookup(uart);
+ }
if (oh)
oh->flags |= DEBUG_OMAPUART_FLAGS;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 0b8e19f40402..c7122abbf977 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -620,6 +620,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
struct device_node *np,
struct resource *res);
+struct ti_sysc_module_data;
+struct ti_sysc_cookie;
+
+int omap_hwmod_init_module(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ struct ti_sysc_cookie *cookie);
+
int omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 0afb014b211f..fe66cf247874 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -14,9 +14,7 @@
*/
#include <linux/i2c-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
@@ -97,13 +95,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
/* I2C1 */
static struct omap_hwmod omap2420_i2c1_hwmod = {
.name = "i2c1",
@@ -116,7 +107,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
/*
* From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
* while a transfer is active seems to cause the I2C block to
@@ -137,7 +127,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
.flags = HWMOD_16BIT_REG,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 013b26b305d2..74eefd30518c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -14,11 +14,8 @@
*/
#include <linux/i2c-omap.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
@@ -75,12 +72,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
- OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
-};
-
/* I2C1 */
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
@@ -102,7 +93,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
};
/* I2C2 */
@@ -118,7 +108,6 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
};
/* gpio5 */
@@ -134,7 +123,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
},
},
.class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &omap2xxx_gpio_dev_attr,
};
/* dma attributes */
@@ -167,10 +155,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
};
/* mcspi3 */
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap2430_mcspi3_hwmod = {
.name = "mcspi3",
.main_clk = "mcspi3_fck",
@@ -182,7 +166,6 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = {
},
},
.class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi3_dev_attr,
};
/* usbhsotg */
@@ -239,7 +222,6 @@ static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap2430_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE2,
};
static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 4b094cb384cb..5345919a81f8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -9,10 +9,8 @@
* published by the Free Software Foundation.
*/
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
#include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -159,7 +157,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
struct omap_hwmod_class omap2xxx_mcspi_class = {
.name = "mcspi",
.sysc = &omap2xxx_mcspi_sysc,
- .rev = OMAP2_MCSPI_REV,
};
/*
@@ -220,23 +217,7 @@ struct omap_hwmod omap2xxx_iva_hwmod = {
.class = &iva_hwmod_class,
};
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
/* timer1 */
-
struct omap_hwmod omap2xxx_timer1_hwmod = {
.name = "timer1",
.main_clk = "gpt1_fck",
@@ -247,13 +228,11 @@ struct omap_hwmod omap2xxx_timer1_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer2 */
-
struct omap_hwmod omap2xxx_timer2_hwmod = {
.name = "timer2",
.main_clk = "gpt2_fck",
@@ -269,7 +248,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = {
};
/* timer3 */
-
struct omap_hwmod omap2xxx_timer3_hwmod = {
.name = "timer3",
.main_clk = "gpt3_fck",
@@ -285,7 +263,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = {
};
/* timer4 */
-
struct omap_hwmod omap2xxx_timer4_hwmod = {
.name = "timer4",
.main_clk = "gpt4_fck",
@@ -301,7 +278,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = {
};
/* timer5 */
-
struct omap_hwmod omap2xxx_timer5_hwmod = {
.name = "timer5",
.main_clk = "gpt5_fck",
@@ -312,13 +288,11 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer6 */
-
struct omap_hwmod omap2xxx_timer6_hwmod = {
.name = "timer6",
.main_clk = "gpt6_fck",
@@ -329,13 +303,11 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer7 */
-
struct omap_hwmod omap2xxx_timer7_hwmod = {
.name = "timer7",
.main_clk = "gpt7_fck",
@@ -346,13 +318,11 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer8 */
-
struct omap_hwmod omap2xxx_timer8_hwmod = {
.name = "timer8",
.main_clk = "gpt8_fck",
@@ -363,13 +333,11 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer9 */
-
struct omap_hwmod omap2xxx_timer9_hwmod = {
.name = "timer9",
.main_clk = "gpt9_fck",
@@ -380,13 +348,11 @@ struct omap_hwmod omap2xxx_timer9_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer10 */
-
struct omap_hwmod omap2xxx_timer10_hwmod = {
.name = "timer10",
.main_clk = "gpt10_fck",
@@ -397,13 +363,11 @@ struct omap_hwmod omap2xxx_timer10_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer11 */
-
struct omap_hwmod omap2xxx_timer11_hwmod = {
.name = "timer11",
.main_clk = "gpt11_fck",
@@ -414,13 +378,11 @@ struct omap_hwmod omap2xxx_timer11_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer12 */
-
struct omap_hwmod omap2xxx_timer12_hwmod = {
.name = "timer12",
.main_clk = "gpt12_fck",
@@ -431,7 +393,6 @@ struct omap_hwmod omap2xxx_timer12_hwmod = {
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap2xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -568,12 +529,6 @@ struct omap_hwmod omap2xxx_dss_venc_hwmod = {
.flags = HWMOD_NO_IDLEST,
};
-/* gpio dev_attr */
-struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = false,
-};
-
/* gpio1 */
struct omap_hwmod omap2xxx_gpio1_hwmod = {
.name = "gpio1",
@@ -587,7 +542,6 @@ struct omap_hwmod omap2xxx_gpio1_hwmod = {
},
},
.class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &omap2xxx_gpio_dev_attr,
};
/* gpio2 */
@@ -603,7 +557,6 @@ struct omap_hwmod omap2xxx_gpio2_hwmod = {
},
},
.class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &omap2xxx_gpio_dev_attr,
};
/* gpio3 */
@@ -619,7 +572,6 @@ struct omap_hwmod omap2xxx_gpio3_hwmod = {
},
},
.class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &omap2xxx_gpio_dev_attr,
};
/* gpio4 */
@@ -635,14 +587,9 @@ struct omap_hwmod omap2xxx_gpio4_hwmod = {
},
},
.class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &omap2xxx_gpio_dev_attr,
};
/* mcspi1 */
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
struct omap_hwmod omap2xxx_mcspi1_hwmod = {
.name = "mcspi1",
.main_clk = "mcspi1_fck",
@@ -654,14 +601,9 @@ struct omap_hwmod omap2xxx_mcspi1_hwmod = {
},
},
.class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi1_dev_attr,
};
/* mcspi2 */
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
struct omap_hwmod omap2xxx_mcspi2_hwmod = {
.name = "mcspi2",
.main_clk = "mcspi2_fck",
@@ -673,7 +615,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
},
},
.class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi2_dev_attr,
};
static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 434bd1a77229..6f81d7a4fec1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -139,9 +139,6 @@ extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
extern struct omap_hwmod_class am33xx_spi_hwmod_class;
-extern struct omap_gpio_dev_attr gpio_dev_attr;
-extern struct omap2_mcspi_dev_attr mcspi_attrib;
-
void omap_hwmod_am33xx_reg(void);
void omap_hwmod_am43xx_reg(void);
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 4bcf9f3e1544..5efe91c6e95b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -14,9 +14,9 @@
* GNU General Public License for more details.
*/
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
+
#include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
#include "wd_timer.h"
@@ -537,11 +537,6 @@ struct omap_hwmod_class am33xx_gpio_hwmod_class = {
.rev = 2,
};
-struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -560,7 +555,6 @@ struct omap_hwmod am33xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio2 */
@@ -581,7 +575,6 @@ struct omap_hwmod am33xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio3 */
@@ -602,7 +595,6 @@ struct omap_hwmod am33xx_gpio3_hwmod = {
},
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpmc */
@@ -654,10 +646,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
struct omap_hwmod am33xx_i2c1_hwmod = {
.name = "i2c1",
@@ -670,7 +658,6 @@ struct omap_hwmod am33xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c1 */
@@ -685,7 +672,6 @@ struct omap_hwmod am33xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -700,7 +686,6 @@ struct omap_hwmod am33xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
@@ -893,13 +878,9 @@ static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
struct omap_hwmod_class am33xx_spi_hwmod_class = {
.name = "mcspi",
.sysc = &am33xx_mcspi_sysc,
- .rev = OMAP4_MCSPI_REV,
};
/* spi0 */
-struct omap2_mcspi_dev_attr mcspi_attrib = {
- .num_chipselect = 2,
-};
struct omap_hwmod am33xx_spi0_hwmod = {
.name = "spi0",
.class = &am33xx_spi_hwmod_class,
@@ -910,7 +891,6 @@ struct omap_hwmod am33xx_spi0_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi_attrib,
};
/* spi1 */
@@ -924,7 +904,6 @@ struct omap_hwmod am33xx_spi1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi_attrib,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 4d16b15bb0cf..53e1ac3724f2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -17,9 +17,6 @@
#include <linux/i2c-omap.h>
#include "omap_hwmod.h"
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
#include "omap_hwmod_common_data.h"
#include "control.h"
@@ -252,7 +249,6 @@ static struct omap_hwmod am33xx_gpio0_hwmod = {
},
.opt_clks = gpio0_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* lcdc */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1a2f2242e31b..23336b6c7125 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -17,15 +17,11 @@
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
-#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dmtimer.h>
#include "soc.h"
#include "omap_hwmod.h"
@@ -155,31 +151,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
.sysc = &omap3xxx_timer_sysc,
};
-/* secure timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON | OMAP_TIMER_SECURE,
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
-/* pwm timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
-};
-
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod = {
.name = "timer1",
@@ -191,7 +162,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -252,7 +222,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -268,7 +237,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -284,7 +252,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
- .dev_attr = &capability_dsp_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -300,7 +267,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
- .dev_attr = &capability_dsp_pwm_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -316,7 +282,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -332,7 +297,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -348,13 +312,11 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer12 */
-
static struct omap_hwmod omap3xxx_timer12_hwmod = {
.name = "timer12",
.main_clk = "gpt12_fck",
@@ -365,7 +327,6 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = {
.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
},
},
- .dev_attr = &capability_secure_dev_attr,
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -683,11 +644,6 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
};
/* I2C1 */
-static struct omap_i2c_dev_attr i2c1_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -700,15 +656,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c1_dev_attr,
};
/* I2C2 */
-static struct omap_i2c_dev_attr i2c2_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -721,17 +671,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c2_dev_attr,
};
/* I2C3 */
-static struct omap_i2c_dev_attr i2c3_dev_attr = {
- .fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-
-
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -744,7 +686,6 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c3_dev_attr,
};
/*
@@ -769,12 +710,6 @@ static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
.rev = 1,
};
-/* gpio_dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbck", },
@@ -794,7 +729,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* gpio2 */
@@ -816,7 +750,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* gpio3 */
@@ -838,7 +771,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* gpio4 */
@@ -860,7 +792,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* gpio5 */
@@ -883,7 +814,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* gpio6 */
@@ -906,7 +836,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
},
},
.class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
};
/* dma attributes */
@@ -966,7 +895,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap3xxx_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE3,
};
/* McBSP functional clock mapping */
@@ -981,7 +909,6 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
};
/* mcbsp1 */
-
static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap3xxx_mcbsp_hwmod_class,
@@ -998,11 +925,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
};
/* mcbsp2 */
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
- .sidetone = "mcbsp2_sidetone",
-};
-
static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap3xxx_mcbsp_hwmod_class,
@@ -1016,15 +938,9 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
},
.opt_clks = mcbsp234_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
- .dev_attr = &omap34xx_mcbsp2_dev_attr,
};
/* mcbsp3 */
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
- .sidetone = "mcbsp3_sidetone",
-};
-
static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
.name = "mcbsp3",
.class = &omap3xxx_mcbsp_hwmod_class,
@@ -1038,12 +954,9 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
},
.opt_clks = mcbsp234_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
- .dev_attr = &omap34xx_mcbsp3_dev_attr,
};
/* mcbsp4 */
-
-
static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
.name = "mcbsp4",
.class = &omap3xxx_mcbsp_hwmod_class,
@@ -1060,8 +973,6 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
};
/* mcbsp5 */
-
-
static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
.name = "mcbsp5",
.class = &omap3xxx_mcbsp_hwmod_class,
@@ -1090,7 +1001,6 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
};
/* mcbsp2_sidetone */
-
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
.name = "mcbsp2_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -1099,7 +1009,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
};
/* mcbsp3_sidetone */
-
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
.name = "mcbsp3_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -1258,14 +1167,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
static struct omap_hwmod_class omap34xx_mcspi_class = {
.name = "mcspi",
.sysc = &omap34xx_mcspi_sysc,
- .rev = OMAP3_MCSPI_REV,
};
/* mcspi1 */
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
static struct omap_hwmod omap34xx_mcspi1 = {
.name = "mcspi1",
.main_clk = "mcspi1_fck",
@@ -1277,14 +1181,9 @@ static struct omap_hwmod omap34xx_mcspi1 = {
},
},
.class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi1_dev_attr,
};
/* mcspi2 */
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap34xx_mcspi2 = {
.name = "mcspi2",
.main_clk = "mcspi2_fck",
@@ -1296,16 +1195,9 @@ static struct omap_hwmod omap34xx_mcspi2 = {
},
},
.class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi2_dev_attr,
};
/* mcspi3 */
-
-
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap34xx_mcspi3 = {
.name = "mcspi3",
.main_clk = "mcspi3_fck",
@@ -1317,16 +1209,9 @@ static struct omap_hwmod omap34xx_mcspi3 = {
},
},
.class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi3_dev_attr,
};
/* mcspi4 */
-
-
-static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
- .num_chipselect = 1,
-};
-
static struct omap_hwmod omap34xx_mcspi4 = {
.name = "mcspi4",
.main_clk = "mcspi4_fck",
@@ -1338,7 +1223,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
},
},
.class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi4_dev_attr,
};
/* usbhsotg */
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index afbce1f6f641..5f73b730d4fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -14,8 +14,6 @@
* GNU General Public License for more details.
*/
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
@@ -107,7 +105,6 @@ static struct omap_hwmod am43xx_gpio0_hwmod = {
},
.opt_clks = gpio0_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
@@ -239,7 +236,6 @@ static struct omap_hwmod am43xx_spi2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi_attrib,
};
static struct omap_hwmod am43xx_spi3_hwmod = {
@@ -253,7 +249,6 @@ static struct omap_hwmod am43xx_spi3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi_attrib,
};
static struct omap_hwmod am43xx_spi4_hwmod = {
@@ -267,7 +262,6 @@ static struct omap_hwmod am43xx_spi4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi_attrib,
};
static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
@@ -288,7 +282,6 @@ static struct omap_hwmod am43xx_gpio4_hwmod = {
},
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
@@ -309,7 +302,6 @@ static struct omap_hwmod am43xx_gpio5_hwmod = {
},
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index a1901c22a0f0..e4f8ae9cd637 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,17 +21,12 @@
*/
#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
-
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
@@ -1083,12 +1078,6 @@ static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
.rev = 2,
};
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -1108,7 +1097,6 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio2 */
@@ -1131,7 +1119,6 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio3 */
@@ -1154,7 +1141,6 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = {
},
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio4 */
@@ -1177,7 +1163,6 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = {
},
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio5 */
@@ -1200,7 +1185,6 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = {
},
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio6 */
@@ -1223,7 +1207,6 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
},
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/*
@@ -1394,10 +1377,6 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
@@ -1412,7 +1391,6 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -1429,7 +1407,6 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -1446,7 +1423,6 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -1463,7 +1439,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
@@ -1702,7 +1677,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = {
static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap44xx_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE4,
};
/* mcbsp1 */
@@ -1860,14 +1834,9 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = {
static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = {
.name = "mcspi",
.sysc = &omap44xx_mcspi_sysc,
- .rev = OMAP4_MCSPI_REV,
};
/* mcspi1 */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
static struct omap_hwmod omap44xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &omap44xx_mcspi_hwmod_class,
@@ -1880,14 +1849,9 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi1_dev_attr,
};
/* mcspi2 */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap44xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &omap44xx_mcspi_hwmod_class,
@@ -1900,14 +1864,9 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi2_dev_attr,
};
/* mcspi3 */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap44xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &omap44xx_mcspi_hwmod_class,
@@ -1920,14 +1879,9 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi3_dev_attr,
};
/* mcspi4 */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
- .num_chipselect = 1,
-};
-
static struct omap_hwmod omap44xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &omap44xx_mcspi_hwmod_class,
@@ -1940,7 +1894,6 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi4_dev_attr,
};
/*
@@ -2547,26 +2500,6 @@ static struct omap_hwmod_class omap44xx_timer_hwmod_class = {
.sysc = &omap44xx_timer_sysc,
};
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
-/* pwm timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
-};
-
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod = {
.name = "timer1",
@@ -2581,7 +2514,6 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
};
/* timer2 */
@@ -2643,7 +2575,6 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_dsp_dev_attr,
};
/* timer6 */
@@ -2659,7 +2590,6 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_dsp_dev_attr,
};
/* timer7 */
@@ -2675,7 +2605,6 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_dsp_dev_attr,
};
/* timer8 */
@@ -2691,7 +2620,6 @@ static struct omap_hwmod omap44xx_timer8_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_dsp_pwm_dev_attr,
};
/* timer9 */
@@ -2707,7 +2635,6 @@ static struct omap_hwmod omap44xx_timer9_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_pwm_dev_attr,
};
/* timer10 */
@@ -2724,7 +2651,6 @@ static struct omap_hwmod omap44xx_timer10_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_pwm_dev_attr,
};
/* timer11 */
@@ -2740,7 +2666,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_pwm_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 988e7eaa1330..c72cd84b07ec 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -18,15 +18,11 @@
*/
#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -627,12 +623,6 @@ static struct omap_hwmod_class omap54xx_gpio_hwmod_class = {
.rev = 2,
};
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -652,7 +642,6 @@ static struct omap_hwmod omap54xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio2 */
@@ -675,7 +664,6 @@ static struct omap_hwmod omap54xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio3 */
@@ -698,7 +686,6 @@ static struct omap_hwmod omap54xx_gpio3_hwmod = {
},
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio4 */
@@ -721,7 +708,6 @@ static struct omap_hwmod omap54xx_gpio4_hwmod = {
},
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio5 */
@@ -744,7 +730,6 @@ static struct omap_hwmod omap54xx_gpio5_hwmod = {
},
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio6 */
@@ -767,7 +752,6 @@ static struct omap_hwmod omap54xx_gpio6_hwmod = {
},
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio7 */
@@ -790,7 +774,6 @@ static struct omap_hwmod omap54xx_gpio7_hwmod = {
},
.opt_clks = gpio7_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio8 */
@@ -813,7 +796,6 @@ static struct omap_hwmod omap54xx_gpio8_hwmod = {
},
.opt_clks = gpio8_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/*
@@ -839,11 +821,6 @@ static struct omap_hwmod_class omap54xx_i2c_hwmod_class = {
.rev = OMAP_I2C_IP_VERSION_2,
};
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod omap54xx_i2c1_hwmod = {
.name = "i2c1",
@@ -858,7 +835,6 @@ static struct omap_hwmod omap54xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -875,7 +851,6 @@ static struct omap_hwmod omap54xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -892,7 +867,6 @@ static struct omap_hwmod omap54xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -909,7 +883,6 @@ static struct omap_hwmod omap54xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c5 */
@@ -926,7 +899,6 @@ static struct omap_hwmod omap54xx_i2c5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
@@ -1012,7 +984,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = {
static struct omap_hwmod_class omap54xx_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap54xx_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE4,
};
/* mcbsp1 */
@@ -1149,15 +1120,9 @@ static struct omap_hwmod_class_sysconfig omap54xx_mcspi_sysc = {
static struct omap_hwmod_class omap54xx_mcspi_hwmod_class = {
.name = "mcspi",
.sysc = &omap54xx_mcspi_sysc,
- .rev = OMAP4_MCSPI_REV,
};
/* mcspi1 */
-/* mcspi1 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
static struct omap_hwmod omap54xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &omap54xx_mcspi_hwmod_class,
@@ -1170,15 +1135,9 @@ static struct omap_hwmod omap54xx_mcspi1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi1_dev_attr,
};
/* mcspi2 */
-/* mcspi2 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap54xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &omap54xx_mcspi_hwmod_class,
@@ -1191,15 +1150,9 @@ static struct omap_hwmod omap54xx_mcspi2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi2_dev_attr,
};
/* mcspi3 */
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod omap54xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &omap54xx_mcspi_hwmod_class,
@@ -1212,15 +1165,9 @@ static struct omap_hwmod omap54xx_mcspi3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi3_dev_attr,
};
/* mcspi4 */
-/* mcspi4 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
- .num_chipselect = 1,
-};
-
static struct omap_hwmod omap54xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &omap54xx_mcspi_hwmod_class,
@@ -1233,7 +1180,6 @@ static struct omap_hwmod omap54xx_mcspi4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi4_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 4c2a05b1bd19..62352d1e6361 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -18,15 +18,11 @@
*/
#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include <linux/omap-dma.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
@@ -818,12 +814,6 @@ static struct omap_hwmod_class dra7xx_gpio_hwmod_class = {
.rev = 2,
};
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -844,7 +834,6 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio2 */
@@ -867,7 +856,6 @@ static struct omap_hwmod dra7xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio3 */
@@ -890,7 +878,6 @@ static struct omap_hwmod dra7xx_gpio3_hwmod = {
},
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio4 */
@@ -913,7 +900,6 @@ static struct omap_hwmod dra7xx_gpio4_hwmod = {
},
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio5 */
@@ -936,7 +922,6 @@ static struct omap_hwmod dra7xx_gpio5_hwmod = {
},
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio6 */
@@ -959,7 +944,6 @@ static struct omap_hwmod dra7xx_gpio6_hwmod = {
},
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio7 */
@@ -982,7 +966,6 @@ static struct omap_hwmod dra7xx_gpio7_hwmod = {
},
.opt_clks = gpio7_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/* gpio8 */
@@ -1005,7 +988,6 @@ static struct omap_hwmod dra7xx_gpio8_hwmod = {
},
.opt_clks = gpio8_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
/*
@@ -1105,11 +1087,6 @@ static struct omap_hwmod_class dra7xx_i2c_hwmod_class = {
.rev = OMAP_I2C_IP_VERSION_2,
};
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod dra7xx_i2c1_hwmod = {
.name = "i2c1",
@@ -1124,7 +1101,6 @@ static struct omap_hwmod dra7xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -1141,7 +1117,6 @@ static struct omap_hwmod dra7xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -1158,7 +1133,6 @@ static struct omap_hwmod dra7xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -1175,7 +1149,6 @@ static struct omap_hwmod dra7xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c5 */
@@ -1192,7 +1165,6 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
@@ -1401,15 +1373,9 @@ static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
.name = "mcspi",
.sysc = &dra7xx_mcspi_sysc,
- .rev = OMAP4_MCSPI_REV,
};
/* mcspi1 */
-/* mcspi1 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
static struct omap_hwmod dra7xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &dra7xx_mcspi_hwmod_class,
@@ -1422,15 +1388,9 @@ static struct omap_hwmod dra7xx_mcspi1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi1_dev_attr,
};
/* mcspi2 */
-/* mcspi2 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod dra7xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &dra7xx_mcspi_hwmod_class,
@@ -1443,15 +1403,9 @@ static struct omap_hwmod dra7xx_mcspi2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi2_dev_attr,
};
/* mcspi3 */
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
static struct omap_hwmod dra7xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &dra7xx_mcspi_hwmod_class,
@@ -1464,15 +1418,9 @@ static struct omap_hwmod dra7xx_mcspi3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi3_dev_attr,
};
/* mcspi4 */
-/* mcspi4 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
- .num_chipselect = 1,
-};
-
static struct omap_hwmod dra7xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &dra7xx_mcspi_hwmod_class,
@@ -1485,7 +1433,6 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &mcspi4_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 84f118280a0e..686655f884c1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -15,10 +15,9 @@
*
*/
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
+
#include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
#include "cm81xx.h"
@@ -488,11 +487,6 @@ static struct omap_hwmod_class dm81xx_gpio_hwmod_class = {
.rev = 2,
};
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
-};
-
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "sysclk18_ck" },
};
@@ -510,7 +504,6 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
},
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = {
@@ -537,7 +530,6 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
},
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
- .dev_attr = &gpio_dev_attr,
};
static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = {
@@ -654,15 +646,10 @@ static struct omap_hwmod_class dm816x_timer_hwmod_class = {
.sysc = &dm816x_timer_sysc,
};
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
-};
-
static struct omap_hwmod dm814x_timer1_hwmod = {
.name = "timer1",
.clkdm_name = "alwon_l3s_clkdm",
.main_clk = "timer1_fck",
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
@@ -684,7 +671,6 @@ static struct omap_hwmod dm816x_timer1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -699,7 +685,6 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
.name = "timer2",
.clkdm_name = "alwon_l3s_clkdm",
.main_clk = "timer2_fck",
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
@@ -721,7 +706,6 @@ static struct omap_hwmod dm816x_timer2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -742,7 +726,6 @@ static struct omap_hwmod dm816x_timer3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -763,7 +746,6 @@ static struct omap_hwmod dm816x_timer4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -784,7 +766,6 @@ static struct omap_hwmod dm816x_timer5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -805,7 +786,6 @@ static struct omap_hwmod dm816x_timer6_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -826,7 +806,6 @@ static struct omap_hwmod dm816x_timer7_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
};
@@ -1138,11 +1117,6 @@ static struct omap_hwmod_class_sysconfig dm816x_mcspi_sysc = {
static struct omap_hwmod_class dm816x_mcspi_class = {
.name = "mcspi",
.sysc = &dm816x_mcspi_sysc,
- .rev = OMAP3_MCSPI_REV,
-};
-
-static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = {
- .num_chipselect = 4,
};
static struct omap_hwmod dm81xx_mcspi1_hwmod = {
@@ -1156,7 +1130,6 @@ static struct omap_hwmod dm81xx_mcspi1_hwmod = {
},
},
.class = &dm816x_mcspi_class,
- .dev_attr = &dm816x_mcspi1_dev_attr,
};
static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 29a52df2de26..56dbaca9a728 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -19,7 +19,6 @@
#include "display.h"
/* Common IP block data across OMAP2xxx */
-extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
extern struct omap_hwmod omap2xxx_l3_main_hwmod;
extern struct omap_hwmod omap2xxx_l4_core_hwmod;
extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 6b433fce65a5..6459816c2879 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -17,17 +17,17 @@
#include <linux/wl12xx.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
+#include <linux/power/smartreflex.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/ti-sysc.h>
#include <linux/platform_data/wkup_m3.h>
-#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_data/media/ir-rx51.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
#include "common.h"
#include "common-board-devices.h"
@@ -454,6 +454,43 @@ static void __init dra7x_evm_mmc_quirk(void)
}
#endif
+static int ti_sysc_enable_module(struct device *dev,
+ const struct ti_sysc_cookie *cookie)
+{
+ if (!cookie->data)
+ return -EINVAL;
+
+ return omap_hwmod_enable(cookie->data);
+}
+
+static int ti_sysc_idle_module(struct device *dev,
+ const struct ti_sysc_cookie *cookie)
+{
+ if (!cookie->data)
+ return -EINVAL;
+
+ return omap_hwmod_idle(cookie->data);
+}
+
+static int ti_sysc_shutdown_module(struct device *dev,
+ const struct ti_sysc_cookie *cookie)
+{
+ if (!cookie->data)
+ return -EINVAL;
+
+ return omap_hwmod_shutdown(cookie->data);
+}
+
+static struct of_dev_auxdata omap_auxdata_lookup[];
+
+static struct ti_sysc_platform_data ti_sysc_pdata = {
+ .auxdata = omap_auxdata_lookup,
+ .init_module = omap_hwmod_init_module,
+ .enable_module = ti_sysc_enable_module,
+ .idle_module = ti_sysc_idle_module,
+ .shutdown_module = ti_sysc_shutdown_module,
+};
+
static struct pcs_pdata pcs_pdata;
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
@@ -477,33 +514,6 @@ void omap_auxdata_legacy_init(struct device *dev)
dev->platform_data = &twl_gpio_auxdata;
}
-/* Dual mode timer PWM callbacks platdata */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
- .request_by_node = omap_dm_timer_request_by_node,
- .request_specific = omap_dm_timer_request_specific,
- .request = omap_dm_timer_request,
- .set_source = omap_dm_timer_set_source,
- .get_irq = omap_dm_timer_get_irq,
- .set_int_enable = omap_dm_timer_set_int_enable,
- .set_int_disable = omap_dm_timer_set_int_disable,
- .free = omap_dm_timer_free,
- .enable = omap_dm_timer_enable,
- .disable = omap_dm_timer_disable,
- .get_fclk = omap_dm_timer_get_fclk,
- .start = omap_dm_timer_start,
- .stop = omap_dm_timer_stop,
- .set_load = omap_dm_timer_set_load,
- .set_match = omap_dm_timer_set_match,
- .set_pwm = omap_dm_timer_set_pwm,
- .set_prescaler = omap_dm_timer_set_prescaler,
- .read_counter = omap_dm_timer_read_counter,
- .write_counter = omap_dm_timer_write_counter,
- .read_status = omap_dm_timer_read_status,
- .write_status = omap_dm_timer_write_status,
-};
-#endif
-
static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
};
@@ -542,7 +552,9 @@ static struct pdata_init auxdata_quirks[] __initdata = {
{ /* sentinel */ },
};
-static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+struct omap_sr_data __maybe_unused omap_sr_pdata[OMAP_SR_NR];
+
+static struct of_dev_auxdata omap_auxdata_lookup[] = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
@@ -551,6 +563,10 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
+ OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
+ "480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
+ OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,
+ "480c9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
@@ -572,14 +588,17 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
-#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
+ OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
+ "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
+ OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
+ "4a0dd000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
+ OF_DEV_AUXDATA("ti,omap4-smartreflex-mpu", 0x4a0d9000,
+ "4a0d9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
#endif
#ifdef CONFIG_SOC_DRA7XX
OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc",
@@ -590,6 +609,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
&dra7_hsmmc_data_mmc3),
#endif
/* Common auxdata */
+ OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
{ /* sentinel */ },
};
diff --git a/arch/arm/mach-omap2/pm-asm-offsets.c b/arch/arm/mach-omap2/pm-asm-offsets.c
new file mode 100644
index 000000000000..6d4392da7c11
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-asm-offsets.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI AM33XX and AM43XX PM Assembly Offsets
+ *
+ * Copyright (C) 2017-2018 Texas Instruments Inc.
+ */
+
+#include <linux/kbuild.h>
+#include <linux/platform_data/pm33xx.h>
+
+int main(void)
+{
+ DEFINE(AMX3_PM_WFI_FLAGS_OFFSET,
+ offsetof(struct am33xx_pm_sram_data, wfi_flags));
+ DEFINE(AMX3_PM_L2_AUX_CTRL_VAL_OFFSET,
+ offsetof(struct am33xx_pm_sram_data, l2_aux_ctrl_val));
+ DEFINE(AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET,
+ offsetof(struct am33xx_pm_sram_data, l2_prefetch_ctrl_val));
+ DEFINE(AMX3_PM_SRAM_DATA_SIZE, sizeof(struct am33xx_pm_sram_data));
+
+ BLANK();
+
+ DEFINE(AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET,
+ offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_virt));
+ DEFINE(AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET,
+ offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_phys));
+ DEFINE(AMX3_PM_RO_SRAM_DATA_SIZE,
+ sizeof(struct am33xx_pm_ro_sram_data));
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8e30772cfe32..c73776b82348 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -81,6 +81,9 @@ extern unsigned int omap3_do_wfi_sz;
/* ... and its pointer from SRAM after copy */
extern void (*omap3_do_wfi_sram)(void);
+extern struct am33xx_pm_sram_addr am33xx_pm_sram;
+extern struct am33xx_pm_sram_addr am43xx_pm_sram;
+
extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
new file mode 100644
index 000000000000..93c0b5ba9f09
--- /dev/null
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Arch Power Management Routines
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Dave Gerlach
+ */
+
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <linux/errno.h>
+#include <linux/platform_data/pm33xx.h>
+
+#include "cm33xx.h"
+#include "common.h"
+#include "control.h"
+#include "clockdomain.h"
+#include "iomap.h"
+#include "omap_hwmod.h"
+#include "pm.h"
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "soc.h"
+#include "sram.h"
+
+static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
+static struct clockdomain *gfx_l4ls_clkdm;
+static void __iomem *scu_base;
+
+static int __init am43xx_map_scu(void)
+{
+ scu_base = ioremap(scu_a9_get_base(), SZ_256);
+
+ if (!scu_base)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int amx3_common_init(void)
+{
+ gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
+ per_pwrdm = pwrdm_lookup("per_pwrdm");
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+
+ if ((!gfx_pwrdm) || (!per_pwrdm) || (!mpu_pwrdm))
+ return -ENODEV;
+
+ (void)clkdm_for_each(omap_pm_clkdms_setup, NULL);
+
+ /* CEFUSE domain can be turned off post bootup */
+ cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm");
+ if (cefuse_pwrdm)
+ omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
+ else
+ pr_err("PM: Failed to get cefuse_pwrdm\n");
+
+ return 0;
+}
+
+static int am33xx_suspend_init(void)
+{
+ int ret;
+
+ gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
+
+ if (!gfx_l4ls_clkdm) {
+ pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n");
+ return -ENODEV;
+ }
+
+ ret = amx3_common_init();
+
+ return ret;
+}
+
+static int am43xx_suspend_init(void)
+{
+ int ret = 0;
+
+ ret = am43xx_map_scu();
+ if (ret) {
+ pr_err("PM: Could not ioremap SCU\n");
+ return ret;
+ }
+
+ ret = amx3_common_init();
+
+ return ret;
+}
+
+static void amx3_pre_suspend_common(void)
+{
+ omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
+}
+
+static void amx3_post_suspend_common(void)
+{
+ int status;
+ /*
+ * Because gfx_pwrdm is the only one under MPU control,
+ * comment on transition status
+ */
+ status = pwrdm_read_pwrst(gfx_pwrdm);
+ if (status != PWRDM_POWER_OFF)
+ pr_err("PM: GFX domain did not transition: %x\n", status);
+}
+
+static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long))
+{
+ int ret = 0;
+
+ amx3_pre_suspend_common();
+ ret = cpu_suspend(0, fn);
+ amx3_post_suspend_common();
+
+ /*
+ * BUG: GFX_L4LS clock domain needs to be woken up to
+ * ensure thet L4LS clock domain does not get stuck in
+ * transition. If that happens L3 module does not get
+ * disabled, thereby leading to PER power domain
+ * transition failing
+ */
+
+ clkdm_wakeup(gfx_l4ls_clkdm);
+ clkdm_sleep(gfx_l4ls_clkdm);
+
+ return ret;
+}
+
+static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long))
+{
+ int ret = 0;
+
+ amx3_pre_suspend_common();
+ scu_power_mode(scu_base, SCU_PM_POWEROFF);
+ ret = cpu_suspend(0, fn);
+ scu_power_mode(scu_base, SCU_PM_NORMAL);
+ amx3_post_suspend_common();
+
+ return ret;
+}
+
+static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
+{
+ if (soc_is_am33xx())
+ return &am33xx_pm_sram;
+ else if (soc_is_am437x())
+ return &am43xx_pm_sram;
+ else
+ return NULL;
+}
+
+static struct am33xx_pm_platform_data am33xx_ops = {
+ .init = am33xx_suspend_init,
+ .soc_suspend = am33xx_suspend,
+ .get_sram_addrs = amx3_get_sram_addrs,
+};
+
+static struct am33xx_pm_platform_data am43xx_ops = {
+ .init = am43xx_suspend_init,
+ .soc_suspend = am43xx_suspend,
+ .get_sram_addrs = amx3_get_sram_addrs,
+};
+
+static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
+{
+ if (soc_is_am33xx())
+ return &am33xx_ops;
+ else if (soc_is_am437x())
+ return &am43xx_ops;
+ else
+ return NULL;
+}
+
+void __init amx3_common_pm_init(void)
+{
+ struct am33xx_pm_platform_data *pdata;
+ struct platform_device_info devinfo;
+
+ pdata = am33xx_pm_get_pdata();
+
+ memset(&devinfo, 0, sizeof(devinfo));
+ devinfo.name = "pm33xx";
+ devinfo.data = pdata;
+ devinfo.size_data = sizeof(*pdata);
+ devinfo.id = -1;
+ platform_device_register_full(&devinfo);
+}
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
new file mode 100644
index 000000000000..218d79930b04
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Low level suspend code for AM33XX SoCs
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Dave Gerlach, Vaibhav Bedia
+ */
+
+#include <generated/ti-emif-asm-offsets.h>
+#include <generated/ti-pm-asm-offsets.h>
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+#include "iomap.h"
+#include "cm33xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
+
+ .arm
+ .align 3
+
+ENTRY(am33xx_do_wfi)
+ stmfd sp!, {r4 - r11, lr} @ save registers on stack
+
+ /*
+ * Flush all data from the L1 and L2 data cache before disabling
+ * SCTLR.C bit.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+ /*
+ * Clear the SCTLR.C bit to prevent further data cache
+ * allocation. Clearing SCTLR.C would make all the data accesses
+ * strongly ordered and would not hit the cache.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #(1 << 2) @ Disable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ /*
+ * Invalidate L1 and L2 data cache.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+ adr r9, am33xx_emif_sram_table
+
+ ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+ blx r3
+
+ ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+ blx r3
+
+ /* Disable EMIF */
+ ldr r1, virt_emif_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+ ldr r1, virt_emif_clkctrl
+wait_emif_disable:
+ ldr r2, [r1]
+ mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+ cmp r2, r3
+ bne wait_emif_disable
+
+ /*
+ * For the MPU WFI to be registered as an interrupt
+ * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+ * to DISABLED
+ */
+ ldr r1, virt_mpu_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+ /*
+ * Execute an ISB instruction to ensure that all of the
+ * CP15 register changes have been committed.
+ */
+ isb
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * have completed.
+ */
+ dsb
+ dmb
+
+ /*
+ * Execute a WFI instruction and wait until the
+ * STANDBYWFI output is asserted to indicate that the
+ * CPU is in idle and low power state. CPU can specualatively
+ * prefetch the instructions so add NOPs after WFI. Thirteen
+ * NOPs as per Cortex-A8 pipeline.
+ */
+ wfi
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* We come here in case of an abort due to a late interrupt */
+
+ /* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+ ldr r1, virt_mpu_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+
+ /* Re-enable EMIF */
+ ldr r1, virt_emif_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+wait_emif_enable:
+ ldr r3, [r1]
+ cmp r2, r3
+ bne wait_emif_enable
+
+
+ ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+ blx r1
+
+ /*
+ * Set SCTLR.C bit to allow data cache allocation
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #(1 << 2) @ Enable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ /* Let the suspend code know about the abort */
+ mov r0, #1
+ ldmfd sp!, {r4 - r11, pc} @ restore regs and return
+ENDPROC(am33xx_do_wfi)
+
+ .align
+ENTRY(am33xx_resume_offset)
+ .word . - am33xx_do_wfi
+
+ENTRY(am33xx_resume_from_deep_sleep)
+ /* Re-enable EMIF */
+ ldr r0, phys_emif_clkctrl
+ mov r1, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r1, [r0]
+wait_emif_enable1:
+ ldr r2, [r0]
+ cmp r1, r2
+ bne wait_emif_enable1
+
+ adr r9, am33xx_emif_sram_table
+
+ ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+ blx r1
+
+ ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+ blx r1
+
+resume_to_ddr:
+ /* We are back. Branch to the common CPU resume routine */
+ mov r0, #0
+ ldr pc, resume_addr
+ENDPROC(am33xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+ .align
+resume_addr:
+ .word cpu_resume - PAGE_OFFSET + 0x80000000
+kernel_flush:
+ .word v7_flush_dcache_all
+virt_mpu_clkctrl:
+ .word AM33XX_CM_MPU_MPU_CLKCTRL
+virt_emif_clkctrl:
+ .word AM33XX_CM_PER_EMIF_CLKCTRL
+phys_emif_clkctrl:
+ .word (AM33XX_CM_BASE + AM33XX_CM_PER_MOD + \
+ AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+.align 3
+/* DDR related defines */
+am33xx_emif_sram_table:
+ .space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am33xx_pm_sram)
+ .word am33xx_do_wfi
+ .word am33xx_do_wfi_sz
+ .word am33xx_resume_offset
+ .word am33xx_emif_sram_table
+ .word am33xx_pm_ro_sram_data
+
+.align 3
+ENTRY(am33xx_pm_ro_sram_data)
+ .space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am33xx_do_wfi_sz)
+ .word . - am33xx_do_wfi
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
new file mode 100644
index 000000000000..b24be624e8b9
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -0,0 +1,391 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Low level suspend code for AM43XX SoCs
+ *
+ * Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Dave Gerlach, Vaibhav Bedia
+ */
+
+#include <generated/ti-emif-asm-offsets.h>
+#include <generated/ti-pm-asm-offsets.h>
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+
+#include <asm/assembler.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/memory.h>
+
+#include "cm33xx.h"
+#include "common.h"
+#include "iomap.h"
+#include "omap-secure.h"
+#include "omap44xx.h"
+#include "prm33xx.h"
+#include "prcm43xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
+
+#define AM43XX_EMIF_POWEROFF_ENABLE 0x1
+#define AM43XX_EMIF_POWEROFF_DISABLE 0x0
+
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP 0x1
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO 0x3
+
+#define AM43XX_CM_BASE 0x44DF0000
+
+#define AM43XX_CM_REGADDR(inst, reg) \
+ AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))
+
+#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+ AM43XX_CM_MPU_MPU_CDOFFS)
+#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+ AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
+#define AM43XX_CM_PER_EMIF_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
+ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030
+
+ .arm
+ .align 3
+
+ENTRY(am43xx_do_wfi)
+ stmfd sp!, {r4 - r11, lr} @ save registers on stack
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Retrieve l2 cache virt address BEFORE we shut off EMIF */
+ ldr r1, get_l2cache_base
+ blx r1
+ mov r8, r0
+#endif
+
+ /*
+ * Flush all data from the L1 and L2 data cache before disabling
+ * SCTLR.C bit.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+ /*
+ * Clear the SCTLR.C bit to prevent further data cache
+ * allocation. Clearing SCTLR.C would make all the data accesses
+ * strongly ordered and would not hit the cache.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #(1 << 2) @ Disable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+ dsb
+
+ /*
+ * Invalidate L1 and L2 data cache.
+ */
+ ldr r1, kernel_flush
+ blx r1
+
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Clean and invalidate the L2 cache.
+ */
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x03
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+ mov r0, r8
+ adr r4, am43xx_pm_ro_sram_data
+ ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
+
+ mov r2, r0
+ ldr r0, [r2, #L2X0_AUX_CTRL]
+ str r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+ ldr r0, [r2, #L310_PREFETCH_CTRL]
+ str r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+ ldr r0, l2_val
+ str r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+ ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
+ ldr r1, l2_val
+ ands r0, r0, r1
+ bne wait
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+l2x_sync:
+ mov r0, r8
+ mov r2, r0
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync
+#endif
+
+ adr r9, am43xx_emif_sram_table
+
+ ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+ blx r3
+
+ ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+ blx r3
+
+ /* Disable EMIF */
+ ldr r1, am43xx_virt_emif_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+wait_emif_disable:
+ ldr r2, [r1]
+ mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+ cmp r2, r3
+ bne wait_emif_disable
+
+ /*
+ * For the MPU WFI to be registered as an interrupt
+ * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+ * to DISABLED
+ */
+ ldr r1, am43xx_virt_mpu_clkctrl
+ ldr r2, [r1]
+ bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+ str r2, [r1]
+
+ /*
+ * Put MPU CLKDM to SW_SLEEP
+ */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
+ str r2, [r1]
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * have completed.
+ */
+ dsb
+ dmb
+
+ /*
+ * Execute a WFI instruction and wait until the
+ * STANDBYWFI output is asserted to indicate that the
+ * CPU is in idle and low power state. CPU can specualatively
+ * prefetch the instructions so add NOPs after WFI. Sixteen
+ * NOPs as per Cortex-A9 pipeline.
+ */
+ wfi
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* We come here in case of an abort due to a late interrupt */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+ str r2, [r1]
+
+ /* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+ ldr r1, am43xx_virt_mpu_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+
+ /* Re-enable EMIF */
+ ldr r1, am43xx_virt_emif_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+wait_emif_enable:
+ ldr r3, [r1]
+ cmp r2, r3
+ bne wait_emif_enable
+
+ /*
+ * Set SCTLR.C bit to allow data cache allocation
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #(1 << 2) @ Enable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+ blx r1
+
+ /* Let the suspend code know about the abort */
+ mov r0, #1
+ ldmfd sp!, {r4 - r11, pc} @ restore regs and return
+ENDPROC(am43xx_do_wfi)
+
+ .align
+ENTRY(am43xx_resume_offset)
+ .word . - am43xx_do_wfi
+
+ENTRY(am43xx_resume_from_deep_sleep)
+ /* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
+ ldr r1, am43xx_virt_mpu_clkstctrl
+ mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+ str r2, [r1]
+
+ /* For AM43xx, use EMIF power down until context is restored */
+ ldr r2, am43xx_phys_emif_poweroff
+ mov r1, #AM43XX_EMIF_POWEROFF_ENABLE
+ str r1, [r2, #0x0]
+
+ /* Re-enable EMIF */
+ ldr r1, am43xx_phys_emif_clkctrl
+ mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+ str r2, [r1]
+wait_emif_enable1:
+ ldr r3, [r1]
+ cmp r2, r3
+ bne wait_emif_enable1
+
+ adr r9, am43xx_emif_sram_table
+
+ ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+ blx r1
+
+ ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+ blx r1
+
+ ldr r2, am43xx_phys_emif_poweroff
+ mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
+ str r1, [r2, #0x0]
+
+#ifdef CONFIG_CACHE_L2X0
+ ldr r2, l2_cache_base
+ ldr r0, [r2, #L2X0_CTRL]
+ and r0, #0x0f
+ cmp r0, #1
+ beq skip_l2en @ Skip if already enabled
+
+ adr r4, am43xx_pm_ro_sram_data
+ ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
+ ldr r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+ ldr r12, l2_smc1
+ dsb
+ smc #0
+ dsb
+set_aux_ctrl:
+ ldr r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+ ldr r12, l2_smc2
+ dsb
+ smc #0
+ dsb
+
+ /* L2 invalidate on resume */
+ ldr r0, l2_val
+ ldr r2, l2_cache_base
+ str r0, [r2, #L2X0_INV_WAY]
+wait2:
+ ldr r0, [r2, #L2X0_INV_WAY]
+ ldr r1, l2_val
+ ands r0, r0, r1
+ bne wait2
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ dsb
+ smc #0
+ dsb
+#endif
+l2x_sync2:
+ ldr r2, l2_cache_base
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync2:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync2
+
+ mov r0, #0x1
+ ldr r12, l2_smc3
+ dsb
+ smc #0
+ dsb
+#endif
+skip_l2en:
+ /* We are back. Branch to the common CPU resume routine */
+ mov r0, #0
+ ldr pc, resume_addr
+ENDPROC(am43xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+ .align
+resume_addr:
+ .word cpu_resume - PAGE_OFFSET + 0x80000000
+kernel_flush:
+ .word v7_flush_dcache_all
+ddr_start:
+ .word PAGE_OFFSET
+
+am43xx_phys_emif_poweroff:
+ .word (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
+ AM43XX_PRM_EMIF_CTRL_OFFSET)
+am43xx_virt_mpu_clkstctrl:
+ .word (AM43XX_CM_MPU_CLKSTCTRL)
+am43xx_virt_mpu_clkctrl:
+ .word (AM43XX_CM_MPU_MPU_CLKCTRL)
+am43xx_virt_emif_clkctrl:
+ .word (AM43XX_CM_PER_EMIF_CLKCTRL)
+am43xx_phys_emif_clkctrl:
+ .word (AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
+ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+#ifdef CONFIG_CACHE_L2X0
+/* L2 cache related defines for AM437x */
+get_l2cache_base:
+ .word omap4_get_l2cache_base
+l2_cache_base:
+ .word OMAP44XX_L2CACHE_BASE
+l2_smc1:
+ .word OMAP4_MON_L2X0_PREFETCH_INDEX
+l2_smc2:
+ .word OMAP4_MON_L2X0_AUXCTRL_INDEX
+l2_smc3:
+ .word OMAP4_MON_L2X0_CTRL_INDEX
+l2_val:
+ .word 0xffff
+#endif
+
+.align 3
+/* DDR related defines */
+ENTRY(am43xx_emif_sram_table)
+ .space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am43xx_pm_sram)
+ .word am43xx_do_wfi
+ .word am43xx_do_wfi_sz
+ .word am43xx_resume_offset
+ .word am43xx_emif_sram_table
+ .word am43xx_pm_ro_sram_data
+
+.align 3
+
+ENTRY(am43xx_pm_ro_sram_data)
+ .space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am43xx_do_wfi_sz)
+ .word . - am43xx_do_wfi
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 56dfa2d5d0a8..0cae3b070208 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -90,12 +90,7 @@ skip_secure_l1_clean:
mcr p15, 0, r0, c1, c0, 0
isb
- /*
- * Invalidate L1 data cache. Even though only invalidate is
- * necessary exported flush API is used here. Doing clean
- * on already clean cache would be almost NOP.
- */
- bl v7_flush_dcache_all
+ bl v7_invalidate_l1
/*
* Switch the CPU from Symmetric Multiprocessing (SMP) mode
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index eef6935e0403..0854ed9ff379 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -89,18 +89,27 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
sr_data->nvalue_count = j;
}
+extern struct omap_sr_data omap_sr_pdata[];
+
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
- struct omap_sr_data *sr_data;
- struct platform_device *pdev;
+ struct omap_sr_data *sr_data = NULL;
struct omap_volt_data *volt_data;
struct omap_smartreflex_dev_attr *sr_dev_attr;
- char *name = "smartreflex";
static int i;
- sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL);
- if (!sr_data)
- return -ENOMEM;
+ if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
+ !strncmp(oh->name, "smartreflex_mpu", 16))
+ sr_data = &omap_sr_pdata[OMAP_SR_MPU];
+ else if (!strncmp(oh->name, "smartreflex_core", 17))
+ sr_data = &omap_sr_pdata[OMAP_SR_CORE];
+ else if (!strncmp(oh->name, "smartreflex_iva", 16))
+ sr_data = &omap_sr_pdata[OMAP_SR_IVA];
+
+ if (!sr_data) {
+ pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+ return -EINVAL;
+ }
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
@@ -145,13 +154,9 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->enable_on_init = sr_enable_on_init;
- pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
- if (IS_ERR(pdev))
- pr_warn("%s: Could not build omap_device for %s: %s\n",
- __func__, name, oh->name);
exit:
i++;
- kfree(sr_data);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index d61fbd7a2840..4fb4dc24e5e9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -49,7 +49,7 @@
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
#include "omap-pm.h"
#include "soc.h"
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 69d7f48a4183..c5c0ab8ac9f9 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -404,7 +404,7 @@ static void __init cm_x300_init_ac97(void)
static inline void cm_x300_init_ac97(void) {}
#endif
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
static struct mtd_partition cm_x300_nand_partitions[] = {
[0] = {
.name = "OBM",
@@ -442,11 +442,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
- .enable_arbiter = 1,
.keep_config = 1,
- .num_cs = 1,
- .parts[0] = cm_x300_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
+ .parts = cm_x300_nand_partitions,
+ .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
};
static void __init cm_x300_init_nand(void)
@@ -522,7 +520,7 @@ static int cm_x300_ulpi_phy_reset(void)
return 0;
}
-static inline int cm_x300_u2d_init(struct device *dev)
+static int cm_x300_u2d_init(struct device *dev)
{
int err = 0;
@@ -534,7 +532,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
pr_err("failed to get CLK_POUT: %d\n", err);
return err;
}
- clk_enable(pout_clk);
+ clk_prepare_enable(pout_clk);
err = cm_x300_ulpi_phy_reset();
if (err) {
@@ -549,7 +547,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
static void cm_x300_u2d_exit(struct device *dev)
{
if (cpu_is_pxa310()) {
- clk_disable(pout_clk);
+ clk_disable_unprepare(pout_clk);
clk_put(pout_clk);
}
}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index b04431bb4ba7..e31a591e949f 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -110,7 +110,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
}
#endif
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
static struct mtd_partition colibri_nand_partitions[] = {
{
.name = "bootloader",
@@ -138,11 +138,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data colibri_nand_info = {
- .enable_arbiter = 1,
.keep_config = 1,
- .num_cs = 1,
- .parts[0] = colibri_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions),
+ .parts = colibri_nand_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
};
void __init colibri_pxa3xx_init_nand(void)
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
index 673a131da875..85525d49e321 100644
--- a/arch/arm/mach-pxa/colibri.h
+++ b/arch/arm/mach-pxa/colibri.h
@@ -46,7 +46,7 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
extern void colibri_pxa3xx_init_nand(void);
#else
static inline void colibri_pxa3xx_init_nand(void) {}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 4105614cc38e..9e132b3e48c6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -291,7 +291,7 @@ static void __init littleton_init_mmc(void)
static inline void littleton_init_mmc(void) {}
#endif
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
.name = "Bootloader",
@@ -329,10 +329,8 @@ static struct mtd_partition littleton_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data littleton_nand_info = {
- .enable_arbiter = 1,
- .num_cs = 1,
- .parts[0] = littleton_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions),
+ .parts = littleton_nand_partitions,
+ .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
@@ -341,7 +339,7 @@ static void __init littleton_init_nand(void)
}
#else
static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct led_info littleton_da9034_leds[] = {
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index f9e3d41a4609..616b22397d73 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -359,7 +359,7 @@ void __init mxm_8x10_ac97_init(void)
}
/* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
#define NAND_BLOCK_SIZE SZ_128K
#define NB(x) (NAND_BLOCK_SIZE * (x))
static struct mtd_partition mxm_8x10_nand_partitions[] = {
@@ -389,11 +389,9 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
- .enable_arbiter = 1,
.keep_config = 1,
- .num_cs = 1,
- .parts[0] = mxm_8x10_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions)
+ .parts = mxm_8x10_nand_partitions,
+ .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
};
static void __init mxm_8x10_nand_init(void)
@@ -402,7 +400,7 @@ static void __init mxm_8x10_nand_init(void)
}
#else
static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
/* Ethernet support: Davicom DM9000 */
static struct resource dm9k_resources[] = {
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 60cb59a7ebd1..b3e2016f24b1 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -256,7 +256,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host)
if (!u2d)
return 0;
- clk_enable(u2d->clk);
+ clk_prepare_enable(u2d->clk);
if (cpu_is_pxa310()) {
pxa310_u2d_setup_otg_hc();
@@ -276,7 +276,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host)
if (cpu_is_pxa310())
pxa310_stop_otg_hc();
- clk_disable(u2d->clk);
+ clk_disable_unprepare(u2d->clk);
}
EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
@@ -331,7 +331,7 @@ static int pxa3xx_u2d_probe(struct platform_device *pdev)
goto err_free_plat;
}
- platform_set_drvdata(pdev, &u2d);
+ platform_set_drvdata(pdev, u2d);
return 0;
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index e7ac7dcb95e9..034345546f84 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -346,11 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
- .enable_arbiter = 1,
.keep_config = 1,
- .num_cs = 1,
- .parts[0] = raumfeld_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions),
+ .parts = raumfeld_nand_partitions,
+ .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
};
/**
@@ -378,9 +376,9 @@ static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
};
static const struct property_entry raumfeld_rotary_properties[] __initconst = {
- PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
- PROPERTY_ENTRY_INTEGER("linux,axis", u32, REL_X),
- PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 1),
+ PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+ PROPERTY_ENTRY_U32("linux,axis", REL_X),
+ PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1),
{ },
};
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4268552d600d..d69de312d8d9 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -338,7 +338,7 @@ static void __init zylonite_init_keypad(void)
static inline void zylonite_init_keypad(void) {}
#endif
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
static struct mtd_partition zylonite_nand_partitions[] = {
[0] = {
.name = "Bootloader",
@@ -376,10 +376,8 @@ static struct mtd_partition zylonite_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data zylonite_nand_info = {
- .enable_arbiter = 1,
- .num_cs = 1,
- .parts[0] = zylonite_nand_partitions,
- .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions),
+ .parts = zylonite_nand_partitions,
+ .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
};
static void __init zylonite_init_nand(void)
@@ -388,7 +386,7 @@ static void __init zylonite_init_nand(void)
}
#else
static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static struct pxaohci_platform_data zylonite_ohci_info = {
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index ecec340ca345..51984a40b097 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -208,6 +208,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
}
static const struct regmap_config rockchip_pmu_regmap_config = {
+ .name = "rockchip-pmu",
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index a8fa4f7e1f60..43c1ac696274 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -7,6 +7,10 @@ extern void shmobile_init_delay(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_size;
+extern void shmobile_boot_vector_gen2(void);
+extern unsigned long shmobile_boot_fn_gen2;
+extern unsigned long shmobile_boot_cpu_gen2;
+extern unsigned long shmobile_boot_size_gen2;
extern void shmobile_smp_boot(void);
extern void shmobile_smp_sleep(void);
extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 32e0bf6e3ccb..cef8e8c555f8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,11 @@
#include <asm/assembler.h>
#include <asm/memory.h>
+#define SCTLR_MMU 0x01
+#define BOOTROM_ADDRESS 0xE6340000
+#define RWTCSRA_ADDRESS 0xE6020004
+#define RWTCSRA_WOVF 0x10
+
/*
* Reset vector for secondary CPUs.
* This will be mapped at address 0 by SBAR register.
@@ -37,6 +42,56 @@ shmobile_boot_fn:
shmobile_boot_size:
.long . - shmobile_boot_vector
+#ifdef CONFIG_ARCH_RCAR_GEN2
+/*
+ * Reset vector for R-Car Gen2 and RZ/G1 secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ */
+ENTRY(shmobile_boot_vector_gen2)
+ mrc p15, 0, r0, c0, c0, 5 @ r0 = MPIDR
+ ldr r1, shmobile_boot_cpu_gen2
+ cmp r0, r1
+ bne shmobile_smp_continue_gen2
+
+ mrc p15, 0, r1, c1, c0, 0 @ r1 = SCTLR
+ and r0, r1, #SCTLR_MMU
+ cmp r0, #SCTLR_MMU
+ beq shmobile_smp_continue_gen2
+
+ ldr r0, rwtcsra
+ mov r1, #0
+ ldrb r1, [r0]
+ and r0, r1, #RWTCSRA_WOVF
+ cmp r0, #RWTCSRA_WOVF
+ bne shmobile_smp_continue_gen2
+
+ ldr r0, bootrom
+ bx r0
+
+shmobile_smp_continue_gen2:
+ ldr r1, shmobile_boot_fn_gen2
+ bx r1
+
+ENDPROC(shmobile_boot_vector_gen2)
+
+ .align 4
+rwtcsra:
+ .word RWTCSRA_ADDRESS
+bootrom:
+ .word BOOTROM_ADDRESS
+ .globl shmobile_boot_cpu_gen2
+shmobile_boot_cpu_gen2:
+ .word 0x00000000
+
+ .align 2
+ .globl shmobile_boot_fn_gen2
+shmobile_boot_fn_gen2:
+ .space 4
+ .globl shmobile_boot_size_gen2
+shmobile_boot_size_gen2:
+ .long . - shmobile_boot_vector_gen2
+#endif /* CONFIG_ARCH_RCAR_GEN2 */
+
/*
* Per-CPU SMP boot function/argument selection code based on MPIDR
*/
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4422b615a6ee..ba732effc90b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -191,6 +191,7 @@ static void __init shmobile_smp_apmu_setup_boot(void)
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = __pa_symbol(shmobile_smp_boot);
+ shmobile_boot_fn_gen2 = shmobile_boot_fn;
}
void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index e5f215c8b218..5a798b406af0 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -17,6 +17,7 @@
#include <linux/smp.h>
#include <linux/soc/renesas/rcar-sysc.h>
#include <asm/io.h>
+#include <asm/cputype.h>
#include "common.h"
#include "rcar-gen2.h"
@@ -37,7 +38,6 @@
#define CA7RESCNT_CODE 0x5a5a0000
#define CA7RESCNT_CPUS 0xf /* CPU0-3 */
-
/* On-chip RAM */
#define ICRAM1 0xe63c0000 /* Inter Connect RAM1 (4 KiB) */
@@ -119,8 +119,17 @@ map:
p = ioremap(res.start, resource_size(&res));
if (!p)
return;
-
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ /*
+ * install the reset vector, use the largest version if we have enough
+ * memory available
+ */
+ if (resource_size(&res) >= shmobile_boot_size_gen2) {
+ shmobile_boot_cpu_gen2 = read_cpuid_mpidr();
+ memcpy_toio(p, shmobile_boot_vector_gen2,
+ shmobile_boot_size_gen2);
+ } else {
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ }
iounmap(p);
/* setup reset vectors */
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..93f628acfd94 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
/*
* R-Car Generation 2 da9063/da9210 regulator quirk
*
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators. Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * Certain Gen2 development boards have an da9063 and one or more da9210
+ * regulators. All of these regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
*
* After cold boot or da9063-induced restart, both the da9063 and da9210 seem
* to assert their interrupt request lines. Hence as soon as one driver
@@ -50,7 +50,7 @@ static void __iomem *irqc;
static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
-static struct i2c_msg da9xxx_msgs[2] = {
+static struct i2c_msg da9xxx_msgs[3] = {
{
.addr = 0x58,
.len = ARRAY_SIZE(da9063_irq_clr),
@@ -59,6 +59,10 @@ static struct i2c_msg da9xxx_msgs[2] = {
.addr = 0x68,
.len = ARRAY_SIZE(da9210_irq_clr),
.buf = da9210_irq_clr,
+ }, {
+ .addr = 0x70,
+ .len = ARRAY_SIZE(da9210_irq_clr),
+ .buf = da9210_irq_clr,
},
};
@@ -85,12 +89,16 @@ static int regulator_quirk_notify(struct notifier_block *nb,
dev_dbg(dev, "Detected %s\n", client->name);
if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
- (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
- int ret;
+ (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
+ (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
+ int ret, len;
+
+ /* There are two DA9210 on Stout, one on the other boards. */
+ len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
- ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
- if (ret != ARRAY_SIZE(da9xxx_msgs))
+ ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
+ if (ret != len)
dev_err(&client->dev, "i2c error %d\n", ret);
}
@@ -118,6 +126,7 @@ static int __init rcar_gen2_regulator_quirk(void)
if (!of_machine_is_compatible("renesas,koelsch") &&
!of_machine_is_compatible("renesas,lager") &&
+ !of_machine_is_compatible("renesas,stout") &&
!of_machine_is_compatible("renesas,gose"))
return -ENODEV;
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index c378ab0c2431..d4866788702c 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -116,7 +116,6 @@ static int socfpga_pm_suspend(unsigned long arg)
static int socfpga_pm_enter(suspend_state_t state)
{
switch (state) {
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
outer_disable();
cpu_suspend(0, socfpga_pm_suspend);
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 0d1889bbde58..713c068b953f 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,8 +1,10 @@
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
+menuconfig ARCH_STM32
+ bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
+ select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+ select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
+ select ARM_GIC if ARCH_MULTI_V7
+ select ARM_PSCI if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
@@ -10,22 +12,42 @@ config ARCH_STM32
help
Support for STMicroelectronics STM32 processors.
+if ARCH_STM32
+
+if ARM_SINGLE_ARMV7M
+
config MACH_STM32F429
- bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F429"
+ select ARM_AMBA
default y
config MACH_STM32F469
- bool "STMicrolectronics STM32F469"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F469"
+ select ARM_AMBA
default y
config MACH_STM32F746
- bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32F746"
+ select ARM_AMBA
+ default y
+
+config MACH_STM32F769
+ bool "STMicroelectronics STM32F769"
+ select ARM_AMBA
default y
config MACH_STM32H743
- bool "STMicrolectronics STM32H743"
- depends on ARCH_STM32
+ bool "STMicroelectronics STM32H743"
+ default y
+
+endif # ARMv7-M
+
+if ARCH_MULTI_V7
+
+config MACH_STM32MP157
+ bool "STMicroelectronics STM32MP157"
default y
+
+endif # ARMv7-A
+
+endif
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index e918686e4191..011d57b488c2 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -1,22 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) Maxime Coquelin 2015
+ * Copyright (C) STMicroelectronics 2017
* Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
- * License terms: GNU General Public License (GPL), version 2
*/
#include <linux/kernel.h>
-#include <asm/v7m.h>
#include <asm/mach/arch.h>
+#ifdef CONFIG_ARM_SINGLE_ARMV7M
+#include <asm/v7m.h>
+#endif
static const char *const stm32_compat[] __initconst = {
"st,stm32f429",
"st,stm32f469",
"st,stm32f746",
+ "st,stm32f769",
"st,stm32h743",
+ "st,stm32mp157",
NULL
};
DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)")
.dt_compat = stm32_compat,
+#ifdef CONFIG_ARM_SINGLE_ARMV7M
.restart = armv7m_restart,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 58153cdf025b..ce53ceaf4cc5 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -48,4 +48,11 @@ config MACH_SUN9I
default ARCH_SUNXI
select ARM_GIC
+config ARCH_SUNXI_MC_SMP
+ bool
+ depends on SMP
+ default MACH_SUN9I
+ select ARM_CCI400_PORT_CTRL
+ select ARM_CPU_SUSPEND
+
endif
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 27b168f121a1..7de9cc286d53 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,5 @@
+CFLAGS_mc_smp.o += -march=armv7-a
+
obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
+obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o
obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
new file mode 100644
index 000000000000..c0246ec54a0a
--- /dev/null
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * arch/arm/mach-sunxi/mc_smp.c
+ *
+ * Based on Allwinner code, arch/arm/mach-exynos/mcpm-exynos.c, and
+ * arch/arm/mach-hisi/platmcpm.c
+ * Cluster cache enable trampoline code adapted from MCPM framework
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+#include <asm/idmap.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+#define SUNXI_CPUS_PER_CLUSTER 4
+#define SUNXI_NR_CLUSTERS 2
+
+#define POLL_USEC 100
+#define TIMEOUT_USEC 100000
+
+#define CPUCFG_CX_CTRL_REG0(c) (0x10 * (c))
+#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(n) BIT(n)
+#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL 0xf
+#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7 BIT(4)
+#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15 BIT(0)
+#define CPUCFG_CX_CTRL_REG1(c) (0x10 * (c) + 0x4)
+#define CPUCFG_CX_CTRL_REG1_ACINACTM BIT(0)
+#define CPUCFG_CX_STATUS(c) (0x30 + 0x4 * (c))
+#define CPUCFG_CX_STATUS_STANDBYWFI(n) BIT(16 + (n))
+#define CPUCFG_CX_STATUS_STANDBYWFIL2 BIT(0)
+#define CPUCFG_CX_RST_CTRL(c) (0x80 + 0x4 * (c))
+#define CPUCFG_CX_RST_CTRL_DBG_SOC_RST BIT(24)
+#define CPUCFG_CX_RST_CTRL_ETM_RST(n) BIT(20 + (n))
+#define CPUCFG_CX_RST_CTRL_ETM_RST_ALL (0xf << 20)
+#define CPUCFG_CX_RST_CTRL_DBG_RST(n) BIT(16 + (n))
+#define CPUCFG_CX_RST_CTRL_DBG_RST_ALL (0xf << 16)
+#define CPUCFG_CX_RST_CTRL_H_RST BIT(12)
+#define CPUCFG_CX_RST_CTRL_L2_RST BIT(8)
+#define CPUCFG_CX_RST_CTRL_CX_RST(n) BIT(4 + (n))
+#define CPUCFG_CX_RST_CTRL_CORE_RST(n) BIT(n)
+
+#define PRCM_CPU_PO_RST_CTRL(c) (0x4 + 0x4 * (c))
+#define PRCM_CPU_PO_RST_CTRL_CORE(n) BIT(n)
+#define PRCM_CPU_PO_RST_CTRL_CORE_ALL 0xf
+#define PRCM_PWROFF_GATING_REG(c) (0x100 + 0x4 * (c))
+#define PRCM_PWROFF_GATING_REG_CLUSTER BIT(4)
+#define PRCM_PWROFF_GATING_REG_CORE(n) BIT(n)
+#define PRCM_PWR_SWITCH_REG(c, cpu) (0x140 + 0x10 * (c) + 0x4 * (cpu))
+#define PRCM_CPU_SOFT_ENTRY_REG 0x164
+
+#define CPU0_SUPPORT_HOTPLUG_MAGIC0 0xFA50392F
+#define CPU0_SUPPORT_HOTPLUG_MAGIC1 0x790DCA3A
+
+static void __iomem *cpucfg_base;
+static void __iomem *prcm_base;
+static void __iomem *sram_b_smp_base;
+
+static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster)
+{
+ struct device_node *node;
+ int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core;
+
+ node = of_cpu_device_node_get(cpu);
+
+ /* In case of_cpu_device_node_get fails */
+ if (!node)
+ node = of_get_cpu_node(cpu, NULL);
+
+ if (!node) {
+ /*
+ * There's no point in returning an error, since we
+ * would be mid way in a core or cluster power sequence.
+ */
+ pr_err("%s: Couldn't get CPU cluster %u core %u device node\n",
+ __func__, cluster, core);
+
+ return false;
+ }
+
+ return of_device_is_compatible(node, "arm,cortex-a15");
+}
+
+static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster,
+ bool enable)
+{
+ u32 reg;
+
+ /* control sequence from Allwinner A80 user manual v1.2 PRCM section */
+ reg = readl(prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ if (enable) {
+ if (reg == 0x00) {
+ pr_debug("power clamp for cluster %u cpu %u already open\n",
+ cluster, cpu);
+ return 0;
+ }
+
+ writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ writel(0xfe, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ writel(0xf8, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ writel(0xf0, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ writel(0x00, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ } else {
+ writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+ udelay(10);
+ }
+
+ return 0;
+}
+
+static void sunxi_cpu0_hotplug_support_set(bool enable)
+{
+ if (enable) {
+ writel(CPU0_SUPPORT_HOTPLUG_MAGIC0, sram_b_smp_base);
+ writel(CPU0_SUPPORT_HOTPLUG_MAGIC1, sram_b_smp_base + 0x4);
+ } else {
+ writel(0x0, sram_b_smp_base);
+ writel(0x0, sram_b_smp_base + 0x4);
+ }
+}
+
+static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
+{
+ u32 reg;
+
+ pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+ if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
+ return -EINVAL;
+
+ /* Set hotplug support magic flags for cpu0 */
+ if (cluster == 0 && cpu == 0)
+ sunxi_cpu0_hotplug_support_set(true);
+
+ /* assert processor power-on reset */
+ reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu);
+ writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+ /* Cortex-A7: hold L1 reset disable signal low */
+ if (!sunxi_core_is_cortex_a15(cpu, cluster)) {
+ reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+ reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(cpu);
+ writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+ }
+
+ /* assert processor related resets */
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
+
+ /*
+ * Allwinner code also asserts resets for NEON on A15. According
+ * to ARM manuals, asserting power-on reset is sufficient.
+ */
+ if (!sunxi_core_is_cortex_a15(cpu, cluster))
+ reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST(cpu);
+
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+ /* open power switch */
+ sunxi_cpu_power_switch_set(cpu, cluster, true);
+
+ /* clear processor power gate */
+ reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu);
+ writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ udelay(20);
+
+ /* de-assert processor power-on reset */
+ reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu);
+ writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+ /* de-assert all processor resets */
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
+ reg |= CPUCFG_CX_RST_CTRL_CORE_RST(cpu);
+ if (!sunxi_core_is_cortex_a15(cpu, cluster))
+ reg |= CPUCFG_CX_RST_CTRL_ETM_RST(cpu);
+ else
+ reg |= CPUCFG_CX_RST_CTRL_CX_RST(cpu); /* NEON */
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+ return 0;
+}
+
+static int sunxi_cluster_powerup(unsigned int cluster)
+{
+ u32 reg;
+
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ if (cluster >= SUNXI_NR_CLUSTERS)
+ return -EINVAL;
+
+ /* assert ACINACTM */
+ reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+ reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
+ writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+
+ /* assert cluster processor power-on resets */
+ reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL;
+ writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+ /* assert cluster resets */
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+ reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST_ALL;
+ reg &= ~CPUCFG_CX_RST_CTRL_H_RST;
+ reg &= ~CPUCFG_CX_RST_CTRL_L2_RST;
+
+ /*
+ * Allwinner code also asserts resets for NEON on A15. According
+ * to ARM manuals, asserting power-on reset is sufficient.
+ */
+ if (!sunxi_core_is_cortex_a15(0, cluster))
+ reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST_ALL;
+
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+ /* hold L1/L2 reset disable signals low */
+ reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+ if (sunxi_core_is_cortex_a15(0, cluster)) {
+ /* Cortex-A15: hold L2RSTDISABLE low */
+ reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15;
+ } else {
+ /* Cortex-A7: hold L1RSTDISABLE and L2RSTDISABLE low */
+ reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL;
+ reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7;
+ }
+ writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+
+ /* clear cluster power gate */
+ reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER;
+ writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ udelay(20);
+
+ /* de-assert cluster resets */
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg |= CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+ reg |= CPUCFG_CX_RST_CTRL_H_RST;
+ reg |= CPUCFG_CX_RST_CTRL_L2_RST;
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+ /* de-assert ACINACTM */
+ reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+ reg &= ~CPUCFG_CX_CTRL_REG1_ACINACTM;
+ writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+
+ return 0;
+}
+
+/*
+ * This bit is shared between the initial nocache_trampoline call to
+ * enable CCI-400 and proper cluster cache disable before power down.
+ */
+static void sunxi_cluster_cache_disable_without_axi(void)
+{
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
+ /*
+ * On the Cortex-A15 we need to disable
+ * L2 prefetching before flushing the cache.
+ */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3\n"
+ "isb\n"
+ "dsb"
+ : : "r" (0x400));
+ }
+
+ /* Flush all cache levels for this cluster. */
+ v7_exit_coherency_flush(all);
+
+ /*
+ * Disable cluster-level coherency by masking
+ * incoming snoops and DVM messages:
+ */
+ cci_disable_port_by_cpu(read_cpuid_mpidr());
+}
+
+static int sunxi_mc_smp_cpu_table[SUNXI_NR_CLUSTERS][SUNXI_CPUS_PER_CLUSTER];
+static int sunxi_mc_smp_first_comer;
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ *
+ * Also enable regional clock gating and L2 data latency settings for
+ * Cortex-A15. These settings are from the vendor kernel.
+ */
+static void __naked sunxi_mc_smp_cluster_cache_enable(void)
+{
+ asm volatile (
+ "mrc p15, 0, r1, c0, c0, 0\n"
+ "movw r2, #" __stringify(ARM_CPU_PART_MASK & 0xffff) "\n"
+ "movt r2, #" __stringify(ARM_CPU_PART_MASK >> 16) "\n"
+ "and r1, r1, r2\n"
+ "movw r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 & 0xffff) "\n"
+ "movt r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 >> 16) "\n"
+ "cmp r1, r2\n"
+ "bne not_a15\n"
+
+ /* The following is Cortex-A15 specific */
+
+ /* ACTLR2: Enable CPU regional clock gates */
+ "mrc p15, 1, r1, c15, c0, 4\n"
+ "orr r1, r1, #(0x1<<31)\n"
+ "mcr p15, 1, r1, c15, c0, 4\n"
+
+ /* L2ACTLR */
+ "mrc p15, 1, r1, c15, c0, 0\n"
+ /* Enable L2, GIC, and Timer regional clock gates */
+ "orr r1, r1, #(0x1<<26)\n"
+ /* Disable clean/evict from being pushed to external */
+ "orr r1, r1, #(0x1<<3)\n"
+ "mcr p15, 1, r1, c15, c0, 0\n"
+
+ /* L2CTRL: L2 data RAM latency */
+ "mrc p15, 1, r1, c9, c0, 2\n"
+ "bic r1, r1, #(0x7<<0)\n"
+ "orr r1, r1, #(0x3<<0)\n"
+ "mcr p15, 1, r1, c9, c0, 2\n"
+
+ /* End of Cortex-A15 specific setup */
+ "not_a15:\n"
+
+ /* Get value of sunxi_mc_smp_first_comer */
+ "adr r1, first\n"
+ "ldr r0, [r1]\n"
+ "ldr r0, [r1, r0]\n"
+
+ /* Skip cci_enable_port_for_self if not first comer */
+ "cmp r0, #0\n"
+ "bxeq lr\n"
+ "b cci_enable_port_for_self\n"
+
+ ".align 2\n"
+ "first: .word sunxi_mc_smp_first_comer - .\n"
+ );
+}
+
+static void __naked sunxi_mc_smp_secondary_startup(void)
+{
+ asm volatile(
+ "bl sunxi_mc_smp_cluster_cache_enable\n"
+ "b secondary_startup"
+ /* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
+ :: "i" (sunxi_mc_smp_cluster_cache_enable)
+ );
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static bool sunxi_mc_smp_cluster_is_down(unsigned int cluster)
+{
+ int i;
+
+ for (i = 0; i < SUNXI_CPUS_PER_CLUSTER; i++)
+ if (sunxi_mc_smp_cpu_table[cluster][i])
+ return false;
+ return true;
+}
+
+static void sunxi_mc_smp_secondary_init(unsigned int cpu)
+{
+ /* Clear hotplug support magic flags for cpu0 */
+ if (cpu == 0)
+ sunxi_cpu0_hotplug_support_set(false);
+}
+
+static int sunxi_mc_smp_boot_secondary(unsigned int l_cpu, struct task_struct *idle)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = cpu_logical_map(l_cpu);
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ if (!cpucfg_base)
+ return -ENODEV;
+ if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER)
+ return -EINVAL;
+
+ spin_lock_irq(&boot_lock);
+
+ if (sunxi_mc_smp_cpu_table[cluster][cpu])
+ goto out;
+
+ if (sunxi_mc_smp_cluster_is_down(cluster)) {
+ sunxi_mc_smp_first_comer = true;
+ sunxi_cluster_powerup(cluster);
+ } else {
+ sunxi_mc_smp_first_comer = false;
+ }
+
+ /* This is read by incoming CPUs with their cache and MMU disabled */
+ sync_cache_w(&sunxi_mc_smp_first_comer);
+ sunxi_cpu_powerup(cpu, cluster);
+
+out:
+ sunxi_mc_smp_cpu_table[cluster][cpu]++;
+ spin_unlock_irq(&boot_lock);
+
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void sunxi_cluster_cache_disable(void)
+{
+ unsigned int cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+ u32 reg;
+
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+
+ sunxi_cluster_cache_disable_without_axi();
+
+ /* last man standing, assert ACINACTM */
+ reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+ reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
+ writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+}
+
+static void sunxi_mc_smp_cpu_die(unsigned int l_cpu)
+{
+ unsigned int mpidr, cpu, cluster;
+ bool last_man;
+
+ mpidr = cpu_logical_map(l_cpu);
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+
+ spin_lock(&boot_lock);
+ sunxi_mc_smp_cpu_table[cluster][cpu]--;
+ if (sunxi_mc_smp_cpu_table[cluster][cpu] == 1) {
+ /* A power_up request went ahead of us. */
+ pr_debug("%s: aborting due to a power up request\n",
+ __func__);
+ spin_unlock(&boot_lock);
+ return;
+ } else if (sunxi_mc_smp_cpu_table[cluster][cpu] > 1) {
+ pr_err("Cluster %d CPU%d boots multiple times\n",
+ cluster, cpu);
+ BUG();
+ }
+
+ last_man = sunxi_mc_smp_cluster_is_down(cluster);
+ spin_unlock(&boot_lock);
+
+ gic_cpu_if_down(0);
+ if (last_man)
+ sunxi_cluster_cache_disable();
+ else
+ v7_exit_coherency_flush(louis);
+
+ for (;;)
+ wfi();
+}
+
+static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
+{
+ u32 reg;
+
+ pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+ if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
+ return -EINVAL;
+
+ /* gate processor power */
+ reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+ writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ udelay(20);
+
+ /* close power switch */
+ sunxi_cpu_power_switch_set(cpu, cluster, false);
+
+ return 0;
+}
+
+static int sunxi_cluster_powerdown(unsigned int cluster)
+{
+ u32 reg;
+
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ if (cluster >= SUNXI_NR_CLUSTERS)
+ return -EINVAL;
+
+ /* assert cluster resets or system will hang */
+ pr_debug("%s: assert cluster reset\n", __func__);
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+ reg &= ~CPUCFG_CX_RST_CTRL_H_RST;
+ reg &= ~CPUCFG_CX_RST_CTRL_L2_RST;
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+ /* gate cluster power */
+ pr_debug("%s: gate cluster power\n", __func__);
+ reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ reg |= PRCM_PWROFF_GATING_REG_CLUSTER;
+ writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+ udelay(20);
+
+ return 0;
+}
+
+static int sunxi_mc_smp_cpu_kill(unsigned int l_cpu)
+{
+ unsigned int mpidr, cpu, cluster;
+ unsigned int tries, count;
+ int ret = 0;
+ u32 reg;
+
+ mpidr = cpu_logical_map(l_cpu);
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ /* This should never happen */
+ if (WARN_ON(cluster >= SUNXI_NR_CLUSTERS ||
+ cpu >= SUNXI_CPUS_PER_CLUSTER))
+ return 0;
+
+ /* wait for CPU core to die and enter WFI */
+ count = TIMEOUT_USEC / POLL_USEC;
+ spin_lock_irq(&boot_lock);
+ for (tries = 0; tries < count; tries++) {
+ spin_unlock_irq(&boot_lock);
+ usleep_range(POLL_USEC / 2, POLL_USEC);
+ spin_lock_irq(&boot_lock);
+
+ /*
+ * If the user turns off a bunch of cores at the same
+ * time, the kernel might call cpu_kill before some of
+ * them are ready. This is because boot_lock serializes
+ * both cpu_die and cpu_kill callbacks. Either one could
+ * run first. We should wait for cpu_die to complete.
+ */
+ if (sunxi_mc_smp_cpu_table[cluster][cpu])
+ continue;
+
+ reg = readl(cpucfg_base + CPUCFG_CX_STATUS(cluster));
+ if (reg & CPUCFG_CX_STATUS_STANDBYWFI(cpu))
+ break;
+ }
+
+ if (tries >= count) {
+ ret = ETIMEDOUT;
+ goto out;
+ }
+
+ /* power down CPU core */
+ sunxi_cpu_powerdown(cpu, cluster);
+
+ if (!sunxi_mc_smp_cluster_is_down(cluster))
+ goto out;
+
+ /* wait for cluster L2 WFI */
+ ret = readl_poll_timeout(cpucfg_base + CPUCFG_CX_STATUS(cluster), reg,
+ reg & CPUCFG_CX_STATUS_STANDBYWFIL2,
+ POLL_USEC, TIMEOUT_USEC);
+ if (ret) {
+ /*
+ * Ignore timeout on the cluster. Leaving the cluster on
+ * will not affect system execution, just use a bit more
+ * power. But returning an error here will only confuse
+ * the user as the CPU has already been shutdown.
+ */
+ ret = 0;
+ goto out;
+ }
+
+ /* Power down cluster */
+ sunxi_cluster_powerdown(cluster);
+
+out:
+ spin_unlock_irq(&boot_lock);
+ pr_debug("%s: cluster %u cpu %u powerdown: %d\n",
+ __func__, cluster, cpu, ret);
+ return !ret;
+}
+
+static bool sunxi_mc_smp_cpu_can_disable(unsigned int __unused)
+{
+ return true;
+}
+#endif
+
+static const struct smp_operations sunxi_mc_smp_smp_ops __initconst = {
+ .smp_secondary_init = sunxi_mc_smp_secondary_init,
+ .smp_boot_secondary = sunxi_mc_smp_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = sunxi_mc_smp_cpu_die,
+ .cpu_kill = sunxi_mc_smp_cpu_kill,
+ .cpu_can_disable = sunxi_mc_smp_cpu_can_disable,
+#endif
+};
+
+static bool __init sunxi_mc_smp_cpu_table_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER) {
+ pr_err("%s: boot CPU is out of bounds!\n", __func__);
+ return false;
+ }
+ sunxi_mc_smp_cpu_table[cluster][cpu] = 1;
+ return true;
+}
+
+/*
+ * Adapted from arch/arm/common/mc_smp_entry.c
+ *
+ * We need the trampoline code to enable CCI-400 on the first cluster
+ */
+typedef typeof(cpu_reset) phys_reset_t;
+
+static void __init __naked sunxi_mc_smp_resume(void)
+{
+ asm volatile(
+ "bl sunxi_mc_smp_cluster_cache_enable\n"
+ "b cpu_resume"
+ /* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
+ :: "i" (sunxi_mc_smp_cluster_cache_enable)
+ );
+}
+
+static int __init nocache_trampoline(unsigned long __unused)
+{
+ phys_reset_t phys_reset;
+
+ setup_mm_for_reboot();
+ sunxi_cluster_cache_disable_without_axi();
+
+ phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
+ phys_reset(__pa_symbol(sunxi_mc_smp_resume), false);
+ BUG();
+}
+
+static int __init sunxi_mc_smp_loopback(void)
+{
+ int ret;
+
+ /*
+ * We're going to soft-restart the current CPU through the
+ * low-level MCPM code by leveraging the suspend/resume
+ * infrastructure. Let's play it safe by using cpu_pm_enter()
+ * in case the CPU init code path resets the VFP or similar.
+ */
+ sunxi_mc_smp_first_comer = true;
+ local_irq_disable();
+ local_fiq_disable();
+ ret = cpu_pm_enter();
+ if (!ret) {
+ ret = cpu_suspend(0, nocache_trampoline);
+ cpu_pm_exit();
+ }
+ local_fiq_enable();
+ local_irq_enable();
+ sunxi_mc_smp_first_comer = false;
+
+ return ret;
+}
+
+/*
+ * This holds any device nodes that we requested resources for,
+ * so that we may easily release resources in the error path.
+ */
+struct sunxi_mc_smp_nodes {
+ struct device_node *prcm_node;
+ struct device_node *cpucfg_node;
+ struct device_node *sram_node;
+};
+
+/* This structure holds SoC-specific bits tied to an enable-method string. */
+struct sunxi_mc_smp_data {
+ const char *enable_method;
+ int (*get_smp_nodes)(struct sunxi_mc_smp_nodes *nodes);
+};
+
+static void __init sunxi_mc_smp_put_nodes(struct sunxi_mc_smp_nodes *nodes)
+{
+ of_node_put(nodes->prcm_node);
+ of_node_put(nodes->cpucfg_node);
+ of_node_put(nodes->sram_node);
+ memset(nodes, 0, sizeof(*nodes));
+}
+
+static int __init sun9i_a80_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes)
+{
+ nodes->prcm_node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun9i-a80-prcm");
+ if (!nodes->prcm_node) {
+ pr_err("%s: PRCM not available\n", __func__);
+ return -ENODEV;
+ }
+
+ nodes->cpucfg_node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun9i-a80-cpucfg");
+ if (!nodes->cpucfg_node) {
+ pr_err("%s: CPUCFG not available\n", __func__);
+ return -ENODEV;
+ }
+
+ nodes->sram_node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun9i-a80-smp-sram");
+ if (!nodes->sram_node) {
+ pr_err("%s: Secure SRAM not available\n", __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct sunxi_mc_smp_data sunxi_mc_smp_data[] __initconst = {
+ {
+ .enable_method = "allwinner,sun9i-a80-smp",
+ .get_smp_nodes = sun9i_a80_get_smp_nodes,
+ },
+};
+
+static int __init sunxi_mc_smp_init(void)
+{
+ struct sunxi_mc_smp_nodes nodes = { 0 };
+ struct device_node *node;
+ struct resource res;
+ int i, ret;
+
+ /*
+ * Don't bother checking the "cpus" node, as an enable-method
+ * property in that node is undocumented.
+ */
+ node = of_cpu_device_node_get(0);
+ if (!node)
+ return -ENODEV;
+
+ /*
+ * We can't actually use the enable-method magic in the kernel.
+ * Our loopback / trampoline code uses the CPU suspend framework,
+ * which requires the identity mapping be available. It would not
+ * yet be available if we used the .init_cpus or .prepare_cpus
+ * callbacks in smp_operations, which we would use if we were to
+ * use CPU_METHOD_OF_DECLARE
+ */
+ for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) {
+ ret = of_property_match_string(node, "enable-method",
+ sunxi_mc_smp_data[i].enable_method);
+ if (!ret)
+ break;
+ }
+
+ of_node_put(node);
+ if (ret)
+ return -ENODEV;
+
+ if (!sunxi_mc_smp_cpu_table_init())
+ return -EINVAL;
+
+ if (!cci_probed()) {
+ pr_err("%s: CCI-400 not available\n", __func__);
+ return -ENODEV;
+ }
+
+ /* Get needed device tree nodes */
+ ret = sunxi_mc_smp_data[i].get_smp_nodes(&nodes);
+ if (ret)
+ goto err_put_nodes;
+
+ /*
+ * Unfortunately we can not request the I/O region for the PRCM.
+ * It is shared with the PRCM clock.
+ */
+ prcm_base = of_iomap(nodes.prcm_node, 0);
+ if (!prcm_base) {
+ pr_err("%s: failed to map PRCM registers\n", __func__);
+ ret = -ENOMEM;
+ goto err_put_nodes;
+ }
+
+ cpucfg_base = of_io_request_and_map(nodes.cpucfg_node, 0,
+ "sunxi-mc-smp");
+ if (IS_ERR(cpucfg_base)) {
+ ret = PTR_ERR(cpucfg_base);
+ pr_err("%s: failed to map CPUCFG registers: %d\n",
+ __func__, ret);
+ goto err_unmap_prcm;
+ }
+
+ sram_b_smp_base = of_io_request_and_map(nodes.sram_node, 0,
+ "sunxi-mc-smp");
+ if (IS_ERR(sram_b_smp_base)) {
+ ret = PTR_ERR(sram_b_smp_base);
+ pr_err("%s: failed to map secure SRAM\n", __func__);
+ goto err_unmap_release_cpucfg;
+ }
+
+ /* Configure CCI-400 for boot cluster */
+ ret = sunxi_mc_smp_loopback();
+ if (ret) {
+ pr_err("%s: failed to configure boot cluster: %d\n",
+ __func__, ret);
+ goto err_unmap_release_secure_sram;
+ }
+
+ /* We don't need the device nodes anymore */
+ sunxi_mc_smp_put_nodes(&nodes);
+
+ /* Set the hardware entry point address */
+ writel(__pa_symbol(sunxi_mc_smp_secondary_startup),
+ prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+
+ /* Actually enable multi cluster SMP */
+ smp_set_ops(&sunxi_mc_smp_smp_ops);
+
+ pr_info("sunxi multi cluster SMP support installed\n");
+
+ return 0;
+
+err_unmap_release_secure_sram:
+ iounmap(sram_b_smp_base);
+ of_address_to_resource(nodes.sram_node, 0, &res);
+ release_mem_region(res.start, resource_size(&res));
+err_unmap_release_cpucfg:
+ iounmap(cpucfg_base);
+ of_address_to_resource(nodes.cpucfg_node, 0, &res);
+ release_mem_region(res.start, resource_size(&res));
+err_unmap_prcm:
+ iounmap(prcm_base);
+err_put_nodes:
+ sunxi_mc_smp_put_nodes(&nodes);
+ return ret;
+}
+
+early_initcall(sunxi_mc_smp_init);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7276afee30b3..afc1a1d4f7a5 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
help
PPA routine service ID for setting L2 auxiliary control register.
-config OMAP_DM_TIMER
- bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
- help
- Select this option if you want to use OMAP Dual-Mode timers.
-
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 47e186729d44..7215ada707e4 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 634b373785c4..ecf613761e78 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -31,7 +31,6 @@ CONFIG_PROFILING=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_BCM2835=y
@@ -51,11 +50,14 @@ CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
@@ -99,10 +101,19 @@ CONFIG_HIBERNATION=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPUFREQ_DT=y
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA186_CPUFREQ=y
CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_NET=y
CONFIG_PACKET=y
@@ -209,7 +220,14 @@ CONFIG_QCOM_EMAC=m
CONFIG_RAVB=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
+CONFIG_SNI_AVE=y
+CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_AT803X_PHY=m
CONFIG_MARVELL_PHY=m
@@ -305,6 +323,7 @@ CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_UNIPHIER=y
@@ -327,7 +346,10 @@ CONFIG_THERMAL_EMULATION=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
+CONFIG_QCOM_TSENS=y
CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
@@ -444,12 +466,14 @@ CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USB3=m
CONFIG_USB_ULPI_BUS=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
@@ -500,6 +524,7 @@ CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VIRTIO_PCI=y
@@ -525,7 +550,9 @@ CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
CONFIG_QCOM_IOMMU=y
@@ -539,7 +566,10 @@ CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_EXTCON_USB_GPIO=y
+CONFIG_MEMORY=y
+CONFIG_TEGRA_MC=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_ROCKCHIP_SARADC=m
@@ -547,10 +577,12 @@ CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_MESON=m
+CONFIG_PWM_RCAR=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_TEGRA=m
CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_SUN4I_USB=y
@@ -562,6 +594,8 @@ CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
+CONFIG_MESON_EFUSE=m
+CONFIG_QCOM_QFPROM=y
CONFIG_UNIPHIER_EFUSE=y
CONFIG_TEE=y
CONFIG_OPTEE=y
@@ -629,3 +663,6 @@ CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index cdaeeea7999c..7cd2fd04b212 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -13,22 +13,20 @@
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
+
#include <linux/platform_data/ti-sysc.h>
#include <dt-bindings/bus/ti-sysc.h>
-enum sysc_registers {
- SYSC_REVISION,
- SYSC_SYSCONFIG,
- SYSC_SYSSTATUS,
- SYSC_MAX_REGS,
-};
-
static const char * const reg_names[] = { "rev", "sysc", "syss", };
enum sysc_clocks {
@@ -55,6 +53,7 @@ static const char * const clock_names[] = { "fck", "ick", };
* @cfg: interconnect target module configuration
* @name: name if available
* @revision: interconnect target module revision
+ * @needs_resume: runtime resume needed on resume from suspend
*/
struct sysc {
struct device *dev;
@@ -66,8 +65,13 @@ struct sysc {
const char *legacy_mode;
const struct sysc_capabilities *cap;
struct sysc_config cfg;
+ struct ti_sysc_cookie cookie;
const char *name;
u32 revision;
+ bool enabled;
+ bool needs_resume;
+ bool child_needs_resume;
+ struct delayed_work idle_work;
};
static u32 sysc_read(struct sysc *ddata, int offset)
@@ -136,9 +140,6 @@ static int sysc_get_clocks(struct sysc *ddata)
{
int i, error;
- if (ddata->legacy_mode)
- return 0;
-
for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
error = sysc_get_one_clock(ddata, i);
if (error && error != -ENOENT)
@@ -197,12 +198,53 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
ddata->module_pa = of_translate_address(np, ranges++);
ddata->module_size = be32_to_cpup(ranges);
- dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
- ddata->module_pa, ddata->module_size, np);
-
return 0;
}
+static struct device_node *stdout_path;
+
+static void sysc_init_stdout_path(struct sysc *ddata)
+{
+ struct device_node *np = NULL;
+ const char *uart;
+
+ if (IS_ERR(stdout_path))
+ return;
+
+ if (stdout_path)
+ return;
+
+ np = of_find_node_by_path("/chosen");
+ if (!np)
+ goto err;
+
+ uart = of_get_property(np, "stdout-path", NULL);
+ if (!uart)
+ goto err;
+
+ np = of_find_node_by_path(uart);
+ if (!np)
+ goto err;
+
+ stdout_path = np;
+
+ return;
+
+err:
+ stdout_path = ERR_PTR(-ENODEV);
+}
+
+static void sysc_check_quirk_stdout(struct sysc *ddata,
+ struct device_node *np)
+{
+ sysc_init_stdout_path(ddata);
+ if (np != stdout_path)
+ return;
+
+ ddata->cfg.quirks |= SYSC_QUIRK_NO_IDLE_ON_INIT |
+ SYSC_QUIRK_NO_RESET_ON_INIT;
+}
+
/**
* sysc_check_one_child - check child configuration
* @ddata: device driver data
@@ -221,6 +263,8 @@ static int sysc_check_one_child(struct sysc *ddata,
if (name)
dev_warn(ddata->dev, "really a child ti,hwmods property?");
+ sysc_check_quirk_stdout(ddata, np);
+
return 0;
}
@@ -246,11 +290,8 @@ static int sysc_check_children(struct sysc *ddata)
*/
static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res)
{
- if (resource_size(res) == 8) {
- dev_dbg(ddata->dev,
- "enabling 16-bit and clockactivity quirks\n");
+ if (resource_size(res) == 8)
ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT;
- }
}
/**
@@ -276,7 +317,6 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
res = platform_get_resource_byname(to_platform_device(ddata->dev),
IORESOURCE_MEM, name);
if (!res) {
- dev_dbg(ddata->dev, "has no %s register\n", name);
ddata->offsets[reg] = -ENODEV;
return 0;
@@ -437,6 +477,14 @@ static int sysc_show_reg(struct sysc *ddata,
return sprintf(bufp, ":%x", ddata->offsets[reg]);
}
+static int sysc_show_name(char *bufp, struct sysc *ddata)
+{
+ if (!ddata->name)
+ return 0;
+
+ return sprintf(bufp, ":%s", ddata->name);
+}
+
/**
* sysc_show_registers - show information about interconnect target module
* @ddata: device driver data
@@ -451,6 +499,7 @@ static void sysc_show_registers(struct sysc *ddata)
bufp += sysc_show_reg(ddata, bufp, i);
bufp += sysc_show_rev(bufp, ddata);
+ bufp += sysc_show_name(bufp, ddata);
dev_dbg(ddata->dev, "%llx:%x%s\n",
ddata->module_pa, ddata->module_size,
@@ -459,33 +508,70 @@ static void sysc_show_registers(struct sysc *ddata)
static int __maybe_unused sysc_runtime_suspend(struct device *dev)
{
+ struct ti_sysc_platform_data *pdata;
struct sysc *ddata;
- int i;
+ int error = 0, i;
ddata = dev_get_drvdata(dev);
- if (ddata->legacy_mode)
+ if (!ddata->enabled)
return 0;
+ if (ddata->legacy_mode) {
+ pdata = dev_get_platdata(ddata->dev);
+ if (!pdata)
+ return 0;
+
+ if (!pdata->idle_module)
+ return -ENODEV;
+
+ error = pdata->idle_module(dev, &ddata->cookie);
+ if (error)
+ dev_err(dev, "%s: could not idle: %i\n",
+ __func__, error);
+
+ goto idled;
+ }
+
for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
if (IS_ERR_OR_NULL(ddata->clocks[i]))
continue;
clk_disable(ddata->clocks[i]);
}
- return 0;
+idled:
+ ddata->enabled = false;
+
+ return error;
}
static int __maybe_unused sysc_runtime_resume(struct device *dev)
{
+ struct ti_sysc_platform_data *pdata;
struct sysc *ddata;
- int i, error;
+ int error = 0, i;
ddata = dev_get_drvdata(dev);
- if (ddata->legacy_mode)
+ if (ddata->enabled)
return 0;
+ if (ddata->legacy_mode) {
+ pdata = dev_get_platdata(ddata->dev);
+ if (!pdata)
+ return 0;
+
+ if (!pdata->enable_module)
+ return -ENODEV;
+
+ error = pdata->enable_module(dev, &ddata->cookie);
+ if (error)
+ dev_err(dev, "%s: could not enable: %i\n",
+ __func__, error);
+
+ goto awake;
+ }
+
for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
if (IS_ERR_OR_NULL(ddata->clocks[i]))
continue;
@@ -494,20 +580,136 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
return error;
}
+awake:
+ ddata->enabled = true;
+
+ return error;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sysc_suspend(struct device *dev)
+{
+ struct sysc *ddata;
+
+ ddata = dev_get_drvdata(dev);
+
+ if (!ddata->enabled)
+ return 0;
+
+ ddata->needs_resume = true;
+
+ return sysc_runtime_suspend(dev);
+}
+
+static int sysc_resume(struct device *dev)
+{
+ struct sysc *ddata;
+
+ ddata = dev_get_drvdata(dev);
+ if (ddata->needs_resume) {
+ ddata->needs_resume = false;
+
+ return sysc_runtime_resume(dev);
+ }
+
return 0;
}
+#endif
static const struct dev_pm_ops sysc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sysc_suspend, sysc_resume)
SET_RUNTIME_PM_OPS(sysc_runtime_suspend,
sysc_runtime_resume,
NULL)
};
+/* Module revision register based quirks */
+struct sysc_revision_quirk {
+ const char *name;
+ u32 base;
+ int rev_offset;
+ int sysc_offset;
+ int syss_offset;
+ u32 revision;
+ u32 revision_mask;
+ u32 quirks;
+};
+
+#define SYSC_QUIRK(optname, optbase, optrev, optsysc, optsyss, \
+ optrev_val, optrevmask, optquirkmask) \
+ { \
+ .name = (optname), \
+ .base = (optbase), \
+ .rev_offset = (optrev), \
+ .sysc_offset = (optsysc), \
+ .syss_offset = (optsyss), \
+ .revision = (optrev_val), \
+ .revision_mask = (optrevmask), \
+ .quirks = (optquirkmask), \
+ }
+
+static const struct sysc_revision_quirk sysc_revision_quirks[] = {
+ /* These drivers need to be fixed to not use pm_runtime_irq_safe() */
+ SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000030, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("sham", 0, 0x100, 0x110, 0x114, 0x40000c03, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("smartreflex", 0, -1, 0x24, -1, 0x00000000, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
+ SYSC_QUIRK_LEGACY_IDLE),
+};
+
+static void sysc_init_revision_quirks(struct sysc *ddata)
+{
+ const struct sysc_revision_quirk *q;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sysc_revision_quirks); i++) {
+ q = &sysc_revision_quirks[i];
+
+ if (q->base && q->base != ddata->module_pa)
+ continue;
+
+ if (q->rev_offset >= 0 &&
+ q->rev_offset != ddata->offsets[SYSC_REVISION])
+ continue;
+
+ if (q->sysc_offset >= 0 &&
+ q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
+ continue;
+
+ if (q->syss_offset >= 0 &&
+ q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
+ continue;
+
+ if (q->revision == ddata->revision ||
+ (q->revision & q->revision_mask) ==
+ (ddata->revision & q->revision_mask)) {
+ ddata->name = q->name;
+ ddata->cfg.quirks |= q->quirks;
+ }
+ }
+}
+
/* At this point the module is configured enough to read the revision */
static int sysc_init_module(struct sysc *ddata)
{
int error;
+ if (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE_ON_INIT) {
+ ddata->revision = sysc_read_revision(ddata);
+ goto rev_quirks;
+ }
+
error = pm_runtime_get_sync(ddata->dev);
if (error < 0) {
pm_runtime_put_noidle(ddata->dev);
@@ -517,6 +719,9 @@ static int sysc_init_module(struct sysc *ddata)
ddata->revision = sysc_read_revision(ddata);
pm_runtime_put_sync(ddata->dev);
+rev_quirks:
+ sysc_init_revision_quirks(ddata);
+
return 0;
}
@@ -605,6 +810,196 @@ static int sysc_init_syss_mask(struct sysc *ddata)
return 0;
}
+/*
+ * Many child device drivers need to have fck available to get the clock
+ * rate for device internal configuration.
+ */
+static int sysc_child_add_fck(struct sysc *ddata,
+ struct device *child)
+{
+ struct clk *fck;
+ struct clk_lookup *l;
+ const char *name = clock_names[SYSC_FCK];
+
+ if (IS_ERR_OR_NULL(ddata->clocks[SYSC_FCK]))
+ return 0;
+
+ fck = clk_get(child, name);
+ if (!IS_ERR(fck)) {
+ clk_put(fck);
+
+ return -EEXIST;
+ }
+
+ l = clkdev_create(ddata->clocks[SYSC_FCK], name, dev_name(child));
+
+ return l ? 0 : -ENODEV;
+}
+
+static struct device_type sysc_device_type = {
+};
+
+static struct sysc *sysc_child_to_parent(struct device *dev)
+{
+ struct device *parent = dev->parent;
+
+ if (!parent || parent->type != &sysc_device_type)
+ return NULL;
+
+ return dev_get_drvdata(parent);
+}
+
+static int __maybe_unused sysc_child_runtime_suspend(struct device *dev)
+{
+ struct sysc *ddata;
+ int error;
+
+ ddata = sysc_child_to_parent(dev);
+
+ error = pm_generic_runtime_suspend(dev);
+ if (error)
+ return error;
+
+ if (!ddata->enabled)
+ return 0;
+
+ return sysc_runtime_suspend(ddata->dev);
+}
+
+static int __maybe_unused sysc_child_runtime_resume(struct device *dev)
+{
+ struct sysc *ddata;
+ int error;
+
+ ddata = sysc_child_to_parent(dev);
+
+ if (!ddata->enabled) {
+ error = sysc_runtime_resume(ddata->dev);
+ if (error < 0)
+ dev_err(ddata->dev,
+ "%s error: %i\n", __func__, error);
+ }
+
+ return pm_generic_runtime_resume(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sysc_child_suspend_noirq(struct device *dev)
+{
+ struct sysc *ddata;
+ int error;
+
+ ddata = sysc_child_to_parent(dev);
+
+ error = pm_generic_suspend_noirq(dev);
+ if (error)
+ return error;
+
+ if (!pm_runtime_status_suspended(dev)) {
+ error = pm_generic_runtime_suspend(dev);
+ if (error)
+ return error;
+
+ error = sysc_runtime_suspend(ddata->dev);
+ if (error)
+ return error;
+
+ ddata->child_needs_resume = true;
+ }
+
+ return 0;
+}
+
+static int sysc_child_resume_noirq(struct device *dev)
+{
+ struct sysc *ddata;
+ int error;
+
+ ddata = sysc_child_to_parent(dev);
+
+ if (ddata->child_needs_resume) {
+ ddata->child_needs_resume = false;
+
+ error = sysc_runtime_resume(ddata->dev);
+ if (error)
+ dev_err(ddata->dev,
+ "%s runtime resume error: %i\n",
+ __func__, error);
+
+ error = pm_generic_runtime_resume(dev);
+ if (error)
+ dev_err(ddata->dev,
+ "%s generic runtime resume: %i\n",
+ __func__, error);
+ }
+
+ return pm_generic_resume_noirq(dev);
+}
+#endif
+
+struct dev_pm_domain sysc_child_pm_domain = {
+ .ops = {
+ SET_RUNTIME_PM_OPS(sysc_child_runtime_suspend,
+ sysc_child_runtime_resume,
+ NULL)
+ USE_PLATFORM_PM_SLEEP_OPS
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sysc_child_suspend_noirq,
+ sysc_child_resume_noirq)
+ }
+};
+
+/**
+ * sysc_legacy_idle_quirk - handle children in omap_device compatible way
+ * @ddata: device driver data
+ * @child: child device driver
+ *
+ * Allow idle for child devices as done with _od_runtime_suspend().
+ * Otherwise many child devices will not idle because of the permanent
+ * parent usecount set in pm_runtime_irq_safe().
+ *
+ * Note that the long term solution is to just modify the child device
+ * drivers to not set pm_runtime_irq_safe() and then this can be just
+ * dropped.
+ */
+static void sysc_legacy_idle_quirk(struct sysc *ddata, struct device *child)
+{
+ if (!ddata->legacy_mode)
+ return;
+
+ if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
+ dev_pm_domain_set(child, &sysc_child_pm_domain);
+}
+
+static int sysc_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *device)
+{
+ struct device *dev = device;
+ struct sysc *ddata;
+ int error;
+
+ ddata = sysc_child_to_parent(dev);
+ if (!ddata)
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ error = sysc_child_add_fck(ddata, dev);
+ if (error && error != -EEXIST)
+ dev_warn(ddata->dev, "could not add %s fck: %i\n",
+ dev_name(dev), error);
+ sysc_legacy_idle_quirk(ddata, dev);
+ break;
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block sysc_nb = {
+ .notifier_call = sysc_notifier_call,
+};
+
/* Device tree configured quirks */
struct sysc_dts_quirk {
const char *name;
@@ -797,7 +1192,8 @@ static const struct sysc_capabilities sysc_34xx_sr = {
.type = TI_SYSC_OMAP34XX_SR,
.sysc_mask = SYSC_OMAP2_CLOCKACTIVITY,
.regbits = &sysc_regbits_omap34xx_sr,
- .mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED,
+ .mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED |
+ SYSC_QUIRK_LEGACY_IDLE,
};
/*
@@ -818,12 +1214,13 @@ static const struct sysc_capabilities sysc_36xx_sr = {
.type = TI_SYSC_OMAP36XX_SR,
.sysc_mask = SYSC_OMAP3_SR_ENAWAKEUP,
.regbits = &sysc_regbits_omap36xx_sr,
- .mod_quirks = SYSC_QUIRK_UNCACHED,
+ .mod_quirks = SYSC_QUIRK_UNCACHED | SYSC_QUIRK_LEGACY_IDLE,
};
static const struct sysc_capabilities sysc_omap4_sr = {
.type = TI_SYSC_OMAP4_SR,
.regbits = &sysc_regbits_omap36xx_sr,
+ .mod_quirks = SYSC_QUIRK_LEGACY_IDLE,
};
/*
@@ -865,6 +1262,33 @@ static const struct sysc_capabilities sysc_omap4_usb_host_fs = {
.regbits = &sysc_regbits_omap4_usb_host_fs,
};
+static int sysc_init_pdata(struct sysc *ddata)
+{
+ struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
+ struct ti_sysc_module_data mdata;
+ int error = 0;
+
+ if (!pdata || !ddata->legacy_mode)
+ return 0;
+
+ mdata.name = ddata->legacy_mode;
+ mdata.module_pa = ddata->module_pa;
+ mdata.module_size = ddata->module_size;
+ mdata.offsets = ddata->offsets;
+ mdata.nr_offsets = SYSC_MAX_REGS;
+ mdata.cap = ddata->cap;
+ mdata.cfg = &ddata->cfg;
+
+ if (!pdata->init_module)
+ return -ENODEV;
+
+ error = pdata->init_module(ddata->dev, &mdata, &ddata->cookie);
+ if (error == -EEXIST)
+ error = 0;
+
+ return error;
+}
+
static int sysc_init_match(struct sysc *ddata)
{
const struct sysc_capabilities *cap;
@@ -880,8 +1304,19 @@ static int sysc_init_match(struct sysc *ddata)
return 0;
}
+static void ti_sysc_idle(struct work_struct *work)
+{
+ struct sysc *ddata;
+
+ ddata = container_of(work, struct sysc, idle_work.work);
+
+ if (pm_runtime_active(ddata->dev))
+ pm_runtime_put_sync(ddata->dev);
+}
+
static int sysc_probe(struct platform_device *pdev)
{
+ struct ti_sysc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct sysc *ddata;
int error;
@@ -920,6 +1355,10 @@ static int sysc_probe(struct platform_device *pdev)
if (error)
goto unprepare;
+ error = sysc_init_pdata(ddata);
+ if (error)
+ goto unprepare;
+
pm_runtime_enable(ddata->dev);
error = sysc_init_module(ddata);
@@ -933,22 +1372,28 @@ static int sysc_probe(struct platform_device *pdev)
goto unprepare;
}
- pm_runtime_use_autosuspend(ddata->dev);
-
sysc_show_registers(ddata);
+ ddata->dev->type = &sysc_device_type;
error = of_platform_populate(ddata->dev->of_node,
- NULL, NULL, ddata->dev);
+ NULL, pdata ? pdata->auxdata : NULL,
+ ddata->dev);
if (error)
goto err;
- pm_runtime_mark_last_busy(ddata->dev);
- pm_runtime_put_autosuspend(ddata->dev);
+ INIT_DELAYED_WORK(&ddata->idle_work, ti_sysc_idle);
+
+ /* At least earlycon won't survive without deferred idle */
+ if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE_ON_INIT |
+ SYSC_QUIRK_NO_RESET_ON_INIT)) {
+ schedule_delayed_work(&ddata->idle_work, 3000);
+ } else {
+ pm_runtime_put(&pdev->dev);
+ }
return 0;
err:
- pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
unprepare:
@@ -962,6 +1407,8 @@ static int sysc_remove(struct platform_device *pdev)
struct sysc *ddata = platform_get_drvdata(pdev);
int error;
+ cancel_delayed_work_sync(&ddata->idle_work);
+
error = pm_runtime_get_sync(ddata->dev);
if (error < 0) {
pm_runtime_put_noidle(ddata->dev);
@@ -971,7 +1418,6 @@ static int sysc_remove(struct platform_device *pdev)
of_platform_depopulate(&pdev->dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -1008,7 +1454,21 @@ static struct platform_driver sysc_driver = {
.pm = &sysc_pm_ops,
},
};
-module_platform_driver(sysc_driver);
+
+static int __init sysc_init(void)
+{
+ bus_register_notifier(&platform_bus_type, &sysc_nb);
+
+ return platform_driver_register(&sysc_driver);
+}
+module_init(sysc_init);
+
+static void __exit sysc_exit(void)
+{
+ bus_unregister_notifier(&platform_bus_type, &sysc_nb);
+ platform_driver_unregister(&sysc_driver);
+}
+module_exit(sysc_exit);
MODULE_DESCRIPTION("TI sysc interconnect target driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6021a5af21da..9ee2888275c1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -21,6 +21,9 @@ config CLKEVT_I8253
config I8253_LOCK
bool
+config OMAP_DM_TIMER
+ bool
+
config CLKBLD_I8253
def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f0cb07637a65..e8e76dfef00b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
+obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/timer-ti-dm.c
index 8805a59bae53..4cce6b224b87 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -47,7 +47,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
@@ -163,6 +163,86 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
return ret;
}
+static int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+{
+ int ret;
+ const char *parent_name;
+ struct clk *parent;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer) || IS_ERR(timer->fclk))
+ return -EINVAL;
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "timer_sys_ck";
+ break;
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "timer_32k_ck";
+ break;
+ case OMAP_TIMER_SRC_EXT_CLK:
+ parent_name = "timer_ext_ck";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ pdata = timer->pdev->dev.platform_data;
+
+ /*
+ * FIXME: Used for OMAP1 devices only because they do not currently
+ * use the clock framework to set the parent clock. To be removed
+ * once OMAP1 migrated to using clock framework for dmtimers
+ */
+ if (pdata && pdata->set_timer_src)
+ return pdata->set_timer_src(timer->pdev, source);
+
+#if defined(CONFIG_COMMON_CLK)
+ /* Check if the clock has configurable parents */
+ if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+ return 0;
+#endif
+
+ parent = clk_get(&timer->pdev->dev, parent_name);
+ if (IS_ERR(parent)) {
+ pr_err("%s: %s not found\n", __func__, parent_name);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(timer->fclk, parent);
+ if (ret < 0)
+ pr_err("%s: failed to set %s as parent\n", __func__,
+ parent_name);
+
+ clk_put(parent);
+
+ return ret;
+}
+
+static void omap_dm_timer_enable(struct omap_dm_timer *timer)
+{
+ int c;
+
+ pm_runtime_get_sync(&timer->pdev->dev);
+
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (timer->get_context_loss_count) {
+ c = timer->get_context_loss_count(&timer->pdev->dev);
+ if (c != timer->ctx_loss_count) {
+ omap_timer_restore_context(timer);
+ timer->ctx_loss_count = c;
+ }
+ } else {
+ omap_timer_restore_context(timer);
+ }
+ }
+}
+
+static void omap_dm_timer_disable(struct omap_dm_timer *timer)
+{
+ pm_runtime_put_sync(&timer->pdev->dev);
+}
+
static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
int rc;
@@ -298,24 +378,22 @@ found:
return timer;
}
-struct omap_dm_timer *omap_dm_timer_request(void)
+static struct omap_dm_timer *omap_dm_timer_request(void)
{
return _omap_dm_timer_request(REQUEST_ANY, NULL);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request);
-struct omap_dm_timer *omap_dm_timer_request_specific(int id)
+static struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
/* Requesting timer by ID is not supported when device tree is used */
if (of_have_populated_dt()) {
- pr_warn("%s: Please use omap_dm_timer_request_by_cap/node()\n",
+ pr_warn("%s: Please use omap_dm_timer_request_by_node()\n",
__func__);
return NULL;
}
return _omap_dm_timer_request(REQUEST_BY_ID, &id);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
/**
* omap_dm_timer_request_by_cap - Request a timer by capability
@@ -330,7 +408,6 @@ struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap)
{
return _omap_dm_timer_request(REQUEST_BY_CAP, &cap);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
/**
* omap_dm_timer_request_by_node - Request a timer by device-tree node
@@ -339,16 +416,15 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
* Request a timer based upon a device node pointer. Returns pointer to
* timer handle on success and a NULL pointer on failure.
*/
-struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
+static struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
{
if (!np)
return NULL;
return _omap_dm_timer_request(REQUEST_BY_NODE, np);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_node);
-int omap_dm_timer_free(struct omap_dm_timer *timer)
+static int omap_dm_timer_free(struct omap_dm_timer *timer)
{
if (unlikely(!timer))
return -EINVAL;
@@ -359,33 +435,6 @@ int omap_dm_timer_free(struct omap_dm_timer *timer)
timer->reserved = 0;
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_free);
-
-void omap_dm_timer_enable(struct omap_dm_timer *timer)
-{
- int c;
-
- pm_runtime_get_sync(&timer->pdev->dev);
-
- if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (timer->get_context_loss_count) {
- c = timer->get_context_loss_count(&timer->pdev->dev);
- if (c != timer->ctx_loss_count) {
- omap_timer_restore_context(timer);
- timer->ctx_loss_count = c;
- }
- } else {
- omap_timer_restore_context(timer);
- }
- }
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
-
-void omap_dm_timer_disable(struct omap_dm_timer *timer)
-{
- pm_runtime_put_sync(&timer->pdev->dev);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
@@ -393,10 +442,15 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
return timer->irq;
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
#include <mach/hardware.h>
+
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+ return NULL;
+}
+
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
@@ -429,17 +483,15 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
return inputmask;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#else
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
if (timer && !IS_ERR(timer->fclk))
return timer->fclk;
return NULL;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
@@ -447,7 +499,6 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#endif
@@ -461,9 +512,8 @@ int omap_dm_timer_trigger(struct omap_dm_timer *timer)
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-int omap_dm_timer_start(struct omap_dm_timer *timer)
+static int omap_dm_timer_start(struct omap_dm_timer *timer)
{
u32 l;
@@ -482,9 +532,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
timer->context.tclr = l;
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-int omap_dm_timer_stop(struct omap_dm_timer *timer)
+static int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
@@ -506,73 +555,9 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
- int ret;
- char *parent_name = NULL;
- struct clk *parent;
- struct dmtimer_platform_data *pdata;
-
- if (unlikely(!timer))
- return -EINVAL;
-
- pdata = timer->pdev->dev.platform_data;
-
- if (source < 0 || source >= 3)
- return -EINVAL;
-
- /*
- * FIXME: Used for OMAP1 devices only because they do not currently
- * use the clock framework to set the parent clock. To be removed
- * once OMAP1 migrated to using clock framework for dmtimers
- */
- if (pdata && pdata->set_timer_src)
- return pdata->set_timer_src(timer->pdev, source);
-
- if (IS_ERR(timer->fclk))
- return -EINVAL;
-
-#if defined(CONFIG_COMMON_CLK)
- /* Check if the clock has configurable parents */
- if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
- return 0;
-#endif
-
- switch (source) {
- case OMAP_TIMER_SRC_SYS_CLK:
- parent_name = "timer_sys_ck";
- break;
-
- case OMAP_TIMER_SRC_32_KHZ:
- parent_name = "timer_32k_ck";
- break;
-
- case OMAP_TIMER_SRC_EXT_CLK:
- parent_name = "timer_ext_ck";
- break;
- }
-
- parent = clk_get(&timer->pdev->dev, parent_name);
- if (IS_ERR(parent)) {
- pr_err("%s: %s not found\n", __func__, parent_name);
- return -EINVAL;
- }
-
- ret = clk_set_parent(timer->fclk, parent);
- if (ret < 0)
- pr_err("%s: failed to set %s as parent\n", __func__,
- parent_name);
-
- clk_put(parent);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
- unsigned int load)
+static int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
{
u32 l;
@@ -595,7 +580,6 @@ int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
@@ -625,10 +609,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
timer->context.tcrr = load;
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
- unsigned int match)
+static int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+ unsigned int match)
{
u32 l;
@@ -650,10 +632,9 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
- int toggle, int trigger)
+static int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+ int toggle, int trigger)
{
u32 l;
@@ -676,19 +657,19 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+static int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer,
+ int prescaler)
{
u32 l;
- if (unlikely(!timer))
+ if (unlikely(!timer) || prescaler < -1 || prescaler > 7)
return -EINVAL;
omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
- if (prescaler >= 0x00 && prescaler <= 0x07) {
+ if (prescaler >= 0) {
l |= OMAP_TIMER_CTRL_PRE;
l |= prescaler << 2;
}
@@ -699,10 +680,9 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
+static int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
{
if (unlikely(!timer))
return -EINVAL;
@@ -716,7 +696,6 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
/**
* omap_dm_timer_set_int_disable - disable timer interrupts
@@ -725,7 +704,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
*
* Disables the specified timer interrupts for a timer.
*/
-int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
+static int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
{
u32 l = mask;
@@ -747,9 +726,8 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
omap_dm_timer_disable(timer);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+static unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
unsigned int l;
@@ -762,9 +740,8 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
return l;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+static int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
return -EINVAL;
@@ -773,9 +750,8 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+static unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
pr_err("%s: timer not iavailable or enabled.\n", __func__);
@@ -784,9 +760,8 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
return __omap_dm_timer_read_counter(timer, timer->posted);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+static int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
pr_err("%s: timer not available or enabled.\n", __func__);
@@ -799,7 +774,6 @@ int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
timer->context.tcrr = value;
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
@@ -816,7 +790,6 @@ int omap_dm_timers_active(void)
}
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timers_active);
static const struct of_device_id omap_timer_match[];
@@ -833,14 +806,16 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
struct omap_dm_timer *timer;
struct resource *mem, *irq;
struct device *dev = &pdev->dev;
- const struct of_device_id *match;
const struct dmtimer_platform_data *pdata;
int ret;
- match = of_match_device(of_match_ptr(omap_timer_match), dev);
- pdata = match ? match->data : dev->platform_data;
+ pdata = of_device_get_match_data(dev);
+ if (!pdata)
+ pdata = dev_get_platdata(dev);
+ else
+ dev->platform_data = (void *)pdata;
- if (!pdata && !dev->of_node) {
+ if (!pdata) {
dev_err(dev, "%s: no platform data.\n", __func__);
return -ENODEV;
}
@@ -946,8 +921,33 @@ static int omap_dm_timer_remove(struct platform_device *pdev)
return ret;
}
+const static struct omap_dm_timer_ops dmtimer_ops = {
+ .request_by_node = omap_dm_timer_request_by_node,
+ .request_specific = omap_dm_timer_request_specific,
+ .request = omap_dm_timer_request,
+ .set_source = omap_dm_timer_set_source,
+ .get_irq = omap_dm_timer_get_irq,
+ .set_int_enable = omap_dm_timer_set_int_enable,
+ .set_int_disable = omap_dm_timer_set_int_disable,
+ .free = omap_dm_timer_free,
+ .enable = omap_dm_timer_enable,
+ .disable = omap_dm_timer_disable,
+ .get_fclk = omap_dm_timer_get_fclk,
+ .start = omap_dm_timer_start,
+ .stop = omap_dm_timer_stop,
+ .set_load = omap_dm_timer_set_load,
+ .set_match = omap_dm_timer_set_match,
+ .set_pwm = omap_dm_timer_set_pwm,
+ .set_prescaler = omap_dm_timer_set_prescaler,
+ .read_counter = omap_dm_timer_read_counter,
+ .write_counter = omap_dm_timer_write_counter,
+ .read_status = omap_dm_timer_read_status,
+ .write_status = omap_dm_timer_write_status,
+};
+
static const struct dmtimer_platform_data omap3plus_pdata = {
.timer_errata = OMAP_TIMER_ERRATA_I103_I767,
+ .timer_ops = &dmtimer_ops,
};
static const struct of_device_id omap_timer_match[] = {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 736ac887303c..605ec8cce67b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -313,17 +313,6 @@ config MTD_NAND_ATMEL
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
-config MTD_NAND_PXA3xx
- tristate "NAND support on PXA3xx and Armada 370/XP"
- depends on !MTD_NAND_MARVELL
- depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
- help
-
- This enables the driver for the NAND flash device found on
- PXA3xx processors (NFCv1) and also on 32-bit Armada
- platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
- platforms (7K, 8K) (NFCv2).
-
config MTD_NAND_MARVELL
tristate "NAND controller support on Marvell boards"
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 921634ba400c..c882d5ef192a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -31,7 +31,6 @@ omap2_nand-objs := omap2.o
obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o
obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_MARVELL) += marvell_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
diff --git a/drivers/mtd/nand/marvell_nand.c b/drivers/mtd/nand/marvell_nand.c
index 2196f2a233d6..03805f9669da 100644
--- a/drivers/mtd/nand/marvell_nand.c
+++ b/drivers/mtd/nand/marvell_nand.c
@@ -2520,8 +2520,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
if (pdata)
/* Legacy bindings support only one chip */
- ret = mtd_device_register(mtd, pdata->parts[0],
- pdata->nr_parts[0]);
+ ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
else
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
deleted file mode 100644
index d1979c7dbe7e..000000000000
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ /dev/null
@@ -1,2105 +0,0 @@
-/*
- * drivers/mtd/nand/pxa3xx_nand.c
- *
- * Copyright © 2005 Intel Corporation
- * Copyright © 2006 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * See Documentation/mtd/nand/pxa3xx-nand.txt for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-
-#define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200)
-#define NAND_STOP_DELAY msecs_to_jiffies(40)
-#define PAGE_CHUNK_SIZE (2048)
-
-/*
- * Define a buffer size for the initial command that detects the flash device:
- * STATUS, READID and PARAM.
- * ONFI param page is 256 bytes, and there are three redundant copies
- * to be read. JEDEC param page is 512 bytes, and there are also three
- * redundant copies to be read.
- * Hence this buffer should be at least 512 x 3. Let's pick 2048.
- */
-#define INIT_BUFFER_SIZE 2048
-
-/* System control register and bit to enable NAND on some SoCs */
-#define GENCONF_SOC_DEVICE_MUX 0x208
-#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
-
-/* registers and bit definitions */
-#define NDCR (0x00) /* Control register */
-#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
-#define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */
-#define NDSR (0x14) /* Status Register */
-#define NDPCR (0x18) /* Page Count Register */
-#define NDBDR0 (0x1C) /* Bad Block Register 0 */
-#define NDBDR1 (0x20) /* Bad Block Register 1 */
-#define NDECCCTRL (0x28) /* ECC control */
-#define NDDB (0x40) /* Data Buffer */
-#define NDCB0 (0x48) /* Command Buffer0 */
-#define NDCB1 (0x4C) /* Command Buffer1 */
-#define NDCB2 (0x50) /* Command Buffer2 */
-
-#define NDCR_SPARE_EN (0x1 << 31)
-#define NDCR_ECC_EN (0x1 << 30)
-#define NDCR_DMA_EN (0x1 << 29)
-#define NDCR_ND_RUN (0x1 << 28)
-#define NDCR_DWIDTH_C (0x1 << 27)
-#define NDCR_DWIDTH_M (0x1 << 26)
-#define NDCR_PAGE_SZ (0x1 << 24)
-#define NDCR_NCSX (0x1 << 23)
-#define NDCR_ND_MODE (0x3 << 21)
-#define NDCR_NAND_MODE (0x0)
-#define NDCR_CLR_PG_CNT (0x1 << 20)
-#define NFCV1_NDCR_ARB_CNTL (0x1 << 19)
-#define NFCV2_NDCR_STOP_ON_UNCOR (0x1 << 19)
-#define NDCR_RD_ID_CNT_MASK (0x7 << 16)
-#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK)
-
-#define NDCR_RA_START (0x1 << 15)
-#define NDCR_PG_PER_BLK (0x1 << 14)
-#define NDCR_ND_ARB_EN (0x1 << 12)
-#define NDCR_INT_MASK (0xFFF)
-
-#define NDSR_MASK (0xfff)
-#define NDSR_ERR_CNT_OFF (16)
-#define NDSR_ERR_CNT_MASK (0x1f)
-#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
-#define NDSR_RDY (0x1 << 12)
-#define NDSR_FLASH_RDY (0x1 << 11)
-#define NDSR_CS0_PAGED (0x1 << 10)
-#define NDSR_CS1_PAGED (0x1 << 9)
-#define NDSR_CS0_CMDD (0x1 << 8)
-#define NDSR_CS1_CMDD (0x1 << 7)
-#define NDSR_CS0_BBD (0x1 << 6)
-#define NDSR_CS1_BBD (0x1 << 5)
-#define NDSR_UNCORERR (0x1 << 4)
-#define NDSR_CORERR (0x1 << 3)
-#define NDSR_WRDREQ (0x1 << 2)
-#define NDSR_RDDREQ (0x1 << 1)
-#define NDSR_WRCMDREQ (0x1)
-
-#define NDCB0_LEN_OVRD (0x1 << 28)
-#define NDCB0_ST_ROW_EN (0x1 << 26)
-#define NDCB0_AUTO_RS (0x1 << 25)
-#define NDCB0_CSEL (0x1 << 24)
-#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29)
-#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
-#define NDCB0_CMD_TYPE_MASK (0x7 << 21)
-#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
-#define NDCB0_NC (0x1 << 20)
-#define NDCB0_DBC (0x1 << 19)
-#define NDCB0_ADDR_CYC_MASK (0x7 << 16)
-#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK)
-#define NDCB0_CMD2_MASK (0xff << 8)
-#define NDCB0_CMD1_MASK (0xff)
-#define NDCB0_ADDR_CYC_SHIFT (16)
-
-#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
-#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
-#define EXT_CMD_TYPE_READ 4 /* Read */
-#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
-#define EXT_CMD_TYPE_FINAL 3 /* Final command */
-#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
-#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
-
-/*
- * This should be large enough to read 'ONFI' and 'JEDEC'.
- * Let's use 7 bytes, which is the maximum ID count supported
- * by the controller (see NDCR_RD_ID_CNT_MASK).
- */
-#define READ_ID_BYTES 7
-
-/* macros for registers read/write */
-#define nand_writel(info, off, val) \
- do { \
- dev_vdbg(&info->pdev->dev, \
- "%s():%d nand_writel(0x%x, 0x%04x)\n", \
- __func__, __LINE__, (val), (off)); \
- writel_relaxed((val), (info)->mmio_base + (off)); \
- } while (0)
-
-#define nand_readl(info, off) \
- ({ \
- unsigned int _v; \
- _v = readl_relaxed((info)->mmio_base + (off)); \
- dev_vdbg(&info->pdev->dev, \
- "%s():%d nand_readl(0x%04x) = 0x%x\n", \
- __func__, __LINE__, (off), _v); \
- _v; \
- })
-
-/* error code and state */
-enum {
- ERR_NONE = 0,
- ERR_DMABUSERR = -1,
- ERR_SENDCMD = -2,
- ERR_UNCORERR = -3,
- ERR_BBERR = -4,
- ERR_CORERR = -5,
-};
-
-enum {
- STATE_IDLE = 0,
- STATE_PREPARED,
- STATE_CMD_HANDLE,
- STATE_DMA_READING,
- STATE_DMA_WRITING,
- STATE_DMA_DONE,
- STATE_PIO_READING,
- STATE_PIO_WRITING,
- STATE_CMD_DONE,
- STATE_READY,
-};
-
-enum pxa3xx_nand_variant {
- PXA3XX_NAND_VARIANT_PXA,
- PXA3XX_NAND_VARIANT_ARMADA370,
- PXA3XX_NAND_VARIANT_ARMADA_8K,
-};
-
-struct pxa3xx_nand_host {
- struct nand_chip chip;
- void *info_data;
-
- /* page size of attached chip */
- int use_ecc;
- int cs;
-
- /* calculated from pxa3xx_nand_flash data */
- unsigned int col_addr_cycles;
- unsigned int row_addr_cycles;
-};
-
-struct pxa3xx_nand_info {
- struct nand_hw_control controller;
- struct platform_device *pdev;
-
- struct clk *clk;
- void __iomem *mmio_base;
- unsigned long mmio_phys;
- struct completion cmd_complete, dev_ready;
-
- unsigned int buf_start;
- unsigned int buf_count;
- unsigned int buf_size;
- unsigned int data_buff_pos;
- unsigned int oob_buff_pos;
-
- /* DMA information */
- struct scatterlist sg;
- enum dma_data_direction dma_dir;
- struct dma_chan *dma_chan;
- dma_cookie_t dma_cookie;
- int drcmr_dat;
-
- unsigned char *data_buff;
- unsigned char *oob_buff;
- dma_addr_t data_buff_phys;
- int data_dma_ch;
-
- struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
- unsigned int state;
-
- /*
- * This driver supports NFCv1 (as found in PXA SoC)
- * and NFCv2 (as found in Armada 370/XP SoC).
- */
- enum pxa3xx_nand_variant variant;
-
- int cs;
- int use_ecc; /* use HW ECC ? */
- int ecc_bch; /* using BCH ECC? */
- int use_dma; /* use DMA ? */
- int use_spare; /* use spare ? */
- int need_wait;
-
- /* Amount of real data per full chunk */
- unsigned int chunk_size;
-
- /* Amount of spare data per full chunk */
- unsigned int spare_size;
-
- /* Number of full chunks (i.e chunk_size + spare_size) */
- unsigned int nfullchunks;
-
- /*
- * Total number of chunks. If equal to nfullchunks, then there
- * are only full chunks. Otherwise, there is one last chunk of
- * size (last_chunk_size + last_spare_size)
- */
- unsigned int ntotalchunks;
-
- /* Amount of real data in the last chunk */
- unsigned int last_chunk_size;
-
- /* Amount of spare data in the last chunk */
- unsigned int last_spare_size;
-
- unsigned int ecc_size;
- unsigned int ecc_err_cnt;
- unsigned int max_bitflips;
- int retcode;
-
- /*
- * Variables only valid during command
- * execution. step_chunk_size and step_spare_size is the
- * amount of real data and spare data in the current
- * chunk. cur_chunk is the current chunk being
- * read/programmed.
- */
- unsigned int step_chunk_size;
- unsigned int step_spare_size;
- unsigned int cur_chunk;
-
- /* cached register value */
- uint32_t reg_ndcr;
- uint32_t ndtr0cs0;
- uint32_t ndtr1cs0;
-
- /* generated NDCBx register values */
- uint32_t ndcb0;
- uint32_t ndcb1;
- uint32_t ndcb2;
- uint32_t ndcb3;
-};
-
-static bool use_dma = 1;
-module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
-
-struct pxa3xx_nand_timing {
- unsigned int tCH; /* Enable signal hold time */
- unsigned int tCS; /* Enable signal setup time */
- unsigned int tWH; /* ND_nWE high duration */
- unsigned int tWP; /* ND_nWE pulse time */
- unsigned int tRH; /* ND_nRE high duration */
- unsigned int tRP; /* ND_nRE pulse width */
- unsigned int tR; /* ND_nWE high to ND_nRE low for read */
- unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
- unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_flash {
- uint32_t chip_id;
- unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
- unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
- struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-};
-
-static struct pxa3xx_nand_timing timing[] = {
- { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
- { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
- { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
- { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
-};
-
-static struct pxa3xx_nand_flash builtin_flash_types[] = {
- { 0x46ec, 16, 16, &timing[1] },
- { 0xdaec, 8, 8, &timing[1] },
- { 0xd7ec, 8, 8, &timing[1] },
- { 0xa12c, 8, 8, &timing[2] },
- { 0xb12c, 16, 16, &timing[2] },
- { 0xdc2c, 8, 8, &timing[2] },
- { 0xcc2c, 16, 16, &timing[2] },
- { 0xba20, 16, 16, &timing[3] },
-};
-
-static int pxa3xx_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int nchunks = mtd->writesize / info->chunk_size;
-
- if (section >= nchunks)
- return -ERANGE;
-
- oobregion->offset = ((info->ecc_size + info->spare_size) * section) +
- info->spare_size;
- oobregion->length = info->ecc_size;
-
- return 0;
-}
-
-static int pxa3xx_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int nchunks = mtd->writesize / info->chunk_size;
-
- if (section >= nchunks)
- return -ERANGE;
-
- if (!info->spare_size)
- return 0;
-
- oobregion->offset = section * (info->ecc_size + info->spare_size);
- oobregion->length = info->spare_size;
- if (!section) {
- /*
- * Bootrom looks in bytes 0 & 5 for bad blocks for the
- * 4KB page / 4bit BCH combination.
- */
- if (mtd->writesize == 4096 && info->chunk_size == 2048) {
- oobregion->offset += 6;
- oobregion->length -= 6;
- } else {
- oobregion->offset += 2;
- oobregion->length -= 2;
- }
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops pxa3xx_ooblayout_ops = {
- .ecc = pxa3xx_ooblayout_ecc,
- .free = pxa3xx_ooblayout_free,
-};
-
-static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
-static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
-
-static struct nand_bbt_descr bbt_main_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION,
- .offs = 8,
- .len = 6,
- .veroffs = 14,
- .maxblocks = 8, /* Last 8 blocks in each chip */
- .pattern = bbt_pattern
-};
-
-static struct nand_bbt_descr bbt_mirror_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION,
- .offs = 8,
- .len = 6,
- .veroffs = 14,
- .maxblocks = 8, /* Last 8 blocks in each chip */
- .pattern = bbt_mirror_pattern
-};
-
-#define NDTR0_tCH(c) (min((c), 7) << 19)
-#define NDTR0_tCS(c) (min((c), 7) << 16)
-#define NDTR0_tWH(c) (min((c), 7) << 11)
-#define NDTR0_tWP(c) (min((c), 7) << 8)
-#define NDTR0_tRH(c) (min((c), 7) << 3)
-#define NDTR0_tRP(c) (min((c), 7) << 0)
-
-#define NDTR1_tR(c) (min((c), 65535) << 16)
-#define NDTR1_tWHR(c) (min((c), 15) << 4)
-#define NDTR1_tAR(c) (min((c), 15) << 0)
-
-/* convert nano-seconds to nand flash controller clock cycles */
-#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-
-static const struct of_device_id pxa3xx_nand_dt_ids[] = {
- {
- .compatible = "marvell,pxa3xx-nand",
- .data = (void *)PXA3XX_NAND_VARIANT_PXA,
- },
- {
- .compatible = "marvell,armada370-nand",
- .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
- },
- {
- .compatible = "marvell,armada-8k-nand",
- .data = (void *)PXA3XX_NAND_VARIANT_ARMADA_8K,
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
-
-static enum pxa3xx_nand_variant
-pxa3xx_nand_get_variant(struct platform_device *pdev)
-{
- const struct of_device_id *of_id =
- of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
- if (!of_id)
- return PXA3XX_NAND_VARIANT_PXA;
- return (enum pxa3xx_nand_variant)of_id->data;
-}
-
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
- const struct pxa3xx_nand_timing *t)
-{
- struct pxa3xx_nand_info *info = host->info_data;
- unsigned long nand_clk = clk_get_rate(info->clk);
- uint32_t ndtr0, ndtr1;
-
- ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
- NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
- NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
- NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
- NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
- NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
-
- ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
- NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
- NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
-
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
- nand_writel(info, NDTR0CS0, ndtr0);
- nand_writel(info, NDTR1CS0, ndtr1);
-}
-
-static void pxa3xx_nand_set_sdr_timing(struct pxa3xx_nand_host *host,
- const struct nand_sdr_timings *t)
-{
- struct pxa3xx_nand_info *info = host->info_data;
- struct nand_chip *chip = &host->chip;
- unsigned long nand_clk = clk_get_rate(info->clk);
- uint32_t ndtr0, ndtr1;
-
- u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
- u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
- u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
- u32 tWP_min = DIV_ROUND_UP(t->tWC_min - t->tWH_min, 1000);
- u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
- u32 tRP_min = DIV_ROUND_UP(t->tRC_min - t->tREH_min, 1000);
- u32 tR = chip->chip_delay * 1000;
- u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
- u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
-
- /* fallback to a default value if tR = 0 */
- if (!tR)
- tR = 20000;
-
- ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
- NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
- NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
- NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
- NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
- NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
-
- ndtr1 = NDTR1_tR(ns2cycle(tR, nand_clk)) |
- NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
- NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
-
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
- nand_writel(info, NDTR0CS0, ndtr0);
- nand_writel(info, NDTR1CS0, ndtr1);
-}
-
-static int pxa3xx_nand_init_timings_compat(struct pxa3xx_nand_host *host,
- unsigned int *flash_width,
- unsigned int *dfc_width)
-{
- struct nand_chip *chip = &host->chip;
- struct pxa3xx_nand_info *info = host->info_data;
- const struct pxa3xx_nand_flash *f = NULL;
- int i, id, ntypes;
- u8 idbuf[2];
-
- ntypes = ARRAY_SIZE(builtin_flash_types);
-
- nand_readid_op(chip, 0, idbuf, sizeof(idbuf));
- id = idbuf[0] | (idbuf[1] << 8);
-
- for (i = 0; i < ntypes; i++) {
- f = &builtin_flash_types[i];
-
- if (f->chip_id == id)
- break;
- }
-
- if (i == ntypes) {
- dev_err(&info->pdev->dev, "Error: timings not found\n");
- return -EINVAL;
- }
-
- pxa3xx_nand_set_timing(host, f->timing);
-
- *flash_width = f->flash_width;
- *dfc_width = f->dfc_width;
-
- return 0;
-}
-
-static int pxa3xx_nand_init_timings_onfi(struct pxa3xx_nand_host *host,
- int mode)
-{
- const struct nand_sdr_timings *timings;
-
- mode = fls(mode) - 1;
- if (mode < 0)
- mode = 0;
-
- timings = onfi_async_timing_mode_to_sdr_timings(mode);
- if (IS_ERR(timings))
- return PTR_ERR(timings);
-
- pxa3xx_nand_set_sdr_timing(host, timings);
-
- return 0;
-}
-
-static int pxa3xx_nand_init(struct pxa3xx_nand_host *host)
-{
- struct nand_chip *chip = &host->chip;
- struct pxa3xx_nand_info *info = host->info_data;
- unsigned int flash_width = 0, dfc_width = 0;
- int mode, err;
-
- mode = onfi_get_async_timing_mode(chip);
- if (mode == ONFI_TIMING_MODE_UNKNOWN) {
- err = pxa3xx_nand_init_timings_compat(host, &flash_width,
- &dfc_width);
- if (err)
- return err;
-
- if (flash_width == 16) {
- info->reg_ndcr |= NDCR_DWIDTH_M;
- chip->options |= NAND_BUSWIDTH_16;
- }
-
- info->reg_ndcr |= (dfc_width == 16) ? NDCR_DWIDTH_C : 0;
- } else {
- err = pxa3xx_nand_init_timings_onfi(host, mode);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-/**
- * NOTE: it is a must to set ND_RUN firstly, then write
- * command buffer, otherwise, it does not work.
- * We enable all the interrupt at the same time, and
- * let pxa3xx_nand_irq to handle all logic.
- */
-static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
-{
- uint32_t ndcr;
-
- ndcr = info->reg_ndcr;
-
- if (info->use_ecc) {
- ndcr |= NDCR_ECC_EN;
- if (info->ecc_bch)
- nand_writel(info, NDECCCTRL, 0x1);
- } else {
- ndcr &= ~NDCR_ECC_EN;
- if (info->ecc_bch)
- nand_writel(info, NDECCCTRL, 0x0);
- }
-
- if (info->use_dma)
- ndcr |= NDCR_DMA_EN;
- else
- ndcr &= ~NDCR_DMA_EN;
-
- if (info->use_spare)
- ndcr |= NDCR_SPARE_EN;
- else
- ndcr &= ~NDCR_SPARE_EN;
-
- ndcr |= NDCR_ND_RUN;
-
- /* clear status bits and run */
- nand_writel(info, NDSR, NDSR_MASK);
- nand_writel(info, NDCR, 0);
- nand_writel(info, NDCR, ndcr);
-}
-
-static void pxa3xx_nand_stop(struct pxa3xx_nand_info *info)
-{
- uint32_t ndcr;
- int timeout = NAND_STOP_DELAY;
-
- /* wait RUN bit in NDCR become 0 */
- ndcr = nand_readl(info, NDCR);
- while ((ndcr & NDCR_ND_RUN) && (timeout-- > 0)) {
- ndcr = nand_readl(info, NDCR);
- udelay(1);
- }
-
- if (timeout <= 0) {
- ndcr &= ~NDCR_ND_RUN;
- nand_writel(info, NDCR, ndcr);
- }
- if (info->dma_chan)
- dmaengine_terminate_all(info->dma_chan);
-
- /* clear status bits */
- nand_writel(info, NDSR, NDSR_MASK);
-}
-
-static void __maybe_unused
-enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
-{
- uint32_t ndcr;
-
- ndcr = nand_readl(info, NDCR);
- nand_writel(info, NDCR, ndcr & ~int_mask);
-}
-
-static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
-{
- uint32_t ndcr;
-
- ndcr = nand_readl(info, NDCR);
- nand_writel(info, NDCR, ndcr | int_mask);
-}
-
-static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
-{
- if (info->ecc_bch) {
- u32 val;
- int ret;
-
- /*
- * According to the datasheet, when reading from NDDB
- * with BCH enabled, after each 32 bytes reads, we
- * have to make sure that the NDSR.RDDREQ bit is set.
- *
- * Drain the FIFO 8 32 bits reads at a time, and skip
- * the polling on the last read.
- */
- while (len > 8) {
- ioread32_rep(info->mmio_base + NDDB, data, 8);
-
- ret = readl_relaxed_poll_timeout(info->mmio_base + NDSR, val,
- val & NDSR_RDDREQ, 1000, 5000);
- if (ret) {
- dev_err(&info->pdev->dev,
- "Timeout on RDDREQ while draining the FIFO\n");
- return;
- }
-
- data += 32;
- len -= 8;
- }
- }
-
- ioread32_rep(info->mmio_base + NDDB, data, len);
-}
-
-static void handle_data_pio(struct pxa3xx_nand_info *info)
-{
- switch (info->state) {
- case STATE_PIO_WRITING:
- if (info->step_chunk_size)
- writesl(info->mmio_base + NDDB,
- info->data_buff + info->data_buff_pos,
- DIV_ROUND_UP(info->step_chunk_size, 4));
-
- if (info->step_spare_size)
- writesl(info->mmio_base + NDDB,
- info->oob_buff + info->oob_buff_pos,
- DIV_ROUND_UP(info->step_spare_size, 4));
- break;
- case STATE_PIO_READING:
- if (info->step_chunk_size)
- drain_fifo(info,
- info->data_buff + info->data_buff_pos,
- DIV_ROUND_UP(info->step_chunk_size, 4));
-
- if (info->step_spare_size)
- drain_fifo(info,
- info->oob_buff + info->oob_buff_pos,
- DIV_ROUND_UP(info->step_spare_size, 4));
- break;
- default:
- dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
- info->state);
- BUG();
- }
-
- /* Update buffer pointers for multi-page read/write */
- info->data_buff_pos += info->step_chunk_size;
- info->oob_buff_pos += info->step_spare_size;
-}
-
-static void pxa3xx_nand_data_dma_irq(void *data)
-{
- struct pxa3xx_nand_info *info = data;
- struct dma_tx_state state;
- enum dma_status status;
-
- status = dmaengine_tx_status(info->dma_chan, info->dma_cookie, &state);
- if (likely(status == DMA_COMPLETE)) {
- info->state = STATE_DMA_DONE;
- } else {
- dev_err(&info->pdev->dev, "DMA error on data channel\n");
- info->retcode = ERR_DMABUSERR;
- }
- dma_unmap_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
-
- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
- enable_int(info, NDCR_INT_MASK);
-}
-
-static void start_data_dma(struct pxa3xx_nand_info *info)
-{
- enum dma_transfer_direction direction;
- struct dma_async_tx_descriptor *tx;
-
- switch (info->state) {
- case STATE_DMA_WRITING:
- info->dma_dir = DMA_TO_DEVICE;
- direction = DMA_MEM_TO_DEV;
- break;
- case STATE_DMA_READING:
- info->dma_dir = DMA_FROM_DEVICE;
- direction = DMA_DEV_TO_MEM;
- break;
- default:
- dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
- info->state);
- BUG();
- }
- info->sg.length = info->chunk_size;
- if (info->use_spare)
- info->sg.length += info->spare_size + info->ecc_size;
- dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
-
- tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
- DMA_PREP_INTERRUPT);
- if (!tx) {
- dev_err(&info->pdev->dev, "prep_slave_sg() failed\n");
- return;
- }
- tx->callback = pxa3xx_nand_data_dma_irq;
- tx->callback_param = info;
- info->dma_cookie = dmaengine_submit(tx);
- dma_async_issue_pending(info->dma_chan);
- dev_dbg(&info->pdev->dev, "%s(dir=%d cookie=%x size=%u)\n",
- __func__, direction, info->dma_cookie, info->sg.length);
-}
-
-static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
-{
- struct pxa3xx_nand_info *info = data;
-
- handle_data_pio(info);
-
- info->state = STATE_CMD_DONE;
- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
-{
- struct pxa3xx_nand_info *info = devid;
- unsigned int status, is_completed = 0, is_ready = 0;
- unsigned int ready, cmd_done;
- irqreturn_t ret = IRQ_HANDLED;
-
- if (info->cs == 0) {
- ready = NDSR_FLASH_RDY;
- cmd_done = NDSR_CS0_CMDD;
- } else {
- ready = NDSR_RDY;
- cmd_done = NDSR_CS1_CMDD;
- }
-
- status = nand_readl(info, NDSR);
-
- if (status & NDSR_UNCORERR)
- info->retcode = ERR_UNCORERR;
- if (status & NDSR_CORERR) {
- info->retcode = ERR_CORERR;
- if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
- info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
- info->ecc_bch)
- info->ecc_err_cnt = NDSR_ERR_CNT(status);
- else
- info->ecc_err_cnt = 1;
-
- /*
- * Each chunk composing a page is corrected independently,
- * and we need to store maximum number of corrected bitflips
- * to return it to the MTD layer in ecc.read_page().
- */
- info->max_bitflips = max_t(unsigned int,
- info->max_bitflips,
- info->ecc_err_cnt);
- }
- if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
- /* whether use dma to transfer data */
- if (info->use_dma) {
- disable_int(info, NDCR_INT_MASK);
- info->state = (status & NDSR_RDDREQ) ?
- STATE_DMA_READING : STATE_DMA_WRITING;
- start_data_dma(info);
- goto NORMAL_IRQ_EXIT;
- } else {
- info->state = (status & NDSR_RDDREQ) ?
- STATE_PIO_READING : STATE_PIO_WRITING;
- ret = IRQ_WAKE_THREAD;
- goto NORMAL_IRQ_EXIT;
- }
- }
- if (status & cmd_done) {
- info->state = STATE_CMD_DONE;
- is_completed = 1;
- }
- if (status & ready) {
- info->state = STATE_READY;
- is_ready = 1;
- }
-
- /*
- * Clear all status bit before issuing the next command, which
- * can and will alter the status bits and will deserve a new
- * interrupt on its own. This lets the controller exit the IRQ
- */
- nand_writel(info, NDSR, status);
-
- if (status & NDSR_WRCMDREQ) {
- status &= ~NDSR_WRCMDREQ;
- info->state = STATE_CMD_HANDLE;
-
- /*
- * Command buffer registers NDCB{0-2} (and optionally NDCB3)
- * must be loaded by writing directly either 12 or 16
- * bytes directly to NDCB0, four bytes at a time.
- *
- * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
- * but each NDCBx register can be read.
- */
- nand_writel(info, NDCB0, info->ndcb0);
- nand_writel(info, NDCB0, info->ndcb1);
- nand_writel(info, NDCB0, info->ndcb2);
-
- /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
- info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
- nand_writel(info, NDCB0, info->ndcb3);
- }
-
- if (is_completed)
- complete(&info->cmd_complete);
- if (is_ready)
- complete(&info->dev_ready);
-NORMAL_IRQ_EXIT:
- return ret;
-}
-
-static inline int is_buf_blank(uint8_t *buf, size_t len)
-{
- for (; len > 0; len--)
- if (*buf++ != 0xff)
- return 0;
- return 1;
-}
-
-static void set_command_address(struct pxa3xx_nand_info *info,
- unsigned int page_size, uint16_t column, int page_addr)
-{
- /* small page addr setting */
- if (page_size < PAGE_CHUNK_SIZE) {
- info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
- | (column & 0xFF);
-
- info->ndcb2 = 0;
- } else {
- info->ndcb1 = ((page_addr & 0xFFFF) << 16)
- | (column & 0xFFFF);
-
- if (page_addr & 0xFF0000)
- info->ndcb2 = (page_addr & 0xFF0000) >> 16;
- else
- info->ndcb2 = 0;
- }
-}
-
-static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
-{
- struct pxa3xx_nand_host *host = info->host[info->cs];
- struct mtd_info *mtd = nand_to_mtd(&host->chip);
-
- /* reset data and oob column point to handle data */
- info->buf_start = 0;
- info->buf_count = 0;
- info->data_buff_pos = 0;
- info->oob_buff_pos = 0;
- info->step_chunk_size = 0;
- info->step_spare_size = 0;
- info->cur_chunk = 0;
- info->use_ecc = 0;
- info->use_spare = 1;
- info->retcode = ERR_NONE;
- info->ecc_err_cnt = 0;
- info->ndcb3 = 0;
- info->need_wait = 0;
-
- switch (command) {
- case NAND_CMD_READ0:
- case NAND_CMD_READOOB:
- case NAND_CMD_PAGEPROG:
- info->use_ecc = 1;
- break;
- case NAND_CMD_PARAM:
- info->use_spare = 0;
- break;
- default:
- info->ndcb1 = 0;
- info->ndcb2 = 0;
- break;
- }
-
- /*
- * If we are about to issue a read command, or about to set
- * the write address, then clean the data buffer.
- */
- if (command == NAND_CMD_READ0 ||
- command == NAND_CMD_READOOB ||
- command == NAND_CMD_SEQIN) {
-
- info->buf_count = mtd->writesize + mtd->oobsize;
- memset(info->data_buff, 0xFF, info->buf_count);
- }
-
-}
-
-static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
- int ext_cmd_type, uint16_t column, int page_addr)
-{
- int addr_cycle, exec_cmd;
- struct pxa3xx_nand_host *host;
- struct mtd_info *mtd;
-
- host = info->host[info->cs];
- mtd = nand_to_mtd(&host->chip);
- addr_cycle = 0;
- exec_cmd = 1;
-
- if (info->cs != 0)
- info->ndcb0 = NDCB0_CSEL;
- else
- info->ndcb0 = 0;
-
- if (command == NAND_CMD_SEQIN)
- exec_cmd = 0;
-
- addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
- + host->col_addr_cycles);
-
- switch (command) {
- case NAND_CMD_READOOB:
- case NAND_CMD_READ0:
- info->buf_start = column;
- info->ndcb0 |= NDCB0_CMD_TYPE(0)
- | addr_cycle
- | NAND_CMD_READ0;
-
- if (command == NAND_CMD_READOOB)
- info->buf_start += mtd->writesize;
-
- if (info->cur_chunk < info->nfullchunks) {
- info->step_chunk_size = info->chunk_size;
- info->step_spare_size = info->spare_size;
- } else {
- info->step_chunk_size = info->last_chunk_size;
- info->step_spare_size = info->last_spare_size;
- }
-
- /*
- * Multiple page read needs an 'extended command type' field,
- * which is either naked-read or last-read according to the
- * state.
- */
- if (mtd->writesize == PAGE_CHUNK_SIZE) {
- info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
- } else if (mtd->writesize > PAGE_CHUNK_SIZE) {
- info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
- | NDCB0_LEN_OVRD
- | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
- info->ndcb3 = info->step_chunk_size +
- info->step_spare_size;
- }
-
- set_command_address(info, mtd->writesize, column, page_addr);
- break;
-
- case NAND_CMD_SEQIN:
-
- info->buf_start = column;
- set_command_address(info, mtd->writesize, 0, page_addr);
-
- /*
- * Multiple page programming needs to execute the initial
- * SEQIN command that sets the page address.
- */
- if (mtd->writesize > PAGE_CHUNK_SIZE) {
- info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
- | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
- | addr_cycle
- | command;
- exec_cmd = 1;
- }
- break;
-
- case NAND_CMD_PAGEPROG:
- if (is_buf_blank(info->data_buff,
- (mtd->writesize + mtd->oobsize))) {
- exec_cmd = 0;
- break;
- }
-
- if (info->cur_chunk < info->nfullchunks) {
- info->step_chunk_size = info->chunk_size;
- info->step_spare_size = info->spare_size;
- } else {
- info->step_chunk_size = info->last_chunk_size;
- info->step_spare_size = info->last_spare_size;
- }
-
- /* Second command setting for large pages */
- if (mtd->writesize > PAGE_CHUNK_SIZE) {
- /*
- * Multiple page write uses the 'extended command'
- * field. This can be used to issue a command dispatch
- * or a naked-write depending on the current stage.
- */
- info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
- | NDCB0_LEN_OVRD
- | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
- info->ndcb3 = info->step_chunk_size +
- info->step_spare_size;
-
- /*
- * This is the command dispatch that completes a chunked
- * page program operation.
- */
- if (info->cur_chunk == info->ntotalchunks) {
- info->ndcb0 = NDCB0_CMD_TYPE(0x1)
- | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
- | command;
- info->ndcb1 = 0;
- info->ndcb2 = 0;
- info->ndcb3 = 0;
- }
- } else {
- info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
- | NDCB0_AUTO_RS
- | NDCB0_ST_ROW_EN
- | NDCB0_DBC
- | (NAND_CMD_PAGEPROG << 8)
- | NAND_CMD_SEQIN
- | addr_cycle;
- }
- break;
-
- case NAND_CMD_PARAM:
- info->buf_count = INIT_BUFFER_SIZE;
- info->ndcb0 |= NDCB0_CMD_TYPE(0)
- | NDCB0_ADDR_CYC(1)
- | NDCB0_LEN_OVRD
- | command;
- info->ndcb1 = (column & 0xFF);
- info->ndcb3 = INIT_BUFFER_SIZE;
- info->step_chunk_size = INIT_BUFFER_SIZE;
- break;
-
- case NAND_CMD_READID:
- info->buf_count = READ_ID_BYTES;
- info->ndcb0 |= NDCB0_CMD_TYPE(3)
- | NDCB0_ADDR_CYC(1)
- | command;
- info->ndcb1 = (column & 0xFF);
-
- info->step_chunk_size = 8;
- break;
- case NAND_CMD_STATUS:
- info->buf_count = 1;
- info->ndcb0 |= NDCB0_CMD_TYPE(4)
- | NDCB0_ADDR_CYC(1)
- | command;
-
- info->step_chunk_size = 8;
- break;
-
- case NAND_CMD_ERASE1:
- info->ndcb0 |= NDCB0_CMD_TYPE(2)
- | NDCB0_AUTO_RS
- | NDCB0_ADDR_CYC(3)
- | NDCB0_DBC
- | (NAND_CMD_ERASE2 << 8)
- | NAND_CMD_ERASE1;
- info->ndcb1 = page_addr;
- info->ndcb2 = 0;
-
- break;
- case NAND_CMD_RESET:
- info->ndcb0 |= NDCB0_CMD_TYPE(5)
- | command;
-
- break;
-
- case NAND_CMD_ERASE2:
- exec_cmd = 0;
- break;
-
- default:
- exec_cmd = 0;
- dev_err(&info->pdev->dev, "non-supported command %x\n",
- command);
- break;
- }
-
- return exec_cmd;
-}
-
-static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int exec_cmd;
-
- /*
- * if this is a x16 device ,then convert the input
- * "byte" address into a "word" address appropriate
- * for indexing a word-oriented device
- */
- if (info->reg_ndcr & NDCR_DWIDTH_M)
- column /= 2;
-
- /*
- * There may be different NAND chip hooked to
- * different chip select, so check whether
- * chip select has been changed, if yes, reset the timing
- */
- if (info->cs != host->cs) {
- info->cs = host->cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- }
-
- prepare_start_command(info, command);
-
- info->state = STATE_PREPARED;
- exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
-
- if (exec_cmd) {
- init_completion(&info->cmd_complete);
- init_completion(&info->dev_ready);
- info->need_wait = 1;
- pxa3xx_nand_start(info);
-
- if (!wait_for_completion_timeout(&info->cmd_complete,
- CHIP_DELAY_TIMEOUT)) {
- dev_err(&info->pdev->dev, "Wait time out!!!\n");
- /* Stop State Machine for next command cycle */
- pxa3xx_nand_stop(info);
- }
- }
- info->state = STATE_IDLE;
-}
-
-static void nand_cmdfunc_extended(struct mtd_info *mtd,
- const unsigned command,
- int column, int page_addr)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int exec_cmd, ext_cmd_type;
-
- /*
- * if this is a x16 device then convert the input
- * "byte" address into a "word" address appropriate
- * for indexing a word-oriented device
- */
- if (info->reg_ndcr & NDCR_DWIDTH_M)
- column /= 2;
-
- /*
- * There may be different NAND chip hooked to
- * different chip select, so check whether
- * chip select has been changed, if yes, reset the timing
- */
- if (info->cs != host->cs) {
- info->cs = host->cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- }
-
- /* Select the extended command for the first command */
- switch (command) {
- case NAND_CMD_READ0:
- case NAND_CMD_READOOB:
- ext_cmd_type = EXT_CMD_TYPE_MONO;
- break;
- case NAND_CMD_SEQIN:
- ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
- break;
- case NAND_CMD_PAGEPROG:
- ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
- break;
- default:
- ext_cmd_type = 0;
- break;
- }
-
- prepare_start_command(info, command);
-
- /*
- * Prepare the "is ready" completion before starting a command
- * transaction sequence. If the command is not executed the
- * completion will be completed, see below.
- *
- * We can do that inside the loop because the command variable
- * is invariant and thus so is the exec_cmd.
- */
- info->need_wait = 1;
- init_completion(&info->dev_ready);
- do {
- info->state = STATE_PREPARED;
-
- exec_cmd = prepare_set_command(info, command, ext_cmd_type,
- column, page_addr);
- if (!exec_cmd) {
- info->need_wait = 0;
- complete(&info->dev_ready);
- break;
- }
-
- init_completion(&info->cmd_complete);
- pxa3xx_nand_start(info);
-
- if (!wait_for_completion_timeout(&info->cmd_complete,
- CHIP_DELAY_TIMEOUT)) {
- dev_err(&info->pdev->dev, "Wait time out!!!\n");
- /* Stop State Machine for next command cycle */
- pxa3xx_nand_stop(info);
- break;
- }
-
- /* Only a few commands need several steps */
- if (command != NAND_CMD_PAGEPROG &&
- command != NAND_CMD_READ0 &&
- command != NAND_CMD_READOOB)
- break;
-
- info->cur_chunk++;
-
- /* Check if the sequence is complete */
- if (info->cur_chunk == info->ntotalchunks && command != NAND_CMD_PAGEPROG)
- break;
-
- /*
- * After a splitted program command sequence has issued
- * the command dispatch, the command sequence is complete.
- */
- if (info->cur_chunk == (info->ntotalchunks + 1) &&
- command == NAND_CMD_PAGEPROG &&
- ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
- break;
-
- if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
- /* Last read: issue a 'last naked read' */
- if (info->cur_chunk == info->ntotalchunks - 1)
- ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
- else
- ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
-
- /*
- * If a splitted program command has no more data to transfer,
- * the command dispatch must be issued to complete.
- */
- } else if (command == NAND_CMD_PAGEPROG &&
- info->cur_chunk == info->ntotalchunks) {
- ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
- }
- } while (1);
-
- info->state = STATE_IDLE;
-}
-
-static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf, int oob_required,
- int page)
-{
- nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
- chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- return nand_prog_page_end_op(chip);
-}
-
-static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf, int oob_required,
- int page)
-{
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
-
- nand_read_page_op(chip, page, 0, buf, mtd->writesize);
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- if (info->retcode == ERR_CORERR && info->use_ecc) {
- mtd->ecc_stats.corrected += info->ecc_err_cnt;
-
- } else if (info->retcode == ERR_UNCORERR) {
- /*
- * for blank page (all 0xff), HW will calculate its ECC as
- * 0, which is different from the ECC information within
- * OOB, ignore such uncorrectable errors
- */
- if (is_buf_blank(buf, mtd->writesize))
- info->retcode = ERR_NONE;
- else
- mtd->ecc_stats.failed++;
- }
-
- return info->max_bitflips;
-}
-
-static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- char retval = 0xFF;
-
- if (info->buf_start < info->buf_count)
- /* Has just send a new command? */
- retval = info->data_buff[info->buf_start++];
-
- return retval;
-}
-
-static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- u16 retval = 0xFFFF;
-
- if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
- retval = *((u16 *)(info->data_buff+info->buf_start));
- info->buf_start += 2;
- }
- return retval;
-}
-
-static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
-
- memcpy(buf, info->data_buff + info->buf_start, real_len);
- info->buf_start += real_len;
-}
-
-static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
- const uint8_t *buf, int len)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
-
- memcpy(info->data_buff + info->buf_start, buf, real_len);
- info->buf_start += real_len;
-}
-
-static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
-{
- return;
-}
-
-static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
-
- if (info->need_wait) {
- info->need_wait = 0;
- if (!wait_for_completion_timeout(&info->dev_ready,
- CHIP_DELAY_TIMEOUT)) {
- dev_err(&info->pdev->dev, "Ready time out!!!\n");
- return NAND_STATUS_FAIL;
- }
- }
-
- /* pxa3xx_nand_send_command has waited for command complete */
- if (this->state == FL_WRITING || this->state == FL_ERASING) {
- if (info->retcode == ERR_NONE)
- return 0;
- else
- return NAND_STATUS_FAIL;
- }
-
- return NAND_STATUS_READY;
-}
-
-static int pxa3xx_nand_config_ident(struct pxa3xx_nand_info *info)
-{
- struct pxa3xx_nand_host *host = info->host[info->cs];
- struct platform_device *pdev = info->pdev;
- struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- const struct nand_sdr_timings *timings;
-
- /* Configure default flash values */
- info->chunk_size = PAGE_CHUNK_SIZE;
- info->reg_ndcr = 0x0; /* enable all interrupts */
- info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
- info->reg_ndcr |= NDCR_SPARE_EN;
-
- /* use the common timing to make a try */
- timings = onfi_async_timing_mode_to_sdr_timings(0);
- if (IS_ERR(timings))
- return PTR_ERR(timings);
-
- pxa3xx_nand_set_sdr_timing(host, timings);
- return 0;
-}
-
-static void pxa3xx_nand_config_tail(struct pxa3xx_nand_info *info)
-{
- struct pxa3xx_nand_host *host = info->host[info->cs];
- struct nand_chip *chip = &host->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
-
- info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
- info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
- info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
-}
-
-static void pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
-{
- struct platform_device *pdev = info->pdev;
- struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- uint32_t ndcr = nand_readl(info, NDCR);
-
- /* Set an initial chunk size */
- info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- info->reg_ndcr = ndcr &
- ~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
- info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
- info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
-}
-
-static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
-{
- struct platform_device *pdev = info->pdev;
- struct dma_slave_config config;
- dma_cap_mask_t mask;
- struct pxad_param param;
- int ret;
-
- info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
- if (info->data_buff == NULL)
- return -ENOMEM;
- if (use_dma == 0)
- return 0;
-
- ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
- if (ret)
- return ret;
-
- sg_init_one(&info->sg, info->data_buff, info->buf_size);
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- param.prio = PXAD_PRIO_LOWEST;
- param.drcmr = info->drcmr_dat;
- info->dma_chan = dma_request_slave_channel_compat(mask, pxad_filter_fn,
- &param, &pdev->dev,
- "data");
- if (!info->dma_chan) {
- dev_err(&pdev->dev, "unable to request data dma channel\n");
- return -ENODEV;
- }
-
- memset(&config, 0, sizeof(config));
- config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- config.src_addr = info->mmio_phys + NDDB;
- config.dst_addr = info->mmio_phys + NDDB;
- config.src_maxburst = 32;
- config.dst_maxburst = 32;
- ret = dmaengine_slave_config(info->dma_chan, &config);
- if (ret < 0) {
- dev_err(&info->pdev->dev,
- "dma channel configuration failed: %d\n",
- ret);
- return ret;
- }
-
- /*
- * Now that DMA buffers are allocated we turn on
- * DMA proper for I/O operations.
- */
- info->use_dma = 1;
- return 0;
-}
-
-static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
-{
- if (info->use_dma) {
- dmaengine_terminate_all(info->dma_chan);
- dma_release_channel(info->dma_chan);
- }
- kfree(info->data_buff);
-}
-
-static int pxa_ecc_init(struct pxa3xx_nand_info *info,
- struct mtd_info *mtd,
- int strength, int ecc_stepsize, int page_size)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
- info->nfullchunks = 1;
- info->ntotalchunks = 1;
- info->chunk_size = 2048;
- info->spare_size = 40;
- info->ecc_size = 24;
- ecc->mode = NAND_ECC_HW;
- ecc->size = 512;
- ecc->strength = 1;
-
- } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
- info->nfullchunks = 1;
- info->ntotalchunks = 1;
- info->chunk_size = 512;
- info->spare_size = 8;
- info->ecc_size = 8;
- ecc->mode = NAND_ECC_HW;
- ecc->size = 512;
- ecc->strength = 1;
-
- /*
- * Required ECC: 4-bit correction per 512 bytes
- * Select: 16-bit correction per 2048 bytes
- */
- } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
- info->ecc_bch = 1;
- info->nfullchunks = 1;
- info->ntotalchunks = 1;
- info->chunk_size = 2048;
- info->spare_size = 32;
- info->ecc_size = 32;
- ecc->mode = NAND_ECC_HW;
- ecc->size = info->chunk_size;
- mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
- ecc->strength = 16;
-
- } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
- info->ecc_bch = 1;
- info->nfullchunks = 2;
- info->ntotalchunks = 2;
- info->chunk_size = 2048;
- info->spare_size = 32;
- info->ecc_size = 32;
- ecc->mode = NAND_ECC_HW;
- ecc->size = info->chunk_size;
- mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
- ecc->strength = 16;
-
- /*
- * Required ECC: 8-bit correction per 512 bytes
- * Select: 16-bit correction per 1024 bytes
- */
- } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
- info->ecc_bch = 1;
- info->nfullchunks = 4;
- info->ntotalchunks = 5;
- info->chunk_size = 1024;
- info->spare_size = 0;
- info->last_chunk_size = 0;
- info->last_spare_size = 64;
- info->ecc_size = 32;
- ecc->mode = NAND_ECC_HW;
- ecc->size = info->chunk_size;
- mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
- ecc->strength = 16;
- } else {
- dev_err(&info->pdev->dev,
- "ECC strength %d at page size %d is not supported\n",
- strength, page_size);
- return -ENODEV;
- }
-
- dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
- ecc->strength, ecc->size);
- return 0;
-}
-
-static int pxa3xx_nand_scan(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
- struct pxa3xx_nand_info *info = host->info_data;
- struct platform_device *pdev = info->pdev;
- struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret;
- uint16_t ecc_strength, ecc_step;
-
- if (pdata->keep_config) {
- pxa3xx_nand_detect_config(info);
- } else {
- ret = pxa3xx_nand_config_ident(info);
- if (ret)
- return ret;
- }
-
- if (info->reg_ndcr & NDCR_DWIDTH_M)
- chip->options |= NAND_BUSWIDTH_16;
-
- /* Device detection must be done with ECC disabled */
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
- info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
- nand_writel(info, NDECCCTRL, 0x0);
-
- if (pdata->flash_bbt)
- chip->bbt_options |= NAND_BBT_USE_FLASH;
-
- chip->ecc.strength = pdata->ecc_strength;
- chip->ecc.size = pdata->ecc_step_size;
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- if (!pdata->keep_config) {
- ret = pxa3xx_nand_init(host);
- if (ret) {
- dev_err(&info->pdev->dev, "Failed to init nand: %d\n",
- ret);
- return ret;
- }
- }
-
- if (chip->bbt_options & NAND_BBT_USE_FLASH) {
- /*
- * We'll use a bad block table stored in-flash and don't
- * allow writing the bad block marker to the flash.
- */
- chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
- chip->bbt_td = &bbt_main_descr;
- chip->bbt_md = &bbt_mirror_descr;
- }
-
- /*
- * If the page size is bigger than the FIFO size, let's check
- * we are given the right variant and then switch to the extended
- * (aka splitted) command handling,
- */
- if (mtd->writesize > PAGE_CHUNK_SIZE) {
- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
- info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
- chip->cmdfunc = nand_cmdfunc_extended;
- } else {
- dev_err(&info->pdev->dev,
- "unsupported page size on this variant\n");
- return -ENODEV;
- }
- }
-
- ecc_strength = chip->ecc.strength;
- ecc_step = chip->ecc.size;
- if (!ecc_strength || !ecc_step) {
- ecc_strength = chip->ecc_strength_ds;
- ecc_step = chip->ecc_step_ds;
- }
-
- /* Set default ECC strength requirements on non-ONFI devices */
- if (ecc_strength < 1 && ecc_step < 1) {
- ecc_strength = 1;
- ecc_step = 512;
- }
-
- ret = pxa_ecc_init(info, mtd, ecc_strength,
- ecc_step, mtd->writesize);
- if (ret)
- return ret;
-
- /* calculate addressing information */
- if (mtd->writesize >= 2048)
- host->col_addr_cycles = 2;
- else
- host->col_addr_cycles = 1;
-
- /* release the initial buffer */
- kfree(info->data_buff);
-
- /* allocate the real data + oob buffer */
- info->buf_size = mtd->writesize + mtd->oobsize;
- ret = pxa3xx_nand_init_buff(info);
- if (ret)
- return ret;
- info->oob_buff = info->data_buff + mtd->writesize;
-
- if ((mtd->size >> chip->page_shift) > 65536)
- host->row_addr_cycles = 3;
- else
- host->row_addr_cycles = 2;
-
- if (!pdata->keep_config)
- pxa3xx_nand_config_tail(info);
-
- return nand_scan_tail(mtd);
-}
-
-static int alloc_nand_resource(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct pxa3xx_nand_platform_data *pdata;
- struct pxa3xx_nand_info *info;
- struct pxa3xx_nand_host *host;
- struct nand_chip *chip = NULL;
- struct mtd_info *mtd;
- struct resource *r;
- int ret, irq, cs;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata->num_cs <= 0) {
- dev_err(&pdev->dev, "invalid number of chip selects\n");
- return -ENODEV;
- }
-
- info = devm_kzalloc(&pdev->dev,
- sizeof(*info) + sizeof(*host) * pdata->num_cs,
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->pdev = pdev;
- info->variant = pxa3xx_nand_get_variant(pdev);
- for (cs = 0; cs < pdata->num_cs; cs++) {
- host = (void *)&info[1] + sizeof(*host) * cs;
- chip = &host->chip;
- nand_set_controller_data(chip, host);
- mtd = nand_to_mtd(chip);
- info->host[cs] = host;
- host->cs = cs;
- host->info_data = info;
- mtd->dev.parent = &pdev->dev;
- /* FIXME: all chips use the same device tree partitions */
- nand_set_flash_node(chip, np);
-
- nand_set_controller_data(chip, host);
- chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- chip->controller = &info->controller;
- chip->waitfunc = pxa3xx_nand_waitfunc;
- chip->select_chip = pxa3xx_nand_select_chip;
- chip->read_word = pxa3xx_nand_read_word;
- chip->read_byte = pxa3xx_nand_read_byte;
- chip->read_buf = pxa3xx_nand_read_buf;
- chip->write_buf = pxa3xx_nand_write_buf;
- chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->cmdfunc = nand_cmdfunc;
- chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
- chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
- }
-
- nand_hw_control_init(chip->controller);
- info->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(info->clk)) {
- ret = PTR_ERR(info->clk);
- dev_err(&pdev->dev, "failed to get nand clock: %d\n", ret);
- return ret;
- }
- ret = clk_prepare_enable(info->clk);
- if (ret < 0)
- return ret;
-
- if (!np && use_dma) {
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (r == NULL) {
- dev_err(&pdev->dev,
- "no resource defined for data DMA\n");
- ret = -ENXIO;
- goto fail_disable_clk;
- }
- info->drcmr_dat = r->start;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no IRQ resource defined\n");
- ret = -ENXIO;
- goto fail_disable_clk;
- }
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(info->mmio_base)) {
- ret = PTR_ERR(info->mmio_base);
- dev_err(&pdev->dev, "failed to map register space: %d\n", ret);
- goto fail_disable_clk;
- }
- info->mmio_phys = r->start;
-
- /* Allocate a buffer to allow flash detection */
- info->buf_size = INIT_BUFFER_SIZE;
- info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
- if (info->data_buff == NULL) {
- ret = -ENOMEM;
- goto fail_disable_clk;
- }
-
- /* initialize all interrupts to be disabled */
- disable_int(info, NDSR_MASK);
-
- ret = request_threaded_irq(irq, pxa3xx_nand_irq,
- pxa3xx_nand_irq_thread, IRQF_ONESHOT,
- pdev->name, info);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
- goto fail_free_buf;
- }
-
- platform_set_drvdata(pdev, info);
-
- return 0;
-
-fail_free_buf:
- free_irq(irq, info);
- kfree(info->data_buff);
-fail_disable_clk:
- clk_disable_unprepare(info->clk);
- return ret;
-}
-
-static int pxa3xx_nand_remove(struct platform_device *pdev)
-{
- struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct pxa3xx_nand_platform_data *pdata;
- int irq, cs;
-
- if (!info)
- return 0;
-
- pdata = dev_get_platdata(&pdev->dev);
-
- irq = platform_get_irq(pdev, 0);
- if (irq >= 0)
- free_irq(irq, info);
- pxa3xx_nand_free_buff(info);
-
- /*
- * In the pxa3xx case, the DFI bus is shared between the SMC and NFC.
- * In order to prevent a lockup of the system bus, the DFI bus
- * arbitration is granted to SMC upon driver removal. This is done by
- * setting the x_ARB_CNTL bit, which also prevents the NAND to have
- * access to the bus anymore.
- */
- nand_writel(info, NDCR,
- (nand_readl(info, NDCR) & ~NDCR_ND_ARB_EN) |
- NFCV1_NDCR_ARB_CNTL);
- clk_disable_unprepare(info->clk);
-
- for (cs = 0; cs < pdata->num_cs; cs++)
- nand_release(nand_to_mtd(&info->host[cs]->chip));
- return 0;
-}
-
-static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
-{
- struct pxa3xx_nand_platform_data *pdata;
- struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *of_id =
- of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
-
- if (!of_id)
- return 0;
-
- /*
- * Some SoCs like A7k/A8k need to enable manually the NAND
- * controller to avoid being bootloader dependent. This is done
- * through the use of a single bit in the System Functions registers.
- */
- if (pxa3xx_nand_get_variant(pdev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
- struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
- pdev->dev.of_node, "marvell,system-controller");
- u32 reg;
-
- if (IS_ERR(sysctrl_base))
- return PTR_ERR(sysctrl_base);
-
- regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
- reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
- regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
- }
-
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
- pdata->enable_arbiter = 1;
- if (of_get_property(np, "marvell,nand-keep-config", NULL))
- pdata->keep_config = 1;
- of_property_read_u32(np, "num-cs", &pdata->num_cs);
-
- pdev->dev.platform_data = pdata;
-
- return 0;
-}
-
-static int pxa3xx_nand_probe(struct platform_device *pdev)
-{
- struct pxa3xx_nand_platform_data *pdata;
- struct pxa3xx_nand_info *info;
- int ret, cs, probe_success, dma_available;
-
- dma_available = IS_ENABLED(CONFIG_ARM) &&
- (IS_ENABLED(CONFIG_ARCH_PXA) || IS_ENABLED(CONFIG_ARCH_MMP));
- if (use_dma && !dma_available) {
- use_dma = 0;
- dev_warn(&pdev->dev,
- "This platform can't do DMA on this device\n");
- }
-
- ret = pxa3xx_nand_probe_dt(pdev);
- if (ret)
- return ret;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -ENODEV;
- }
-
- ret = alloc_nand_resource(pdev);
- if (ret)
- return ret;
-
- info = platform_get_drvdata(pdev);
- probe_success = 0;
- for (cs = 0; cs < pdata->num_cs; cs++) {
- struct mtd_info *mtd = nand_to_mtd(&info->host[cs]->chip);
-
- /*
- * The mtd name matches the one used in 'mtdparts' kernel
- * parameter. This name cannot be changed or otherwise
- * user's mtd partitions configuration would get broken.
- */
- mtd->name = "pxa3xx_nand-0";
- info->cs = cs;
- ret = pxa3xx_nand_scan(mtd);
- if (ret) {
- dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
- cs);
- continue;
- }
-
- ret = mtd_device_register(mtd, pdata->parts[cs],
- pdata->nr_parts[cs]);
- if (!ret)
- probe_success = 1;
- }
-
- if (!probe_success) {
- pxa3xx_nand_remove(pdev);
- return -ENODEV;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int pxa3xx_nand_suspend(struct device *dev)
-{
- struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
-
- if (info->state) {
- dev_err(dev, "driver busy, state = %d\n", info->state);
- return -EAGAIN;
- }
-
- clk_disable(info->clk);
- return 0;
-}
-
-static int pxa3xx_nand_resume(struct device *dev)
-{
- struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
- int ret;
-
- ret = clk_enable(info->clk);
- if (ret < 0)
- return ret;
-
- /* We don't want to handle interrupt without calling mtd routine */
- disable_int(info, NDCR_INT_MASK);
-
- /*
- * Directly set the chip select to a invalid value,
- * then the driver would reset the timing according
- * to current chip select at the beginning of cmdfunc
- */
- info->cs = 0xff;
-
- /*
- * As the spec says, the NDSR would be updated to 0x1800 when
- * doing the nand_clk disable/enable.
- * To prevent it damaging state machine of the driver, clear
- * all status before resume
- */
- nand_writel(info, NDSR, NDSR_MASK);
-
- return 0;
-}
-#else
-#define pxa3xx_nand_suspend NULL
-#define pxa3xx_nand_resume NULL
-#endif
-
-static const struct dev_pm_ops pxa3xx_nand_pm_ops = {
- .suspend = pxa3xx_nand_suspend,
- .resume = pxa3xx_nand_resume,
-};
-
-static struct platform_driver pxa3xx_nand_driver = {
- .driver = {
- .name = "pxa3xx-nand",
- .of_match_table = pxa3xx_nand_dt_ids,
- .pm = &pxa3xx_nand_pm_ops,
- },
- .probe = pxa3xx_nand_probe,
- .remove = pxa3xx_nand_remove,
-};
-
-module_platform_driver(pxa3xx_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("PXA3xx NAND controller driver");
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 1b82bff6330f..befb886ff121 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -20,6 +20,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -145,6 +146,7 @@ static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
static int da8xx_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct da8xx_usb_phy_platform_data *pdata = dev->platform_data;
struct device_node *node = dev->of_node;
struct da8xx_usb_phy *d_phy;
@@ -152,25 +154,25 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
if (!d_phy)
return -ENOMEM;
- if (node)
+ if (pdata)
+ d_phy->regmap = pdata->cfgchip;
+ else
d_phy->regmap = syscon_regmap_lookup_by_compatible(
"ti,da830-cfgchip");
- else
- d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
if (IS_ERR(d_phy->regmap)) {
dev_err(dev, "Failed to get syscon\n");
return PTR_ERR(d_phy->regmap);
}
- d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+ d_phy->usb11_clk = devm_clk_get(dev, "usb1_clk48");
if (IS_ERR(d_phy->usb11_clk)) {
- dev_err(dev, "Failed to get usb11_phy clock\n");
+ dev_err(dev, "Failed to get usb1_clk48\n");
return PTR_ERR(d_phy->usb11_clk);
}
- d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+ d_phy->usb20_clk = devm_clk_get(dev, "usb0_clk48");
if (IS_ERR(d_phy->usb20_clk)) {
- dev_err(dev, "Failed to get usb20_phy clock\n");
+ dev_err(dev, "Failed to get usb0_clk48\n");
return PTR_ERR(d_phy->usb20_clk);
}
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 89bf4d6cb486..cb0237143dbe 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -132,12 +132,16 @@ static void sr_set_clk_length(struct omap_sr *sr)
struct clk *fck;
u32 fclk_speed;
- fck = clk_get(&sr->pdev->dev, "fck");
-
+ /* Try interconnect target module fck first if it already exists */
+ fck = clk_get(sr->pdev->dev.parent, "fck");
if (IS_ERR(fck)) {
- dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
- __func__, dev_name(&sr->pdev->dev));
- return;
+ fck = clk_get(&sr->pdev->dev, "fck");
+ if (IS_ERR(fck)) {
+ dev_err(&sr->pdev->dev,
+ "%s: unable to get fck for device %s\n",
+ __func__, dev_name(&sr->pdev->dev));
+ return;
+ }
}
fclk_speed = clk_get_rate(fck);
@@ -838,7 +842,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
omap_sr_autocomp_store, "%llu\n");
-static int __init omap_sr_probe(struct platform_device *pdev)
+static int omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
@@ -898,6 +902,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
list_add(&sr_info->node, &sr_list);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
+ goto err_list_del;
+ }
+
/*
* Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
@@ -966,12 +976,17 @@ static int __init omap_sr_probe(struct platform_device *pdev)
}
+ pm_runtime_put_sync(&pdev->dev);
+
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
err_list_del:
list_del(&sr_info->node);
+
+ pm_runtime_put_sync(&pdev->dev);
+
return ret;
}
@@ -1025,11 +1040,23 @@ static void omap_sr_shutdown(struct platform_device *pdev)
return;
}
+static const struct of_device_id omap_sr_match[] = {
+ { .compatible = "ti,omap3-smartreflex-core", },
+ { .compatible = "ti,omap3-smartreflex-mpu-iva", },
+ { .compatible = "ti,omap4-smartreflex-core", },
+ { .compatible = "ti,omap4-smartreflex-mpu", },
+ { .compatible = "ti,omap4-smartreflex-iva", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_sr_match);
+
static struct platform_driver smartreflex_driver = {
+ .probe = omap_sr_probe,
.remove = omap_sr_remove,
.shutdown = omap_sr_shutdown,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = omap_sr_match,
},
};
@@ -1048,7 +1075,7 @@ static int __init sr_init(void)
else
pr_warn("%s: No PMIC hook to init smartreflex\n", __func__);
- ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+ ret = platform_driver_register(&smartreflex_driver);
if (ret) {
pr_err("%s: platform driver register failed for SR\n",
__func__);
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 5ad42f33e70c..665da3c8fbce 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/dmtimer-omap.h>
#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
@@ -37,7 +38,7 @@ struct pwm_omap_dmtimer_chip {
struct pwm_chip chip;
struct mutex mutex;
pwm_omap_dmtimer *dm_timer;
- struct pwm_omap_dmtimer_pdata *pdata;
+ const struct omap_dm_timer_ops *pdata;
struct platform_device *dm_timer_pdev;
};
@@ -242,19 +243,35 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *timer;
+ struct platform_device *timer_pdev;
struct pwm_omap_dmtimer_chip *omap;
- struct pwm_omap_dmtimer_pdata *pdata;
+ struct dmtimer_platform_data *timer_pdata;
+ const struct omap_dm_timer_ops *pdata;
pwm_omap_dmtimer *dm_timer;
u32 v;
- int status;
+ int ret = 0;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "Missing dmtimer platform data\n");
- return -EINVAL;
+ timer = of_parse_phandle(np, "ti,timers", 0);
+ if (!timer)
+ return -ENODEV;
+
+ timer_pdev = of_find_device_by_node(timer);
+ if (!timer_pdev) {
+ dev_err(&pdev->dev, "Unable to find Timer pdev\n");
+ ret = -ENODEV;
+ goto put;
}
- if (!pdata->request_by_node ||
+ timer_pdata = dev_get_platdata(&timer_pdev->dev);
+ if (!timer_pdata) {
+ dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
+ ret = -EINVAL;
+ goto put;
+ }
+
+ pdata = timer_pdata->timer_ops;
+
+ if (!pdata || !pdata->request_by_node ||
!pdata->free ||
!pdata->enable ||
!pdata->disable ||
@@ -267,21 +284,26 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
!pdata->set_prescaler ||
!pdata->write_counter) {
dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put;
}
- timer = of_parse_phandle(np, "ti,timers", 0);
- if (!timer)
- return -ENODEV;
-
if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto put;
}
dm_timer = pdata->request_by_node(timer);
- if (!dm_timer)
- return -EPROBE_DEFER;
+ if (!dm_timer) {
+ ret = -EPROBE_DEFER;
+ goto put;
+ }
+
+put:
+ of_node_put(timer);
+ if (ret < 0)
+ return ret;
omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
if (!omap) {
@@ -291,13 +313,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
omap->pdata = pdata;
omap->dm_timer = dm_timer;
-
- omap->dm_timer_pdev = of_find_device_by_node(timer);
- if (!omap->dm_timer_pdev) {
- dev_err(&pdev->dev, "Unable to find timer pdev\n");
- omap->pdata->free(dm_timer);
- return -EINVAL;
- }
+ omap->dm_timer_pdev = timer_pdev;
/*
* Ensure that the timer is stopped before we allow PWM core to call
@@ -322,11 +338,11 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
mutex_init(&omap->mutex);
- status = pwmchip_add(&omap->chip);
- if (status < 0) {
+ ret = pwmchip_add(&omap->chip);
+ if (ret < 0) {
dev_err(&pdev->dev, "failed to register PWM\n");
omap->pdata->free(omap->dm_timer);
- return status;
+ return ret;
}
platform_set_drvdata(pdev, omap);
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 09550b1da56d..3bbe6114a420 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -3,8 +3,8 @@ config SOC_RENESAS
default y if ARCH_RENESAS
select SOC_BUS
select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
- ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
- ARCH_R8A77995
+ ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77965 || \
+ ARCH_R8A77970 || ARCH_R8A77980 || ARCH_R8A77995
select SYSC_R8A7743 if ARCH_R8A7743
select SYSC_R8A7745 if ARCH_R8A7745
select SYSC_R8A7779 if ARCH_R8A7779
@@ -14,7 +14,9 @@ config SOC_RENESAS
select SYSC_R8A7794 if ARCH_R8A7794
select SYSC_R8A7795 if ARCH_R8A7795
select SYSC_R8A7796 if ARCH_R8A7796
+ select SYSC_R8A77965 if ARCH_R8A77965
select SYSC_R8A77970 if ARCH_R8A77970
+ select SYSC_R8A77980 if ARCH_R8A77980
select SYSC_R8A77995 if ARCH_R8A77995
if SOC_RENESAS
@@ -56,10 +58,18 @@ config SYSC_R8A7796
bool "R-Car M3-W System Controller support" if COMPILE_TEST
select SYSC_RCAR
+config SYSC_R8A77965
+ bool "R-Car M3-N System Controller support" if COMPILE_TEST
+ select SYSC_RCAR
+
config SYSC_R8A77970
bool "R-Car V3M System Controller support" if COMPILE_TEST
select SYSC_RCAR
+config SYSC_R8A77980
+ bool "R-Car V3H System Controller support" if COMPILE_TEST
+ select SYSC_RCAR
+
config SYSC_R8A77995
bool "R-Car D3 System Controller support" if COMPILE_TEST
select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 845d62a08ce1..ccb5ec57a262 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -12,7 +12,9 @@ obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o
obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o
obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o
obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77965) += r8a77965-sysc.o
obj-$(CONFIG_SYSC_R8A77970) += r8a77970-sysc.o
+obj-$(CONFIG_SYSC_R8A77980) += r8a77980-sysc.o
obj-$(CONFIG_SYSC_R8A77995) += r8a77995-sysc.o
# Family
diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c
new file mode 100644
index 000000000000..d7f7928e3c07
--- /dev/null
+++ b/drivers/soc/renesas/r8a77965-sysc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car M3-N System Controller
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77965_areas[] __initconst = {
+ { "always-on", 0, 0, R8A77965_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca57-scu", 0x1c0, 0, R8A77965_PD_CA57_SCU, R8A77965_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca57-cpu0", 0x80, 0, R8A77965_PD_CA57_CPU0, R8A77965_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca57-cpu1", 0x80, 1, R8A77965_PD_CA57_CPU1, R8A77965_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "cr7", 0x240, 0, R8A77965_PD_CR7, R8A77965_PD_ALWAYS_ON },
+ { "a3vc", 0x380, 0, R8A77965_PD_A3VC, R8A77965_PD_ALWAYS_ON },
+ { "a3vp", 0x340, 0, R8A77965_PD_A3VP, R8A77965_PD_ALWAYS_ON },
+ { "a2vc1", 0x3c0, 1, R8A77965_PD_A2VC1, R8A77965_PD_A3VC },
+ { "3dg-a", 0x100, 0, R8A77965_PD_3DG_A, R8A77965_PD_ALWAYS_ON },
+ { "3dg-b", 0x100, 1, R8A77965_PD_3DG_B, R8A77965_PD_3DG_A },
+ { "a3ir", 0x180, 0, R8A77965_PD_A3IR, R8A77965_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a77965_sysc_info __initconst = {
+ .areas = r8a77965_areas,
+ .num_areas = ARRAY_SIZE(r8a77965_areas),
+};
diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index 8c614164718e..caf894f193ed 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -25,12 +25,12 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = {
PD_CPU_NOCR },
{ "cr7", 0x240, 0, R8A77970_PD_CR7, R8A77970_PD_ALWAYS_ON },
{ "a3ir", 0x180, 0, R8A77970_PD_A3IR, R8A77970_PD_ALWAYS_ON },
- { "a2ir0", 0x400, 0, R8A77970_PD_A2IR0, R8A77970_PD_ALWAYS_ON },
- { "a2ir1", 0x400, 1, R8A77970_PD_A2IR1, R8A77970_PD_A2IR0 },
- { "a2ir2", 0x400, 2, R8A77970_PD_A2IR2, R8A77970_PD_A2IR0 },
- { "a2ir3", 0x400, 3, R8A77970_PD_A2IR3, R8A77970_PD_A2IR0 },
- { "a2sc0", 0x400, 4, R8A77970_PD_A2SC0, R8A77970_PD_ALWAYS_ON },
- { "a2sc1", 0x400, 5, R8A77970_PD_A2SC1, R8A77970_PD_A2SC0 },
+ { "a2ir0", 0x400, 0, R8A77970_PD_A2IR0, R8A77970_PD_A3IR },
+ { "a2ir1", 0x400, 1, R8A77970_PD_A2IR1, R8A77970_PD_A3IR },
+ { "a2ir2", 0x400, 2, R8A77970_PD_A2IR2, R8A77970_PD_A3IR },
+ { "a2ir3", 0x400, 3, R8A77970_PD_A2IR3, R8A77970_PD_A3IR },
+ { "a2sc0", 0x400, 4, R8A77970_PD_A2SC0, R8A77970_PD_A3IR },
+ { "a2sc1", 0x400, 5, R8A77970_PD_A2SC1, R8A77970_PD_A3IR },
};
const struct rcar_sysc_info r8a77970_sysc_info __initconst = {
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
new file mode 100644
index 000000000000..9265fb525ef3
--- /dev/null
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car V3H System Controller
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
+ { "always-on", 0, 0, R8A77980_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca53-scu", 0x140, 0, R8A77980_PD_CA53_SCU, R8A77980_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca53-cpu0", 0x200, 0, R8A77980_PD_CA53_CPU0, R8A77980_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu1", 0x200, 1, R8A77980_PD_CA53_CPU1, R8A77980_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu2", 0x200, 2, R8A77980_PD_CA53_CPU2, R8A77980_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu3", 0x200, 3, R8A77980_PD_CA53_CPU3, R8A77980_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "cr7", 0x240, 0, R8A77980_PD_CR7, R8A77980_PD_ALWAYS_ON },
+ { "a3ir", 0x180, 0, R8A77980_PD_A3IR, R8A77980_PD_ALWAYS_ON },
+ { "a2ir0", 0x400, 0, R8A77980_PD_A2IR0, R8A77980_PD_A3IR },
+ { "a2ir1", 0x400, 1, R8A77980_PD_A2IR1, R8A77980_PD_A3IR },
+ { "a2ir2", 0x400, 2, R8A77980_PD_A2IR2, R8A77980_PD_A3IR },
+ { "a2ir3", 0x400, 3, R8A77980_PD_A2IR3, R8A77980_PD_A3IR },
+ { "a2ir4", 0x400, 4, R8A77980_PD_A2IR4, R8A77980_PD_A3IR },
+ { "a2ir5", 0x400, 5, R8A77980_PD_A2IR5, R8A77980_PD_A3IR },
+ { "a2sc0", 0x400, 6, R8A77980_PD_A2SC0, R8A77980_PD_A3IR },
+ { "a2sc1", 0x400, 7, R8A77980_PD_A2SC1, R8A77980_PD_A3IR },
+ { "a2sc2", 0x400, 8, R8A77980_PD_A2SC2, R8A77980_PD_A3IR },
+ { "a2sc3", 0x400, 9, R8A77980_PD_A2SC3, R8A77980_PD_A3IR },
+ { "a2sc4", 0x400, 10, R8A77980_PD_A2SC4, R8A77980_PD_A3IR },
+ { "a2pd0", 0x400, 11, R8A77980_PD_A2PD0, R8A77980_PD_A3IR },
+ { "a2pd1", 0x400, 12, R8A77980_PD_A2PD1, R8A77980_PD_A3IR },
+ { "a2cn", 0x400, 13, R8A77980_PD_A2CN, R8A77980_PD_A3IR },
+ { "a3vip", 0x2c0, 0, R8A77980_PD_A3VIP, R8A77980_PD_ALWAYS_ON },
+ { "a3vip1", 0x300, 0, R8A77980_PD_A3VIP1, R8A77980_PD_A3VIP },
+ { "a3vip2", 0x280, 0, R8A77980_PD_A3VIP2, R8A77980_PD_A3VIP },
+};
+
+const struct rcar_sysc_info r8a77980_sysc_info __initconst = {
+ .areas = r8a77980_areas,
+ .num_areas = ARRAY_SIZE(r8a77980_areas),
+};
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 3316b028f231..8e9cb7996ab0 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -13,8 +13,18 @@
#include <linux/of_address.h>
#include <linux/soc/renesas/rcar-rst.h>
+#define WDTRSTCR_RESET 0xA55A0002
+#define WDTRSTCR 0x0054
+
+static int rcar_rst_enable_wdt_reset(void __iomem *base)
+{
+ iowrite32(WDTRSTCR_RESET, base + WDTRSTCR);
+ return 0;
+}
+
struct rst_config {
- unsigned int modemr; /* Mode Monitoring Register Offset */
+ unsigned int modemr; /* Mode Monitoring Register Offset */
+ int (*configure)(void *base); /* Platform specific configuration */
};
static const struct rst_config rcar_rst_gen1 __initconst = {
@@ -23,6 +33,11 @@ static const struct rst_config rcar_rst_gen1 __initconst = {
static const struct rst_config rcar_rst_gen2 __initconst = {
.modemr = 0x60,
+ .configure = rcar_rst_enable_wdt_reset,
+};
+
+static const struct rst_config rcar_rst_gen3 __initconst = {
+ .modemr = 0x60,
};
static const struct of_device_id rcar_rst_matches[] __initconst = {
@@ -38,11 +53,13 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
{ .compatible = "renesas,r8a7792-rst", .data = &rcar_rst_gen2 },
{ .compatible = "renesas,r8a7793-rst", .data = &rcar_rst_gen2 },
{ .compatible = "renesas,r8a7794-rst", .data = &rcar_rst_gen2 },
- /* R-Car Gen3 is handled like R-Car Gen2 */
- { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
- { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
- { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
- { .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
+ /* R-Car Gen3 */
+ { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
+ { .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
{ /* sentinel */ }
};
@@ -71,6 +88,14 @@ static int __init rcar_rst_init(void)
rcar_rst_base = base;
cfg = match->data;
saved_mode = ioread32(base + cfg->modemr);
+ if (cfg->configure) {
+ error = cfg->configure(base);
+ if (error) {
+ pr_warn("%pOF: Cannot run SoC specific configuration\n",
+ np);
+ goto out_put;
+ }
+ }
pr_debug("%pOF: MODE = 0x%08x\n", np, saved_mode);
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 52c25a5e2646..faf20e719361 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -254,7 +254,7 @@ finalize:
pm_genpd_init(genpd, gov, false);
}
-static const struct of_device_id rcar_sysc_matches[] = {
+static const struct of_device_id rcar_sysc_matches[] __initconst = {
#ifdef CONFIG_SYSC_R8A7743
{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
#endif
@@ -284,9 +284,15 @@ static const struct of_device_id rcar_sysc_matches[] = {
#ifdef CONFIG_SYSC_R8A7796
{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
#endif
+#ifdef CONFIG_SYSC_R8A77965
+ { .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info },
+#endif
#ifdef CONFIG_SYSC_R8A77970
{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
#endif
+#ifdef CONFIG_SYSC_R8A77980
+ { .compatible = "renesas,r8a77980-sysc", .data = &r8a77980_sysc_info },
+#endif
#ifdef CONFIG_SYSC_R8A77995
{ .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info },
#endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 9d9daf9eb91b..dcdc9ec8eba7 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -58,7 +58,9 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
extern const struct rcar_sysc_info r8a7794_sysc_info;
extern const struct rcar_sysc_info r8a7795_sysc_info;
extern const struct rcar_sysc_info r8a7796_sysc_info;
+extern const struct rcar_sysc_info r8a77965_sysc_info;
extern const struct rcar_sysc_info r8a77970_sysc_info;
+extern const struct rcar_sysc_info r8a77980_sysc_info;
extern const struct rcar_sysc_info r8a77995_sysc_info;
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 926b7fd6db2d..ea71c413c926 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -144,11 +144,21 @@ static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = {
.id = 0x52,
};
+static const struct renesas_soc soc_rcar_m3_n __initconst __maybe_unused = {
+ .family = &fam_rcar_gen3,
+ .id = 0x55,
+};
+
static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
.family = &fam_rcar_gen3,
.id = 0x54,
};
+static const struct renesas_soc soc_rcar_v3h __initconst __maybe_unused = {
+ .family = &fam_rcar_gen3,
+ .id = 0x56,
+};
+
static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = {
.family = &fam_rcar_gen3,
.id = 0x58,
@@ -209,9 +219,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
#ifdef CONFIG_ARCH_R8A7796
{ .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w },
#endif
+#ifdef CONFIG_ARCH_R8A77965
+ { .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n },
+#endif
#ifdef CONFIG_ARCH_R8A77970
{ .compatible = "renesas,r8a77970", .data = &soc_rcar_v3m },
#endif
+#ifdef CONFIG_ARCH_R8A77980
+ { .compatible = "renesas,r8a77980", .data = &soc_rcar_v3h },
+#endif
#ifdef CONFIG_ARCH_R8A77995
{ .compatible = "renesas,r8a77995", .data = &soc_rcar_d3 },
#endif
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 39e152abe6b9..92770d84a288 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -28,6 +28,15 @@ config KEYSTONE_NAVIGATOR_DMA
If unsure, say N.
+config AMX3_PM
+ tristate "AMx3 Power Management"
+ depends on SOC_AM33XX || SOC_AM43XX
+ depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM
+ help
+ Enable power management on AM335x and AM437x. Required for suspend to mem
+ and standby states on both AM335x and AM437x platforms and for deeper cpuidle
+ c-states on AM335x.
+
config WKUP_M3_IPC
tristate "TI AMx3 Wkup-M3 IPC Driver"
depends on WKUP_M3_RPROC
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 8e205287f120..a22edc0b258a 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss.o
knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
+obj-$(CONFIG_AMX3_PM) += pm33xx.o
obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
new file mode 100644
index 000000000000..652739c7f718
--- /dev/null
+++ b/drivers/soc/ti/pm33xx.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Power Management Routines
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Vaibhav Bedia, Dave Gerlach
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/genalloc.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/pm33xx.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/sram.h>
+#include <linux/suspend.h>
+#include <linux/ti-emif-sram.h>
+#include <linux/wkup_m3_ipc.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/system_misc.h>
+
+#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
+ (unsigned long)pm_sram->do_wfi)
+
+static int (*am33xx_do_wfi_sram)(unsigned long unused);
+static phys_addr_t am33xx_do_wfi_sram_phys;
+
+static struct gen_pool *sram_pool, *sram_pool_data;
+static unsigned long ocmcram_location, ocmcram_location_data;
+
+static struct am33xx_pm_platform_data *pm_ops;
+static struct am33xx_pm_sram_addr *pm_sram;
+
+static struct device *pm33xx_dev;
+static struct wkup_m3_ipc *m3_ipc;
+
+static u32 sram_suspend_address(unsigned long addr)
+{
+ return ((unsigned long)am33xx_do_wfi_sram +
+ AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
+}
+
+#ifdef CONFIG_SUSPEND
+static int am33xx_pm_suspend(suspend_state_t suspend_state)
+{
+ int i, ret = 0;
+
+ ret = pm_ops->soc_suspend((unsigned long)suspend_state,
+ am33xx_do_wfi_sram);
+
+ if (ret) {
+ dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
+ } else {
+ i = m3_ipc->ops->request_pm_status(m3_ipc);
+
+ switch (i) {
+ case 0:
+ dev_info(pm33xx_dev,
+ "PM: Successfully put all powerdomains to target state\n");
+ break;
+ case 1:
+ dev_err(pm33xx_dev,
+ "PM: Could not transition all powerdomains to target state\n");
+ ret = -1;
+ break;
+ default:
+ dev_err(pm33xx_dev,
+ "PM: CM3 returned unknown result = %d\n", i);
+ ret = -1;
+ }
+ }
+
+ return ret;
+}
+
+static int am33xx_pm_enter(suspend_state_t suspend_state)
+{
+ int ret = 0;
+
+ switch (suspend_state) {
+ case PM_SUSPEND_MEM:
+ case PM_SUSPEND_STANDBY:
+ ret = am33xx_pm_suspend(suspend_state);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int am33xx_pm_begin(suspend_state_t state)
+{
+ int ret = -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
+ break;
+ case PM_SUSPEND_STANDBY:
+ ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
+ break;
+ }
+
+ return ret;
+}
+
+static void am33xx_pm_end(void)
+{
+ m3_ipc->ops->finish_low_power(m3_ipc);
+}
+
+static int am33xx_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static const struct platform_suspend_ops am33xx_pm_ops = {
+ .begin = am33xx_pm_begin,
+ .end = am33xx_pm_end,
+ .enter = am33xx_pm_enter,
+ .valid = am33xx_pm_valid,
+};
+#endif /* CONFIG_SUSPEND */
+
+static void am33xx_pm_set_ipc_ops(void)
+{
+ u32 resume_address;
+ int temp;
+
+ temp = ti_emif_get_mem_type();
+ if (temp < 0) {
+ dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
+ return;
+ }
+ m3_ipc->ops->set_mem_type(m3_ipc, temp);
+
+ /* Physical resume address to be used by ROM code */
+ resume_address = am33xx_do_wfi_sram_phys +
+ *pm_sram->resume_offset + 0x4;
+
+ m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
+}
+
+static void am33xx_pm_free_sram(void)
+{
+ gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+ gen_pool_free(sram_pool_data, ocmcram_location_data,
+ sizeof(struct am33xx_pm_ro_sram_data));
+}
+
+/*
+ * Push the minimal suspend-resume code to SRAM
+ */
+static int am33xx_pm_alloc_sram(void)
+{
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
+ if (!np) {
+ np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+ if (!np) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
+ __func__);
+ return -ENODEV;
+ }
+ }
+
+ sram_pool = of_gen_pool_get(np, "pm-sram", 0);
+ if (!sram_pool) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
+ __func__);
+ ret = -ENODEV;
+ goto mpu_put_node;
+ }
+
+ sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
+ if (!sram_pool_data) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
+ __func__);
+ ret = -ENODEV;
+ goto mpu_put_node;
+ }
+
+ ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
+ if (!ocmcram_location) {
+ dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
+ __func__);
+ ret = -ENOMEM;
+ goto mpu_put_node;
+ }
+
+ ocmcram_location_data = gen_pool_alloc(sram_pool_data,
+ sizeof(struct emif_regs_amx3));
+ if (!ocmcram_location_data) {
+ dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
+ gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+ ret = -ENOMEM;
+ }
+
+mpu_put_node:
+ of_node_put(np);
+ return ret;
+}
+
+static int am33xx_push_sram_idle(void)
+{
+ struct am33xx_pm_ro_sram_data ro_sram_data;
+ int ret;
+ u32 table_addr, ro_data_addr;
+ void *copy_addr;
+
+ ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
+ ro_sram_data.amx3_pm_sram_data_phys =
+ gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
+
+ /* Save physical address to calculate resume offset during pm init */
+ am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
+ ocmcram_location);
+
+ am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
+ pm_sram->do_wfi,
+ *pm_sram->do_wfi_sz);
+ if (!am33xx_do_wfi_sram) {
+ dev_err(pm33xx_dev,
+ "PM: %s: am33xx_do_wfi copy to sram failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ table_addr =
+ sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
+ ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
+ if (ret) {
+ dev_dbg(pm33xx_dev,
+ "PM: %s: EMIF function copy failed\n", __func__);
+ return -EPROBE_DEFER;
+ }
+
+ ro_data_addr =
+ sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
+ copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
+ &ro_sram_data,
+ sizeof(ro_sram_data));
+ if (!copy_addr) {
+ dev_err(pm33xx_dev,
+ "PM: %s: ro_sram_data copy to sram failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int am33xx_pm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (!of_machine_is_compatible("ti,am33xx") &&
+ !of_machine_is_compatible("ti,am43"))
+ return -ENODEV;
+
+ pm_ops = dev->platform_data;
+ if (!pm_ops) {
+ dev_err(dev, "PM: Cannot get core PM ops!\n");
+ return -ENODEV;
+ }
+
+ pm_sram = pm_ops->get_sram_addrs();
+ if (!pm_sram) {
+ dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
+ return -ENODEV;
+ }
+
+ pm33xx_dev = dev;
+
+ ret = am33xx_pm_alloc_sram();
+ if (ret)
+ return ret;
+
+ ret = am33xx_push_sram_idle();
+ if (ret)
+ goto err_free_sram;
+
+ m3_ipc = wkup_m3_ipc_get();
+ if (!m3_ipc) {
+ dev_dbg(dev, "PM: Cannot get wkup_m3_ipc handle\n");
+ ret = -EPROBE_DEFER;
+ goto err_free_sram;
+ }
+
+ am33xx_pm_set_ipc_ops();
+
+#ifdef CONFIG_SUSPEND
+ suspend_set_ops(&am33xx_pm_ops);
+#endif /* CONFIG_SUSPEND */
+
+ ret = pm_ops->init();
+ if (ret) {
+ dev_err(dev, "Unable to call core pm init!\n");
+ ret = -ENODEV;
+ goto err_put_wkup_m3_ipc;
+ }
+
+ return 0;
+
+err_put_wkup_m3_ipc:
+ wkup_m3_ipc_put(m3_ipc);
+err_free_sram:
+ am33xx_pm_free_sram();
+ pm33xx_dev = NULL;
+ return ret;
+}
+
+static int am33xx_pm_remove(struct platform_device *pdev)
+{
+ suspend_set_ops(NULL);
+ wkup_m3_ipc_put(m3_ipc);
+ am33xx_pm_free_sram();
+ return 0;
+}
+
+static struct platform_driver am33xx_pm_driver = {
+ .driver = {
+ .name = "pm33xx",
+ },
+ .probe = am33xx_pm_probe,
+ .remove = am33xx_pm_remove,
+};
+module_platform_driver(am33xx_pm_driver);
+
+MODULE_ALIAS("platform:pm33xx");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("am33xx power management driver");
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/include/clocksource/timer-ti-dm.h
index dd79f3005cdf..7d9598dc578d 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/plat/dmtimer.h
- *
* OMAP Dual-Mode Timers
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
@@ -36,8 +34,8 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
+#ifndef __CLOCKSOURCE_DMTIMER_H
+#define __CLOCKSOURCE_DMTIMER_H
/* clock sources */
#define OMAP_TIMER_SRC_SYS_CLK 0x00
@@ -75,10 +73,6 @@
*/
#define OMAP_TIMER_ERRATA_I103_I767 0x80000000
-struct omap_timer_capability_dev_attr {
- u32 timer_capability;
-};
-
struct timer_regs {
u32 tidr;
u32 tier;
@@ -125,37 +119,13 @@ struct omap_dm_timer {
};
int omap_dm_timer_reserve_systimer(int id);
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
-struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np);
-int omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
int omap_dm_timer_trigger(struct omap_dm_timer *timer);
-int omap_dm_timer_start(struct omap_dm_timer *timer);
-int omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
@@ -276,6 +246,12 @@ int omap_dm_timers_active(void);
#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+/*
+ * The below are inlined to optimize code size for system timers. Other code
+ * should not need these at all, see
+ * include/linux/platform_data/pwm_omap_dmtimer.h
+ */
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
@@ -414,5 +390,5 @@ static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
{
writel_relaxed(value, timer->irq_stat);
}
-
-#endif /* __ASM_ARCH_DMTIMER_H */
+#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
+#endif /* __CLOCKSOURCE_DMTIMER_H */
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
new file mode 100644
index 000000000000..05a4b5917314
--- /dev/null
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#ifndef __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77965_PD_CA57_CPU0 0
+#define R8A77965_PD_CA57_CPU1 1
+#define R8A77965_PD_A3VP 9
+#define R8A77965_PD_CA57_SCU 12
+#define R8A77965_PD_CR7 13
+#define R8A77965_PD_A3VC 14
+#define R8A77965_PD_3DG_A 17
+#define R8A77965_PD_3DG_B 18
+#define R8A77965_PD_A3IR 24
+#define R8A77965_PD_A2VC1 26
+
+/* Always-on power area */
+#define R8A77965_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A77965_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a77980-sysc.h b/include/dt-bindings/power/r8a77980-sysc.h
new file mode 100644
index 000000000000..2c90c1237725
--- /dev/null
+++ b/include/dt-bindings/power/r8a77980-sysc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77980_PD_A2SC2 0
+#define R8A77980_PD_A2SC3 1
+#define R8A77980_PD_A2SC4 2
+#define R8A77980_PD_A2PD0 3
+#define R8A77980_PD_A2PD1 4
+#define R8A77980_PD_CA53_CPU0 5
+#define R8A77980_PD_CA53_CPU1 6
+#define R8A77980_PD_CA53_CPU2 7
+#define R8A77980_PD_CA53_CPU3 8
+#define R8A77980_PD_A2CN 10
+#define R8A77980_PD_A3VIP 11
+#define R8A77980_PD_A2IR5 12
+#define R8A77980_PD_CR7 13
+#define R8A77980_PD_A2IR4 15
+#define R8A77980_PD_CA53_SCU 21
+#define R8A77980_PD_A2IR0 23
+#define R8A77980_PD_A3IR 24
+#define R8A77980_PD_A3VIP1 25
+#define R8A77980_PD_A3VIP2 26
+#define R8A77980_PD_A2IR1 27
+#define R8A77980_PD_A2IR2 28
+#define R8A77980_PD_A2IR3 29
+#define R8A77980_PD_A2SC0 30
+#define R8A77980_PD_A2SC1 31
+
+/* Always-on power area */
+#define R8A77980_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A77980_SYSC_H__ */
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d18da839b810..7e3bceee3489 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -203,6 +203,7 @@ enum {
TI_CLKM_PRM,
TI_CLKM_SCRM,
TI_CLKM_CTRL,
+ TI_CLKM_CTRL_AUX,
TI_CLKM_PLLSS,
CLK_MAX_MEMMAPS
};
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index e684543254f3..e319d0a2ec82 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -25,10 +25,6 @@
#include <linux/spinlock.h>
#include <linux/clk.h>
-#define MCBSP_CONFIG_TYPE2 0x2
-#define MCBSP_CONFIG_TYPE3 0x3
-#define MCBSP_CONFIG_TYPE4 0x4
-
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
@@ -47,14 +43,6 @@ struct omap_mcbsp_platform_data {
int (*force_ick_on)(struct clk *clk, bool force_on);
};
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
- const char *sidetone;
-};
-
void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
#endif
diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h
index a19b78d826e9..757a0f9e26f9 100644
--- a/include/linux/platform_data/dmtimer-omap.h
+++ b/include/linux/platform_data/dmtimer-omap.h
@@ -20,12 +20,50 @@
#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__
#define __PLATFORM_DATA_DMTIMER_OMAP_H__
+struct omap_dm_timer_ops {
+ struct omap_dm_timer *(*request_by_node)(struct device_node *np);
+ struct omap_dm_timer *(*request_specific)(int timer_id);
+ struct omap_dm_timer *(*request)(void);
+
+ int (*free)(struct omap_dm_timer *timer);
+
+ void (*enable)(struct omap_dm_timer *timer);
+ void (*disable)(struct omap_dm_timer *timer);
+
+ int (*get_irq)(struct omap_dm_timer *timer);
+ int (*set_int_enable)(struct omap_dm_timer *timer,
+ unsigned int value);
+ int (*set_int_disable)(struct omap_dm_timer *timer, u32 mask);
+
+ struct clk *(*get_fclk)(struct omap_dm_timer *timer);
+
+ int (*start)(struct omap_dm_timer *timer);
+ int (*stop)(struct omap_dm_timer *timer);
+ int (*set_source)(struct omap_dm_timer *timer, int source);
+
+ int (*set_load)(struct omap_dm_timer *timer, int autoreload,
+ unsigned int value);
+ int (*set_match)(struct omap_dm_timer *timer, int enable,
+ unsigned int match);
+ int (*set_pwm)(struct omap_dm_timer *timer, int def_on,
+ int toggle, int trigger);
+ int (*set_prescaler)(struct omap_dm_timer *timer, int prescaler);
+
+ unsigned int (*read_counter)(struct omap_dm_timer *timer);
+ int (*write_counter)(struct omap_dm_timer *timer,
+ unsigned int value);
+ unsigned int (*read_status)(struct omap_dm_timer *timer);
+ int (*write_status)(struct omap_dm_timer *timer,
+ unsigned int value);
+};
+
struct dmtimer_platform_data {
/* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
u32 timer_capability;
u32 timer_errata;
int (*get_context_loss_count)(struct device *);
+ const struct omap_dm_timer_ops *timer_ops;
};
#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index cb2618147c34..8612855691b2 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -157,11 +157,6 @@
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
-struct omap_gpio_dev_attr {
- int bank_width; /* GPIO bank width */
- bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
-};
-
struct omap_gpio_reg_offs {
u16 revision;
u16 direction;
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index b42ad83cbc20..4fd0f592a2d2 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -6,41 +6,22 @@
#include <linux/mtd/partitions.h>
/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
+ * Current pxa3xx_nand controller has two chip select which both be workable but
+ * historically all platforms remaining on platform data used only one. Switch
+ * to device tree if you need more.
*/
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT (2)
struct pxa3xx_nand_platform_data {
-
- /* the data flash bus is shared between the Static Memory
- * Controller and the Data Flash Controller, the arbiter
- * controls the ownership of the bus
- */
- int enable_arbiter;
-
- /* allow platform code to keep OBM/bootloader defined NFC config */
- int keep_config;
-
- /* indicate how many chip selects will be used */
- int num_cs;
-
- /* use an flash-based bad block table */
- bool flash_bbt;
-
- /* requested ECC strength and ECC step size */
+ /* Keep OBM/bootloader NFC timing configuration */
+ bool keep_config;
+ /* Use a flash-based bad block table */
+ bool flash_bbt;
+ /* Requested ECC strength and ECC step size */
int ecc_strength, ecc_step_size;
-
- const struct mtd_partition *parts[NUM_CHIP_SELECT];
- unsigned int nr_parts[NUM_CHIP_SELECT];
+ /* Partitions */
+ const struct mtd_partition *parts;
+ unsigned int nr_parts;
};
extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+
#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/linux/platform_data/phy-da8xx-usb.h b/include/linux/platform_data/phy-da8xx-usb.h
new file mode 100644
index 000000000000..85c2b99381b2
--- /dev/null
+++ b/include/linux/platform_data/phy-da8xx-usb.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2018 David Lechner <david@lechnology.com>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+#define __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+
+#include <linux/regmap.h>
+
+/**
+ * da8xx_usb_phy_platform_data
+ * @cfgchip: CFGCHIP syscon regmap
+ */
+struct da8xx_usb_phy_platform_data {
+ struct regmap *cfgchip;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__ */
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
new file mode 100644
index 000000000000..f9bed2a0af9d
--- /dev/null
+++ b/include/linux/platform_data/pm33xx.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI pm33xx platform data
+ *
+ * Copyright (C) 2016-2018 Texas Instruments, Inc.
+ * Dave Gerlach <d-gerlach@ti.com>
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_PM33XX_H
+#define _LINUX_PLATFORM_DATA_PM33XX_H
+
+#include <linux/kbuild.h>
+#include <linux/types.h>
+
+#ifndef __ASSEMBLER__
+struct am33xx_pm_sram_addr {
+ void (*do_wfi)(void);
+ unsigned long *do_wfi_sz;
+ unsigned long *resume_offset;
+ unsigned long *emif_sram_table;
+ unsigned long *ro_sram_data;
+};
+
+struct am33xx_pm_platform_data {
+ int (*init)(void);
+ int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long));
+ struct am33xx_pm_sram_addr *(*get_sram_addrs)(void);
+};
+
+struct am33xx_pm_sram_data {
+ u32 wfi_flags;
+ u32 l2_aux_ctrl_val;
+ u32 l2_prefetch_ctrl_val;
+} __packed __aligned(8);
+
+struct am33xx_pm_ro_sram_data {
+ u32 amx3_pm_sram_data_virt;
+ u32 amx3_pm_sram_data_phys;
+} __packed __aligned(8);
+
+#endif /* __ASSEMBLER__ */
+#endif /* _LINUX_PLATFORM_DATA_PM33XX_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index 13c83a25958a..0bf9fddb8306 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -2,10 +2,6 @@
#ifndef _OMAP2_MCSPI_H
#define _OMAP2_MCSPI_H
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
#define OMAP4_MCSPI_REG_OFFSET 0x100
#define MCSPI_PINDIR_D0_IN_D1_OUT 0
@@ -17,10 +13,6 @@ struct omap2_mcspi_platform_config {
unsigned int pin_dir:1;
};
-struct omap2_mcspi_dev_attr {
- unsigned short num_chipselect;
-};
-
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 1be356330b96..80ce28d40832 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -16,6 +16,10 @@ enum ti_sysc_module_type {
TI_SYSC_OMAP4_USB_HOST_FS,
};
+struct ti_sysc_cookie {
+ void *data;
+};
+
/**
* struct sysc_regbits - TI OCP_SYSCONFIG register field offsets
* @midle_shift: Offset of the midle bit
@@ -41,6 +45,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
+#define SYSC_QUIRK_LEGACY_IDLE BIT(8)
#define SYSC_QUIRK_RESET_STATUS BIT(7)
#define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6)
#define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5)
@@ -83,4 +88,49 @@ struct sysc_config {
u32 quirks;
};
+enum sysc_registers {
+ SYSC_REVISION,
+ SYSC_SYSCONFIG,
+ SYSC_SYSSTATUS,
+ SYSC_MAX_REGS,
+};
+
+/**
+ * struct ti_sysc_module_data - ti-sysc to hwmod translation data for a module
+ * @name: legacy "ti,hwmods" module name
+ * @module_pa: physical address of the interconnect target module
+ * @module_size: size of the interconnect target module
+ * @offsets: array of register offsets as listed in enum sysc_registers
+ * @nr_offsets: number of registers
+ * @cap: interconnect target module capabilities
+ * @cfg: interconnect target module configuration
+ *
+ * This data is enough to allocate a new struct omap_hwmod_class_sysconfig
+ * based on device tree data parsed by ti-sysc driver.
+ */
+struct ti_sysc_module_data {
+ const char *name;
+ u64 module_pa;
+ u32 module_size;
+ int *offsets;
+ int nr_offsets;
+ const struct sysc_capabilities *cap;
+ struct sysc_config *cfg;
+};
+
+struct device;
+
+struct ti_sysc_platform_data {
+ struct of_dev_auxdata *auxdata;
+ int (*init_module)(struct device *dev,
+ const struct ti_sysc_module_data *data,
+ struct ti_sysc_cookie *cookie);
+ int (*enable_module)(struct device *dev,
+ const struct ti_sysc_cookie *cookie);
+ int (*idle_module)(struct device *dev,
+ const struct ti_sysc_cookie *cookie);
+ int (*shutdown_module)(struct device *dev,
+ const struct ti_sysc_cookie *cookie);
+};
+
#endif /* __TI_SYSC_DATA_H__ */
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index d8b187c3925d..7b81dad712de 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -143,6 +143,13 @@
#define OMAP3430_SR_ERRWEIGHT 0x04
#define OMAP3430_SR_ERRMAXLIMIT 0x02
+enum sr_instance {
+ OMAP_SR_MPU, /* shared with iva on omap3 */
+ OMAP_SR_CORE,
+ OMAP_SR_IVA,
+ OMAP_SR_NR,
+};
+
struct omap_sr {
char *name;
struct list_head node;
@@ -207,7 +214,6 @@ struct omap_smartreflex_dev_attr {
const char *sensor_voltdm_name;
};
-#ifdef CONFIG_POWER_AVS_OMAP
/*
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
* The smartreflex class driver should pass the class type.
@@ -290,6 +296,8 @@ struct omap_sr_data {
struct voltagedomain *voltdm;
};
+#ifdef CONFIG_POWER_AVS_OMAP
+
/* Smartreflex module enable/disable interface */
void omap_sr_enable(struct voltagedomain *voltdm);
void omap_sr_disable(struct voltagedomain *voltdm);
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index a7f004a3c177..463ed28d2b27 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Internal header file for Samsung S3C2410 serial ports (UART0-2)
*
@@ -10,21 +11,7 @@
* Internal header file for MX1ADS serial ports (UART1 & 2)
*
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
+ */
#ifndef __ASM_ARM_REGS_SERIAL_H
#define __ASM_ARM_REGS_SERIAL_H