summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohan Hovold <johan+linaro@kernel.org>2022-06-09 15:03:38 +0300
committerVinod Koul <vkoul@kernel.org>2022-07-05 10:12:32 +0300
commitfe841d5ba7541b828bad98c2b9fa830e9078c575 (patch)
treed79a6d944c0c6e8928fa8a2d27c77ab17d164ac0
parentb46ae21d0ab6ba1eff6945cb4c128a60290d2ca9 (diff)
downloadlinux-fe841d5ba7541b828bad98c2b9fa830e9078c575.tar.xz
phy: qcom-qmp: clean up hex defines
Use lower case hex consistently for define values. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.h16
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index c11eee54e01f..f4ee5884c076 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -30,7 +30,7 @@
#define QSERDES_PLL_CP_CTRL_MODE0 0x080
#define QSERDES_PLL_CP_CTRL_MODE1 0x084
#define QSERDES_PLL_PLL_RCTRL_MODE0 0x088
-#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08C
+#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08c
#define QSERDES_PLL_PLL_CCTRL_MODE0 0x090
#define QSERDES_PLL_PLL_CCTRL_MODE1 0x094
#define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM 0x0a4
@@ -44,7 +44,7 @@
#define QSERDES_PLL_DIV_FRAC_START3_MODE0 0x0e0
#define QSERDES_PLL_DIV_FRAC_START1_MODE1 0x0e4
#define QSERDES_PLL_DIV_FRAC_START2_MODE1 0x0e8
-#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0eC
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0ec
#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0 0x100
#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0 0x104
#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1 0x108
@@ -270,11 +270,11 @@
#define QPHY_RX_MIN_HIBERN8_TIME 0x140
#define QPHY_RX_SIGDET_CTRL2 0x148
#define QPHY_RX_PWM_GEAR_BAND 0x154
-#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8
-#define QPHY_OSC_DTCT_ACTIONS 0x1AC
-#define QPHY_RX_SIGDET_LVL 0x1D8
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1a8
+#define QPHY_OSC_DTCT_ACTIONS 0x1ac
+#define QPHY_RX_SIGDET_LVL 0x1d8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
@@ -639,7 +639,7 @@
#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
#define QSERDES_V4_TX_TX_INTERFACE_MODE 0xbc
#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
-#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdc
#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0
#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4
#define QSERDES_V4_TX_VMODE_CTRL1 0xe8