summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-09-05 01:17:28 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2023-09-05 01:17:28 +0300
commit0ca4080a884329759a08c76f0aeabe3d24350c62 (patch)
tree175342bb5117be8d4d5351dce69f380fb82ddb49
parent2a3a850ed008dba2cb9707c65c5726efcfc72449 (diff)
parent8289d810ea85755a9d22f75785806cb34eecd5e5 (diff)
downloadlinux-0ca4080a884329759a08c76f0aeabe3d24350c62.tar.xz
Merge tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki: "These are mostly updates of thermal control drivers for ARM platforms, new thermal control support for Loongson-2 and a couple of core cleanups made possible by recent changes merged previously. Specifics: - Check if the Tegra BPMP supports the trip points in order to set the .set_trips callback (Mikko Perttunen) - Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo Zhu) - Use IS_ERR_OR_NULL() helper to replace a double test on the TI bandgap sensor (Li Zetao) - Remove redundant platform_set_drvdata() calls, as there are no corresponding calls to platform_get_drvdata(), from a bunch of drivers (Andrei Coardos) - Switch the Mediatek LVTS mode to filtered in order to enable interrupts (NĂ­colas F. R. A. Prado) - Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof Kozlowski) - Remove redundant dev_err_probe(), because the underlying function already called it, from the Mediatek sensor (Chen Jiahao) - Free calibration nvmem after reading it on sun8i (Mark Brown) - Remove useless comment from the sun8i driver (Yangtao Li) - Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens (Min-Hua Chen) - Remove error message at probe deferral on imx8mm (Ahmad Fatoum) - Fix parameter check in lvts_debugfs_init() with IS_ERR() on Mediatek LVTS (Minjie Du) - Fix interrupt routine and configuratoin for Mediatek LVTS (NĂ­colas F. R. A. Prado) - Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst() thermal zone callbacks from the core and rework the .get_trend() one to take a trip point pointer as an argument (Rafael Wysocki)" * tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: Rework .get_trend() thermal zone callback thermal: core: Drop unused .get_trip_*() callbacks thermal/drivers/tegra-bpmp: Check if BPMP supports trip points thermal: dt-bindings: add loongson-2 thermal thermal/drivers/loongson-2: Add thermal management support thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL() thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata() thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata() thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata() thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata() thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata() thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata() thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata() thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata() thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning thermal/drivers/db8500: Remove redundant of_match_ptr() thermal/drivers/mediatek: Clean up redundant dev_err_probe() thermal/drivers/sun8i: Free calibration nvmem after reading it thermal/drivers/sun8i: Remove unneeded comments ...
-rw-r--r--Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml44
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/acpi/thermal.c41
-rw-r--r--drivers/thermal/Kconfig12
-rw-r--r--drivers/thermal/Makefile1
-rw-r--r--drivers/thermal/broadcom/brcmstb_thermal.c1
-rw-r--r--drivers/thermal/broadcom/sr-thermal.c1
-rw-r--r--drivers/thermal/db8500_thermal.c2
-rw-r--r--drivers/thermal/imx8mm_thermal.c6
-rw-r--r--drivers/thermal/k3_bandgap.c1
-rw-r--r--drivers/thermal/k3_j72xx_bandgap.c2
-rw-r--r--drivers/thermal/loongson2_thermal.c169
-rw-r--r--drivers/thermal/max77620_thermal.c2
-rw-r--r--drivers/thermal/mediatek/auxadc_thermal.c2
-rw-r--r--drivers/thermal/mediatek/lvts_thermal.c175
-rw-r--r--drivers/thermal/qcom/tsens-v0_1.c6
-rw-r--r--drivers/thermal/qcom/tsens-v1.c2
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c2
-rw-r--r--drivers/thermal/sun8i_thermal.c8
-rw-r--r--drivers/thermal/tegra/tegra-bpmp-thermal.c52
-rw-r--r--drivers/thermal/thermal-generic-adc.c1
-rw-r--r--drivers/thermal/thermal_core.c2
-rw-r--r--drivers/thermal/thermal_core.h2
-rw-r--r--drivers/thermal/thermal_helpers.c3
-rw-r--r--drivers/thermal/thermal_trip.c24
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-bandgap.c2
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c3
-rw-r--r--include/linux/thermal.h34
28 files changed, 468 insertions, 140 deletions
diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
new file mode 100644
index 000000000000..7538469997f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/loongson,ls2k-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensors on Loongson-2 SoCs
+
+maintainers:
+ - zhanghongchen <zhanghongchen@loongson.cn>
+ - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - loongson,ls2k1000-thermal
+ - items:
+ - enum:
+ - loongson,ls2k2000-thermal
+ - const: loongson,ls2k1000-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ thermal: thermal-sensor@1fe01500 {
+ compatible = "loongson,ls2k1000-thermal";
+ reg = <0x1fe01500 0x30>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index d68f5c615d32..9c186c214c54 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12390,6 +12390,14 @@ S: Maintained
F: Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
F: drivers/pinctrl/pinctrl-loongson2.c
+LOONGSON-2 SOC SERIES THERMAL DRIVER
+M: zhanghongchen <zhanghongchen@loongson.cn>
+M: Yinbo Zhu <zhuyinbo@loongson.cn>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+F: drivers/thermal/loongson2_thermal.c
+
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
M: Sathya Prakash <sathya.prakash@broadcom.com>
M: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 419590f41ed5..f14e68266ccd 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -492,26 +492,22 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
}
static int thermal_get_trend(struct thermal_zone_device *thermal,
- int trip_index, enum thermal_trend *trend)
+ struct thermal_trip *trip,
+ enum thermal_trend *trend)
{
struct acpi_thermal *tz = thermal_zone_device_priv(thermal);
struct acpi_thermal_trip *acpi_trip;
- int t, i;
+ int t;
- if (!tz || trip_index < 0)
+ if (!tz || !trip)
return -EINVAL;
- if (tz->trips.critical.valid)
- trip_index--;
-
- if (tz->trips.hot.valid)
- trip_index--;
-
- if (trip_index < 0)
+ acpi_trip = trip->priv;
+ if (!acpi_trip || !acpi_trip->valid)
return -EINVAL;
- acpi_trip = &tz->trips.passive.trip;
- if (acpi_trip->valid && !trip_index--) {
+ switch (trip->type) {
+ case THERMAL_TRIP_PASSIVE:
t = tz->trips.passive.tc1 * (tz->temperature -
tz->last_temperature) +
tz->trips.passive.tc2 * (tz->temperature -
@@ -524,19 +520,18 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
*trend = THERMAL_TREND_STABLE;
return 0;
- }
-
- t = acpi_thermal_temp(tz, tz->temperature);
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- acpi_trip = &tz->trips.active[i].trip;
- if (acpi_trip->valid && !trip_index--) {
- if (t > acpi_thermal_temp(tz, acpi_trip->temperature)) {
- *trend = THERMAL_TREND_RAISING;
- return 0;
- }
+ case THERMAL_TRIP_ACTIVE:
+ t = acpi_thermal_temp(tz, tz->temperature);
+ if (t <= trip->temperature)
break;
- }
+
+ *trend = THERMAL_TREND_RAISING;
+
+ return 0;
+
+ default:
+ break;
}
return -EINVAL;
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 19a4b33cb564..c81a00fbca7d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -510,4 +510,16 @@ config KHADAS_MCU_FAN_THERMAL
If you say yes here you get support for the FAN controlled
by the Microcontroller found on the Khadas VIM boards.
+config LOONGSON2_THERMAL
+ tristate "Loongson-2 SoC series thermal driver"
+ depends on LOONGARCH || COMPILE_TEST
+ depends on OF
+ help
+ Support for Thermal driver found on Loongson-2 SoC series platforms.
+ The thermal driver realizes get_temp and set_trips function, which
+ are used to obtain the temperature of the current node and set the
+ temperature range to trigger the interrupt. When the input temperature
+ is higher than the high temperature threshold or lower than the low
+ temperature threshold, the interrupt will occur.
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 058664bc3ec0..c934cab309ae 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -63,3 +63,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o
+obj-$(CONFIG_LOONGSON2_THERMAL) += loongson2_thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 0b73abdaa792..9674e5ffcfa2 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -334,7 +334,6 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
return PTR_ERR(priv->tmon_base);
priv->dev = &pdev->dev;
- platform_set_drvdata(pdev, priv);
of_ops = priv->temp_params->of_ops;
thermal = devm_thermal_of_zone_register(&pdev->dev, 0, priv,
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
index 747915890022..9a29dfd4c7fe 100644
--- a/drivers/thermal/broadcom/sr-thermal.c
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -91,7 +91,6 @@ static int sr_thermal_probe(struct platform_device *pdev)
dev_dbg(dev, "thermal sensor %d registered\n", i);
}
- platform_set_drvdata(pdev, sr_thermal);
return 0;
}
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index fca5c2c93bf9..576f88b6a1b3 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -229,7 +229,7 @@ MODULE_DEVICE_TABLE(of, db8500_thermal_match);
static struct platform_driver db8500_thermal_driver = {
.driver = {
.name = "db8500-thermal",
- .of_match_table = of_match_ptr(db8500_thermal_match),
+ .of_match_table = db8500_thermal_match,
},
.probe = db8500_thermal_probe,
.suspend = db8500_thermal_suspend,
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index e89b11b3f2b9..14111ccf6e4c 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -178,10 +178,8 @@ static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev,
int ret;
ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0);
- if (ret) {
- dev_warn(dev, "Failed to read OCOTP nvmem cell (%d).\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read OCOTP nvmem cell\n");
writel(FIELD_PREP(TASR_BUF_VREF_MASK,
FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) |
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
index 68f59b3735d3..4a918c1e92f9 100644
--- a/drivers/thermal/k3_bandgap.c
+++ b/drivers/thermal/k3_bandgap.c
@@ -225,7 +225,6 @@ static int k3_bandgap_probe(struct platform_device *pdev)
devm_thermal_add_hwmon_sysfs(dev, data[id].tzd);
}
- platform_set_drvdata(pdev, bgp);
return 0;
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index a5a0fc9b9356..2fc799b07b90 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -502,8 +502,6 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
K3_VTM_MISC_CTRL_OFFSET);
- platform_set_drvdata(pdev, bgp);
-
print_look_up_table(dev, ref_table);
/*
* Now that the derived_table has the appropriate look up values
diff --git a/drivers/thermal/loongson2_thermal.c b/drivers/thermal/loongson2_thermal.c
new file mode 100644
index 000000000000..133098dc0854
--- /dev/null
+++ b/drivers/thermal/loongson2_thermal.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Author: zhanghongchen <zhanghongchen@loongson.cn>
+ * Yinbo Zhu <zhuyinbo@loongson.cn>
+ * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+#include "thermal_hwmon.h"
+
+#define LOONGSON2_MAX_SENSOR_SEL_NUM 3
+
+#define LOONGSON2_THSENS_CTRL_HI_REG 0x0
+#define LOONGSON2_THSENS_CTRL_LOW_REG 0x8
+#define LOONGSON2_THSENS_STATUS_REG 0x10
+#define LOONGSON2_THSENS_OUT_REG 0x14
+
+#define LOONGSON2_THSENS_INT_LO BIT(0)
+#define LOONGSON2_THSENS_INT_HIGH BIT(1)
+#define LOONGSON2_THSENS_OUT_MASK 0xFF
+
+struct loongson2_thermal_chip_data {
+ unsigned int thermal_sensor_sel;
+};
+
+struct loongson2_thermal_data {
+ void __iomem *regs;
+ const struct loongson2_thermal_chip_data *chip_data;
+};
+
+static int loongson2_thermal_set(struct loongson2_thermal_data *data,
+ int low, int high, bool enable)
+{
+ u64 reg_ctrl = 0;
+ int reg_off = data->chip_data->thermal_sensor_sel * 2;
+
+ low = clamp(-40, low, high);
+ high = clamp(125, low, high);
+
+ low += HECTO;
+ high += HECTO;
+
+ reg_ctrl = low;
+ reg_ctrl |= enable ? 0x100 : 0;
+ writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off);
+
+ reg_ctrl = high;
+ reg_ctrl |= enable ? 0x100 : 0;
+ writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off);
+
+ return 0;
+}
+
+static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ u32 reg_val;
+ struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
+
+ reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
+ *temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
+
+ return 0;
+}
+
+static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
+{
+ struct thermal_zone_device *tzd = dev;
+ struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
+
+ writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
+ LOONGSON2_THSENS_STATUS_REG);
+
+ thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
+
+ return IRQ_HANDLED;
+}
+
+static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+ struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
+
+ return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
+}
+
+static const struct thermal_zone_device_ops loongson2_of_thermal_ops = {
+ .get_temp = loongson2_thermal_get_temp,
+ .set_trips = loongson2_thermal_set_trips,
+};
+
+static int loongson2_thermal_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct loongson2_thermal_data *data;
+ struct thermal_zone_device *tzd;
+ int ret, irq, i;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->chip_data = device_get_match_data(dev);
+
+ data->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->regs))
+ return PTR_ERR(data->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
+ LOONGSON2_THSENS_STATUS_REG);
+
+ loongson2_thermal_set(data, 0, 0, false);
+
+ for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
+ tzd = devm_thermal_of_zone_register(dev, i, data,
+ &loongson2_of_thermal_ops);
+
+ if (!IS_ERR(tzd))
+ break;
+
+ if (PTR_ERR(tzd) != ENODEV)
+ continue;
+
+ return dev_err_probe(dev, PTR_ERR(tzd), "failed to register");
+ }
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
+ IRQF_ONESHOT, "loongson2_thermal", tzd);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to request alarm irq\n");
+
+ devm_thermal_add_hwmon_sysfs(dev, tzd);
+
+ return 0;
+}
+
+static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
+ .thermal_sensor_sel = 0,
+};
+
+static const struct of_device_id of_loongson2_thermal_match[] = {
+ {
+ .compatible = "loongson,ls2k1000-thermal",
+ .data = &loongson2_thermal_ls2k1000_data,
+ },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
+
+static struct platform_driver loongson2_thermal_driver = {
+ .driver = {
+ .name = "loongson2_thermal",
+ .of_match_table = of_loongson2_thermal_match,
+ },
+ .probe = loongson2_thermal_probe,
+};
+module_platform_driver(loongson2_thermal_driver);
+
+MODULE_DESCRIPTION("Loongson2 thermal driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
index 61c7622d9945..919b6ee208d8 100644
--- a/drivers/thermal/max77620_thermal.c
+++ b/drivers/thermal/max77620_thermal.c
@@ -139,8 +139,6 @@ static int max77620_thermal_probe(struct platform_device *pdev)
return ret;
}
- platform_set_drvdata(pdev, mtherm);
-
return 0;
}
diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
index c537aed71017..843214d30bd8 100644
--- a/drivers/thermal/mediatek/auxadc_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -1282,8 +1282,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
mtk_thermal_init_bank(mt, i, apmixed_phys_base,
auxadc_phys_base, ctrl_id);
- platform_set_drvdata(pdev, mt);
-
tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
&mtk_thermal_ops);
if (IS_ERR(tzdev))
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 054c965ae5e1..effd9b00a424 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -58,14 +58,19 @@
#define LVTS_PROTTC(__base) (__base + 0x00CC)
#define LVTS_CLKEN(__base) (__base + 0x00E4)
-#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38))
-#define LVTS_GROUP_INTERVAL 1
-#define LVTS_FILTER_INTERVAL 1
-#define LVTS_SENSOR_INTERVAL 1
-#define LVTS_HW_FILTER 0x2
+#define LVTS_PERIOD_UNIT 0
+#define LVTS_GROUP_INTERVAL 0
+#define LVTS_FILTER_INTERVAL 0
+#define LVTS_SENSOR_INTERVAL 0
+#define LVTS_HW_FILTER 0x0
#define LVTS_TSSEL_CONF 0x13121110
#define LVTS_CALSCALE_CONF 0x300
-#define LVTS_MONINT_CONF 0x9FBF7BDE
+#define LVTS_MONINT_CONF 0x8300318C
+
+#define LVTS_MONINT_OFFSET_SENSOR0 0xC
+#define LVTS_MONINT_OFFSET_SENSOR1 0x180
+#define LVTS_MONINT_OFFSET_SENSOR2 0x3000
+#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000
#define LVTS_INT_SENSOR0 0x0009001F
#define LVTS_INT_SENSOR1 0x001203E0
@@ -81,8 +86,13 @@
#define LVTS_MSR_IMMEDIATE_MODE 0
#define LVTS_MSR_FILTERED_MODE 1
+#define LVTS_MSR_READ_TIMEOUT_US 400
+#define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2)
+
#define LVTS_HW_SHUTDOWN_MT8195 105000
+#define LVTS_MINIMUM_THRESHOLD 20000
+
static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
static int coeff_b = LVTS_COEFF_B;
@@ -110,6 +120,8 @@ struct lvts_sensor {
void __iomem *base;
int id;
int dt_id;
+ int low_thresh;
+ int high_thresh;
};
struct lvts_ctrl {
@@ -119,6 +131,8 @@ struct lvts_ctrl {
int num_lvts_sensor;
int mode;
void __iomem *base;
+ int low_thresh;
+ int high_thresh;
};
struct lvts_domain {
@@ -190,7 +204,7 @@ static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td)
int i;
lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL);
- if (!lvts_td->dom_dentry)
+ if (IS_ERR(lvts_td->dom_dentry))
return 0;
for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
@@ -257,6 +271,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
void __iomem *msr = lvts_sensor->msr;
u32 value;
+ int rc;
/*
* Measurement registers:
@@ -269,7 +284,8 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
* 16 : Valid temperature
* 15-0 : Raw temperature
*/
- value = readl(msr);
+ rc = readl_poll_timeout(msr, value, value & BIT(16),
+ LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US);
/*
* As the thermal zone temperature will read before the
@@ -282,7 +298,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
* functionning temperature and directly jump to a system
* shutdown.
*/
- if (!(value & BIT(16)))
+ if (rc)
return -EAGAIN;
*temp = lvts_raw_to_temp(value & 0xFFFF);
@@ -290,32 +306,84 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
return 0;
}
+static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
+{
+ u32 masks[] = {
+ LVTS_MONINT_OFFSET_SENSOR0,
+ LVTS_MONINT_OFFSET_SENSOR1,
+ LVTS_MONINT_OFFSET_SENSOR2,
+ LVTS_MONINT_OFFSET_SENSOR3,
+ };
+ u32 value = 0;
+ int i;
+
+ value = readl(LVTS_MONINT(lvts_ctrl->base));
+
+ for (i = 0; i < ARRAY_SIZE(masks); i++) {
+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
+ value |= masks[i];
+ else
+ value &= ~masks[i];
+ }
+
+ writel(value, LVTS_MONINT(lvts_ctrl->base));
+}
+
+static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
+{
+ int i;
+
+ if (high > lvts_ctrl->high_thresh)
+ return true;
+
+ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++)
+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
+ return false;
+
+ return true;
+}
+
static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
{
struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
+ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
void __iomem *base = lvts_sensor->base;
- u32 raw_low = lvts_temp_to_raw(low);
+ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
u32 raw_high = lvts_temp_to_raw(high);
+ bool should_update_thresh;
+
+ lvts_sensor->low_thresh = low;
+ lvts_sensor->high_thresh = high;
+
+ should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high);
+ if (should_update_thresh) {
+ lvts_ctrl->high_thresh = high;
+ lvts_ctrl->low_thresh = low;
+ }
+ lvts_update_irq_mask(lvts_ctrl);
+
+ if (!should_update_thresh)
+ return 0;
/*
- * Hot to normal temperature threshold
+ * Low offset temperature threshold
*
- * LVTS_H2NTHRE
+ * LVTS_OFFSETL
*
* Bits:
*
* 14-0 : Raw temperature for threshold
*/
- if (low != -INT_MAX) {
- pr_debug("%s: Setting low limit temperature interrupt: %d\n",
- thermal_zone_device_type(tz), low);
- writel(raw_low, LVTS_H2NTHRE(base));
- }
+ pr_debug("%s: Setting low limit temperature interrupt: %d\n",
+ thermal_zone_device_type(tz), low);
+ writel(raw_low, LVTS_OFFSETL(base));
/*
- * Hot temperature threshold
+ * High offset temperature threshold
*
- * LVTS_HTHRE
+ * LVTS_OFFSETH
*
* Bits:
*
@@ -323,7 +391,7 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
*/
pr_debug("%s: Setting high limit temperature interrupt: %d\n",
thermal_zone_device_type(tz), high);
- writel(raw_high, LVTS_HTHRE(base));
+ writel(raw_high, LVTS_OFFSETH(base));
return 0;
}
@@ -451,7 +519,7 @@ static irqreturn_t lvts_irq_handler(int irq, void *data)
for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
- aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
+ aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]);
if (aux != IRQ_HANDLED)
continue;
@@ -521,6 +589,9 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
*/
lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ?
imm_regs[i] : msr_regs[i];
+
+ lvts_sensor[i].low_thresh = INT_MIN;
+ lvts_sensor[i].high_thresh = INT_MIN;
};
lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
@@ -688,6 +759,9 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
*/
lvts_ctrl[i].hw_tshut_raw_temp =
lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
+
+ lvts_ctrl[i].low_thresh = INT_MIN;
+ lvts_ctrl[i].high_thresh = INT_MIN;
}
/*
@@ -897,24 +971,6 @@ static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl)
writel(value, LVTS_MSRCTL0(lvts_ctrl->base));
/*
- * LVTS_MSRCTL1 : Measurement control
- *
- * Bits:
- *
- * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
- * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
- * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
- * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
- *
- * That configuration will ignore the filtering and the delays
- * introduced below in MONCTL1 and MONCTL2
- */
- if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
- value = BIT(9) | BIT(6) | BIT(5) | BIT(4);
- writel(value, LVTS_MSRCTL1(lvts_ctrl->base));
- }
-
- /*
* LVTS_MONCTL1 : Period unit and group interval configuration
*
* The clock source of LVTS thermal controller is 26MHz.
@@ -979,6 +1035,15 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
struct thermal_zone_device *tz;
u32 sensor_map = 0;
int i;
+ /*
+ * Bitmaps to enable each sensor on immediate and filtered modes, as
+ * described in MSRCTL1 and MONCTL0 registers below, respectively.
+ */
+ u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) };
+ u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) };
+
+ u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ?
+ sensor_imm_bitmap : sensor_filt_bitmap;
for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
@@ -1016,20 +1081,38 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
* map, so we can enable the temperature monitoring in
* the hardware thermal controller.
*/
- sensor_map |= BIT(i);
+ sensor_map |= sensor_bitmap[i];
}
/*
- * Bits:
- * 9: Single point access flow
- * 0-3: Enable sensing point 0-3
- *
* The initialization of the thermal zones give us
* which sensor point to enable. If any thermal zone
* was not described in the device tree, it won't be
* enabled here in the sensor map.
*/
- writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
+ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
+ /*
+ * LVTS_MSRCTL1 : Measurement control
+ *
+ * Bits:
+ *
+ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
+ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
+ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
+ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
+ *
+ * That configuration will ignore the filtering and the delays
+ * introduced in MONCTL1 and MONCTL2
+ */
+ writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base));
+ } else {
+ /*
+ * Bits:
+ * 9: Single point access flow
+ * 0-3: Enable sensing point 0-3
+ */
+ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
+ }
return 0;
}
@@ -1138,7 +1221,7 @@ static int lvts_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0)
- return dev_err_probe(dev, irq, "No irq resource\n");
+ return irq;
ret = lvts_domain_init(dev, lvts_td, lvts_data);
if (ret)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index a941b4241b0a..87c09f62ee81 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -23,7 +23,7 @@
#define BIT_APPEND 0x3
-struct tsens_legacy_calibration_format tsens_8916_nvmem = {
+static struct tsens_legacy_calibration_format tsens_8916_nvmem = {
.base_len = 7,
.base_shift = 3,
.sp_len = 5,
@@ -39,7 +39,7 @@ struct tsens_legacy_calibration_format tsens_8916_nvmem = {
},
};
-struct tsens_legacy_calibration_format tsens_8974_nvmem = {
+static struct tsens_legacy_calibration_format tsens_8974_nvmem = {
.base_len = 8,
.base_shift = 2,
.sp_len = 6,
@@ -61,7 +61,7 @@ struct tsens_legacy_calibration_format tsens_8974_nvmem = {
},
};
-struct tsens_legacy_calibration_format tsens_8974_backup_nvmem = {
+static struct tsens_legacy_calibration_format tsens_8974_backup_nvmem = {
.base_len = 8,
.base_shift = 2,
.sp_len = 6,
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 51322430f1fe..dc1c4ae2d8b0 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -21,7 +21,7 @@
#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088
#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090
-struct tsens_legacy_calibration_format tsens_qcs404_nvmem = {
+static struct tsens_legacy_calibration_format tsens_qcs404_nvmem = {
.base_len = 8,
.base_shift = 2,
.sp_len = 6,
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 58f4d8f7a3fd..e5bc2c82010f 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -887,7 +887,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
return -EADDRNOTAVAIL;
}
- data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
+ data->soc = (uintptr_t)of_device_get_match_data(&pdev->dev);
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index cca16d632d9f..f989b55a8aa8 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -56,8 +56,6 @@
#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
#define SUN50I_H6_THS_DATA_IRQ_STS(x) BIT(x)
-/* millidegree celsius */
-
struct tsensor {
struct ths_device *tmdev;
struct thermal_zone_device *tzd;
@@ -286,7 +284,7 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev)
size_t callen;
int ret = 0;
- calcell = devm_nvmem_cell_get(dev, "calibration");
+ calcell = nvmem_cell_get(dev, "calibration");
if (IS_ERR(calcell)) {
if (PTR_ERR(calcell) == -EPROBE_DEFER)
return -EPROBE_DEFER;
@@ -316,6 +314,8 @@ static int sun8i_ths_calibrate(struct ths_device *tmdev)
kfree(caldata);
out:
+ if (!IS_ERR(calcell))
+ nvmem_cell_put(calcell);
return ret;
}
@@ -489,8 +489,6 @@ static int sun8i_ths_probe(struct platform_device *pdev)
if (!tmdev->chip)
return -EINVAL;
- platform_set_drvdata(pdev, tmdev);
-
ret = sun8i_ths_resource_init(tmdev);
if (ret)
return ret;
diff --git a/drivers/thermal/tegra/tegra-bpmp-thermal.c b/drivers/thermal/tegra/tegra-bpmp-thermal.c
index a2879d624945..4ffc3bb3bf35 100644
--- a/drivers/thermal/tegra/tegra-bpmp-thermal.c
+++ b/drivers/thermal/tegra/tegra-bpmp-thermal.c
@@ -167,19 +167,69 @@ static int tegra_bpmp_thermal_get_num_zones(struct tegra_bpmp *bpmp,
return 0;
}
+static int tegra_bpmp_thermal_trips_supported(struct tegra_bpmp *bpmp, bool *supported)
+{
+ struct mrq_thermal_host_to_bpmp_request req;
+ union mrq_thermal_bpmp_to_host_response reply;
+ struct tegra_bpmp_message msg;
+ int err;
+
+ memset(&req, 0, sizeof(req));
+ req.type = CMD_THERMAL_QUERY_ABI;
+ req.query_abi.type = CMD_THERMAL_SET_TRIP;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.mrq = MRQ_THERMAL;
+ msg.tx.data = &req;
+ msg.tx.size = sizeof(req);
+ msg.rx.data = &reply;
+ msg.rx.size = sizeof(reply);
+
+ err = tegra_bpmp_transfer(bpmp, &msg);
+ if (err)
+ return err;
+
+ if (msg.rx.ret == 0) {
+ *supported = true;
+ return 0;
+ } else if (msg.rx.ret == -BPMP_ENODEV) {
+ *supported = false;
+ return 0;
+ } else {
+ return -EINVAL;
+ }
+}
+
static const struct thermal_zone_device_ops tegra_bpmp_of_thermal_ops = {
.get_temp = tegra_bpmp_thermal_get_temp,
.set_trips = tegra_bpmp_thermal_set_trips,
};
+static const struct thermal_zone_device_ops tegra_bpmp_of_thermal_ops_notrips = {
+ .get_temp = tegra_bpmp_thermal_get_temp,
+};
+
static int tegra_bpmp_thermal_probe(struct platform_device *pdev)
{
struct tegra_bpmp *bpmp = dev_get_drvdata(pdev->dev.parent);
+ const struct thermal_zone_device_ops *thermal_ops;
struct tegra_bpmp_thermal *tegra;
struct thermal_zone_device *tzd;
unsigned int i, max_num_zones;
+ bool supported;
int err;
+ err = tegra_bpmp_thermal_trips_supported(bpmp, &supported);
+ if (err) {
+ dev_err(&pdev->dev, "failed to determine if trip points are supported\n");
+ return err;
+ }
+
+ if (supported)
+ thermal_ops = &tegra_bpmp_of_thermal_ops;
+ else
+ thermal_ops = &tegra_bpmp_of_thermal_ops_notrips;
+
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
if (!tegra)
return -ENOMEM;
@@ -222,7 +272,7 @@ static int tegra_bpmp_thermal_probe(struct platform_device *pdev)
}
tzd = devm_thermal_of_zone_register(
- &pdev->dev, i, zone, &tegra_bpmp_of_thermal_ops);
+ &pdev->dev, i, zone, thermal_ops);
if (IS_ERR(tzd)) {
if (PTR_ERR(tzd) == -EPROBE_DEFER)
return -EPROBE_DEFER;
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index f4f1a04f8c0f..1717e4a19dcb 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -142,7 +142,6 @@ static int gadc_thermal_probe(struct platform_device *pdev)
return ret;
gti->dev = &pdev->dev;
- platform_set_drvdata(pdev, gti);
gti->tz_dev = devm_thermal_of_zone_register(&pdev->dev, 0, gti,
&gadc_thermal_ops);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index a59700593d32..0bdde1ab5d8b 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1266,7 +1266,7 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
return ERR_PTR(-EINVAL);
}
- if (num_trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp) && !trips)
+ if (num_trips > 0 && !trips)
return ERR_PTR(-EINVAL);
if (!thermal_class)
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 04513f9fbfa1..de884bea28b6 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -70,7 +70,7 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
void thermal_cdev_update(struct thermal_cooling_device *);
void __thermal_cdev_update(struct thermal_cooling_device *cdev);
-int get_tz_trend(struct thermal_zone_device *tz, int trip);
+int get_tz_trend(struct thermal_zone_device *tz, int trip_index);
struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index cfba0965a22d..4d66372c9629 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -22,8 +22,9 @@
#include "thermal_core.h"
#include "thermal_trace.h"
-int get_tz_trend(struct thermal_zone_device *tz, int trip)
+int get_tz_trend(struct thermal_zone_device *tz, int trip_index)
{
+ struct thermal_trip *trip = tz->trips ? &tz->trips[trip_index] : NULL;
enum thermal_trend trend;
if (tz->emul_temperature || !tz->ops->get_trend ||
diff --git a/drivers/thermal/thermal_trip.c b/drivers/thermal/thermal_trip.c
index 53115cfdfd42..024e2e365a26 100644
--- a/drivers/thermal/thermal_trip.c
+++ b/drivers/thermal/thermal_trip.c
@@ -101,29 +101,11 @@ void __thermal_zone_set_trips(struct thermal_zone_device *tz)
int __thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
struct thermal_trip *trip)
{
- int ret;
-
- if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip)
+ if (!tz || !tz->trips || trip_id < 0 || trip_id >= tz->num_trips || !trip)
return -EINVAL;
- if (tz->trips) {
- *trip = tz->trips[trip_id];
- return 0;
- }
-
- if (tz->ops->get_trip_hyst) {
- ret = tz->ops->get_trip_hyst(tz, trip_id, &trip->hysteresis);
- if (ret)
- return ret;
- } else {
- trip->hysteresis = 0;
- }
-
- ret = tz->ops->get_trip_temp(tz, trip_id, &trip->temperature);
- if (ret)
- return ret;
-
- return tz->ops->get_trip_type(tz, trip_id, &trip->type);
+ *trip = tz->trips[trip_id];
+ return 0;
}
EXPORT_SYMBOL_GPL(__thermal_zone_get_trip);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index a1c9a1530183..0c2eb9c6e58b 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -314,7 +314,7 @@ int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
- if (!bgp || IS_ERR(bgp)) {
+ if (IS_ERR_OR_NULL(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
return -EINVAL;
}
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index d414a4b7a94a..6ba2613627e1 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -109,7 +109,8 @@ static inline int __ti_thermal_get_temp(struct thermal_zone_device *tz, int *tem
return ret;
}
-static int __ti_thermal_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend)
+static int __ti_thermal_get_trend(struct thermal_zone_device *tz,
+ struct thermal_trip *trip, enum thermal_trend *trend)
{
struct ti_thermal_data *data = thermal_zone_device_priv(tz);
struct ti_bandgap *bgp;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index b449a46766f5..eb17495c8acc 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -53,6 +53,20 @@ enum thermal_notify_event {
THERMAL_EVENT_KEEP_ALIVE, /* Request for user space handler to respond */
};
+/**
+ * struct thermal_trip - representation of a point in temperature domain
+ * @temperature: temperature value in miliCelsius
+ * @hysteresis: relative hysteresis in miliCelsius
+ * @type: trip point type
+ * @priv: pointer to driver data associated with this trip
+ */
+struct thermal_trip {
+ int temperature;
+ int hysteresis;
+ enum thermal_trip_type type;
+ void *priv;
+};
+
struct thermal_zone_device_ops {
int (*bind) (struct thermal_zone_device *,
struct thermal_cooling_device *);
@@ -62,34 +76,16 @@ struct thermal_zone_device_ops {
int (*set_trips) (struct thermal_zone_device *, int, int);
int (*change_mode) (struct thermal_zone_device *,
enum thermal_device_mode);
- int (*get_trip_type) (struct thermal_zone_device *, int,
- enum thermal_trip_type *);
- int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
- int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
int (*get_crit_temp) (struct thermal_zone_device *, int *);
int (*set_emul_temp) (struct thermal_zone_device *, int);
- int (*get_trend) (struct thermal_zone_device *, int,
+ int (*get_trend) (struct thermal_zone_device *, struct thermal_trip *,
enum thermal_trend *);
void (*hot)(struct thermal_zone_device *);
void (*critical)(struct thermal_zone_device *);
};
-/**
- * struct thermal_trip - representation of a point in temperature domain
- * @temperature: temperature value in miliCelsius
- * @hysteresis: relative hysteresis in miliCelsius
- * @type: trip point type
- * @priv: pointer to driver data associated with this trip
- */
-struct thermal_trip {
- int temperature;
- int hysteresis;
- enum thermal_trip_type type;
- void *priv;
-};
-
struct thermal_cooling_device_ops {
int (*get_max_state) (struct thermal_cooling_device *, unsigned long *);
int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *);