summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2015-10-12 21:44:49 +0300
committerStephen Boyd <sboyd@codeaurora.org>2015-10-12 21:44:49 +0300
commit67d7188afe23e4b1b82ee6fed35c14387f169f74 (patch)
treeec3fe1c511b34c89626745b08bbd46c4c6d7a8a4
parent53c929c922ccc5e615c3310e86ffbc1387372854 (diff)
parent41691b8862e2a32080306f17a723efc4b6ca86ab (diff)
downloadlinux-67d7188afe23e4b1b82ee6fed35c14387f169f74.tar.xz
Merge branch 'clk-bcm2835' into clk-next
* clk-bcm2835: clk: bcm2835: Add support for programming the audio domain clocks clk: bcm2835: Add binding docs for the new platform clock driver. clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt45
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/bcm/Makefile1
-rw-r--r--drivers/clk/bcm/clk-bcm2835.c1575
-rw-r--r--drivers/clk/clk-bcm2835.c55
-rw-r--r--include/dt-bindings/clock/bcm2835.h47
6 files changed, 1668 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 000000000000..e56a1df3a9d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,45 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835. There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels. Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-cprman"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The external oscillator clock phandle
+
+Example:
+
+ clk_osc: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
+ };
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6594e53a4444..e44feca7a1ac 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -19,7 +19,6 @@ endif
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
-obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 8a7a477862c7..ee2349bbe1f1 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
new file mode 100644
index 000000000000..39bf5820297e
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -0,0 +1,1575 @@
+/*
+ * Copyright (C) 2010,2015 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels. There's a root
+ * oscillator running at 19.2Mhz. After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays". Those 5 PLLs each can divide their output to
+ * produce up to 4 channels. Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD 0x5a000000
+
+#define CM_GNRICCTL 0x000
+#define CM_GNRICDIV 0x004
+# define CM_DIV_FRAC_BITS 12
+
+#define CM_VPUCTL 0x008
+#define CM_VPUDIV 0x00c
+#define CM_SYSCTL 0x010
+#define CM_SYSDIV 0x014
+#define CM_PERIACTL 0x018
+#define CM_PERIADIV 0x01c
+#define CM_PERIICTL 0x020
+#define CM_PERIIDIV 0x024
+#define CM_H264CTL 0x028
+#define CM_H264DIV 0x02c
+#define CM_ISPCTL 0x030
+#define CM_ISPDIV 0x034
+#define CM_V3DCTL 0x038
+#define CM_V3DDIV 0x03c
+#define CM_CAM0CTL 0x040
+#define CM_CAM0DIV 0x044
+#define CM_CAM1CTL 0x048
+#define CM_CAM1DIV 0x04c
+#define CM_CCP2CTL 0x050
+#define CM_CCP2DIV 0x054
+#define CM_DSI0ECTL 0x058
+#define CM_DSI0EDIV 0x05c
+#define CM_DSI0PCTL 0x060
+#define CM_DSI0PDIV 0x064
+#define CM_DPICTL 0x068
+#define CM_DPIDIV 0x06c
+#define CM_GP0CTL 0x070
+#define CM_GP0DIV 0x074
+#define CM_GP1CTL 0x078
+#define CM_GP1DIV 0x07c
+#define CM_GP2CTL 0x080
+#define CM_GP2DIV 0x084
+#define CM_HSMCTL 0x088
+#define CM_HSMDIV 0x08c
+#define CM_OTPCTL 0x090
+#define CM_OTPDIV 0x094
+#define CM_PWMCTL 0x0a0
+#define CM_PWMDIV 0x0a4
+#define CM_SMICTL 0x0b0
+#define CM_SMIDIV 0x0b4
+#define CM_TSENSCTL 0x0e0
+#define CM_TSENSDIV 0x0e4
+#define CM_TIMERCTL 0x0e8
+#define CM_TIMERDIV 0x0ec
+#define CM_UARTCTL 0x0f0
+#define CM_UARTDIV 0x0f4
+#define CM_VECCTL 0x0f8
+#define CM_VECDIV 0x0fc
+#define CM_PULSECTL 0x190
+#define CM_PULSEDIV 0x194
+#define CM_SDCCTL 0x1a8
+#define CM_SDCDIV 0x1ac
+#define CM_ARMCTL 0x1b0
+#define CM_EMMCCTL 0x1c0
+#define CM_EMMCDIV 0x1c4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE BIT(4)
+# define CM_KILL BIT(5)
+# define CM_GATE_BIT 6
+# define CM_GATE BIT(CM_GATE_BIT)
+# define CM_BUSY BIT(7)
+# define CM_BUSYD BIT(8)
+# define CM_SRC_SHIFT 0
+# define CM_SRC_BITS 4
+# define CM_SRC_MASK 0xf
+# define CM_SRC_GND 0
+# define CM_SRC_OSC 1
+# define CM_SRC_TESTDEBUG0 2
+# define CM_SRC_TESTDEBUG1 3
+# define CM_SRC_PLLA_CORE 4
+# define CM_SRC_PLLA_PER 4
+# define CM_SRC_PLLC_CORE0 5
+# define CM_SRC_PLLC_PER 5
+# define CM_SRC_PLLC_CORE1 8
+# define CM_SRC_PLLD_CORE 6
+# define CM_SRC_PLLD_PER 6
+# define CM_SRC_PLLH_AUX 7
+# define CM_SRC_PLLC_CORE1 8
+# define CM_SRC_PLLC_CORE2 9
+
+#define CM_OSCCOUNT 0x100
+
+#define CM_PLLA 0x104
+# define CM_PLL_ANARST BIT(8)
+# define CM_PLLA_HOLDPER BIT(7)
+# define CM_PLLA_LOADPER BIT(6)
+# define CM_PLLA_HOLDCORE BIT(5)
+# define CM_PLLA_LOADCORE BIT(4)
+# define CM_PLLA_HOLDCCP2 BIT(3)
+# define CM_PLLA_LOADCCP2 BIT(2)
+# define CM_PLLA_HOLDDSI0 BIT(1)
+# define CM_PLLA_LOADDSI0 BIT(0)
+
+#define CM_PLLC 0x108
+# define CM_PLLC_HOLDPER BIT(7)
+# define CM_PLLC_LOADPER BIT(6)
+# define CM_PLLC_HOLDCORE2 BIT(5)
+# define CM_PLLC_LOADCORE2 BIT(4)
+# define CM_PLLC_HOLDCORE1 BIT(3)
+# define CM_PLLC_LOADCORE1 BIT(2)
+# define CM_PLLC_HOLDCORE0 BIT(1)
+# define CM_PLLC_LOADCORE0 BIT(0)
+
+#define CM_PLLD 0x10c
+# define CM_PLLD_HOLDPER BIT(7)
+# define CM_PLLD_LOADPER BIT(6)
+# define CM_PLLD_HOLDCORE BIT(5)
+# define CM_PLLD_LOADCORE BIT(4)
+# define CM_PLLD_HOLDDSI1 BIT(3)
+# define CM_PLLD_LOADDSI1 BIT(2)
+# define CM_PLLD_HOLDDSI0 BIT(1)
+# define CM_PLLD_LOADDSI0 BIT(0)
+
+#define CM_PLLH 0x110
+# define CM_PLLH_LOADRCAL BIT(2)
+# define CM_PLLH_LOADAUX BIT(1)
+# define CM_PLLH_LOADPIX BIT(0)
+
+#define CM_LOCK 0x114
+# define CM_LOCK_FLOCKH BIT(12)
+# define CM_LOCK_FLOCKD BIT(11)
+# define CM_LOCK_FLOCKC BIT(10)
+# define CM_LOCK_FLOCKB BIT(9)
+# define CM_LOCK_FLOCKA BIT(8)
+
+#define CM_EVENT 0x118
+#define CM_DSI1ECTL 0x158
+#define CM_DSI1EDIV 0x15c
+#define CM_DSI1PCTL 0x160
+#define CM_DSI1PDIV 0x164
+#define CM_DFTCTL 0x168
+#define CM_DFTDIV 0x16c
+
+#define CM_PLLB 0x170
+# define CM_PLLB_HOLDARM BIT(1)
+# define CM_PLLB_LOADARM BIT(0)
+
+#define A2W_PLLA_CTRL 0x1100
+#define A2W_PLLC_CTRL 0x1120
+#define A2W_PLLD_CTRL 0x1140
+#define A2W_PLLH_CTRL 0x1160
+#define A2W_PLLB_CTRL 0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE BIT(17)
+# define A2W_PLL_CTRL_PWRDN BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK 0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT 12
+# define A2W_PLL_CTRL_NDIV_MASK 0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT 0
+
+#define A2W_PLLA_ANA0 0x1010
+#define A2W_PLLC_ANA0 0x1030
+#define A2W_PLLD_ANA0 0x1050
+#define A2W_PLLH_ANA0 0x1070
+#define A2W_PLLB_ANA0 0x10f0
+
+#define A2W_PLL_KA_SHIFT 7
+#define A2W_PLL_KA_MASK GENMASK(9, 7)
+#define A2W_PLL_KI_SHIFT 19
+#define A2W_PLL_KI_MASK GENMASK(21, 19)
+#define A2W_PLL_KP_SHIFT 15
+#define A2W_PLL_KP_MASK GENMASK(18, 15)
+
+#define A2W_PLLH_KA_SHIFT 19
+#define A2W_PLLH_KA_MASK GENMASK(21, 19)
+#define A2W_PLLH_KI_LOW_SHIFT 22
+#define A2W_PLLH_KI_LOW_MASK GENMASK(23, 22)
+#define A2W_PLLH_KI_HIGH_SHIFT 0
+#define A2W_PLLH_KI_HIGH_MASK GENMASK(0, 0)
+#define A2W_PLLH_KP_SHIFT 1
+#define A2W_PLLH_KP_MASK GENMASK(4, 1)
+
+#define A2W_XOSC_CTRL 0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE BIT(0)
+
+#define A2W_PLLA_FRAC 0x1200
+#define A2W_PLLC_FRAC 0x1220
+#define A2W_PLLD_FRAC 0x1240
+#define A2W_PLLH_FRAC 0x1260
+#define A2W_PLLB_FRAC 0x12e0
+# define A2W_PLL_FRAC_MASK ((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS 20
+
+#define A2W_PLL_CHANNEL_DISABLE BIT(8)
+#define A2W_PLL_DIV_BITS 8
+#define A2W_PLL_DIV_SHIFT 0
+
+#define A2W_PLLA_DSI0 0x1300
+#define A2W_PLLA_CORE 0x1400
+#define A2W_PLLA_PER 0x1500
+#define A2W_PLLA_CCP2 0x1600
+
+#define A2W_PLLC_CORE2 0x1320
+#define A2W_PLLC_CORE1 0x1420
+#define A2W_PLLC_PER 0x1520
+#define A2W_PLLC_CORE0 0x1620
+
+#define A2W_PLLD_DSI0 0x1340
+#define A2W_PLLD_CORE 0x1440
+#define A2W_PLLD_PER 0x1540
+#define A2W_PLLD_DSI1 0x1640
+
+#define A2W_PLLH_AUX 0x1360
+#define A2W_PLLH_RCAL 0x1460
+#define A2W_PLLH_PIX 0x1560
+#define A2W_PLLH_STS 0x1660
+
+#define A2W_PLLH_CTRLR 0x1960
+#define A2W_PLLH_FRACR 0x1a60
+#define A2W_PLLH_AUXR 0x1b60
+#define A2W_PLLH_RCALR 0x1c60
+#define A2W_PLLH_PIXR 0x1d60
+#define A2W_PLLH_STSR 0x1e60
+
+#define A2W_PLLB_ARM 0x13e0
+#define A2W_PLLB_SP0 0x14e0
+#define A2W_PLLB_SP1 0x15e0
+#define A2W_PLLB_SP2 0x16e0
+
+#define LOCK_TIMEOUT_NS 100000000
+#define BCM2835_MAX_FB_RATE 1750000000u
+
+struct bcm2835_cprman {
+ struct device *dev;
+ void __iomem *regs;
+ spinlock_t regs_lock;
+ const char *osc_name;
+
+ struct clk_onecell_data onecell;
+ struct clk *clks[BCM2835_CLOCK_COUNT];
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+ writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+ return readl(cprman->regs + reg);
+}
+
+/*
+ * These are fixed clocks. They're probably not all root clocks and it may
+ * be possible to turn them on and off but until this is mapped out better
+ * it's the only way they can be used.
+ */
+void __init bcm2835_init_clocks(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
+ 126000000);
+ if (IS_ERR(clk))
+ pr_err("apb_pclk not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
+ 3000000);
+ if (IS_ERR(clk))
+ pr_err("uart0_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20201000.uart");
+ if (ret)
+ pr_err("uart0_pclk alias not registered\n");
+
+ clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
+ 125000000);
+ if (IS_ERR(clk))
+ pr_err("uart1_pclk not registered\n");
+ ret = clk_register_clkdev(clk, NULL, "20215000.uart");
+ if (ret)
+ pr_err("uart1_pclk alias not registered\n");
+}
+
+struct bcm2835_pll_data {
+ const char *name;
+ u32 cm_ctrl_reg;
+ u32 a2w_ctrl_reg;
+ u32 frac_reg;
+ u32 ana_reg_base;
+ u32 reference_enable_mask;
+ /* Bit in CM_LOCK to indicate when the PLL has locked. */
+ u32 lock_mask;
+
+ const struct bcm2835_pll_ana_bits *ana;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+ /*
+ * Highest rate for the VCO before we have to use the
+ * pre-divide-by-2.
+ */
+ unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+ u32 mask0;
+ u32 set0;
+ u32 mask1;
+ u32 set1;
+ u32 mask3;
+ u32 set3;
+ u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+ .mask0 = 0,
+ .set0 = 0,
+ .mask1 = ~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+ .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+ .mask3 = ~A2W_PLL_KA_MASK,
+ .set3 = (2 << A2W_PLL_KA_SHIFT),
+ .fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+ .mask0 = ~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+ .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
+ .mask1 = ~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+ .set1 = (6 << A2W_PLLH_KP_SHIFT),
+ .mask3 = 0,
+ .set3 = 0,
+ .fb_prediv_mask = BIT(11),
+};
+
+/*
+ * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
+ * Port 2) transmitter clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plla_data = {
+ .name = "plla",
+ .cm_ctrl_reg = CM_PLLA,
+ .a2w_ctrl_reg = A2W_PLLA_CTRL,
+ .frac_reg = A2W_PLLA_FRAC,
+ .ana_reg_base = A2W_PLLA_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKA,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/* PLLB is used for the ARM's clock. */
+static const struct bcm2835_pll_data bcm2835_pllb_data = {
+ .name = "pllb",
+ .cm_ctrl_reg = CM_PLLB,
+ .a2w_ctrl_reg = A2W_PLLB_CTRL,
+ .frac_reg = A2W_PLLB_FRAC,
+ .ana_reg_base = A2W_PLLB_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKB,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+*/
+static const struct bcm2835_pll_data bcm2835_pllc_data = {
+ .name = "pllc",
+ .cm_ctrl_reg = CM_PLLC,
+ .a2w_ctrl_reg = A2W_PLLC_CTRL,
+ .frac_reg = A2W_PLLC_FRAC,
+ .ana_reg_base = A2W_PLLC_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKC,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLD is the display PLL, used to drive DSI display panels.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plld_data = {
+ .name = "plld",
+ .cm_ctrl_reg = CM_PLLD,
+ .a2w_ctrl_reg = A2W_PLLD_CTRL,
+ .frac_reg = A2W_PLLD_FRAC,
+ .ana_reg_base = A2W_PLLD_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKD,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLH is used to supply the pixel clock or the AUX clock for the TV
+ * encoder.
+ *
+ * It is in the HDMI power domain.
+ */
+static const struct bcm2835_pll_data bcm2835_pllh_data = {
+ "pllh",
+ .cm_ctrl_reg = CM_PLLH,
+ .a2w_ctrl_reg = A2W_PLLH_CTRL,
+ .frac_reg = A2W_PLLH_FRAC,
+ .ana_reg_base = A2W_PLLH_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKH,
+
+ .ana = &bcm2835_ana_pllh,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+struct bcm2835_pll_divider_data {
+ const char *name;
+ const struct bcm2835_pll_data *source_pll;
+ u32 cm_reg;
+ u32 a2w_reg;
+
+ u32 load_mask;
+ u32 hold_mask;
+ u32 fixed_divider;
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
+ .name = "plla_core",
+ .source_pll = &bcm2835_plla_data,
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_CORE,
+ .load_mask = CM_PLLA_LOADCORE,
+ .hold_mask = CM_PLLA_HOLDCORE,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
+ .name = "plla_per",
+ .source_pll = &bcm2835_plla_data,
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_PER,
+ .load_mask = CM_PLLA_LOADPER,
+ .hold_mask = CM_PLLA_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
+ .name = "pllb_arm",
+ .source_pll = &bcm2835_pllb_data,
+ .cm_reg = CM_PLLB,
+ .a2w_reg = A2W_PLLB_ARM,
+ .load_mask = CM_PLLB_LOADARM,
+ .hold_mask = CM_PLLB_HOLDARM,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
+ .name = "pllc_core0",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE0,
+ .load_mask = CM_PLLC_LOADCORE0,
+ .hold_mask = CM_PLLC_HOLDCORE0,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
+ .name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC, A2W_PLLC_CORE1,
+ .load_mask = CM_PLLC_LOADCORE1,
+ .hold_mask = CM_PLLC_HOLDCORE1,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
+ .name = "pllc_core2",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE2,
+ .load_mask = CM_PLLC_LOADCORE2,
+ .hold_mask = CM_PLLC_HOLDCORE2,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
+ .name = "pllc_per",
+ .source_pll = &bcm2835_pllc_data,
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_PER,
+ .load_mask = CM_PLLC_LOADPER,
+ .hold_mask = CM_PLLC_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
+ .name = "plld_core",
+ .source_pll = &bcm2835_plld_data,
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_CORE,
+ .load_mask = CM_PLLD_LOADCORE,
+ .hold_mask = CM_PLLD_HOLDCORE,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
+ .name = "plld_per",
+ .source_pll = &bcm2835_plld_data,
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_PER,
+ .load_mask = CM_PLLD_LOADPER,
+ .hold_mask = CM_PLLD_HOLDPER,
+ .fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
+ .name = "pllh_rcal",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_RCAL,
+ .load_mask = CM_PLLH_LOADRCAL,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
+ .name = "pllh_aux",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_AUX,
+ .load_mask = CM_PLLH_LOADAUX,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
+ .name = "pllh_pix",
+ .source_pll = &bcm2835_pllh_data,
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_PIX,
+ .load_mask = CM_PLLH_LOADPIX,
+ .hold_mask = 0,
+ .fixed_divider = 10,
+};
+
+struct bcm2835_clock_data {
+ const char *name;
+
+ const char *const *parents;
+ int num_mux_parents;
+
+ u32 ctl_reg;
+ u32 div_reg;
+
+ /* Number of integer bits in the divider */
+ u32 int_bits;
+ /* Number of fractional bits in the divider */
+ u32 frac_bits;
+
+ bool is_vpu_clock;
+};
+
+static const char *const bcm2835_clock_per_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_per",
+ "pllc_per",
+ "plld_per",
+ "pllh_aux",
+};
+
+static const char *const bcm2835_clock_vpu_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_core",
+ "pllc_core0",
+ "plld_core",
+ "pllh_aux",
+ "pllc_core1",
+ "pllc_core2",
+};
+
+static const char *const bcm2835_clock_osc_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1"
+};
+
+/*
+ * Used for a 1Mhz clock for the system clocksource, and also used by
+ * the watchdog timer and the camera pulse generator.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
+ .name = "timer",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_TIMERCTL,
+ .div_reg = CM_TIMERDIV,
+ .int_bits = 6,
+ .frac_bits = 12,
+};
+
+/* One Time Programmable Memory clock. Maximum 10Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
+ .name = "otp",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_OTPCTL,
+ .div_reg = CM_OTPDIV,
+ .int_bits = 4,
+ .frac_bits = 0,
+};
+
+/*
+ * VPU clock. This doesn't have an enable bit, since it drives the
+ * bus for everything else, and is special so it doesn't need to be
+ * gated for rate changes. It is also known as "clk_audio" in various
+ * hardware documentation.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
+ .name = "vpu",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_VPUCTL,
+ .div_reg = CM_VPUDIV,
+ .int_bits = 12,
+ .frac_bits = 8,
+ .is_vpu_clock = true,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
+ .name = "v3d",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_V3DCTL,
+ .div_reg = CM_V3DDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
+ .name = "isp",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_ISPCTL,
+ .div_reg = CM_ISPDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
+ .name = "h264",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_H264CTL,
+ .div_reg = CM_H264DIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+/* TV encoder clock. Only operating frequency is 108Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
+ .name = "vec",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_VECCTL,
+ .div_reg = CM_VECDIV,
+ .int_bits = 4,
+ .frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
+ .name = "uart",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_UARTCTL,
+ .div_reg = CM_UARTDIV,
+ .int_bits = 10,
+ .frac_bits = 12,
+};
+
+/* HDMI state machine */
+static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
+ .name = "hsm",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_HSMCTL,
+ .div_reg = CM_HSMDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+/*
+ * Secondary SDRAM clock. Used for low-voltage modes when the PLL in
+ * the SDRAM controller can't be used.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
+ .name = "sdram",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+ .parents = bcm2835_clock_vpu_parents,
+ .ctl_reg = CM_SDCCTL,
+ .div_reg = CM_SDCDIV,
+ .int_bits = 6,
+ .frac_bits = 0,
+};
+
+/* Clock for the temperature sensor. Generally run at 2Mhz, max 5Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
+ .name = "tsens",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+ .parents = bcm2835_clock_osc_parents,
+ .ctl_reg = CM_TSENSCTL,
+ .div_reg = CM_TSENSDIV,
+ .int_bits = 5,
+ .frac_bits = 0,
+};
+
+/* Arasan EMMC clock */
+static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
+ .name = "emmc",
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+ .parents = bcm2835_clock_per_parents,
+ .ctl_reg = CM_EMMCCTL,
+ .div_reg = CM_EMMCDIV,
+ .int_bits = 4,
+ .frac_bits = 8,
+};
+
+struct bcm2835_pll {
+ struct clk_hw hw;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+
+ return cprman_read(cprman, data->a2w_ctrl_reg) &
+ A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+ unsigned long parent_rate,
+ u32 *ndiv, u32 *fdiv)
+{
+ u64 div;
+
+ div = (u64)rate << A2W_PLL_FRAC_BITS;
+ do_div(div, parent_rate);
+
+ *ndiv = div >> A2W_PLL_FRAC_BITS;
+ *fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+ u32 ndiv, u32 fdiv, u32 pdiv)
+{
+ u64 rate;
+
+ if (pdiv == 0)
+ return 0;
+
+ rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+ do_div(rate, pdiv);
+ return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ u32 ndiv, fdiv;
+
+ bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+ return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+ u32 ndiv, pdiv, fdiv;
+ bool using_prediv;
+
+ if (parent_rate == 0)
+ return 0;
+
+ fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+ ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+ pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+ using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+ data->ana->fb_prediv_mask;
+
+ if (using_prediv)
+ ndiv *= 2;
+
+ return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+
+ cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+ cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ ktime_t timeout;
+
+ /* Take the PLL out of reset. */
+ cprman_write(cprman, data->cm_ctrl_reg,
+ cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+
+ /* Wait for the PLL to lock. */
+ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+ while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+ clk_hw_get_name(hw));
+ return -ETIMEDOUT;
+ }
+
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+ int i;
+
+ /*
+ * ANA register setup is done as a series of writes to
+ * ANA3-ANA0, in that order. This lets us write all 4
+ * registers as a single cycle of the serdes interface (taking
+ * 100 xosc clocks), whereas if we were to update ana0, 1, and
+ * 3 individually through their partial-write registers, each
+ * would be their own serdes cycle.
+ */
+ for (i = 3; i >= 0; i--)
+ cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ struct bcm2835_cprman *cprman = pll->cprman;
+ const struct bcm2835_pll_data *data = pll->data;
+ bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+ u32 ndiv, fdiv, a2w_ctl;
+ u32 ana[4];
+ int i;
+
+ if (rate < data->min_rate || rate > data->max_rate) {
+ dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
+ clk_hw_get_name(hw), rate,
+ data->min_rate, data->max_rate);
+ return -EINVAL;
+ }
+
+ if (rate > data->max_fb_rate) {
+ use_fb_prediv = true;
+ rate /= 2;
+ } else {
+ use_fb_prediv = false;
+ }
+
+ bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+ for (i = 3; i >= 0; i--)
+ ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+ was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+
+ ana[0] &= ~data->ana->mask0;
+ ana[0] |= data->ana->set0;
+ ana[1] &= ~data->ana->mask1;
+ ana[1] |= data->ana->set1;
+ ana[3] &= ~data->ana->mask3;
+ ana[3] |= data->ana->set3;
+
+ if (was_using_prediv && !use_fb_prediv) {
+ ana[1] &= ~data->ana->fb_prediv_mask;
+ do_ana_setup_first = true;
+ } else if (!was_using_prediv && use_fb_prediv) {
+ ana[1] |= data->ana->fb_prediv_mask;
+ do_ana_setup_first = false;
+ } else {
+ do_ana_setup_first = true;
+ }
+
+ /* Unmask the reference clock from the oscillator. */
+ cprman_write(cprman, A2W_XOSC_CTRL,
+ cprman_read(cprman, A2W_XOSC_CTRL) |
+ data->reference_enable_mask);
+
+ if (do_ana_setup_first)
+ bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+ /* Set the PLL multiplier from the oscillator. */
+ cprman_write(cprman, data->frac_reg, fdiv);
+
+ a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+ a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+ a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+ a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+ a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
+ cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+ if (!do_ana_setup_first)
+ bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+ .is_prepared = bcm2835_pll_is_on,
+ .prepare = bcm2835_pll_on,
+ .unprepare = bcm2835_pll_off,
+ .recalc_rate = bcm2835_pll_get_rate,
+ .set_rate = bcm2835_pll_set_rate,
+ .round_rate = bcm2835_pll_round_rate,
+};
+
+struct bcm2835_pll_divider {
+ struct clk_divider div;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+ return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return clk_divider_ops.round_rate(hw, rate, parent_rate);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+ u32 div = cprman_read(cprman, data->a2w_reg);
+
+ div &= (1 << A2W_PLL_DIV_BITS) - 1;
+ if (div == 0)
+ div = 256;
+
+ return parent_rate / div;
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ cprman_write(cprman, data->cm_reg,
+ (cprman_read(cprman, data->cm_reg) &
+ ~data->load_mask) | data->hold_mask);
+ cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+
+ cprman_write(cprman, data->a2w_reg,
+ cprman_read(cprman, data->a2w_reg) &
+ ~A2W_PLL_CHANNEL_DISABLE);
+
+ cprman_write(cprman, data->cm_reg,
+ cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+
+ return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+ struct bcm2835_cprman *cprman = divider->cprman;
+ const struct bcm2835_pll_divider_data *data = divider->data;
+ u32 cm;
+ int ret;
+
+ ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+ if (ret)
+ return ret;
+
+ cm = cprman_read(cprman, data->cm_reg);
+ cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+ cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+ .is_prepared = bcm2835_pll_divider_is_on,
+ .prepare = bcm2835_pll_divider_on,
+ .unprepare = bcm2835_pll_divider_off,
+ .recalc_rate = bcm2835_pll_divider_get_rate,
+ .set_rate = bcm2835_pll_divider_set_rate,
+ .round_rate = bcm2835_pll_divider_round_rate,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+ struct clk_hw hw;
+ struct bcm2835_cprman *cprman;
+ const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+ return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 unused_frac_mask = GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0);
+ u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+ u32 div;
+
+ do_div(temp, rate);
+ div = temp;
+
+ /* Round and mask off the unused bits */
+ if (unused_frac_mask != 0) {
+ div += unused_frac_mask >> 1;
+ div &= ~unused_frac_mask;
+ }
+
+ /* Clamp to the limits. */
+ div = max(div, unused_frac_mask + 1);
+ div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+ CM_DIV_FRAC_BITS - data->frac_bits));
+
+ return div;
+}
+
+static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+ unsigned long parent_rate,
+ u32 div)
+{
+ const struct bcm2835_clock_data *data = clock->data;
+ u64 temp;
+
+ /*
+ * The divisor is a 12.12 fixed point field, but only some of
+ * the bits are populated in any given clock.
+ */
+ div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+ div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+ if (div == 0)
+ return 0;
+
+ temp = (u64)parent_rate << data->frac_bits;
+
+ do_div(temp, div);
+
+ return temp;
+}
+
+static long bcm2835_clock_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate);
+
+ return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 div = cprman_read(cprman, data->div_reg);
+
+ return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+
+ while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+ if (ktime_after(ktime_get(), timeout)) {
+ dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+ clk_hw_get_name(&clock->hw));
+ return;
+ }
+ cpu_relax();
+ }
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ spin_lock(&cprman->regs_lock);
+ cprman_write(cprman, data->ctl_reg,
+ cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+ spin_unlock(&cprman->regs_lock);
+
+ /* BUSY will remain high until the divider completes its cycle. */
+ bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+
+ spin_lock(&cprman->regs_lock);
+ cprman_write(cprman, data->ctl_reg,
+ cprman_read(cprman, data->ctl_reg) |
+ CM_ENABLE |
+ CM_GATE);
+ spin_unlock(&cprman->regs_lock);
+
+ return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+ struct bcm2835_cprman *cprman = clock->cprman;
+ const struct bcm2835_clock_data *data = clock->data;
+ u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+
+ cprman_write(cprman, data->div_reg, div);
+
+ return 0;
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+ .is_prepared = bcm2835_clock_is_on,
+ .prepare = bcm2835_clock_on,
+ .unprepare = bcm2835_clock_off,
+ .recalc_rate = bcm2835_clock_get_rate,
+ .set_rate = bcm2835_clock_set_rate,
+ .round_rate = bcm2835_clock_round_rate,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+ return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+ .is_prepared = bcm2835_vpu_clock_is_on,
+ .recalc_rate = bcm2835_clock_get_rate,
+ .set_rate = bcm2835_clock_set_rate,
+ .round_rate = bcm2835_clock_round_rate,
+};
+
+static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+ const struct bcm2835_pll_data *data)
+{
+ struct bcm2835_pll *pll;
+ struct clk_init_data init;
+
+ memset(&init, 0, sizeof(init));
+
+ /* All of the PLLs derive from the external oscillator. */
+ init.parent_names = &cprman->osc_name;
+ init.num_parents = 1;
+ init.name = data->name;
+ init.ops = &bcm2835_pll_clk_ops;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return NULL;
+
+ pll->cprman = cprman;
+ pll->data = data;
+ pll->hw.init = &init;
+
+ return devm_clk_register(cprman->dev, &pll->hw);
+}
+
+static struct clk *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+ const struct bcm2835_pll_divider_data *data)
+{
+ struct bcm2835_pll_divider *divider;
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *divider_name;
+
+ if (data->fixed_divider != 1) {
+ divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+ "%s_prediv", data->name);
+ if (!divider_name)
+ return NULL;
+ } else {
+ divider_name = data->name;
+ }
+
+ memset(&init, 0, sizeof(init));
+
+ init.parent_names = &data->source_pll->name;
+ init.num_parents = 1;
+ init.name = divider_name;
+ init.ops = &bcm2835_pll_divider_clk_ops;
+ init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+
+ divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
+ if (!divider)
+ return NULL;
+
+ divider->div.reg = cprman->regs + data->a2w_reg;
+ divider->div.shift = A2W_PLL_DIV_SHIFT;
+ divider->div.width = A2W_PLL_DIV_BITS;
+ divider->div.flags = 0;
+ divider->div.lock = &cprman->regs_lock;
+ divider->div.hw.init = &init;
+ divider->div.table = NULL;
+
+ divider->cprman = cprman;
+ divider->data = data;
+
+ clk = devm_clk_register(cprman->dev, &divider->div.hw);
+ if (IS_ERR(clk))
+ return clk;
+
+ /*
+ * PLLH's channels have a fixed divide by 10 afterwards, which
+ * is what our consumers are actually using.
+ */
+ if (data->fixed_divider != 1) {
+ return clk_register_fixed_factor(cprman->dev, data->name,
+ divider_name,
+ CLK_SET_RATE_PARENT,
+ 1,
+ data->fixed_divider);
+ }
+
+ return clk;
+}
+
+static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+ const struct bcm2835_clock_data *data)
+{
+ struct bcm2835_clock *clock;
+ struct clk_init_data init;
+ const char *parent;
+
+ /*
+ * Most of the clock generators have a mux field, so we
+ * instantiate a generic mux as our parent to handle it.
+ */
+ if (data->num_mux_parents) {
+ const char *parents[1 << CM_SRC_BITS];
+ int i;
+
+ parent = devm_kasprintf(cprman->dev, GFP_KERNEL,
+ "mux_%s", data->name);
+ if (!parent)
+ return NULL;
+
+ /*
+ * Replace our "xosc" references with the oscillator's
+ * actual name.
+ */
+ for (i = 0; i < data->num_mux_parents; i++) {
+ if (strcmp(data->parents[i], "xosc") == 0)
+ parents[i] = cprman->osc_name;
+ else
+ parents[i] = data->parents[i];
+ }
+
+ clk_register_mux(cprman->dev, parent,
+ parents, data->num_mux_parents,
+ CLK_SET_RATE_PARENT,
+ cprman->regs + data->ctl_reg,
+ CM_SRC_SHIFT, CM_SRC_BITS,
+ 0, &cprman->regs_lock);
+ } else {
+ parent = data->parents[0];
+ }
+
+ memset(&init, 0, sizeof(init));
+ init.parent_names = &parent;
+ init.num_parents = 1;
+ init.name = data->name;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ if (data->is_vpu_clock) {
+ init.ops = &bcm2835_vpu_clock_clk_ops;
+ } else {
+ init.ops = &bcm2835_clock_clk_ops;
+ init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+ }
+
+ clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+ if (!clock)
+ return NULL;
+
+ clock->cprman = cprman;
+ clock->data = data;
+ clock->hw.init = &init;
+
+ return devm_clk_register(cprman->dev, &clock->hw);
+}
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk **clks;
+ struct bcm2835_cprman *cprman;
+ struct resource *res;
+
+ cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
+ if (!cprman)
+ return -ENOMEM;
+
+ spin_lock_init(&cprman->regs_lock);
+ cprman->dev = dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ cprman->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cprman->regs))
+ return PTR_ERR(cprman->regs);
+
+ cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0);
+ if (!cprman->osc_name)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, cprman);
+
+ cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
+ cprman->onecell.clks = cprman->clks;
+ clks = cprman->clks;
+
+ clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
+ clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
+ clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
+ clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
+ clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);
+
+ clks[BCM2835_PLLA_CORE] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
+ clks[BCM2835_PLLA_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
+ clks[BCM2835_PLLC_CORE0] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
+ clks[BCM2835_PLLC_CORE1] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
+ clks[BCM2835_PLLC_CORE2] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
+ clks[BCM2835_PLLC_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
+ clks[BCM2835_PLLD_CORE] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
+ clks[BCM2835_PLLD_PER] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
+ clks[BCM2835_PLLH_RCAL] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
+ clks[BCM2835_PLLH_AUX] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
+ clks[BCM2835_PLLH_PIX] =
+ bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);
+
+ clks[BCM2835_CLOCK_TIMER] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
+ clks[BCM2835_CLOCK_OTP] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
+ clks[BCM2835_CLOCK_TSENS] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
+ clks[BCM2835_CLOCK_VPU] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
+ clks[BCM2835_CLOCK_V3D] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+ clks[BCM2835_CLOCK_ISP] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
+ clks[BCM2835_CLOCK_H264] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
+ clks[BCM2835_CLOCK_V3D] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+ clks[BCM2835_CLOCK_SDRAM] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
+ clks[BCM2835_CLOCK_UART] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
+ clks[BCM2835_CLOCK_VEC] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
+ clks[BCM2835_CLOCK_HSM] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
+ clks[BCM2835_CLOCK_EMMC] =
+ bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);
+
+ /*
+ * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+ * you have the debug bit set in the power manager, which we
+ * don't bother exposing) are individual gates off of the
+ * non-stop vpu clock.
+ */
+ clks[BCM2835_CLOCK_PERI_IMAGE] =
+ clk_register_gate(dev, "peri_image", "vpu",
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ cprman->regs + CM_PERIICTL, CM_GATE_BIT,
+ 0, &cprman->regs_lock);
+
+ return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
+ &cprman->onecell);
+}
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+ { .compatible = "brcm,bcm2835-cprman", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+ .driver = {
+ .name = "bcm2835-clk",
+ .of_match_table = bcm2835_clk_of_match,
+ },
+ .probe = bcm2835_clk_probe,
+};
+
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 clock driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
deleted file mode 100644
index dd295e498309..000000000000
--- a/drivers/clk/clk-bcm2835.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/clk/bcm2835.h>
-#include <linux/of.h>
-
-/*
- * These are fixed clocks. They're probably not all root clocks and it may
- * be possible to turn them on and off but until this is mapped out better
- * it's the only way they can be used.
- */
-void __init bcm2835_init_clocks(void)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
- 126000000);
- if (IS_ERR(clk))
- pr_err("apb_pclk not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
- 3000000);
- if (IS_ERR(clk))
- pr_err("uart0_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20201000.uart");
- if (ret)
- pr_err("uart0_pclk alias not registered\n");
-
- clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
- 125000000);
- if (IS_ERR(clk))
- pr_err("uart1_pclk not registered\n");
- ret = clk_register_clkdev(clk, NULL, "20215000.uart");
- if (ret)
- pr_err("uart1_pclk alias not registered\n");
-}
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
new file mode 100644
index 000000000000..d323efac7edf
--- /dev/null
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define BCM2835_PLLA 0
+#define BCM2835_PLLB 1
+#define BCM2835_PLLC 2
+#define BCM2835_PLLD 3
+#define BCM2835_PLLH 4
+
+#define BCM2835_PLLA_CORE 5
+#define BCM2835_PLLA_PER 6
+#define BCM2835_PLLB_ARM 7
+#define BCM2835_PLLC_CORE0 8
+#define BCM2835_PLLC_CORE1 9
+#define BCM2835_PLLC_CORE2 10
+#define BCM2835_PLLC_PER 11
+#define BCM2835_PLLD_CORE 12
+#define BCM2835_PLLD_PER 13
+#define BCM2835_PLLH_RCAL 14
+#define BCM2835_PLLH_AUX 15
+#define BCM2835_PLLH_PIX 16
+
+#define BCM2835_CLOCK_TIMER 17
+#define BCM2835_CLOCK_OTP 18
+#define BCM2835_CLOCK_UART 19
+#define BCM2835_CLOCK_VPU 20
+#define BCM2835_CLOCK_V3D 21
+#define BCM2835_CLOCK_ISP 22
+#define BCM2835_CLOCK_H264 23
+#define BCM2835_CLOCK_VEC 24
+#define BCM2835_CLOCK_HSM 25
+#define BCM2835_CLOCK_SDRAM 26
+#define BCM2835_CLOCK_TSENS 27
+#define BCM2835_CLOCK_EMMC 28
+#define BCM2835_CLOCK_PERI_IMAGE 29
+
+#define BCM2835_CLOCK_COUNT 30