summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2009-09-16 01:44:00 +0400
committerKumar Gala <galak@kernel.crashing.org>2009-11-12 06:43:30 +0300
commit8c68e2f7885b22f0a63bf087752a46b690d6b6ea (patch)
tree5dcb238c4bb85f43ab46d9c33ad3c060824773cf
parent3cfee0aaa1c7767e1b85272a0621e3a78ece7879 (diff)
downloadlinux-8c68e2f7885b22f0a63bf087752a46b690d6b6ea.tar.xz
powerpc/86xx: Add power management support for MPC8610HPCD boards
This patch adds needed nodes and properties to support suspend/resume on the MPC8610HPCD boards. There is a dedicated switch (SW9) that is used to wake up the boards. By default the SW9 button is routed to IRQ8, but could be re-routed (via PIXIS) to sreset. With 'no_console_suspend' kernel command line argument specified, the board is also able to wakeup upon serial port input. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> [dts] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/board.txt4
-rw-r--r--arch/powerpc/boot/dts/mpc8610_hpcd.dts26
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c48
3 files changed, 74 insertions, 4 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index e8b5bc24d0ac..39e941515a36 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -20,12 +20,16 @@ Required properities:
- compatible : should be "fsl,fpga-pixis".
- reg : should contain the address and the length of the FPPGA register
set.
+- interrupt-parent: should specify phandle for the interrupt controller.
+- interrupts : should specify event (wakeup) IRQ.
Example (MPC8610HPCD):
board-control@e8000000 {
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
};
* Freescale BCSR GPIO banks
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index f468d215f716..9535ce68caae 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -35,6 +35,8 @@
i-cache-line-size = <32>;
d-cache-size = <32768>; // L1
i-cache-size = <32768>; // L1
+ sleep = <&pmc 0x00008000 0 // core
+ &pmc 0x00004000 0>; // timebase
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
@@ -60,6 +62,7 @@
5 0 0xe8480000 0x00008000
6 0 0xe84c0000 0x00008000
3 0 0xe8000000 0x00000020>;
+ sleep = <&pmc 0x08000000 0>;
flash@0,0 {
compatible = "cfi-flash";
@@ -105,6 +108,8 @@
compatible = "fsl,fpga-pixis";
reg = <3 0 0x20>;
ranges = <0 3 0 0x20>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
sdcsr_pio: gpio-controller@a {
#gpio-cells = <2>;
@@ -163,6 +168,7 @@
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000004 0>;
dfsrr;
};
@@ -174,6 +180,7 @@
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000002 0>;
};
serial1: serial@4600 {
@@ -184,6 +191,7 @@
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000008 0>;
};
spi@7000 {
@@ -196,6 +204,7 @@
interrupt-parent = <&mpic>;
mode = "cpu";
gpios = <&sdcsr_pio 7 0>;
+ sleep = <&pmc 0x00000800 0>;
mmc-slot@0 {
compatible = "fsl,mpc8610hpcd-mmc-slot",
@@ -213,6 +222,7 @@
reg = <0x2c000 100>;
interrupts = <72 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x04000000 0>;
};
mpic: interrupt-controller@40000 {
@@ -241,9 +251,18 @@
};
global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,mpc8610-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8610-pmc",
+ "fsl,mpc8641d-pmc";
+ reg = <0x70 0x20>;
+ };
};
wdt@e4000 {
@@ -262,6 +281,7 @@
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x08000000>;
};
ssi@16100 {
@@ -271,6 +291,7 @@
interrupt-parent = <&mpic>;
interrupts = <63 2>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x04000000>;
};
dma@21300 {
@@ -280,6 +301,7 @@
cell-index = <0>;
reg = <0x21300 0x4>; /* DMA general status register */
ranges = <0x0 0x21100 0x200>;
+ sleep = <&pmc 0x00000400 0>;
dma00: dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
@@ -322,6 +344,7 @@
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
+ sleep = <&pmc 0x00000200 0>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
@@ -369,6 +392,7 @@
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+ sleep = <&pmc 0x80000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
@@ -398,6 +422,7 @@
bus-range = <1 3>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ sleep = <&pmc 0x40000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
@@ -474,6 +499,7 @@
0x0000 0 0 4 &mpic 7 1>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
+ sleep = <&pmc 0x20000000 0>;
clock-frequency = <33333333>;
};
};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 627908a4cd77..5abe137f6309 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -19,6 +19,7 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
@@ -41,10 +42,46 @@
#include "mpc86xx.h"
+static struct device_node *pixis_node;
static unsigned char *pixis_bdcfg0, *pixis_arch;
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+ pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+ return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+ int irq;
+ int ret;
+
+ if (!pixis_node)
+ return;
+
+ irq = irq_of_parse_and_map(pixis_node, 0);
+ if (!irq) {
+ pr_err("%s: can't map pixis event IRQ.\n", __func__);
+ return;
+ }
+
+ ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+ if (ret) {
+ pr_err("%s: can't request pixis event IRQ: %d\n",
+ __func__, ret);
+ irq_dispose_mapping(irq);
+ }
+
+ enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "fsl,mpc8610-guts", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}
@@ -55,6 +92,9 @@ static int __init mpc8610_declare_of_platform_devices(void)
/* Firstly, register PIXIS GPIOs. */
simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+ /* Enable wakeup on PIXIS' event IRQ. */
+ mpc8610_suspend_init();
+
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
@@ -250,10 +290,10 @@ static void __init mpc86xx_hpcd_setup_arch(void)
diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
#endif
- np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
- if (np) {
- of_address_to_resource(np, 0, &r);
- of_node_put(np);
+ pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+ if (pixis_node) {
+ of_address_to_resource(pixis_node, 0, &r);
+ of_node_put(pixis_node);
pixis = ioremap(r.start, 32);
if (!pixis) {
printk(KERN_ERR "Err: can't map FPGA cfg register!\n");