summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAaron Lu <aaron.lu@intel.com>2017-09-07 02:24:57 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-07 03:27:30 +0300
commita2468cc9bfdff6139f59ca896671e5819ff5f94a (patch)
treebd1d326088483afddbbec76be18bc2558d74b6c4
parentda99ecf117fce6570bd3989263d68ee0007e1249 (diff)
downloadlinux-a2468cc9bfdff6139f59ca896671e5819ff5f94a.tar.xz
swap: choose swap device according to numa node
If the system has more than one swap device and swap device has the node information, we can make use of this information to decide which swap device to use in get_swap_pages() to get better performance. The current code uses a priority based list, swap_avail_list, to decide which swap device to use and if multiple swap devices share the same priority, they are used round robin. This patch changes the previous single global swap_avail_list into a per-numa-node list, i.e. for each numa node, it sees its own priority based list of available swap devices. Swap device's priority can be promoted on its matching node's swap_avail_list. The current swap device's priority is set as: user can set a >=0 value, or the system will pick one starting from -1 then downwards. The priority value in the swap_avail_list is the negated value of the swap device's due to plist being sorted from low to high. The new policy doesn't change the semantics for priority >=0 cases, the previous starting from -1 then downwards now becomes starting from -2 then downwards and -1 is reserved as the promoted value. Take 4-node EX machine as an example, suppose 4 swap devices are available, each sit on a different node: swapA on node 0 swapB on node 1 swapC on node 2 swapD on node 3 After they are all swapped on in the sequence of ABCD. Current behaviour: their priorities will be: swapA: -1 swapB: -2 swapC: -3 swapD: -4 And their position in the global swap_avail_list will be: swapA -> swapB -> swapC -> swapD prio:1 prio:2 prio:3 prio:4 New behaviour: their priorities will be(note that -1 is skipped): swapA: -2 swapB: -3 swapC: -4 swapD: -5 And their positions in the 4 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ swapA -> swapB -> swapC -> swapD prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ swapB -> swapA -> swapC -> swapD prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ swapC -> swapA -> swapB -> swapD prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ swapD -> swapA -> swapB -> swapC prio:1 prio:2 prio:3 prio:4 To see the effect of the patch, a test that starts N process, each mmap a region of anonymous memory and then continually write to it at random position to trigger both swap in and out is used. On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives are used as swap devices with each attached to a different node, the result is: runtime=30m/processes=32/total test size=128G/each process mmap region=4G kernel throughput vanilla 13306 auto-binding 15169 +14% runtime=30m/processes=64/total test size=128G/each process mmap region=2G kernel throughput vanilla 11885 auto-binding 14879 +25% [aaron.lu@intel.com: v2] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com [akpm@linux-foundation.org: use kmalloc_array()] Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: "Chen, Tim C" <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--Documentation/vm/swap_numa.txt69
-rw-r--r--include/linux/swap.h2
-rw-r--r--mm/swapfile.c120
3 files changed, 164 insertions, 27 deletions
diff --git a/Documentation/vm/swap_numa.txt b/Documentation/vm/swap_numa.txt
new file mode 100644
index 000000000000..d5960c9124f5
--- /dev/null
+++ b/Documentation/vm/swap_numa.txt
@@ -0,0 +1,69 @@
+Automatically bind swap device to numa node
+-------------------------------------------
+
+If the system has more than one swap device and swap device has the node
+information, we can make use of this information to decide which swap
+device to use in get_swap_pages() to get better performance.
+
+
+How to use this feature
+-----------------------
+
+Swap device has priority and that decides the order of it to be used. To make
+use of automatically binding, there is no need to manipulate priority settings
+for swap devices. e.g. on a 2 node machine, assume 2 swap devices swapA and
+swapB, with swapA attached to node 0 and swapB attached to node 1, are going
+to be swapped on. Simply swapping them on by doing:
+# swapon /dev/swapA
+# swapon /dev/swapB
+
+Then node 0 will use the two swap devices in the order of swapA then swapB and
+node 1 will use the two swap devices in the order of swapB then swapA. Note
+that the order of them being swapped on doesn't matter.
+
+A more complex example on a 4 node machine. Assume 6 swap devices are going to
+be swapped on: swapA and swapB are attached to node 0, swapC is attached to
+node 1, swapD and swapE are attached to node 2 and swapF is attached to node3.
+The way to swap them on is the same as above:
+# swapon /dev/swapA
+# swapon /dev/swapB
+# swapon /dev/swapC
+# swapon /dev/swapD
+# swapon /dev/swapE
+# swapon /dev/swapF
+
+Then node 0 will use them in the order of:
+swapA/swapB -> swapC -> swapD -> swapE -> swapF
+swapA and swapB will be used in a round robin mode before any other swap device.
+
+node 1 will use them in the order of:
+swapC -> swapA -> swapB -> swapD -> swapE -> swapF
+
+node 2 will use them in the order of:
+swapD/swapE -> swapA -> swapB -> swapC -> swapF
+Similaly, swapD and swapE will be used in a round robin mode before any
+other swap devices.
+
+node 3 will use them in the order of:
+swapF -> swapA -> swapB -> swapC -> swapD -> swapE
+
+
+Implementation details
+----------------------
+
+The current code uses a priority based list, swap_avail_list, to decide
+which swap device to use and if multiple swap devices share the same
+priority, they are used round robin. This change here replaces the single
+global swap_avail_list with a per-numa-node list, i.e. for each numa node,
+it sees its own priority based list of available swap devices. Swap
+device's priority can be promoted on its matching node's swap_avail_list.
+
+The current swap device's priority is set as: user can set a >=0 value,
+or the system will pick one starting from -1 then downwards. The priority
+value in the swap_avail_list is the negated value of the swap device's
+due to plist being sorted from low to high. The new policy doesn't change
+the semantics for priority >=0 cases, the previous starting from -1 then
+downwards now becomes starting from -2 then downwards and -1 is reserved
+as the promoted value. So if multiple swap devices are attached to the same
+node, they will all be promoted to priority -1 on that node's plist and will
+be used round robin before any other swap devices.
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 9c4ae6f14eea..8bf3487fb204 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -212,7 +212,7 @@ struct swap_info_struct {
unsigned long flags; /* SWP_USED etc: see above */
signed short prio; /* swap priority of this type */
struct plist_node list; /* entry in swap_active_head */
- struct plist_node avail_list; /* entry in swap_avail_head */
+ struct plist_node avail_lists[MAX_NUMNODES];/* entry in swap_avail_heads */
signed char type; /* strange name for an index */
unsigned int max; /* extent of the swap_map */
unsigned char *swap_map; /* vmalloc'ed array of usage counts */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 4f8b3e08a547..d483278ee35b 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -60,7 +60,7 @@ atomic_long_t nr_swap_pages;
EXPORT_SYMBOL_GPL(nr_swap_pages);
/* protected with swap_lock. reading in vm_swap_full() doesn't need lock */
long total_swap_pages;
-static int least_priority;
+static int least_priority = -1;
static const char Bad_file[] = "Bad swap file entry ";
static const char Unused_file[] = "Unused swap file entry ";
@@ -85,7 +85,7 @@ PLIST_HEAD(swap_active_head);
* is held and the locking order requires swap_lock to be taken
* before any swap_info_struct->lock.
*/
-static PLIST_HEAD(swap_avail_head);
+struct plist_head *swap_avail_heads;
static DEFINE_SPINLOCK(swap_avail_lock);
struct swap_info_struct *swap_info[MAX_SWAPFILES];
@@ -592,6 +592,21 @@ new_cluster:
return found_free;
}
+static void __del_from_avail_list(struct swap_info_struct *p)
+{
+ int nid;
+
+ for_each_node(nid)
+ plist_del(&p->avail_lists[nid], &swap_avail_heads[nid]);
+}
+
+static void del_from_avail_list(struct swap_info_struct *p)
+{
+ spin_lock(&swap_avail_lock);
+ __del_from_avail_list(p);
+ spin_unlock(&swap_avail_lock);
+}
+
static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
@@ -605,12 +620,22 @@ static void swap_range_alloc(struct swap_info_struct *si, unsigned long offset,
if (si->inuse_pages == si->pages) {
si->lowest_bit = si->max;
si->highest_bit = 0;
- spin_lock(&swap_avail_lock);
- plist_del(&si->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ del_from_avail_list(si);
}
}
+static void add_to_avail_list(struct swap_info_struct *p)
+{
+ int nid;
+
+ spin_lock(&swap_avail_lock);
+ for_each_node(nid) {
+ WARN_ON(!plist_node_empty(&p->avail_lists[nid]));
+ plist_add(&p->avail_lists[nid], &swap_avail_heads[nid]);
+ }
+ spin_unlock(&swap_avail_lock);
+}
+
static void swap_range_free(struct swap_info_struct *si, unsigned long offset,
unsigned int nr_entries)
{
@@ -623,13 +648,8 @@ static void swap_range_free(struct swap_info_struct *si, unsigned long offset,
bool was_full = !si->highest_bit;
si->highest_bit = end;
- if (was_full && (si->flags & SWP_WRITEOK)) {
- spin_lock(&swap_avail_lock);
- WARN_ON(!plist_node_empty(&si->avail_list));
- if (plist_node_empty(&si->avail_list))
- plist_add(&si->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
- }
+ if (was_full && (si->flags & SWP_WRITEOK))
+ add_to_avail_list(si);
}
atomic_long_add(nr_entries, &nr_swap_pages);
si->inuse_pages -= nr_entries;
@@ -910,6 +930,7 @@ int get_swap_pages(int n_goal, bool cluster, swp_entry_t swp_entries[])
struct swap_info_struct *si, *next;
long avail_pgs;
int n_ret = 0;
+ int node;
/* Only single cluster request supported */
WARN_ON_ONCE(n_goal > 1 && cluster);
@@ -929,14 +950,15 @@ int get_swap_pages(int n_goal, bool cluster, swp_entry_t swp_entries[])
spin_lock(&swap_avail_lock);
start_over:
- plist_for_each_entry_safe(si, next, &swap_avail_head, avail_list) {
+ node = numa_node_id();
+ plist_for_each_entry_safe(si, next, &swap_avail_heads[node], avail_lists[node]) {
/* requeue si to after same-priority siblings */
- plist_requeue(&si->avail_list, &swap_avail_head);
+ plist_requeue(&si->avail_lists[node], &swap_avail_heads[node]);
spin_unlock(&swap_avail_lock);
spin_lock(&si->lock);
if (!si->highest_bit || !(si->flags & SWP_WRITEOK)) {
spin_lock(&swap_avail_lock);
- if (plist_node_empty(&si->avail_list)) {
+ if (plist_node_empty(&si->avail_lists[node])) {
spin_unlock(&si->lock);
goto nextsi;
}
@@ -946,7 +968,7 @@ start_over:
WARN(!(si->flags & SWP_WRITEOK),
"swap_info %d in list but !SWP_WRITEOK\n",
si->type);
- plist_del(&si->avail_list, &swap_avail_head);
+ __del_from_avail_list(si);
spin_unlock(&si->lock);
goto nextsi;
}
@@ -975,7 +997,7 @@ nextsi:
* swap_avail_head list then try it, otherwise start over
* if we have not gotten any slots.
*/
- if (plist_node_empty(&next->avail_list))
+ if (plist_node_empty(&next->avail_lists[node]))
goto start_over;
}
@@ -2410,10 +2432,24 @@ static int setup_swap_extents(struct swap_info_struct *sis, sector_t *span)
return generic_swapfile_activate(sis, swap_file, span);
}
+static int swap_node(struct swap_info_struct *p)
+{
+ struct block_device *bdev;
+
+ if (p->bdev)
+ bdev = p->bdev;
+ else
+ bdev = p->swap_file->f_inode->i_sb->s_bdev;
+
+ return bdev ? bdev->bd_disk->node_id : NUMA_NO_NODE;
+}
+
static void _enable_swap_info(struct swap_info_struct *p, int prio,
unsigned char *swap_map,
struct swap_cluster_info *cluster_info)
{
+ int i;
+
if (prio >= 0)
p->prio = prio;
else
@@ -2423,7 +2459,16 @@ static void _enable_swap_info(struct swap_info_struct *p, int prio,
* low-to-high, while swap ordering is high-to-low
*/
p->list.prio = -p->prio;
- p->avail_list.prio = -p->prio;
+ for_each_node(i) {
+ if (p->prio >= 0)
+ p->avail_lists[i].prio = -p->prio;
+ else {
+ if (swap_node(p) == i)
+ p->avail_lists[i].prio = 1;
+ else
+ p->avail_lists[i].prio = -p->prio;
+ }
+ }
p->swap_map = swap_map;
p->cluster_info = cluster_info;
p->flags |= SWP_WRITEOK;
@@ -2442,9 +2487,7 @@ static void _enable_swap_info(struct swap_info_struct *p, int prio,
* swap_info_struct.
*/
plist_add(&p->list, &swap_active_head);
- spin_lock(&swap_avail_lock);
- plist_add(&p->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ add_to_avail_list(p);
}
static void enable_swap_info(struct swap_info_struct *p, int prio,
@@ -2529,17 +2572,19 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
spin_unlock(&swap_lock);
goto out_dput;
}
- spin_lock(&swap_avail_lock);
- plist_del(&p->avail_list, &swap_avail_head);
- spin_unlock(&swap_avail_lock);
+ del_from_avail_list(p);
spin_lock(&p->lock);
if (p->prio < 0) {
struct swap_info_struct *si = p;
+ int nid;
plist_for_each_entry_continue(si, &swap_active_head, list) {
si->prio++;
si->list.prio--;
- si->avail_list.prio--;
+ for_each_node(nid) {
+ if (si->avail_lists[nid].prio != 1)
+ si->avail_lists[nid].prio--;
+ }
}
least_priority++;
}
@@ -2783,6 +2828,7 @@ static struct swap_info_struct *alloc_swap_info(void)
{
struct swap_info_struct *p;
unsigned int type;
+ int i;
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
@@ -2818,7 +2864,8 @@ static struct swap_info_struct *alloc_swap_info(void)
}
INIT_LIST_HEAD(&p->first_swap_extent.list);
plist_node_init(&p->list, 0);
- plist_node_init(&p->avail_list, 0);
+ for_each_node(i)
+ plist_node_init(&p->avail_lists[i], 0);
p->flags = SWP_USED;
spin_unlock(&swap_lock);
spin_lock_init(&p->lock);
@@ -3060,6 +3107,9 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!swap_avail_heads)
+ return -ENOMEM;
+
p = alloc_swap_info();
if (IS_ERR(p))
return PTR_ERR(p);
@@ -3645,3 +3695,21 @@ static void free_swap_count_continuations(struct swap_info_struct *si)
}
}
}
+
+static int __init swapfile_init(void)
+{
+ int nid;
+
+ swap_avail_heads = kmalloc_array(nr_node_ids, sizeof(struct plist_head),
+ GFP_KERNEL);
+ if (!swap_avail_heads) {
+ pr_emerg("Not enough memory for swap heads, swap is disabled\n");
+ return -ENOMEM;
+ }
+
+ for_each_node(nid)
+ plist_head_init(&swap_avail_heads[nid]);
+
+ return 0;
+}
+subsys_initcall(swapfile_init);