summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@mvista.com>2010-06-08 13:55:50 +0400
committerKumar Gala <galak@kernel.crashing.org>2010-08-04 23:16:01 +0400
commitdee9ad718b4f0009a4170c178f7171c7b1f06f92 (patch)
treeb59f6b169881cc084bf0914e9dbe53a6964070ba
parentbb863e85a74f0222f4486ddb1945ed9eb431d6c9 (diff)
downloadlinux-dee9ad718b4f0009a4170c178f7171c7b1f06f92.tar.xz
powerpc/85xx: Fix booting for P1021MDS boards
P1021 processors have no dedicated ROM to store the QE microcode, so the fimrware is stored externally, and it is U-Boot responsibility to load it. It might be that the board is booting without QE, e.g. currently U-Boot doesn't support QE for P1021MDS boards, which means that QE isn't initialized, and so the board hangs early at boot. This patch fixes the issue by marking QE as disabled and checking the state in the probing code. U-Boot should fixup the state if it initialized the QE. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--arch/powerpc/boot/dts/p1021mds.dts1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c43
2 files changed, 38 insertions, 6 deletions
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index 7fad2df25981..ad5b85269004 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -617,6 +617,7 @@
bus-frequency = <0>;
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
+ status = "disabled"; /* no firmware loaded */
qeic: interrupt-controller@80 {
interrupt-controller;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 35ab2b42d698..9dadcffd9947 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -158,6 +158,29 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
extern void __init mpc85xx_smp_init(void);
#endif
+#ifdef CONFIG_QUICC_ENGINE
+static struct of_device_id mpc85xx_qe_ids[] __initdata = {
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ { },
+};
+
+static void __init mpc85xx_publish_qe_devices(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return;
+ }
+
+ of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
+}
+#else
+static void __init mpc85xx_publish_qe_devices(void) { }
+#endif /* CONFIG_QUICC_ENGINE */
+
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
@@ -218,6 +241,11 @@ static void __init mpc85xx_mds_setup_arch(void)
return;
}
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return;
+ }
+
qe_reset();
of_node_put(np);
@@ -369,8 +397,6 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{ .compatible = "fsl,rapidio-delta", },
{ .compatible = "fsl,mpc8548-guts", },
@@ -382,8 +408,6 @@ static struct of_device_id p1021_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{},
};
@@ -395,16 +419,16 @@ static int __init mpc85xx_publish_devices(void)
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
- /* Publish the QE devices */
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
+ mpc85xx_publish_qe_devices();
return 0;
}
static int __init p1021_publish_devices(void)
{
- /* Publish the QE devices */
of_platform_bus_probe(NULL, p1021_ids, NULL);
+ mpc85xx_publish_qe_devices();
return 0;
}
@@ -443,12 +467,19 @@ static void __init mpc85xx_mds_pic_init(void)
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return;
+ }
+
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
+
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);